Upgrade to 2007

Mainstream maintenance for SAP B1 2005A SP1 will end on July 31. Will SAP stop to support clients with 2005A SP1?
The same questions regarding SQL2000. If some of the customers has SQL 2000 will SAP stop to support them?
Thanks,
Olga

Dear Olga,
Once mainstream maintenance will end for a certain SAP Business One Version there will be no patches delivered with bug fixes. Instead customers will be asked to upgrade to a new Version in case they encounter an issue which was fixed in the new Version.
As for SQL 2000 you know that from Version 2007 this is not supported by SAP meaning if there are any issues related to SQL 2000 the customer has to upgrade in order to resolve the issue as Microsoft will not provide and Patch or Service Packs for SQL 2000 to solve the issue.
In general it is always advisable to use the latest software in order to get full and the most efficient support.
Kind Regards,
Friederike Mundt
SAP Business One Forums Team.

Similar Messages

  • I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. I have put the leopard disk into the drive and all it does is make a weird noise and then spits the disk right back out. It doesn't do this with other disks. HELP

    I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?

    Yes. Try Amazon.
    Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
    Mac OS X v10.6 Snow Leopard - Technical Specifications
    Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
    If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
    Using Disk Utility to verify or repair disks
    Message was edited by: Carolyn

  • Can i upgrade exchange 2007 to exchange 2013 on same small business server 2008 machine?

    Hi,
    I have small business server 2008 with exchange 2007 installed in my organization,
    Now I need to upgrade exchange 2007 to exchange 2013 on same small business server 2008 standard edition.
    I already tried to upgrade but not successful.
    can i upgrade exchange 2007 to exchange 2013 on same small business server 2008 machine or any alternate through which it is possible.
    Please share any MS article if it not possible. 
    Thank you in advance
    Regards
    arun av

    Hi Arun,
    Its really great that you want to move and upgrade old Exchange to new Exchange server. The manual steps and guide is already recommended to you.
    Moreover, I would like to recommend you to use an automated tool to upgrade your Exchange server 2007 to exchange 2013.  I have tried and test tool to do Exchange Migration 2007 to 2013. You can follow the link 
    http://www.exchange2007to2013migration.exchangemigrationtool.com/. It will also help you to do Intra-Cross forest migration if you required.
    Hopefully my recommendation will surely help you.
    Thanks,
    Walter

  • Third party tools to upgrade sharepoint 2007 to sharepoint 2013

    I'm looking for third party tools that can be used to upgrade sharepoint 2007 to sharepoint 2013. Any suggestions?
    Thanks,
    JohnWeb

    Hi,
    To migrate from 2007 to 2013 directly.  I believe AvePoint and possibly Axceler have such products.
    https://social.technet.microsoft.com/Forums/office/en-US/f46e4593-1283-4aec-bd63-564779883ac8/upgrade-moss2007-to-sharepoint-2013?forum=sharepointadmin
    http://social.technet.microsoft.com/wiki/contents/articles/15743.sharepoint-2013-upgrading-from-sharepoint-2007-q-a.aspx
    http://www.threewill.com/the-final-four-or-five-sharepoint-migration-tools/
    Regards
    Prasad Tandel

  • Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

    Apart from backing up all docs, music, movies and pics, what else do I have to do before upgrading my 2007 24"iMac with 2.33 Core Duo/2 GB SDRAM and OSX 10.4.11 to Snow Leopard10.6.3? from

    In addition to the other suggestions, see:
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html

  • I recently upgraded my 2007 vintage iMac from the Leapord OS to Mavericks. Now my system runs extremely slow when I start my apps. I only have 2G RAM. Do I need to install more RAM or is this something else?

    I recently upgraded my 2007 vintage iMac from its original Leapord OS to the new Mavericks OS and now its really running slow. I've run disk utilities to confirm everything is ok from the hard drive standpoint ... but am wondering if this is simply a memory issue. I only have 2G of DDR2 SDRAM installed. Is there a minimum recommended for the Mavericks OS?  Any other recommendations?  Time to launch any app has more than tripled from what it was before the OS upgrade.

    A combination of things:
    1. Slower CPU and GPU.
    2. Not enough RAM installed.
    3. Upgraded from Leopard.
    I would have backed up my files, erased the hard drive, then reinstalled Snow Leopard. Downloaded Mavericks and upgraded Snow Leopard directly. Then I would restore my files.
    Upgrade your RAM to at least 4 GBs if supported by your model.
    Backup your files, then do the following:
    Install or Reinstall Mavericks or Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Error on schedule.aspx after upgrade from 2007

    Hi,
    i am upgrading from 2007 to 2013. Everything is fine exept i am having 2 issues :
    - i can't access (tried as admin and as project manager) the Schedule.aspx page i am getting the following message "you do not have sufficient permissions to view the specified page. Please contact your administrator for permissions to view this page."
    I checked the permissions on this PDP and as admin i have full control. In the ULS log i see the fololowing:
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     General                        4zb0 Medium   Error is: GeneralSecurityAccessDenied. Details: User does not have permission
    to this view. . Standard Information: PSI Entry Point:  Project User: domain\epmadmin Correlation Id: 1b87b36e-8852-e311-a152-00505686371e PWA Site URL:
    http://server/PWA SA Name: Project Server Service Application PSError: GeneralSecurityAccessDenied (20010) Project:d15ee648-155f-47cc-b9a0-27c15a6d8242 d3bf589c-118d-b0bd-6d96-82c5a55627a7
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     Server-side Project Operations aj4ii High     InitViewReportInfo ViewUid:e1c71617-f168-42cd-b01c-7225cf813f7a is not found. d3bf589c-118d-b0bd-6d96-82c5a55627a7
    11/21/2013 11:39:29.09  w3wp.exe (0x23A4)                        0x27F8 Project Server               
     General                        ahg2n Medium   The remote command PWAProjectGetProjectDetailsForGridJsonRemoteCommand encountered
    an unexpected exception. d3bf589c-118d-b0bd-6d96-82c5a55627a7
    - the second issue is: i can't open some projects in Project Pro 2013 i am getting the following error when opening:
    Job Type: Checkin
    Error ID: 9000(0x2328) could not checkin project. Please contact your system administrator to force checkin this project.
    Weird to get this error when trying to open a project (basicaly checking it out).
    I applied the March 12 2013 Update kb2768001 but did not help.
    Any help will be greatly appreciated.
    Regards,
    RD

    Hi,
    Ok i solved the Schedule.aspx issue: each user had to just simply change the view once they logged for the first time , refresh the page.
    I am still facing the issue of some projects not opening in Project Pro 2013: one thing i figured out is that these projects have mandatory fields that are empty: the fields were added after projects were created.
    Any idea how i can solve this ?
    Thx
    RD
    Hi RD,
    i have also done a Migration from Project 2007 to 2013, i have the same issue with the Schedule.aspx.
    Is there a way to solve the issue without to change the view for each user. We have 200+ users.
    thx tom

  • CLIENT NOT UPGRADING FROM 2007 TO 2012

    I HAVE ONE PRIMARY SITE, 1200+ CLINETS
    SOME CLIENTS UPGRADED FROM 2007 TO 2012 NO PROBLEM. OTHERS HAVE A MESSAGE IN THEIR LOG FILES .

    Hi,
    Have you reviewed the ccmsetup.log and client.msi.log?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Upgrading from 2007 to 2012 - Restoration of 2007 Storage

    We are in the process of revieiwing the upgrade process. Our main concern is the ability to use DPM 2012 to restore Backups that were created on DPM 2012.
    Is the restoration process supported by DPM2012.
    Thank you in advance for your answer.
    Will Sass
    Will S. 15 Years in this thing

    Hi,
    As long as you are upgrading along the way, then recovery points made on DPM 2007 will be available for restore on DPM 2012.
    The proper steps to upgrade from DPM 2007 to DPM 2012 are as follows:
    a) Patch SCDPM 2007 to newest patch level. (kb2250436)
    b) Save copy of DPM2007 SQL database (dpmbackup -db) - copy to network share.
    c) Un-install DPM 2007 - then Upgrade OS Windows 2003 to Windows 2008 - then to Windows 2008 R2.
    Upgrading a DPM Server to Windows Server 2008
    http://technet.microsoft.com/en-us/library/dd637098.aspx
    d) Install DPM2007 and install latest patch level. (kb2250436)
    e) Copy saved DPM 2007 DPMDB to local drive, then restore DPM 2007 DPMDB.
         (dpmsync -restoredb -dbloc c:\msdpm.bak)
         (dpmsync -sync)
    f) Upgrade SCDPM 2007 to DPM 2010 (Which automatcally included SQL upgrade)
    g) Patch SCDPM 2010 to newest update UR7 (kb2751231)
    h) Update the Agents to DPM 2010 agents
    I) Upgrade SCDPM 2010 to SCDPM 2012.
    j) Install latest DPM 2012 update UR3 (KB2756127)
    k) update the agents to DPM 2012 agents.
    L) Run CC on all data sources.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Outlook Intergration error after upgrade to 2007

    Hi all.
    One of our clients were upgraded to 2007. The upgrade went well...however, when you log into Business One... a window pops up..."Create default templates". when you click create it comes up with a message asking if you want to overwrite the existing templates. I clicked yes to all..
    Then an error message pops up "Failed to create template 'Executive Customer (by Business Partner)'
    When you click ok..it goes back to the 1st screen..
    Help...
    Thanks
    Jerusha

    Dear Jerusha,
    You are getting this issue as the index on user defined table [@BOOSTP] is not right. It does not
    include column U_Host.
    In order to try to resolve the issue, please follow the solution as per SAP Note : 1229026.
    https://service.sap.com/sap/support/notes/1229026
    Regards,
    Rakesh Pati
    SAP Business One Forum Team
    Edited by: Rakesh Pati on Jul 30, 2008 3:41 PM

  • Keine übereinstimmenden Datensätze gefunden seit Upgrade von 2007 auf 8.8.

    Hallo, seit dem Upgrade von 2007 auf 8.8 erhalten wir die Fehlermeldung bei der Erstellung der Eingangsrechnung dass
    "Keine übereinstimmenden Datensätze gefunden 'Sachkonten'(OACT)(ODBC-2028) "
    Ich habe bereits in der Sachkontenfindung nachgeschaut hier sind alle Konten hinterlegt. Rundung ist ebenfalls angehakt (seitens Kunden gewünscht).
    Die Frage ist nur warum dass seit dem Update nicht mehr funktioniert? Hat da jemand Erfahrung damit?
    Danke

    Hallo Nicholas,
    sorry, ich habe durch meinen Hinweis auf das Anzahlungsverrechnungskonto welches ich als 1.) deklarierte hatte, offensichtlich für mehr Verwirrung als für Hilfe gesorgt.
    Mein Hinweis unter 1.) hatte mehr als Hintergrund:
    "wenn Du schon mal dabei bist, dann fülle auch gleich dieses Feld, da das ggf. bei zukünftigen Transaktionen einen Fehler geben kann" ... und hat eigentlich mit meinem Hinweis unter 2.) gar nix zu tun :-((
    Wiederum hast Du die Frage nach dem Hinweis 2.) beantwortet - das entsprechend hinterlegte Abstimmkonto (hinter dem Button Abstimmkonto) ist auch als ein solches definiert. Ich kenne den von Dir beschriebenen Fehler, wenn das dort hinterlegte Konto kein Abstimmkonto ist.
    So hoffe ich, die Hinweise von Sebastian auf ggf. fehlende Sachkonten bei der Fracht oder in der Sachkontenfindung (z.B. bei Artikelgruppen oder Läger) helfen Dir den Fehler aufzuspüren. Sonst prüfe doch einmal ob Du alle hnterlegten Sachkonten (bei Artikelgruppen, Lager, Verkauf usw.) auch wirklcih über den goldenen Pfeil im Kontenplan findest (siehe auch erste Antwort auf deine Anfrage).
    Gruß,
    Heiko

  • Registry keys after SharePoint Upgrade from 2007 to 2010

    Hi,
    I'm working on a SharePoint Server 2010 Farm, where it has been upgraded from 2007, actually I don't have enough information about the history of this upgrade, but
    it seems it was an in-place upgrade, and the 12 Hive folder is still there.
    Looking at the Windows Registry, I found that Registry Entries for 2007 version is still there: ([HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared
    Tools\Web Server Extensions\12.0] ), one of those entries is named "SharePoint" and its value is "Installed".
    Is this a normal situation?
    We are trying to install an antivirus for SharePoint but the installation is keep failing the vendor is claiming that this is the issue (2007 registry entries), and
    that the upgrade have not been done successfully.
    The SharePoint 2010 farm is running perfectly, and I have ran a "LocalUpgradeStatus" command on one of the servers, the output is with no issues.
    I have checked below pages and everything is normal:
    Check product and patch installation status
    Review database status
    Check upgrade status
    Any thoughts? is it normal to have such old registry entries in place? shall I just clean them?
    What do you recommend in such situation?
    Hamza AlSughier

    Hi Hamza,
    It should be in-place upgrade for your environment, here is a workaround per the following similar post, please confirm with antivirus vendor if the 12 registry files and 12 hive cause this issue, if yes, then backup the 12 registry files and 12 hive, then
    after you installed the antivirus successfully you can add the keys back.
    Note, Please fully test in your testing environment firstly before touching the production, and production also needs to be fully backed up.
    https://social.technet.microsoft.com/Forums/en-US/0a3f0b25-49be-488c-ac11-0bfab0f3cbe1/do-you-recommend-remove-sharepoint-2007-after-upgrade-in-place-to-sharepoint-2010?forum=sharepointadminprevious
    Thanks
    Daniel Yang
    TechNet Community Support

  • CRM Upgrade to 2007

    Hi,
    We are currently on CRM 4.0 Version. We are planning for upgrade to 2007 in a few months. Is there any document which explains me what are the things which has to be done when the system is upgraded.
    Regards,
    Ravi G

    Hi Ravi,
    Please refer upgrade guide for CRM2007 application.
    You can find more information in the below link:
    https://websmp101.sap-ag.de/upgrade-crm
    Please refer CRM 2007 section.
    Hope this helps!
    Regards,
    Chethan
    Edited by: Chethan Kumar C M on Sep 24, 2009 3:52 PM

  • Best way to upgrade our 2007 MacBook Pro to use Final Cut Pro

    Hello All.
    We have a 2007 MacBook Pro with 2 gigs ram, 160 Gig Hard drive and a 2.4 Mhz Intel Processor, and a 500 Gig Firewire External Harddrive.
    Is it feasable to upgrade this Laptop to run Final cut Pro?
    My girlfriend will edit small projects,i.e. vacation footage in H.D, Family Photo/Film montages, etc... nothing major
    Any advice much appreciated.
    Thanx

    Yes, Thanx
    We will not be using FCP X,  I think we have FCP 7,8 or 9, Not sure.
    I was thinking about More Ram from Other World ComputingLike this one:
    http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S6GP/
    and maybe this Hardrive:
    http://eshop.macsales.com/item/Samsung/HNM101MBB/
    Just wanted some feedback about this, or other suggested hardware.

  • Upgrade exchange 2007 to exchange 2013 on SBS 2008

    Hi,
    I need to upgrade EX07 to EX13 on small business server 2008, So I am looking for the documents or steps which will help in Implementation.
    Thanks in advance!
    -av

    Hi,
    Any update about the issue?
    In-place upgrade is not possible. According to the MS article:
    When you're upgrading your existing Exchange 2007 organization to Exchange 2013, there's a period of time when Exchange 2007 and Exchange 2013 servers will coexist within your organization. You can maintain this mode for an indefinite period of time, or
    you can immediately complete the upgrade to Exchange 2013 by moving all resources from Exchange 2007 to Exchange 2013, and then decommissioning the Exchange 2007 servers. You have a coexistence scenario if the following conditions are true:
    Exchange 2013 is deployed in an existing Exchange organization.
    More than one version of Microsoft Exchange provides messaging services to the organization
    Upgrade from Exchange 2007 to Exchange 2013
    https://technet.microsoft.com/en-us/library/jj898581%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Upgrade Exchange 2007 sp1 to sp3

    Good day,
    I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
    that -  "    Organization Checks              ......................... FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Hub Transport Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Client Access Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Mailbox Role Checks              ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
    My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
    Regards,
    Brian

    Good day,
    I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
    that -  "    Organization Checks              ......................... FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Hub Transport Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Client Access Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Mailbox Role Checks              ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
    My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
    Regards,
    Brian
    Prepare the domains as required. You have to prep the forest first for SP3 before upgrading Exchange itself
    Follow all the instructions
    http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
    Prepare Active Directory and Domains
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Maybe you are looking for