Upgrade to 7.0.2 English Version showing Japanese Characters & Yen prices
I recently upgraded to iTunes 7.0.2. Since completing installation, I've noticed that the fonts within the iTunes Store interface are off and I'm noticing a lot more Japanese support (including a lot more spotlighted albums of Japanese singers). Along those lines, I'm also seeing "square blocks" instead of text as I'm running an English version of Windows XP Home...denoting a lack of support for Japanese Kanji characters. When I look to purchase something from the store, pricing is displayed in Yen.
I double-checked my settings to ensure that support was set for English, which it was. I attempted to repair iTunes via the Install package Repair interface. No errors were found. Finally, I uninstalled iTunes 7.0.2 and downloaded a fresh install package from apple.com. After a clean install, I'm seeing the same thing. Searching the message board has revealed no answers. Has anybody else seen this and, if so, were you able to correct it?
Windows XP
A re-install is not necessary. Simply go down to the bottom of the main store window, there is a small flag icon, click the drop down arrow & select the US store.
Similar Messages
-
Installing an English version on Japanese OS
I chose to doanload an English trial version (from the US site) to my laptop that is running a Japanese OS. When running the AdobeDownloadAssistant it installed the Japanese version instead of English one.
How can I select the English version during the installation?Some installers do that; sometimes setting the system locale to Japanese on English Windows will also install the software with the Japanese MUI.
What is the product you are trying to install? You may have better luck if you use the direct download from http://prodesigntools.com/tag/ddl instead of the download assistant. -
Showing Japanese characters from Report Builder
Hi , We've some problem showing the Japanese characters using Oracle Report builder 6i (6.0.8.17.0).
Our database version is Oracle9i-9.0.1.4.0 and
we'r using the DB character set as US7ASCII and National charecter set as UTF8 (Tried with AL16UTF16 but it's supported as per Oracle-metalink). We'r using Solaris 9 (OS 5.9) to invoke the Report Builder.
Japanese characters are able to insert and select from SQL prompt using Japanese Terminal..
But from the Report builder when we run the Report, we'r seeing some junk characters. Please help if anybody has worked on showing the Japanese characters from Report builder.
Thanks
-TN ReddyHi Vinod and Sripathy,
Thanks much for your feedback. We did some testing and it manage to get the results from txt/html/xml outputs but still have problem with post script format.We'r Checking this now..
The prblem was UTF-8 was installed at the OS level (solaris 9).
Anyway, Thank you very much.
Regards
-TN Reddy -
Can Microsoft Office 2010 (English) version install Chinese characters ?
I have problems to write and read Chinese as I only have the English Microsoft Office ? Can I do it ? If not, what's other recommendation ? Many thanks
Hi,
May I know what the problems to write and read Chinese are in detail? The Chinese characters don't display correctly?
If you want to switch between a Latin-based language (English, Spanish, or French) and a non-Latin-based language (Arabic or Chinese), use the Language bar:
http://office.microsoft.com/en-001/word-help/switch-between-different-languages-by-using-the-language-bar-HA010362283.aspx?CTT=5&origin=HA010354272
These articles below may also be helpful:
Switch between different languages as you type
http://office.microsoft.com/en-001/word-help/switch-between-different-languages-as-you-type-HA010362284.aspx
Change the default language for Office programs(Set the default input language section)
http://office.microsoft.com/en-001/outlook-help/change-the-default-language-for-office-programs-HA010356057.aspx
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I have drmwr mx 2004 edu I want to upgrade to cs3 , there's edu version ?
I have drmwr mx 2004 edu I want to upgrade to cs3 , there's
edu version ? tell me all prices(upgrade) ?Contact Adobe....
We are just users.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"123polis123" <[email protected]> wrote in
message
news:fnqf68$ipi$[email protected]..
>I have drmwr mx 2004 edu I want to upgrade to cs3 ,
there's edu version ?
>tell me all prices(upgrade) ? -
After upgrading to IOS 5 on my iPad only some books in iBooks show content. They were fine before the upgrade. I made a new version of the book in Pages and reinstalled them on the iPad. Still nothing. What is the fix?
I just got the iBooks update and that fixed the problem, except the book covers look like they were done in a government printing office.
-
My Ipod-touch was ios5 when I bought. You recommend to upgrade ios6, because set-up icon always shows me "+". For that on facebook I can't see wall photos. So I want my ipod touch to be back as initial version ios5. How can I do? please tell me.
Unfortunately, I don't think it solved the problem. I believed the new iPod thing solved the weird behavior problem, but after that the button stopped working.
Do you know how to contact Genius? Because I don't think I can find a store in my area, when I tried to. -
Tried upgrading to 10.8.2. It failed the upgrade. Currently the Software version shows " System Version:
OS X 10.8.1 (12B19)" . But App store does not show 10.8.2 as an updateYou can Contact MAS here.
-
I purchased an upgrade inside the free app, however it shows I paid for the free app & now I can not download the full version. What should I do?
Thanks!
KristineFinish the download on your computer in iTunes and then sync the app to the iPad and then delete it. You will probably have to let it fully download before you can delete it.
You can try restarting the iPad and see if the download will resume - Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Yoy can try this as well and see if the download will resume. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Look in iTunes and see if there is a pending download in there that might be causing the delay. If there is a download there, try to finish that one first. -
How To Upgrade My iPod? Version Showing Me 6.1.6.. Now New Version 8.1.2.. I Want To Download New Version. Help Me Please...
Sorry, you are running the highest iOS that you can
Cheers,
GB -
I have upgraded to latest version, but old version shows when i open Iphoto.
I have updated to the latest versions of iPhoto, but the old version shows when I open Iphoto. Buttons like layout and design options are unavailable ...What to do?
Well then you have the current version
I suspect you are looking at a web site showing a different view than you have chosen
LN -
is there an English version for the movie Flying Swords of Dragon Gate I just brought it from iTunes and got a sub title or can iTunes send something out its a great movie if you looking for action
http://portableapps.com/apps/internet/thunderbird_portable
While the Portableapps builds of Firefox and Thunderbird are not official, they are proven to be safe over several years. -
My serial number from version 5 shows up on download page so I can download Lightroom 6 at the upgrade price, but English vesion (where serial number is located) says "not applicable". I see I can download the multi language version, but I don't want that version.
How do I get the English version?Hi There,
If you have purchased Lightroom 5 in the past, then you have to purchase LR 6 seprately to use it, here is the link: Products
In order to get the trial, here is the link: https://www.adobe.com/products/photoshop-lightroom.html
This comparision link might also help you make up your mind : Compare Lightroom versions | Adobe Photoshop Lightroom CC
Thanks,
Atul Saini -
i upgraded my Itunes to the latest version and now it won't let me view my library with the column browser. Can i get that back? I tried using the shortcut for it and nothing happens. When I try to do it from the view menu, it shows up as something I can't click on. The new library format is driving me crazy and I just want to get back to the old library view.
We need to sort out some facts here first:
• You cannot be running Mt. Lion on your iMac G5. What Mac is it? What is the Model Identifier listed in About This Mac; More Info; Hardware Overview
• What is the model of your Epson Scanner?
• Have you attempted to scan using Image Capture, located in your Applications folder?
• Your Palm Pilot software will only run in Snow Leopard; so depending upon which Mac you have, you will either have to:
1) partition your hard drive or add an external hard drive and install Snow Leopard into it to "dual-boot" when you want to access you Palm software, or
2) install Snow Leopard Server (now available from Apple for $20 telephone orders USA & Canda only) into Parallels 8 to run your Palm software in Mt. Lion:
[click on image to enlarge] -
I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!
Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2
Maybe you are looking for
-
Overwriting the File in File Adapter
Hi All, I hav a module processor (in Receiver file Adapter)which checks the existence of the file by name DOWN.flg befor writing the file by the same name at the same location. if the file already exists, then it has to wait until another system dele
-
Im creating invoices in Excel and then trying to Save as.....to PDF, but when i open the ( Save as type box) there's no option for PDF. Can anyone help? Im running XP and have office 2003 I've uninstalled Adobe twice and re-installed, but still not g
-
Hi! What would be the simplest way to modify an SBO reprt? I have added a user field to OITM (item master data) and I want to modify the Sales Analysis report so that I have the field as one of the selections criteria for items. My idea is to put in
-
Hi all, I have a doubt with triggers. my synario is, I have to make 2 insets and a select(one after the other continuously). One of the two insert statements will fire a Trigger(AFTER INSERT Trigger) and do some manipulations on data.After this I use
-
HI All, we have downloaded ESA ECC.SE603 , Software component from Service Market Place in order to make use of Enterprise Service Bundles into PI. But unfortunately it is not getting displayed in SPROXY transaction of the backend system, where as I