Upgrade to 7.3.2 not possible

Hi all,
airport utility discovered a new firmware for my airport extreme. But after some minutes it always comes up with this (obviously wrong) message: -6753 "An error occurred when reading the configuration. Please make sure that your apple device is plugged in and in range of your computer or connected via Ethernet and try again." How could I write this without my airport plugged in and connected...
Any suggestions?
Best
Fernando

Hello,
Please check this. It is one of the known
EHP 6.0 update for ERP 6.0.
Thanks,
Jansi

Similar Messages

The upgrade of creative cloud is not possible because there is always the error code 204?

The upgrade of creative cloud is not possible because there is always the error code 204?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have an iPhone 3G. I want to be able to upgrade to IOS5 but this not possible now. Will this be possible in the near future?

I have an iPhone 3G. I want to be able to upgrade to IOS5 but this not possible now. Will this be possible in the near future?

No. The iPhone 3G is not physically capable of running anything higher than 4.2.1. It was discontinued 3 years ago.

Upgrading from SP1 to SP2 not possible?

Hi,
when installing CRRuntime_12_1_mlb.exe (Crystal Reports 2008) and after that CRRuntime_12_2_mlb.exe, there is an error message like "A different version of this product is already installed...cannot continue...." (translated from German). Why is that? Isn't it possible to upgrade?
Regards,
Florian
Edited by: floele on Aug 13, 2009 1:55 PM

It should be possible. Unfortunately, my testing indicates the following:
If you try to install CRRuntime_12_2_mlb.exe over CRRuntime_12_1_mlb.exe, you get the error.
Trying to update the runtime using the CRRuntime_12_1_mlb.msi results in the same error.
Same error is produced trying to update runtime installed by CRRuntime_12_1_mlb.msi and trying to update that with CRRuntime_12_2_mlb.msi.
Possible workarounds:
1) Preliminary test indicates that if you create your own setup project (setup.exe) or msi, the issue goes away.
2) Uninstall the runtime from the CRRuntime_12_1_mlb.* and do a new install using CRRuntime_12_2_mlb.*
This issue will be tracked with R&D for a resolution. I will update this thread once I have the tracking number.
Ludek

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.

I have not upgraded my Final Cut Pro in a while. Is it not possible to upgrade Final Cut Studio anymore? Do you have to buy the software seperate?

Is it not possible to upgrade Final Cut Studio as a whole? Do you have to now buy the software separately?

It is still possible to upgrade some versions of FCP, especially the Studios, As always, the upgrades apply to base versions that needed to be purchased. The latest version of Final Cut Studio is no longer for sale from Apple but it doesn't run on a PowerMac anyway. The only Final Cut Pro product currently for sale is Final Cut Pro X, which requires an Intel Mac.

I have Itunes on an external hard disk, now it's not possible to upgrade my Itunes.

I have an external hard disk drive for my Itunes. Until now it's always been possible to upgrade Itunes.
Now I keep getting message E-drive not found. The hard disk is on the F-drive. And I can't find where I need to select the correct drive before installing.
It seems that it's not possible to select the drive where you want to upgrade your Itunes.

For "Invalid Drive" errors when uninstalling or reinstalling try b noir's user tip:
"Invalid drive X:\" install errors.
For other problems see Troubleshooting issues with iTunes for Windows updates.
tt2

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Upgrade 7.9.07 BUILD 014-123-244-287 to 7.9.08.22 not possible

After upgrading to 7.9.08.08, it's not possible to upgrade to .22:
pagxen010:/mnt/BPO_Files/MAXDB/MAXDB7908_22/maxdb-server-linux-64bit-x86_64-7_9_08_22 # ./SDBUPD
SAP MaxDB Installation Manager - Database Upgrade 7.9.08.22
Upgrade Database:
0: UQ1 "/sapdb/UQ1/db" 7.9.08.08
1: None (Abort upgrade)
please enter database id: 0
Please enter Database Manager Operator: CONTROL
Please enter Database Manager Operator Password:
Checking upgrade...
Running finalize check...
Current database state is ONLINE
Switching database state to OFFLINE
Checking parameters...
Switching database state to ADMIN
Switching database state to ONLINE
ERR: Upgrade failed
ERR: error upgrading
ERR: Finalize upgrade failed: Current database state is ONLINE
Switching database state to OFFLINE
Checking parameters...
Switching database state to ADMIN
Switching database state to ONLINE
Cannot switch database mode, error during dbm command:
db_online
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables
failed-24909,ERR_DBAUNKNOWN: SYSDBA unknown
Looking for error messages in knldiag
No error messages found in knldiag
I tried to restore a backup, no effort. It seems like SUPERDBA isn't working any more, data cache can't be displayed as well.
Any suggestions?

Something seems wrong:
dbmcli on pagsapup1 : UP1>sql_execute select * from users
ERR
-24988,ERR_SQL: SQL error
-4004,Unknown table name or unknown schema:USERS
dbmcli on pagsapup1 : UP1>sql_execute select * from DOMAIN.USERS
ERR
-24988,ERR_SQL: SQL error
-4004,Unknown table name or unknown schema:USERS

'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)

Hi,
We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
But after upgradation, when we execute ZFORM16 for 2006 data we are getting the error message:
                         Required conversion not possible
Some analysis of the issue is:
1)     In include: ZPCF16IN3 at statement:    PERFORM read_temse.         " MDSNT927906
2)     It is going to include : ZPCF16IN8 we are getting the error message at the statement :
call function 'RSTS_READ'
The error message is: Required conversion not possible
When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form read_temse) and now SAP is using different logic to get the DETAILS OF TAX DEDUCTED.
If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS OF TAX DEDUCTED are not displayed. DETAILS OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
Can someone help me in solving the issue?
Regards,
Prem

We had to restart SAP & Oracle and the issue is solved

It's not possible upgrade master data via DTW in SBO 2007.

Hi to everybody,
I was trying to upgrade de BP master data via DTW, but its not possible. I cheched the chechbox "Update" but I got an error saying "This entry already exists in the following tables (ODBC - 2035)".
The change I try to do is in the address contact.
Thanks.
Daniel
Edited by: Philip Eller on Jun 20, 2008 10:32 AM

Hi Daniel Rivas,
Regarding this issue, please kindly check the following
-> Whether there are duplicated records in the import file. If there are two rows for the same name, please remove one of them and this file can then be imported successfully.
-> LineNum should be filled correctly. It should be sequential number which begins from the quantity of existing contact persons. For example if there are 10 contact persons for a specific BP, and you want to add another 10 new contact persons, the LineNumber should start from 10 to 19.
-> In DTW Wizard step 3, select the checkbox 'Add all Items into Schema if can't find corresponding item when updating' under Target Data tab. You can refer to Note 789315 for information on the functionality of this checkbox.
Hope this helps.
Regards, Summer
SAP Business One Forums Team

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Database is not integrated; upgrade not possible

Hi,
I am trying to upgrade a 2005B database to SAP 8.8 version using the PL04 Upgrade.exe. One of the steps makes a previous test for Upgrade and show me a message error: " Database is not integrated; upgrade not possible" for the components "Common-Database, Add-ons and Help".
Does anybody knows how I can solve this issues?
Regards and thanks for your help,
Alberto Franç

Hi
Refer below link
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001343050]
Thanks
Kevin

Upgrade still running logon not possible

Dear Experts,
We've upgraded our erp server ecc 5.0 to ecc 6.0 ehp1 via option downtime minimized option, before downtime phase we ve taken an offline backup, after upgrade completed succesfully
Now we have used this offline db backup for system copy to a new test system because customer want to save ecc 5.0 system too,
When we try to logon system we are getting following error, we can logon system via sap* user ;
upgrade still running logon not possible
How can we reset this upgrade on this new test system,
Best Regards

Dear Atakan,
Unlock the SAP-system at OS level with the following commands:
cd /<Upgrade-directory>/bin
   ..exe/tp unlocksys <SAPSID> pf=<transport profile>
   ..exe/tp unlock_eu <SAPSID> pf=<transport profile>
but if the copy system still is in the phase before downtime as this was when the backup was made, please following the upgrade guide section, resetting the prepare.
Regards,
Paul

HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al

Upgrade to 7.3.2 not possible

Similar Messages

Maybe you are looking for