Upgrade to 7.3.2 "...unexpected error occurred."

I'm trying to download the latest version of iTunes and I keep getting an error:
"The update 'iTunes' can't be installed.
Sorry, an unexpected error has occurred.
The Installer package has been moved to the Trash.
To try again, open the package from the Finder."
I tried it - no luck.
I tried repairing permissions - no luck.
I'm running a 4 x 2.5 G5 Quad, 10.4.10 and I've never had a problem like this.
Anyone?

Check out this thread. I found (from a different forum) that the appointments are still there, just the recurrence is messed up. You have to go back to the base appointment and re-setup the recurrence. (But you already fixed this with a backup)

Similar Messages

An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057)) After DPM 2012 SP1 to R2 Upgrade

Hi,
We have upgraded DPM 2012 SP1 to DPM 2012 R2 and OS is Windows 2012 standard.
Now in File Protection Group, we receive error
"An unexpected error occurred while the job was running. (ID 104 Details: The parameter is incorrect (0x80070057))".
This happens to only one Drive(X: Drive) of the PG server, other drive(Z: Drive) backup is working fine.
We tried,
Deleted entire protection group and recreated ,
Ran consistency job 2 to 3 times.
Ran Synchronize with consistency check.
But every time It failed. Before upgrade it was working fine.
Thanks

Hi
I would suggest opening a new case with MS to allow the DPM team to further look into the issue. Also the DPM 2012 R2 RollUp which addresses the (0x80070057)
issue is Rollup 1 and the private will not be needed after applying Rollup 1. The Roll up is found here
http://support.microsoft.com/kb/2904687/en-us
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your
question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn't be completed. Input/out

upgrading to osx 10.6.8 fails. I see errors in the /var/log/install.log of "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/out. Any thoughts on what is causing these errors and the upgrade failure?
Thanks

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

The operation can't be completed because an unexpected error occurred (error code -8060).

Hi,
I want to copy a folder from desktop to my document (or anywhere else on a MAC) I got this error "The operation can’t be completed because an unexpected error occurred (error code -8060)." everytime at the same position when it's about to finish (sth like 75%).
I have MBPR + Mountain Lion and the folder is a Xcode project if it helps.
BTW there is nothing in trash.
Thanks

Thanks but I solved this problem with this tip:
tba55
Re: Error when trying to copy one of my folders, or compress it in the finder
Aug 11, 2012 12:41 PM (in response to Maziyar)
I found some subdirectories within my Project folder that were complete duplicates of other directories. After deleting those, I no longer had the error. I don't know where they came from, but think they may have been created after an upgrade, say from Xcode 3.0 to 4.0 but don't remember. Anyway, don't know any more about it, only that it went away after I deleted those duplicate subfolders. Good luck !
I found unlimited folder in folder in my Xcode project folder that made the size from 285MB to 1.5G. It was that duplicate folders made this error.
I removed and it solved the problem.
Thanks

Windows Journal cannot open " ". An unexpected error occurred in Windows 7 Professional

I copied my Windows Journal Notes from a tablet with Windows XP Tablet PC edition onto my Windows 7 Computer. When I try to open a note from the pull down "look-in" menu within the Windows Journal program, I gives me the error
"Windows Journal Cannot open. An unexpected error occurred." I thought this was a problem with my computer, BUT have replicated this same error on every computer in Best Buy and other computer stores. This is not a problem with
my personal notes. This is a problem with the coding of the Windows Journal Software on Windows 7 and 8. It was also tested on a Vista computer with the same error.
Please, if someone knows how to fix this problem please let me know. I use Windows Journal exclusively on a tablet PC for my business and am afraid of upgrading from XP to Windows 7 or 8 unless I can see that the Win7 version of JOURNAL works properly
as the WinXP Tablet edition of Win Journal.
Note: I have tried recreating user profiles, sfc.exe, cleanboot, safe mode, chkdisk.... all failed. THE PROBLEM I BELIEVE IS THE ACTUAL CODE that is written for Windows Journal. ALL notes can be opend by hitting FILE-OPEN. However, if you
go to the "view recent notes" button and click on the "look-in" pull down menu within the Windows Journal program, you can not open the file through this. Because of the way I do my business, I need to look up various files quickly
and write notes after opening each note from the "look-in" pull down menu.
Please Help.

The problem seems to be that the "look-in" menu doesn't open the files which are located in the "Notes" folder. If I open the files through windows explorer in windows 7, the file opens into windows journal and appears in the look-in menu.
Another interesting thing occurs if you create an additional folder under my documents. I tested this on various computers in an electronic store: Windows Journal was working fine with the "look-in" menu; I was able to open various journal note
documents. Then, once I created another folder under My Documents and tried to open a journal note in that folder and then go back to the "notes" folder, I was able to replicate the same error message.
In short, it seems that once a new folder is created, the original folder "Notes" as well as the new folder, both do not allow for the files within them to be opened through the "look-in" menu. However, they may be opened from hitting FILE, then OPEN.
But, the "look-in" and Browse menu doesn't work.
Also, I looked in the Event Viewer and couldn't find anything in particular related to Win Journal. Please tell me what and where specifically to look in the Event Viewer --- I can't seem to find anything related to Windows Journal errors in the Event
Viewer.
Thank you.

'An unexpected error occurred' using AirPort Utility to configure an Extreme

Hi all, I've been fighting with this problem for a while. I have a 2011 Mac Mini running OS X 10.7.5 and AirPort Ulility 6.2. I also have a new-ish AirPort Extreme A1408. They've never really seemed to work properly together. The only way to configure the device is to manually launch the AirPort Utility, go "file > configure other" and enter the password "public" to log in and manually change the settings.
If I hard-reset (which I've been doing to troubleshoot another issue) and simply choose "Other AirPort Base Stations (1)" I can see my router in the drop-down. It goes through the process of gathering information and joining the default wireless network (I'm using the unsecured default right now as a matter of fact), but then the process ends with 'An unexpected error occurred'. Even with that message displayed, the default wi-fi connection stays up (clicking cancel kills the wi-fi connection immediately).
I can always go back through the "file > configure other" process and set it up manually, but then it never appears in the AirPort Utility as a connected base station - all I see is a green light for Internet and a "No configured base stations have been found" message.
Here's what I'm seeing in the Console:
13-05-25 11:12:27.000 PM kernel: MacAuthEvent en1 Auth result for: 20:c9:d0:20:4c:10 MAC AUTH succeeded
13-05-25 11:12:27.000 PM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-05-25 11:12:27.000 PM kernel: AirPort: Link Up on en1
13-05-25 11:12:27.000 PM kernel: en1: BSSID changed to 20:c9:d0:20:4c:10
13-05-25 11:12:27.889 PM configd: network configuration changed.
13-05-25 11:12:27.914 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-05-25 11:12:27.914 PM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2322 Bypassing probe on Apple Network 204c0f because signature is in the known good cache
13-05-25 11:12:27.915 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-05-25 11:12:27.923 PM configd: network configuration changed.
13-05-25 11:20:29.000 PM kernel: wlEvent: en1 en1 Link DOWN virtIf = 0
13-05-25 11:20:29.000 PM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-05-25 11:20:29.795 PM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-05-25 11:20:29.806 PM configd: network configuration changed.
Looks like after I open AirPort Utility, the connection to the default wireless network is established, the system goes to probe the base station, says "nope I know this guy already", then the process spits out the 'An unexpected error occurred' message, I click "cancel", and the link is dropped.
Does anyone know why my AirPort does this? Is it a network configuration setting somewhere in the Mac? I've had this thing for a while and of course decided to dive into the Apple ecosystem entirely dropping to a single Windows gaming rig, only to find that the special magic doesn't work for me

Read this please, before assuming your AirPort Extreme is broken. The links at the end will likely resolve your issues. First try to rollback your AirPort's firmware to 6.1.1, which should restore your Internet connectivity. If it does, but you'd rather have the most recent upgrade available, follow the steps given in the following links, 6.1.3 should work fine for you then.
After numerous attempts by apple IT reps to persuade me that my modem was somehow the cause of my AirPort Extreme broadcasted WiFi network suddenly losing connectivity after the 6.1.3update, I found the truth that helped me to correct my own problem, and successfully use 6.1.3 rather than the rolled back version 6.1 i had been forced to resort to.
If rolling back your Airport's firmware fixes your connectivity issue, or your dns server has been erased by the update to 6.1.3, I speculate that these links will help you out greatly.
It turned out, that this was A KNOWN ISSUE to Apple! With an actual fix Published by Apple themselves! They've just got it hidden away because they must have wanted to drive me to the brink of insanity. . Luckily for Apple I worked with an amazing rep *(Thelma) who at least acted as if she didn't think I was a crazy person. I found the fix on my own after 16 grueling, redundant and fruitless, hours of troubleshooting (time wasting) with "senior" Apple techs.
Let me tell you, 'I told you so' has never sounded so sweet. (Thelma) was ****** that no one in the company bothered to fill her in on this issue or solution and had her support send me a new AirPort just before I discovered the fix. After the discovery, she told me not to bother sending either back, and apologized for the run around that took up weeks of my life.
With out further ado and with thanks to Softpedia for posting the info-
http://news.softpedia.com/news/Airport-Time-Capsule-7-6-3-Affects-IPv6-Tunneling -328680.shtml
http://news.softpedia.com/news/Apple-Releases-Fix-for-IPv6-Tunnel-Error-Under-Ai rPort-7-6-3-331186.shtml
*name(s) changed to protect the competent
AirPort Extreme 802.11n (5th Gen), iOS 6.1.3
I have this question too (1) Reply Categories: Airport Extreme Tags: airport_extreme, firmware, airport, ipad, wifi, 4, router, extreme, multiple_devices, internet_access, update_error, dns_error, amber_light, no_dns, 6.1.1, roll_back, 6.1.3

An unexpected error occurred attempting to prepare your library

So I'm trying to use the new photos library, and I keep getting this error no matter what i do when importing my iPhoto library in:
An unexpected error occurred attempting to prepare your library (1,114)
Ive rebuilt the library in iPhoto, fixed permissions, and I'm almost to the point of just exporting everything, but i can't say I'm a huge fan of what Ive seen in photos so far, so I'm currently just using iPhoto. Is anyone else having issues importing their library from if to photos? I haven't even attempted to move apertures.

Same thing has happened to me. I'm using a MacBook Aluminum (Late 2008) upgraded to 8GB of RAM and 1TB HDD running Yosemite 10.10.3. I successfully set up the photo app on an admin account that has no photos, but had the same error on my main user account.
Troubleshooting attempted so far:
1. Closed the app then tried again - did not correct the error
2. Rebooted then tried opening Photo App - did not correct the error
3. Rebooted in "Safe Mode" and repaired disk permissions - did not correct the error
I'm currently copying all my photo's to an external HDD with the intention of deleting my iPhoto library (once complete) then setting up the Photo App with no photos in my library. I'm hoping it will allow me to set it up at that point like it did with my admin account, then import all my old pics. I still have about 2 hours to go until my photos have copied over to my external HDD. I'm hoping someone will come along with a better solution. I really don't want to spend several hours/day re-organizing my photos.

Unexpected error occurred - Try Again

Hi,
I upgraded my Time Capsule from a 500GB disk to 2TB Seagate Barracuda
After resassembly and re-start the following occures
I attempted to Erase the new disk, unexpected error occurred - Try Again
I completed a hard factory reset
The Time time capsule is found by the Airport Utility, try to configure a new wireless network the same error occurs
Tried to update the firmware earlier before the factory reset, still the same problem.
Running out of ideas
Thanks

Hi,
Didn't think it was going to be that simple ....
I just upgraded to the latest 27" iMac, I had a USB drive attached for backups which was getting very noisy and annoying.
The master plan was to upgrade the 500GB TC, with a 2 TB Drive (fail by the look of it now) and use the upgraded 2TB TC for iMac and the MacBook Air backups and remove the Noisy USB.
I have now purchased a new 2TB TC, because the wife wasn't getting any WIFI at the front of the house (she was getting irate) ... as wives do LOL.
So now I need to revert the TC back with the old drive, to restore to working order.
I will then sell the Old TC and get something for it ... :-(
Use the 2 TB drive for a customer upgrade which has happended to come along now.
Thanks for your HELP

Unable to install software update August 2014, "Unexpected error occurred."

PLEASE HELP!
What I am trying to do: Install the latest update on my computer. 1) Because it's an update. 2) Because I need, and currently cannot, access the iCloud feature in my system preferences.
What I have recently done to my computer:
I am currently uploading all my data into the Cloud.
I purchased iTunes Match and Google Drive. Google Drive caused problems on my computer, so I deleted it. It was causing it to crash. It hasn't crashed since, but now runs more slowly.
iTunes Match is taking forever, but seems to be working.;:
Something else I've noticed with iTunes, every time I open the application now, it puts these files onto my desktop screen: iTunes Media folder, iTunes Library.itl, iTunes Library.xml, Album Artwork folder, iTunes Library Extras.itdb and iTunes Library Genius.itdb.
Like I said, PLEASE HELP!!!!
The following is the Console Messages I found within my Console under private/var/log > install.log:
Aug 14 04:49:05 -MacBook-Pro installd[2466]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root
Aug 14 04:49:15 -MacBook-Pro installd[2466]: update_dyld_shared_cache: warning can't use root /Applications/iChat.app/Contents/MacOS/iChat: can't open file, errno=2
Aug 14 04:49:15 -MacBook-Pro installd[2466]: update_dyld_shared_cache: warning can't use root /Applications/iCal.app/Contents/MacOS/iCal: can't open file, errno=2
Aug 14 04:49:18 -MacBook-Pro installd[2466]: PackageKit: Shoving /var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root (3 items) to /
Aug 14 04:49:52 -MacBook-Pro /System/Library/PrivateFrameworks/PackageKit.framework/Resources/shove[2556]: [source=file] failed _RelinkFile(/var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root/Applications/iTunes.app/Contents/Resources/iT unes.help/Contents/Resources/tr.lproj/itns34268017.html, /Applications/iTunes.app/Contents/Resources/iTunes.help/Contents/Resources/tr.l proj/itns34268017.html): Input/output error
Aug 14 04:49:53 -MacBook-Pro installd[2466]: PackageKit: Install Failed: (null)\nError Domain=PKInstallErrorDomain Code=120 UserInfo=0x1004c3930 "An unexpected error occurred while moving files to the final destination." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 "The operation couldn’t be completed. Input/output error") {\n NSLocalizedDescription = "An unexpected error occurred while moving files to the final destination.";\n NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=5 \"The operation couldn\U2019t be completed. Input/output error\"";\n arguments = (\n "-f",\n "-s",\n "/var/folders/zz/zzzivhrRnAmviuee+++++++++++/Cleanup At Startup/PKInstallSandbox-tmp/Root",\n "/"\n );\n}
Aug 14 04:49:54 -MacBook-Pro Software Update[2450]: Error: An unexpected error occurred while moving files to the final destination. (PKInstallErrorDomain code 120)
THANK YOU
<Edited by Host>

you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

Hi. I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

I iMac, Mac OS X 10.6.8 Lately it does not update the program. Writes the following: "Unable to install the update iTunes. An unexpected error occurred." What you need to do that right, that programs can be updated again?

you will have the most up to date itunes available for your os 10.6.8. to get a newer version you will have to upgrade to a newer os.

[INS-08109] Unexpected error occurred 'InstallOptionsUI'.

Hello.
I have installed Oracle Clusterware 10.2.0.3 and I tried to upgrade to Grid Infraestructure 11.2.0.2. The plataform is solaris 10 in a sparc.
When I run the installer I have a error and I cannot continue the install, I have a case open in metalink but I have no answer yet.
This is the message and I hope you can help with that.
+[INS-08109] Unexpected error occurred while validating inputs at state *'InstallOptionsUI'*.
Cause - No additional information available.
Action - Contact Oracle Support Services or refer to the software manual.
Summary - java.lang.NullPointerException+
Regards,
Milton

Getting the same error when I try to install 11GR2 grid software:
./runInstaller -silent -responseFile /opt/apps/oracle/software/grid/response/tm_grid_install.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 415 MB. Actual 16224 MB Passed
Checking swap space: must be greater than 150 MB. Actual 92520 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-08-04_01-51-00PM. Please wait .../opt/apps/oracle/software/grid>
[WARNING] [INS-08109] Unexpected error occurred while validating inputs at state 'InstallOptionsUI'.
CAUSE: No additional information available.
ACTION: Contact Oracle Support Services or refer to the software manual.
SUMMARY:
- java.lang.NullPointerException
I installed the database software successfully, but the grid install fails with this error.
Has Oracle come back to you yet?
OK I found my problem.
The install log file (found under INVENTORY_LOCATION/logs) pointed me to a missing parameter in my responseFile.
In my case that was
oracle.install.option=
which I changed to
oracle.install.option=CRS_SWONLY
Edited by: nokia4me on Aug 4, 2011 2:05 PM

An unexpected error occurred. Try Again.

I was having trouble with an AirPort Express, so I performed a factory reset. Now when I go into AirPort Utility to try to configure it, it spins for a while saying it's "Reading previous settings..." then it tells me "An unexpected error occurred. Try Again." I've tried this several times now with factor reset between each to no avail. Any suggestions? (Or is the AirPort Express simply shot?)

It should not be reading previous settings.. make sure you are doing the full factory reset and not a hard reset.
Also do the setup in full isolation to the network.. at least to begin with.. using ethernet connection.. turn off wireless in the computer. That gives you the best chance of success.
How old is the express? And did you upgrade it to latest firmware?? Thereupon you are having these issues.. downgrade the firmware again.

An unexpected error occurred (error code -43)

Today when I click to run Time Machine for the first time I get the message "an unexpected error occurred (error code -43)" Any suggestions??? I installed Leopard as an upgrade the day it was released and recall opening up Time Machine a time or two, but never had an external drive attached. Today I receive my new external HD and am stuck...

http://discussions.apple.com/thread.jspa?messageID=5884398
Just access Time Machine from the System Preferences!!!

Can't update ANY software always get this: "An unexpected error occurred"

Hi,
Can someone tell me why it is that whenever i try to upgrade any software on my MacBook pro I get the message: An unexpected error occurred (error code -10822). It just started happening yesterday, and it happens with everything i try to upgrade. Can someone help me solve this problem?
Thanks!!

If disk permissions repair is failing, then boot with your install disc, launch Disk Utility, and repair the disk, not permissions. Also, see http://support.apple.com/kb/HT2963 for more. Report back.

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

The operation can't be completed because an unexpected error occurred (error code -50)

I have a Seagate Central 3tb NAS (latest firmware) attached to my wireless router (Netgear wndr3400v3). I have a late 2011 macbook pro with Yosemite on it. When I go through finder to use my NAS I keep getting "The operation can’t be completed because an unexpected error occurred (error code -50)" . I only get it when I am trying to copy a big folder with other folders and files with in. I can copy a single file or create folders. If i try to copy a folder with 100 pics in it then I get the error. I can create the folder on the NAS and select all 100 files. When I drag them to the NAS, then they copy with no problems. Every so often my time machine has an error and says that it has to create a new backup. I read some where to make sure that "put hard disk to sleep when possible" should be selected in the energy saver in preferences. Still no luck. A can also drag any file from the NAS back to my laptop or view them from the NAS with no problems.
Thanks for any help in advance.
Billy

Hi there,
Well I have exactly the same problem! Recently I reset my WD My book White light (2 x 1TB RAID disk), due to the fact that the disk ran full because of TimeMachine.
I reset the disk, and now I can only write some files to it, but most give this error code.
I wrote to WD, but they could not give an answer.
Q: did you update the firmware? Maybe that is causing the problem, in that it is maybe not consistant in the filesystem?

Upgrade to 7.3.2 "...unexpected error occurred."

Similar Messages

Maybe you are looking for