Upgrade to ECC 6.0 from 4.6C

I have been researching on the forums and I am following all the information I've found yet I still have one question.
We are upgrading our landscape from 4.6C to ECC 6.0 I just took this job and in the past the company did not transport new roles as they were created. They were created in PRD. DEV and QAS are upgraded to ECC6 now. I went to SU25 in DEV to go through steps 2 and 3. None of our roles are there so there wasn't anything to do. What I did was a massdownload of all roles from PRD and upload to DEV so that I could transport the changes to QAS and let everyone start testing. After uploading all roles into DEV, I went back to SU25, I did step 2A, & 2B says I do not need to maintain the transactions. 2C has almost all roles with a green status light, yet if I click on each role there are unmaintained and new authorization objects in all of them. I can go in one at a time and maintain them. However, if I am reading this correctly, in step 3 the values I maintain will not be transported. Is this correct? Am I going about this the correct way?
Michael

That's a tricky one...
Some ideas:
Was SU25 step 1 ever performed in DEV?
What you need to do before 2A is sync the SU24 data backwards as well, as that has probably been maintained in PROD as well. Also check how reliable the PROD SU24 data is and how many "changed" or "manually" or "inactive" auths there are.
2B I suspect might have problems from the upload into an upgraded system, particularly if you generate profiles for a transaction which does not exist anymore. Check the menu (and standard S_TCODE auths) whether everything you uploaded is there. Also consider running 2D first in a system copy to test your PROD roles.... Additional recommendation: see [SAP Note 991377|https://service.sap.com/sap/support/notes/991377]
If you are lucky, then they made a science out of SU24 directly in PROD and you can re-use that.
Good luck,
Julius
Edited by: Julius Bussche on Aug 4, 2009 9:10 PM

Similar Messages

  • Upgrade to ECC 6.0 from 4.7. OSS Notes implementation

    Hi,
    We have upgraded the R/3 system from 4.7 to ECC 6.0. I am looking into the SPAU Note corrections and it has a huge list of Notes to be implemented. I think some of these would have been already included in the upgraded version but is there a way to cross verify this. As of now I am comparing the support packages going into each Notes. But this is a huge list.
    Do any one has a effective approach to share?
    Thanks in advance.
    With Regards,
    Roopesh

    If you use SPAU, it will take care of the notes "already in the support package" and "to be implemented". Just click on the icon in front of the note number, the system will download the newest version of the note and check, if it´s still valid.
    Markus

  • Upgrade to ECC 6.0 from 4.7 - When to execute SPDD/SPAU

    Hi Expert,
    I'm doing technical upgrade from 4.7 to ECC 6.0 and just discover notes that related to activating Add-ons (Business Switch) for DIMP. It seems like some of the switch need to be turn on manually. The question is, should this switch be turned on before SPDD/SPAU or I can run SPDD/SPAU then turn on the switch? I'm raising this question because I notice some of the collective search help that contain customized elementary search help become resetted and the customized search help is not included in the standard search help anymore. Thanks in advance for the answer.
    Rgrds,
    Abraham

    Hi Abraham,
    As said by Abdul you can do the SPDD during the phase ACT_700, The SAPup tool stops at this phase and prompts you for the confirmation.
    In this phase you have to login to the shadow instance and in the 000 client with DDIC user and create a user as the copy of the DDIC.
    use this newly created user for doing the SPDD in the shadow instance.
    SPAU can be done once the upgrade is completed with in 14 days with out a developer key after 14 days you need a developer key.
    when you carry out further upgrades you can include these 2 requests SPDD and SPAU during the upgrade itself. In this situation if you have any other delta adjustments then you have to do that delta in the shadow instace otherwise you dont need to work again on the SPDD and SPAU for the rest of the systems.
    Hope this info is useful.
    Thanks,
    Venkat.

  • Upgrade to ECC 6.0 from 4.7

    Hi
    Can some one explain me what are the new functionalities in ECC 6.0 compared to 4.7? (Payroll/HR)
    We are doing an upgrade project.
    Thanks

    Did you check these <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/44c490d36157c0e10000000a155369/content.htm">Release Notes</a> ?
    ~Suresh

  • ECS value not appearing in J1IIN after upgrade to ECC 6.0 from 4.72

    Hi Experts
    All the objects corresponding to ECS are restored to original i.e. ECC 6.0 during SPAU modifications. We are able to find the ECS value appearing in the new version for the existing billing docs whereas when we try to create a new billing doc in J1IIN, ECS value is calculated as '0.00'. We have checked with the sale order and billing doc where ECS is populated as expected.
    Kindly provide us with some inputs to resolve.
    Regds
    Priya G

    1) Maintain the view J_1IEXCDEF for switching on NCCD indicator for the ex reg.
    2) Activate ECS for the same reg in view J_1IREGSET.
    Regds
    kartik

  • What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0

    Hi ,
    I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0.  Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
    What is the approach need to be followed.
    What are things need to be tested.
    what kind of test scripts need to be created.
    Please provide your suggestions and ideas..
    Thanks
    vijay

    Hi,
    In Upgrade you need to do all integration testing and check all functionalities.
    Thanks
    Sunny

  • Changes in ECC 6.0 from 4.6

    Hi Experts,
    Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
    General ledger     FI     
    - post document with different document types     FI     "
    FB50"
    - display document     FI     FB03
    - reverse document     FI     FB08
    - print document     FI     F.62
    - display/change line items     FI     FBL3N
    - display balancies     FI     FS10N
    - clear account     FI     F-03
    reporting     FI     
    - P/L+B/S     FI     S_ARL_87012284
    - document journal     FI     S_ALR_87012287
    - general ledger     FI     S_ALR_87012282
    Closing     FI     
    - valuation AP and AR     FI     F.05
    - valuation G/L     FI     F.05
    - valuation bank accounts     FI     F.05
    Others     FI     
    - standard analysis     SD     MCSI
    - creating order     CO     KO01
    Master records          
    - creating account in chart of account     FI     FSP0
    - creating account in company code     FI     FSS0
    - edit financial statement     FI     OB58/FSE2
    - exchange rates     FI     S_BCE_68000174
    - open and close period     FI     S_ARL_87003642
    Accounts payable     FI     
    - create vendor     FI     FK01
    - document entry/fast entry     FI     FB10
    - post/delete invoice     FI     FBV0
    - vendor display/change line items     FI     FBL1N
    - payment run dom/foreign test also with bank     FI     F110
    - post manual outgoing payment     FI     F-53
    - post manual incoming payment     FI     F-52
    Reporting     FI     
    Accounts receivables          
    - change customer master data     FI     XD02
    - post invoice     FI     FB70
    - customer display/change line items     FI     FBL5N
    - post manual incoming payment     FI     F-28
    - dunning run     FI     F150
    Reporting     FI     
    - open items     FI     F.27
    - account statement     FI     F.27
    - customer line items     FI     

    Dear Jaffer,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • R3 4.7 upgrade to ECC 60 EHP5 spam error Program terminated jobRDDMNTAB

    We're run upgrade procedure for development source system R/3 4.7 set 2.00 to ECC 6.0 EHP 5
    on HP-UX 11.31, Oracle 9.2.0.8:
    Latest version of SAPEXEDB-378 and SAPEXE-378 levels patch are installed.
    -R3trans version 6.13 (release 640 - 19.01.11)
    -tp version 340.16.67 (release 640)
    -disp+work information
    kernel release                640
    kernel make variant           640_REL
    compiled on                   HP-UX B.11.23 U ia64 for "hpia64"
    compiled for                  64 BIT
    compilation mode              Non-Unicode
    compile time                  Oct 23 2011 20:47:12
    update level                  0
    patch number                  389
    source id                     0.389
    - BRCONNECT 6.40 (52)
    - spam version 6.20/0038
    -SAPKB62068, SAPKA62068, SAPKH47021, SAPKE47018, SAPKIPYH52,
    SAPKITLRB4,SAPK-10008INHRCEE, ST-A/PI 01N_620_R3 0000,SAPKGPIB04,
    SAPKIPZH52 of support packages installed.
    Result of manual running tp commands with options:
    tp showbuffer SID pf=/usr/sap/SID/trans/bin/TP_DOMAIN_SID.PFL
    This is tp version 340.16.67 (release 640)
    Warning: Parameter DBLIBPATH is no longer used.
    Warning: Parameter DBSWPATH is no longer used.
    SID buffer:
    SAPKD62044  |will not be imported because it is tagged.
      that makes 0 transports to be imported.
    tp finished with return code: 0
    meaning:  Everything OK
    When we're try install latest spam version 6.20/044, next 2 error's
    occured at IMPORT_PROPER step:
    Import steps not specific to transport request:
    -Activate inactive runtime objects->Program terminated (job: RDDMNTAB,
    no.: 20543600), Ended with return code:  ===> 12 <===
    in SM21:
    14:50:48 BTC 15 000 DDIC Q0 E Signal 11 received by operating system
    14:50:58 BTC 15 Q0 1 Start Workproc15, 7 times since system startup. PID 1104
    14:50:58 BTC 15 000 DDIC F3 T Invalid object name for TemSe object: " "
    14:50:58 BTC 15 000 DDIC EC F Failed to create log for job RDDIMPDP
    14:50:58 BTC 15 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
    (magic==X'NULL-ptr')
    14:52:53 BTC 16 000 DDIC Q0 E Signal 11 received by operating system
    14:52:58 BTC 16 Q0 1 Start Workproc16, 7 times since system startup. PID 1179
    14:52:58 BTC 16 000 DDIC F3 T Invalid object name for TemSe object: " "
    14:52:58 BTC 16 000 DDIC EC F Failed to create log for job RDDMASGL
    14:52:58 BTC 16 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
    (magic==X'NULL-ptr')
    14:53:53 DIA 02 000 DDIC Q0 E Signal 11 received by operating system
    14:53:54 DIA 02 Q0 1 Start Workproc 2, 3 times since system startup. PID 1233
    14:53:54 DIA 03 000 DDIC Q0 E Signal 11 received by operating system
    14:53:54 DIA 03 Q0 1 Start Workproc 3, 3 times since system startup. PID 1236
    14:53:55 DIA 04 000 DDIC Q0 E Signal 11 received by operating system
    14:53:55 DIA 04 Q0 1 Start Workproc 4, 3 times since system startup. PID 1239
    14:54:07 RD S2 3 Connection to CPI-C client 050 was closed
    14:54:07 RD S7 4 > Partner LU name:
    14:54:07 RD S0 R > Host: yyyhost
    14:54:07 RD S0 I > Partner TP Name: tp
    14:54:07 DIA 01 000 DDIC SPAM R4 9 Communication error, CPIC return code 020, SAP return code 223
    14:54:07 DIA 01 000 DDIC SPAM R5 A > Conversation ID: 76517657
    14:54:07 DIA 01 000 DDIC SPAM R6 4 > CPI-C function: CMSEND(SAP)
    14:54:07 DIA 01 000 DDIC SPAM TP 0 Tp call failed (RFC RC = 4: RFC message = ...)
    В se37:
    RDDIMPDP DDIC Complete 22.11.2011 14:54:04 -!!
    RDDIMPDP DDIC Canceled 22.11.2011 14:50:48 -?
    RDDMASGL DDIC Complete 22.11.2011 14:53:53  -!!
    RDDMASGL DDIC Canceled 22.11.2011 14:52:53  -?
    When we 'e try istall another component path (EA-APPL200 for example ), inspam 0038 we 'e see:
    Error in phase: IMPORT_PROPER
    Reason for error: TP_STEP_FAILURE
    Return code: 0012
    1 ETP108 tp path : "tp"
    1 ETP109 version and release : "340.16.67" "640"
    1 ETP198
    4 EDA506 -> "/SDF/SWCM_PAT03D" Activation - - -
    4 EDA492 Warnings: "0"
    4 EDA483 Errors: "0"
    4 EDA495 Total runtime: " "
    1 ETP173 DISTRIBUTION OF DD-OBJECTS
    1 ETP110 end date and time : "20111122145403"
    1 ETP111 exit code : "0"
    4 EDA492 Warnings: "0"
    4 EDA483 Errors: "0"
    4 EDA495 Total runtime: " "
    1AETR012XProgram terminated (job: "RDDDIS0L", no.: "15141800")
    4 EDA492 Warnings: "0"
    4 EDA483 Errors: "0"
    4 EDA495 Total runtime: " "
    1 ETP173 DISTRIBUTION OF DD-OBJECTS
    1 ETP110 end date and time : "20111122151518"
    1 ETP111 exit code : "12"
    SM21 the job RDDDIS0L canceled:
    15:14:18 BTC 16 000 DDIC Q0 E Signal 11 received by operating system
    15:14:19 BTC 16 Q0 1 Start Workproc16, 9 times since system startup. PID 1946
    15:14:19 BTC 16 000 DDIC F3 T Invalid object name for TemSe object: " "
    15:14:19 BTC 16 000 DDIC EC F Failed to create log for job RDDDIS0L
    15:14:19 BTC 16 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
    (magic==X'NULL-ptr')
    In 000-client under ddic i'm report RDDMNTAB scheduled( RDDNEWPP),class A(High).
    for messages : "Failed to create log for job XXXX" for /usr/sap/YYY/SYS/global/000JOBLG directory( owner: yyyadm:sapsys) next command exeuted: chmod 777 /usr/sap/YYY/SYS/global/000JOBLG
    Very difficult situation with this SPAM step's!...
    How solve this problem?
    PS. sorry for conjoint  text, forums' bugs...
    Edited by: Baurzhan Lekerov on Nov 22, 2011 4:05 PM

    We're getting queue of required packages,new tp and R3trans versions, ABAP nad JAVA corrections for 702,stack.xml and stack_for_slm.xml from MOPZ and put this files under <sid>adm into download directory:
    /backup_SID/INSTALL/EHP5_UPGRADE  on server:
    ll /backup_SID/INSTALL/EHP5_UPGRADE:
    in this directory 6 directories with unzipped DVD:
    drwxr-x--- BS7i2010_Java_Comp
    drwxr-x--- exp_lang
    drwxr-x---  exp_pack_all_components
    drwxr-x--- export_ehp5  -> 2 Export DVD
    drwxr-x--- ecc60_ehp5_components
    drwxr-x--- upgr_master -> Upgrade Master
    and other files from MOPZ queue:
    -rw-rr  SAPEXE_90-20006757.SAR
    -rw-rr  NW70BICNT70504_0-10007518.ZIP
    -rw-rr XI7_1_SEM-BW_605-sp5.dlt
    -rw-rr sidadm     sapsys     2499937 Jun  9 12:14 XI7_1_SEM-BW_605-sp5.tpt
    ...... and more
    We're started upgrade procedure with STARTUP script and on PREP_EXTRACT/KEY_CHK phase next error occured:
    "ERROR: Scanning of download directory failed with the following error: No fix archive found in download directory"
    in KEYCHK.LOG:
    1 ETQ399 Scanning directory '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages'.
    1 ETQ399 Found 697 files.
    2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435' could not be recognized!
    2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435.ZIP' could not be recognized!
    2 ETQ399 Found #1 'EPS/in' in '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/EA-DFPS603.SAR'.
    2 ETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/EA-DFPS603.SAR' determined as 'type=ABAPPACK'.
    we're unzipped *.ZIP packages into download directory manually, but next error with *.tpt extensions occured again:
    2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/XI7_1_FINBASIS_605-sp5.tpt' could not be recognized!
    2 ETQ399 Setting action for '/backup_SID/INSTALL/EHP5_UPGRADE/K-604DHINISPSCA.SAR' to 'UNPACK_TRANS'.
    2 ETQ399 Setting action for '/backup_SID/INSTALL/EHP5_UPGRADE/KW70205.SAR' to 'UNPACK_TRANS'
    /upg/abap/log/CHECKS.LOG is empty.
    cat PHASES.LOG :
    1 ETQ201 Entering upgrade-phase "BEGIN_PRE" ("20111126195508")
    4 ETQ399 Set environment for standard connect:
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = ''
    4 ETQ399 Environment variables:
    4 ETQ399   auth_shadow_upgrade=0
    1 ETQ200 Executing actual phase 'PREP_EXTRACT/BEGIN_PRE'.
    4 ETQ010 Date & Time: 20111126195508
    cat SAPupchk.log :
    This is SAPup release lmt_001 version 40.024 compile time 03:26:32 Nov 23 2011.
    This is UNICODE SAPup!
    ..finished at 20111126195508 with status SUCCEEDED.
    CURRENTPHASE PREP_EXTRACT/KEY_CHK
    ...started at 20111126195508
    Using phase log file 'KEYCHK.LOG'.
    ...begin dialogue at 20111126195508
    ...end dialogue at 20111126204132
    ...begin dialogue at 20111126204449
    ...end dialogue at 20111126205544
    ...begin dialogue at 20111126205902
    ...end dialogue at 20111126212808
    ...begin dialogue at 20111126213133
    ...end dialogue at 20111126215359
    ...begin dialogue at 20111126215736
    cat SCANCAR.LOG:
    drwxr-xr-x        4096    20 Oct 2011 23:40 igs/dump
    drwxr-xr-x        4096    20 Oct 2011 23:40 igs/log
    -rwxr-xr-x           4    20 Oct 2011 23:44 igs/igshelper.lst
    cat SCANCAR.SAV:
    ENV: SAPSYSTEMNAME=KDV
    ENV: auth_shadow_upgrade=0
    ENV: dbms_type=ORA
    ENV: dbs_ora_schema=SAPKDV
    ENV: dbs_ora_tnsname=KDV
    EXECUTING /oracle/KDV/usrsap/upg/abap/tools/SAPCAR (/oracle/KDV/usrsap/upg/abap/tools/SAPCAR) -tvf /backup_KDV/INSTALL/EHP5_UPGRADE/igsexe_3-20007786.sar
    SAPCAR: processing archive /backup_KDV/INSTALL/EHP5_UPGRADE/igsexe_3-20007786.sar (version 2.01)
    -rwxr-xr-x    31880896    30 Sep 2011 00:22 bwgis.so
    -rwxr-xr-x    31720200    30 Sep 2011 00:22 bwgis_c.so
    -rwxr-xr-x    36529288    30 Sep 2011 00:24 gfwchart.so
    -rwxr-xr-x    36434128    30 Sep 2011 00:25 gfwchart_c.so
    -rwxr-xr-x         189    30 Sep 2011 00:32 igsexe.lst
    -rwxr-xr-x         438    30 Sep 2011 00:32 igsmanifest.mf
    -rwxr-xr-x    34465896    30 Sep 2011 00:31 igsmux_mt
    -rwxr-xr-x    15608480    30 Sep 2011 00:31 igspw_mt
    -rwxr-xr-x    13518008    30 Sep 2011 00:32 igswd_mt
    -rwxr-xr-x    12428336    30 Sep 2011 00:25 imgconv.so
    -rwxr-xr-x    19683776    28 Sep 2011 02:20 libsapnwrfc.so
    -rwxr-xr-x    10839352    30 Sep 2011 00:25 rspoconnector.so
    -rwxr-xr-x    25510112    30 Sep 2011 00:19 sgxgis.so
    -rwxr-xr-x    35754952    30 Sep 2011 00:23 xmlchart.so
    -rwxr-xr-x    35659800    30 Sep 2011 00:23 xmlchart_c.so
    -rwxr-xr-x     6072600    30 Sep 2011 00:25 zipper.so
    Are ./STARTUP script can not find 6 DVD-directories in download directory?
    or some problems with *>ZIP packages files? we're unzipped *.ZIP and getting *.tpz, *.tpt files in download directory.
    What is *.tpz and *tpt-extensions files?
    Cai I to ignore this messages in KEYCHK.LOG:
    "2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435.ZIP' could not be recognized!
    2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/XI7_1_FINBASIS_605-sp5.tpt' could not be recognized!
    At CURRENT PHASE  PREP_EXTRACT/KEY_CHK next error message occured:
    "Please enter mount points for the DVDs required for the upgrade.
    Enter at least the mount point containing "Kernel DVD for OS HPUX_IA64 and Non-Unicode"
    In donwload directory we're don/t have a Kernel DVD for EHP 5 HPUX_IA64 and Non-Unicode.
    What is the DVD Kernel (7.01,702, 7.20 releases) we're need to download now?
    Edited by: Baurzhan Lekerov on Nov 27, 2011 9:35 AM

  • Need to find impact of Vertex O series upgrade on ECC and changes required?

    Hello experts,
    My client is upgrading Vertex series to O from Q.
    As part of Q series, additional fields such street will be used to identify correct tax jurisdiction code in system. 
    Also, zip code used will be 9 digits (zip+4) instead of 5 digits.
    We need to correct existing master data and open transactions in system with new jurisdiction code along with supporting new data in system.
    Below are the questions:
    1. What changes are required in ECC side to support new vertex series in interface etc?
    2. How can we achieve integration of vertex O series with new master and transnational data getting created in system to have right TXJCD value?
    3. What all possible solutions are available to correct master data and transnational data in system with correct TXJCD value?
    Any pointers to experience with Vertex will be rewarded.
    Thank you,
    Gouri. 

    Hi,
    > 1. is there any dependency for the remaining systems in the landscape (SRM 5.0 SPS15, NW 7.0 SPS18, PI 7.1 SPS8, >SOLMAN EHP01 SPS22)?
    As such there is no dependency between component you specified but SAP always says to be on latest patches. As far as solution manager is concerned you should have minimum support pack level Solman 7.0 SP17 but anyway you are more than that.
    > 2. we are using AIX Version 5.3 and "DB2 v9.5.0.2", does it support ECC 6.0 EHP04 or do I need to upgrade?..
    It is fine with your upgrade.
    > 3. Java version for NW 7.0 is as follows:
    > java version "1.4.2"
    > Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    > Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20080122 (SR10) (JIT enabled: jitc))
    > Does it support my requirement or any upgrade is required?
    >
    Java version is also fine.
    Thanks
    Sunny

  • Customer Fields not getting poplulated in PO in R/3 (ECC 6.0) from SRM 5.0

    Hi,
        We Recently upgraded our R/3 System from 4.6 C to ECC 6.0.
    Shopping card number is getting created in SRM side and after approval it is getting sent to R/3 Back end,We have some customer fields that need to be populated in the back end from the shopping card,Which is not happening as of now.We are using the BAPI_PO_CREATE1 for creating the PO in R/3.We tried running the BAPI_PO_CREATE1 Standalone by giving the customer fields Table EXTENSIONIN and in Structure BAPI_TE_PO_ITEMS,But the custom fields are not populating in the PO.
    Pls suggest,
    Thanks
    Rakesh.

    Hi Rakesh ,
    1.wat is ur target table  that  ur  custom fields were  added using apped structure.
    2. Have u passed the Communcation strucure also means
    in ur case BAPI_TE_MEPOITEMX along with BAPI_TE_MEPOITEM .
    Plz find  similar code which is for  sale order coding which may  help u .
    ***Constant Declarations
    Constant: C_BAPE_VBAP (9) type u2018BAPE_VBAPu2019,
              C_BAPE_VBAPX (10) type u2018BAPE_VBAPXu2019
    TYPES:    BEGIN OF T_BAPE_VBAP,
               VBELN TYPE VBELN_VA,
               POSNR TYPE POSNR_VA,
               ZZcontract_num type ZZcontract_num "Custom field
              END OF T_BAPE_VBAP.
    ***Communication Fields
    TYPES: BEGIN OF T_BAPE_VBAPX,
            VBELN TYPE VBELN_VA,
            POSNR TYPE POSNR_VA,
            ZZcontract_numX type CHAR1,
           END OF T_BAPE_VBAPX.
    Declaring the Internal table and Work areas
    DATA: I_EXTENSIONIN TYPE STANDARD TABLE OF BAPIPAREX.  u201CInternal table                             for BAPI Extension Table
          w_EXTENSIONIN like line of I_EXTENSIONIN,             u201CWork area for BapiExtension Table
         I_return type standard table of bapiret2,
       W_return like line of i_return,
          is_BAPE_VBAP    type    T_BAPE_VBAP,              u201CStructure declaration
          is_BAPE_VBAPX type T_BAPE_VBAPX,            u201CStructure declaration
          v_vbeln  type   BAPE_VBAP-VBELN,            u201CVariable for the doc no     
          v_posnr type BAPE_VBAP-POSNR,                  u201CVariable for the itemnumber
      v_zzcontract_num type BAPE_VBAP-ZZcontract_num, u201CVariable for the Contract number
    Filling the BAPI table Extension Structure.
               W_BAPE_VBAP-VBELN =u201D00001234u2019.
               W_BAPE_VBAP-POSNR =u2019000010u2019 .
               W_BAPE_VBAP-ZZcontract = 'ABC123'.
    W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAP.
    w_EXTENSIONIN+30 =W_BAPE_VBAP.
    APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
    CLEAR w_EXTENSIONIN..
               k_BAPE_VBAP-VBELN =u201D00001234u2019.
               W_BAPE_VBAP-POSNR =u2019000010u2019 .
    W_BAPE_VBAP-ZZcontractx = 'X'.
    *********same to pass Communication Structure.
    W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAPX.
    w_EXTENSIONIN+30 = W_BAPE_VBAPX.
    APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
    CLEAR w_EXTENSIONIN.
      6) Then Call BAPI u2018BAPI_SALESORDER_CHANGE u2018to Update Sale Order with Contract number
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
        EXPORTING
          SALESDOCUMENT    = V_SALORD_NUMBER
          ORDER_HEADER_IN  = K_ORDER_HEADER_IN
          ORDER_HEADER_INX = K_ORDER_HEADER_INX
        TABLES
          RETURN           = I_RETURN
          ORDER_ITEM_IN    = I_ORDER_ITEM_IN
          ORDER_ITEM_INX   = I_ORDER_ITEM_INX
          EXTENSIONIN      = I_EXTENSIONIN.
    ****COMMIT WORK AND WAIT.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          WAIT = 'X'.
    Hope it may help you
    Rgds
    Sree

  • Upgrade to ECC 6.04 PHASE: MAIN_NEWBAS/PARCONV_UPG ERROR

    Hi
    get error in Upgrade to ECC 6.04 in downtime phase - MAIN_NEWBAS/PARCONV_UPG.
    The screen says:
    Checks after phase MAIN_NEWBAS/PARCONV_UPG were negative!
    Last error code set: Conversion entries have been found in, see phase log for more detaile
    In the SAPup.log says that:
    CURRENTPHASE MAIN_NEWBAS/PARCONV_UPG
    ...started at 20110324123904
    Using phase log file 'PARCONV.LOG'.
    ..finished at 20110324124157 with status ERROR CHECKING MODEFLAGS.
    Error message set: 'Conversion entries have been found in, see phase log for more detaile'
    ...begin dialogue at 20110324124157
    And in the PARACONV.ELG file says:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990324.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "0"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV00.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV01.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV02.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    CONVERSION ERRORS and RETURN CODE in NCONV03.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    MVNTABS ERRORS: delntabs and RETURN CODE in PL000324.DEV
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP111 exit code           : "0"
    I look this log files ( RSMFCONV.DEV RSMFCONV.DEV PD990324.DEV NCONV00.DEV NCONV01.DEV NCONV02.DEV NCONV03.DEV PL000324.DEV ) but all of this, is exit code '0'
    I don't know where is the error.
    Any idea for helpme,
    thanks in advise.
    Sergio.
    Edited by: Sergio Mazzeo on Mar 24, 2011 1:24 PM
    The last lines of the  PARACONV.LOG says that:
    4 ETQ260 Starting batchjob "NTBUF_SYNC"
    4 ETQ230 Starting RFC Login to: System = "DEV", GwHost = "LKMDEV", GwService = "sapgw00"
    4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="LKMDEV", GwService="sapgw00"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
    4 ETQ233 Calling function module "subst_start_batchjob" by RFC
    4 ETQ399 JOBNAME='NTBUF_SYNC', REPNAME='RSNTSYNC', VARNAME='', BATCHHOST='LKMDEV', IV_SCHEDEVER=' '
    4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
    4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
    4 ETQ010 Date & Time: 20110324124156 
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    3 ETQ399 log analyse: search for '.[WT ]' in '^N......\.DEV$'
    1 ETQ399 Conversion entries found:
    2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER                 0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT                   0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND                  0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS                    0CNVIE20110322DDIC
    2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME                    0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER                 0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T                   0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC                  0CNVIE20110323DDIC
    2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL                  0CNVIE20110323DDIC
    4 ETQ001 START time "No modeflag to check for"
    1 ETQ206 Executing pre-phase DB specific actions.4 ETQ010 Date & Time: 20110324124157

    The last lines of the  file PARACONV.LOG says that:
    4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
    4 ETQ239 Logging off from SAP system
    3 ETQ399 log analyse: search for '^.[^WT ]' in '^N.......DEV$'
    1 ETQ399 Conversion entries found:
    2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER                 0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT                   0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND                  0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS                    0CNVIE20110322DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME                    0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER                 0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T                   0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC                  0CNVIE20110323DDIC       
    2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL                  0CNVIE20110323DDIC       
    4 ETQ001 START time "No modeflag to check for"
    1 ETQ206 Executing pre-phase DB specific actions.
    4 ETQ010 Date & Time: 20110324124157
    Can any helpme to this error. I don´t know what and where is the error. Not found this item in SAP Notes.
    Thansk a lot.
    Sergio.

  • PO:Error in Process while transferring to backend (ECC 6.0) from SRM 5.0

    Hi folks,
    We are on an Extended Classic Scenario. We have a major problem occurring in Production system only for the the limit orders. Limit Orders are not getting transferred to ECC 6.0 from SRM (Error in Process clearly shows the non existence for PO created first time)
    I also know that Error in Process/ Transfer Failed status comes up for several causes.
    This was working fine for months together, suddenly this problem is coming up. 1 Week back we had a Patch Upgrade too. I have checked the Vendor data, Account Assignment and other Basic data too and everything looks fine. We have tried debugging the FM's on SRM side which transfers the PO(ex:BBP_PD_PO_TRANSFER_EXEC_V2)
    After debugging too we are not able to rectify from where the error is coming up..
    I need your valuable inputs on this.
    Thanks a lot in advance.

    Thanks a lot on your Key inputs Peter.
    I just forgot to mention one more thing, i.e., in RZ20 (SRM) we could see the following errors for limit orders:
    (01) PurchOrder 003....012: Transfer failed
    (02) PurchOrder 003....012: Please maintain services or limits
    (03) PurchOrder 003....012: Purchase order still contains faulty items
    (04) PO 003....012: No instance of object type PurchaseOrder has been created. External reference
    To trace the issue backwards we tried creating a limit order PO directly from ECC backend (ME21N Transaction)
    One thing we could observe is in Limit tab if we not specify Expected Value and Overall Limit we are encountering the same error as shown up in RZ20.
    This gave us a vague idea that the price is not getting transferred for Limit Orders from SRM 5.0 to ECC 6.0 backend. Any key inputs on specific FM etc.,to debug and see what value is getting transferred from SRM to ECC would come handy.
    I hope Peter and others will help me on this.

  • Upgrade to ECC 6 and workflow issues

    Hello,
    We have just upgraded to ECC 6 and have some issues with workflows. Each dialog step in the workflows appear in the respective agents inbox, but once they action, the workflow do no proceed further. The log shows that the step did receive the terminating events, but doesnt proceed from there.
    Anyone who had similiar issues, can you please let me know how you went about overcoming this ?
    Cheers,
    Satish

    Hi Satish,
    Please check the agent assignment for the dialog step task. Also try by setting the task as a general task (if no particulat agents are desired).
    Do let me know in case of further queries.
    Regards,
    Saumya

  • Gereral differences between 4.7 and ECC 6.0 from FI/CO view

    Hi Guys
    Can any one tell me key differences between 4.7 and ECC 6.0 from FI/CO view.
    In interview what i must tell?
    Thank you.

    Please visit the following links:
    [http://service.sap.com/erp]
    [http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)]
    [http://service.sap.com/instguides] --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    [http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf]
    For Functionality Differences pls refer to the below site -
    [http://solutionbrowser.erp.sap.fmpmedia.com/]
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Regards,
    Ajit

  • Short dump in BP after upgrade to ECC 6.0

    Hi,
    We have upgraded system to ECC 6.0 from ECC 5.0
    After upgrade system is giving short dump in transaction BP, event tried to navigate on BP screen.
    Short dump description:
    A RAISE statement in the program "CL_OS_TRANSACTION=============CP" raised the exception condition  "OS_COMMIT_TOP_FAILED".                                             
    Since the exception was not intercepted by a superior program, processing was terminated.
    Please advise to resolve this issue.
    Regards,
    Dipak

    When exactly does this error appear? On save? clicking on a specific entry?
    I suggest opening an OSS call for this problem, this doesn't seem to known (at least I didn't find any notes)
    Markus

Maybe you are looking for