Upgrade to ECC 6.0 from 4.7 - When to execute SPDD/SPAU
Hi Expert,
I'm doing technical upgrade from 4.7 to ECC 6.0 and just discover notes that related to activating Add-ons (Business Switch) for DIMP. It seems like some of the switch need to be turn on manually. The question is, should this switch be turned on before SPDD/SPAU or I can run SPDD/SPAU then turn on the switch? I'm raising this question because I notice some of the collective search help that contain customized elementary search help become resetted and the customized search help is not included in the standard search help anymore. Thanks in advance for the answer.
Rgrds,
Abraham
Hi Abraham,
As said by Abdul you can do the SPDD during the phase ACT_700, The SAPup tool stops at this phase and prompts you for the confirmation.
In this phase you have to login to the shadow instance and in the 000 client with DDIC user and create a user as the copy of the DDIC.
use this newly created user for doing the SPDD in the shadow instance.
SPAU can be done once the upgrade is completed with in 14 days with out a developer key after 14 days you need a developer key.
when you carry out further upgrades you can include these 2 requests SPDD and SPAU during the upgrade itself. In this situation if you have any other delta adjustments then you have to do that delta in the shadow instace otherwise you dont need to work again on the SPDD and SPAU for the rest of the systems.
Hope this info is useful.
Thanks,
Venkat.
Similar Messages
-
Upgrade to ECC 6.0 from 4.7. OSS Notes implementation
Hi,
We have upgraded the R/3 system from 4.7 to ECC 6.0. I am looking into the SPAU Note corrections and it has a huge list of Notes to be implemented. I think some of these would have been already included in the upgraded version but is there a way to cross verify this. As of now I am comparing the support packages going into each Notes. But this is a huge list.
Do any one has a effective approach to share?
Thanks in advance.
With Regards,
RoopeshIf you use SPAU, it will take care of the notes "already in the support package" and "to be implemented". Just click on the icon in front of the note number, the system will download the newest version of the note and check, if it´s still valid.
Markus -
Upgrade to ECC 6.0 from 4.6C
I have been researching on the forums and I am following all the information I've found yet I still have one question.
We are upgrading our landscape from 4.6C to ECC 6.0 I just took this job and in the past the company did not transport new roles as they were created. They were created in PRD. DEV and QAS are upgraded to ECC6 now. I went to SU25 in DEV to go through steps 2 and 3. None of our roles are there so there wasn't anything to do. What I did was a massdownload of all roles from PRD and upload to DEV so that I could transport the changes to QAS and let everyone start testing. After uploading all roles into DEV, I went back to SU25, I did step 2A, & 2B says I do not need to maintain the transactions. 2C has almost all roles with a green status light, yet if I click on each role there are unmaintained and new authorization objects in all of them. I can go in one at a time and maintain them. However, if I am reading this correctly, in step 3 the values I maintain will not be transported. Is this correct? Am I going about this the correct way?
MichaelThat's a tricky one...
Some ideas:
Was SU25 step 1 ever performed in DEV?
What you need to do before 2A is sync the SU24 data backwards as well, as that has probably been maintained in PROD as well. Also check how reliable the PROD SU24 data is and how many "changed" or "manually" or "inactive" auths there are.
2B I suspect might have problems from the upload into an upgraded system, particularly if you generate profiles for a transaction which does not exist anymore. Check the menu (and standard S_TCODE auths) whether everything you uploaded is there. Also consider running 2D first in a system copy to test your PROD roles.... Additional recommendation: see [SAP Note 991377|https://service.sap.com/sap/support/notes/991377]
If you are lucky, then they made a science out of SU24 directly in PROD and you can re-use that.
Good luck,
Julius
Edited by: Julius Bussche on Aug 4, 2009 9:10 PM -
Upgrade to ECC 6.0 from 4.7
Hi
Can some one explain me what are the new functionalities in ECC 6.0 compared to 4.7? (Payroll/HR)
We are doing an upgrade project.
ThanksDid you check these <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/44c490d36157c0e10000000a155369/content.htm">Release Notes</a> ?
~Suresh -
ECS value not appearing in J1IIN after upgrade to ECC 6.0 from 4.72
Hi Experts
All the objects corresponding to ECS are restored to original i.e. ECC 6.0 during SPAU modifications. We are able to find the ECS value appearing in the new version for the existing billing docs whereas when we try to create a new billing doc in J1IIN, ECS value is calculated as '0.00'. We have checked with the sale order and billing doc where ECS is populated as expected.
Kindly provide us with some inputs to resolve.
Regds
Priya G1) Maintain the view J_1IEXCDEF for switching on NCCD indicator for the ex reg.
2) Activate ECS for the same reg in view J_1IREGSET.
Regds
kartik -
SSIS ETL does not pick the file from Share point when it execute through SQL Agent job
I have created one SSIS packages, which pick the file from the Share point document library. its work successfully, once it execute through the VS project application.
But when i create a job in SQL Server Agent for this package then it does not pick the file and job getting fail.
Just for more update, SQL Server has been install in Cluster mode and using BIDS 2012 with SQl Server 2012.Hi PriyankGupta,
SQL Server Integration Services is not cluster awareness, and does not support failover from one cluster node to another. So, in your clustered environment, make sure SSIS is installed on each node in the cluster. In other word, SSIS must be installed on
the server where the SQL Server Agent job is created.
If you use any third party task/component or drivers, make sure they are installed on the SQL Server Agent job server. Besides, also pay attention to the protection level of the package as well as 32-bit or 64-bit runtime mode of the package. For more information,
please see:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job
If the issue persists, please post the error message in the job history for further analysis.
Regards,
Mike Yin
TechNet Community Support -
I have set the Mathscript preferences 'Path' and 'Working Directory' parameters to the folder containing my scripts, and it works when
I run the VI, but I get a -90031 error when I run the executable.
What am I doing wrong?Hi Umars,
I had the same problem. In my case it turned out that it was caused the surrounding code. Plus the error
message was missleading. I got the error message -90031 (unknown symbol CalcWelchCorr2) for the
following piece of code:
ecorr= 1;
if setup & src== 1
for lag= 1:50
rho= CalcWelchCorr2( lag, win );
if rho > 0.001, ecorr= [ecorr; rho]; else, break; end
end
CalcWelchCorr2 is a user defined function located in the MS search path. The problem was caused by the
"break" in line 5. Actually this line was marked by some little warning symbol. Eventualle I modified the code
to get rid of the break
ecorr= 1;
if setup & src== 1
lag= 1; rho= CalcWelchCorr2( lag, win );
while rho > 0.001 && lag <= 50
ecorr= [ecorr; rho];
lag= lag+ 1; rho= CalcWelchCorr2( lag, win );
end
end
and voila, the executable worked fine.
However, I had to check all my VIs ( > 200 !) for similar errors which gave me headaches.
Why does the application builder doesn't produce some appropriate error message ?
E.g. "Line xxx in MathScript node in VI xxx cannot be executed"? Currently you get the
impression that the application was build successfully but eventually you get strange errors
or even erroneous results. Keep in mind that tracking down bugs in the final application is
much more difficult that in LV. Also the error message produced by the executable was not
helpfull at all. -
What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0
Hi ,
I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0. Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
What is the approach need to be followed.
What are things need to be tested.
what kind of test scripts need to be created.
Please provide your suggestions and ideas..
Thanks
vijayHi,
In Upgrade you need to do all integration testing and check all functionalities.
Thanks
Sunny -
Changes in ECC 6.0 from 4.6
Hi Experts,
Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
General ledger FI
- post document with different document types FI "
FB50"
- display document FI FB03
- reverse document FI FB08
- print document FI F.62
- display/change line items FI FBL3N
- display balancies FI FS10N
- clear account FI F-03
reporting FI
- P/L+B/S FI S_ARL_87012284
- document journal FI S_ALR_87012287
- general ledger FI S_ALR_87012282
Closing FI
- valuation AP and AR FI F.05
- valuation G/L FI F.05
- valuation bank accounts FI F.05
Others FI
- standard analysis SD MCSI
- creating order CO KO01
Master records
- creating account in chart of account FI FSP0
- creating account in company code FI FSS0
- edit financial statement FI OB58/FSE2
- exchange rates FI S_BCE_68000174
- open and close period FI S_ARL_87003642
Accounts payable FI
- create vendor FI FK01
- document entry/fast entry FI FB10
- post/delete invoice FI FBV0
- vendor display/change line items FI FBL1N
- payment run dom/foreign test also with bank FI F110
- post manual outgoing payment FI F-53
- post manual incoming payment FI F-52
Reporting FI
Accounts receivables
- change customer master data FI XD02
- post invoice FI FB70
- customer display/change line items FI FBL5N
- post manual incoming payment FI F-28
- dunning run FI F150
Reporting FI
- open items FI F.27
- account statement FI F.27
- customer line items FIDear Jaffer,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh -
R/3 4.7 Enterprise upgrade to ECC 6.0 EHP4
Just want to ask anyone here who has done the upgrade from r/3 4.7 to ecc 6.0 inclusive of ehp4 - is the upgrade runtime extended/longer compared with the upgrade just to ECC 6.0 SR3 ?
I've personally executed an EHP4 installation using SAPehpi and the end to end time execution is really long and. Some background - we are deciding if we would want to include EHP4 during the 4.7 upgrade or to apply EHP4 separately once the upgrade is done, the downtime is of concern here as we are limited to just the weekend.Hello Thom,
We did upgrade of R34.7 to ECC 6.0 SR3 EHP3 and we were able to complete this one day downtime. I am not sure about EHP4 but it should not take much longer. I beleive you should be able to accomplish this in weekend.
My suggestion is to do a system copy of PROD to a sandbox and perform test upgrade. By doing this you will know
1. what issues you will have during actual upgrade
2. Tunning that you can do to reduce downtime.
3. SPDD/SPAU adjustments can be evaluated.
By repeating couple of iteration on sandbox. You can estimate what would be your downtime and what you can do to reduce it.
Regards,
Praveen -
R3 4.7 upgrade to ECC 60 EHP5 spam error Program terminated jobRDDMNTAB
We're run upgrade procedure for development source system R/3 4.7 set 2.00 to ECC 6.0 EHP 5
on HP-UX 11.31, Oracle 9.2.0.8:
Latest version of SAPEXEDB-378 and SAPEXE-378 levels patch are installed.
-R3trans version 6.13 (release 640 - 19.01.11)
-tp version 340.16.67 (release 640)
-disp+work information
kernel release 640
kernel make variant 640_REL
compiled on HP-UX B.11.23 U ia64 for "hpia64"
compiled for 64 BIT
compilation mode Non-Unicode
compile time Oct 23 2011 20:47:12
update level 0
patch number 389
source id 0.389
- BRCONNECT 6.40 (52)
- spam version 6.20/0038
-SAPKB62068, SAPKA62068, SAPKH47021, SAPKE47018, SAPKIPYH52,
SAPKITLRB4,SAPK-10008INHRCEE, ST-A/PI 01N_620_R3 0000,SAPKGPIB04,
SAPKIPZH52 of support packages installed.
Result of manual running tp commands with options:
tp showbuffer SID pf=/usr/sap/SID/trans/bin/TP_DOMAIN_SID.PFL
This is tp version 340.16.67 (release 640)
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
SID buffer:
SAPKD62044 |will not be imported because it is tagged.
that makes 0 transports to be imported.
tp finished with return code: 0
meaning: Everything OK
When we're try install latest spam version 6.20/044, next 2 error's
occured at IMPORT_PROPER step:
Import steps not specific to transport request:
-Activate inactive runtime objects->Program terminated (job: RDDMNTAB,
no.: 20543600), Ended with return code: ===> 12 <===
in SM21:
14:50:48 BTC 15 000 DDIC Q0 E Signal 11 received by operating system
14:50:58 BTC 15 Q0 1 Start Workproc15, 7 times since system startup. PID 1104
14:50:58 BTC 15 000 DDIC F3 T Invalid object name for TemSe object: " "
14:50:58 BTC 15 000 DDIC EC F Failed to create log for job RDDIMPDP
14:50:58 BTC 15 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
(magic==X'NULL-ptr')
14:52:53 BTC 16 000 DDIC Q0 E Signal 11 received by operating system
14:52:58 BTC 16 Q0 1 Start Workproc16, 7 times since system startup. PID 1179
14:52:58 BTC 16 000 DDIC F3 T Invalid object name for TemSe object: " "
14:52:58 BTC 16 000 DDIC EC F Failed to create log for job RDDMASGL
14:52:58 BTC 16 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
(magic==X'NULL-ptr')
14:53:53 DIA 02 000 DDIC Q0 E Signal 11 received by operating system
14:53:54 DIA 02 Q0 1 Start Workproc 2, 3 times since system startup. PID 1233
14:53:54 DIA 03 000 DDIC Q0 E Signal 11 received by operating system
14:53:54 DIA 03 Q0 1 Start Workproc 3, 3 times since system startup. PID 1236
14:53:55 DIA 04 000 DDIC Q0 E Signal 11 received by operating system
14:53:55 DIA 04 Q0 1 Start Workproc 4, 3 times since system startup. PID 1239
14:54:07 RD S2 3 Connection to CPI-C client 050 was closed
14:54:07 RD S7 4 > Partner LU name:
14:54:07 RD S0 R > Host: yyyhost
14:54:07 RD S0 I > Partner TP Name: tp
14:54:07 DIA 01 000 DDIC SPAM R4 9 Communication error, CPIC return code 020, SAP return code 223
14:54:07 DIA 01 000 DDIC SPAM R5 A > Conversation ID: 76517657
14:54:07 DIA 01 000 DDIC SPAM R6 4 > CPI-C function: CMSEND(SAP)
14:54:07 DIA 01 000 DDIC SPAM TP 0 Tp call failed (RFC RC = 4: RFC message = ...)
В se37:
RDDIMPDP DDIC Complete 22.11.2011 14:54:04 -!!
RDDIMPDP DDIC Canceled 22.11.2011 14:50:48 -?
RDDMASGL DDIC Complete 22.11.2011 14:53:53 -!!
RDDMASGL DDIC Canceled 22.11.2011 14:52:53 -?
When we 'e try istall another component path (EA-APPL200 for example ), inspam 0038 we 'e see:
Error in phase: IMPORT_PROPER
Reason for error: TP_STEP_FAILURE
Return code: 0012
1 ETP108 tp path : "tp"
1 ETP109 version and release : "340.16.67" "640"
1 ETP198
4 EDA506 -> "/SDF/SWCM_PAT03D" Activation - - -
4 EDA492 Warnings: "0"
4 EDA483 Errors: "0"
4 EDA495 Total runtime: " "
1 ETP173 DISTRIBUTION OF DD-OBJECTS
1 ETP110 end date and time : "20111122145403"
1 ETP111 exit code : "0"
4 EDA492 Warnings: "0"
4 EDA483 Errors: "0"
4 EDA495 Total runtime: " "
1AETR012XProgram terminated (job: "RDDDIS0L", no.: "15141800")
4 EDA492 Warnings: "0"
4 EDA483 Errors: "0"
4 EDA495 Total runtime: " "
1 ETP173 DISTRIBUTION OF DD-OBJECTS
1 ETP110 end date and time : "20111122151518"
1 ETP111 exit code : "12"
SM21 the job RDDDIS0L canceled:
15:14:18 BTC 16 000 DDIC Q0 E Signal 11 received by operating system
15:14:19 BTC 16 Q0 1 Start Workproc16, 9 times since system startup. PID 1946
15:14:19 BTC 16 000 DDIC F3 T Invalid object name for TemSe object: " "
15:14:19 BTC 16 000 DDIC EC F Failed to create log for job RDDDIS0L
15:14:19 BTC 16 000 DDIC F2 0 Calling program reports invalid handle for TemSe object
(magic==X'NULL-ptr')
In 000-client under ddic i'm report RDDMNTAB scheduled( RDDNEWPP),class A(High).
for messages : "Failed to create log for job XXXX" for /usr/sap/YYY/SYS/global/000JOBLG directory( owner: yyyadm:sapsys) next command exeuted: chmod 777 /usr/sap/YYY/SYS/global/000JOBLG
Very difficult situation with this SPAM step's!...
How solve this problem?
PS. sorry for conjoint text, forums' bugs...
Edited by: Baurzhan Lekerov on Nov 22, 2011 4:05 PMWe're getting queue of required packages,new tp and R3trans versions, ABAP nad JAVA corrections for 702,stack.xml and stack_for_slm.xml from MOPZ and put this files under <sid>adm into download directory:
/backup_SID/INSTALL/EHP5_UPGRADE on server:
ll /backup_SID/INSTALL/EHP5_UPGRADE:
in this directory 6 directories with unzipped DVD:
drwxr-x--- BS7i2010_Java_Comp
drwxr-x--- exp_lang
drwxr-x--- exp_pack_all_components
drwxr-x--- export_ehp5 -> 2 Export DVD
drwxr-x--- ecc60_ehp5_components
drwxr-x--- upgr_master -> Upgrade Master
and other files from MOPZ queue:
-rw-rr SAPEXE_90-20006757.SAR
-rw-rr NW70BICNT70504_0-10007518.ZIP
-rw-rr XI7_1_SEM-BW_605-sp5.dlt
-rw-rr sidadm sapsys 2499937 Jun 9 12:14 XI7_1_SEM-BW_605-sp5.tpt
...... and more
We're started upgrade procedure with STARTUP script and on PREP_EXTRACT/KEY_CHK phase next error occured:
"ERROR: Scanning of download directory failed with the following error: No fix archive found in download directory"
in KEYCHK.LOG:
1 ETQ399 Scanning directory '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages'.
1 ETQ399 Found 697 files.
2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435' could not be recognized!
2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435.ZIP' could not be recognized!
2 ETQ399 Found #1 'EPS/in' in '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/EA-DFPS603.SAR'.
2 ETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/EA-DFPS603.SAR' determined as 'type=ABAPPACK'.
we're unzipped *.ZIP packages into download directory manually, but next error with *.tpt extensions occured again:
2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/XI7_1_FINBASIS_605-sp5.tpt' could not be recognized!
2 ETQ399 Setting action for '/backup_SID/INSTALL/EHP5_UPGRADE/K-604DHINISPSCA.SAR' to 'UNPACK_TRANS'.
2 ETQ399 Setting action for '/backup_SID/INSTALL/EHP5_UPGRADE/KW70205.SAR' to 'UNPACK_TRANS'
/upg/abap/log/CHECKS.LOG is empty.
cat PHASES.LOG :
1 ETQ201 Entering upgrade-phase "BEGIN_PRE" ("20111126195508")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = ''
4 ETQ399 Environment variables:
4 ETQ399 auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'PREP_EXTRACT/BEGIN_PRE'.
4 ETQ010 Date & Time: 20111126195508
cat SAPupchk.log :
This is SAPup release lmt_001 version 40.024 compile time 03:26:32 Nov 23 2011.
This is UNICODE SAPup!
..finished at 20111126195508 with status SUCCEEDED.
CURRENTPHASE PREP_EXTRACT/KEY_CHK
...started at 20111126195508
Using phase log file 'KEYCHK.LOG'.
...begin dialogue at 20111126195508
...end dialogue at 20111126204132
...begin dialogue at 20111126204449
...end dialogue at 20111126205544
...begin dialogue at 20111126205902
...end dialogue at 20111126212808
...begin dialogue at 20111126213133
...end dialogue at 20111126215359
...begin dialogue at 20111126215736
cat SCANCAR.LOG:
drwxr-xr-x 4096 20 Oct 2011 23:40 igs/dump
drwxr-xr-x 4096 20 Oct 2011 23:40 igs/log
-rwxr-xr-x 4 20 Oct 2011 23:44 igs/igshelper.lst
cat SCANCAR.SAV:
ENV: SAPSYSTEMNAME=KDV
ENV: auth_shadow_upgrade=0
ENV: dbms_type=ORA
ENV: dbs_ora_schema=SAPKDV
ENV: dbs_ora_tnsname=KDV
EXECUTING /oracle/KDV/usrsap/upg/abap/tools/SAPCAR (/oracle/KDV/usrsap/upg/abap/tools/SAPCAR) -tvf /backup_KDV/INSTALL/EHP5_UPGRADE/igsexe_3-20007786.sar
SAPCAR: processing archive /backup_KDV/INSTALL/EHP5_UPGRADE/igsexe_3-20007786.sar (version 2.01)
-rwxr-xr-x 31880896 30 Sep 2011 00:22 bwgis.so
-rwxr-xr-x 31720200 30 Sep 2011 00:22 bwgis_c.so
-rwxr-xr-x 36529288 30 Sep 2011 00:24 gfwchart.so
-rwxr-xr-x 36434128 30 Sep 2011 00:25 gfwchart_c.so
-rwxr-xr-x 189 30 Sep 2011 00:32 igsexe.lst
-rwxr-xr-x 438 30 Sep 2011 00:32 igsmanifest.mf
-rwxr-xr-x 34465896 30 Sep 2011 00:31 igsmux_mt
-rwxr-xr-x 15608480 30 Sep 2011 00:31 igspw_mt
-rwxr-xr-x 13518008 30 Sep 2011 00:32 igswd_mt
-rwxr-xr-x 12428336 30 Sep 2011 00:25 imgconv.so
-rwxr-xr-x 19683776 28 Sep 2011 02:20 libsapnwrfc.so
-rwxr-xr-x 10839352 30 Sep 2011 00:25 rspoconnector.so
-rwxr-xr-x 25510112 30 Sep 2011 00:19 sgxgis.so
-rwxr-xr-x 35754952 30 Sep 2011 00:23 xmlchart.so
-rwxr-xr-x 35659800 30 Sep 2011 00:23 xmlchart_c.so
-rwxr-xr-x 6072600 30 Sep 2011 00:25 zipper.so
Are ./STARTUP script can not find 6 DVD-directories in download directory?
or some problems with *>ZIP packages files? we're unzipped *.ZIP and getting *.tpz, *.tpt files in download directory.
What is *.tpz and *tpt-extensions files?
Cai I to ignore this messages in KEYCHK.LOG:
"2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/EHP5_SPackages/BSFOUND70205_0-20004435.ZIP' could not be recognized!
2WETQ399 File '/backup_SID/INSTALL/EHP5_UPGRADE/XI7_1_FINBASIS_605-sp5.tpt' could not be recognized!
At CURRENT PHASE PREP_EXTRACT/KEY_CHK next error message occured:
"Please enter mount points for the DVDs required for the upgrade.
Enter at least the mount point containing "Kernel DVD for OS HPUX_IA64 and Non-Unicode"
In donwload directory we're don/t have a Kernel DVD for EHP 5 HPUX_IA64 and Non-Unicode.
What is the DVD Kernel (7.01,702, 7.20 releases) we're need to download now?
Edited by: Baurzhan Lekerov on Nov 27, 2011 9:35 AM -
Issue with BDC processing of F-65 after upgrade to ECC 6.0
Dear ABAP gurus,
We have upgraded our SAP system from version 4.7 to ECC 6.0.
We are facing issue when processing BDC sessions for transaction code F-65.
The screen which appears for Assignment to a profitability segment creates issue when processing BDC for F-65.
The screen name is SAPLKEAK and the corresponding screen number is 0300.
This screen displays the characteristic and its corrsponding values. The characteristics and its values are pulled in from FICO Config at runtime when you execute F-65 and all relevant Tcodes of business transaction RFBU.
We checked for the characteristics maintained for Characteristic group via std. transaction code KEPA. It shows 4 characteristics listed of which 2 are optional and 2 are mandatory. The same settings are available in older version as well as in ECC 6.0. Also validated the assignment of characteristic group to the actual data i.e to the business transaction RFBU via Tcode KE4G.
When we do recording in SHDB in both the systems, the older version shows it correctly displaying 4 fields(2 optional and 2 mandatory) in the Assignment to a profitability segment screen whereas the new system displays some 12 additional fields. Also none of the fields appear mandatory.
The issue is we are still not able to identify whether this is a technical issue or functional issue.
Searched for relevant OSS notes but couldn't find any.
Anyone of you who have faced this issue, please respond immediately.
We have this issue to be resolved on high priority.
Help will be highly appreciated.
Regards,
KavitaThis issue was also posted with an OSS-message to SAP, and the solution was to run this program SD_PLANVALUE_UPDATE
Berit -
Need to find impact of Vertex O series upgrade on ECC and changes required?
Hello experts,
My client is upgrading Vertex series to O from Q.
As part of Q series, additional fields such street will be used to identify correct tax jurisdiction code in system.
Also, zip code used will be 9 digits (zip+4) instead of 5 digits.
We need to correct existing master data and open transactions in system with new jurisdiction code along with supporting new data in system.
Below are the questions:
1. What changes are required in ECC side to support new vertex series in interface etc?
2. How can we achieve integration of vertex O series with new master and transnational data getting created in system to have right TXJCD value?
3. What all possible solutions are available to correct master data and transnational data in system with correct TXJCD value?
Any pointers to experience with Vertex will be rewarded.
Thank you,
Gouri.Hi,
> 1. is there any dependency for the remaining systems in the landscape (SRM 5.0 SPS15, NW 7.0 SPS18, PI 7.1 SPS8, >SOLMAN EHP01 SPS22)?
As such there is no dependency between component you specified but SAP always says to be on latest patches. As far as solution manager is concerned you should have minimum support pack level Solman 7.0 SP17 but anyway you are more than that.
> 2. we are using AIX Version 5.3 and "DB2 v9.5.0.2", does it support ECC 6.0 EHP04 or do I need to upgrade?..
It is fine with your upgrade.
> 3. Java version for NW 7.0 is as follows:
> java version "1.4.2"
> Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
> Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20080122 (SR10) (JIT enabled: jitc))
> Does it support my requirement or any upgrade is required?
>
Java version is also fine.
Thanks
Sunny -
Hi,
We Recently upgraded our R/3 System from 4.6 C to ECC 6.0.
Shopping card number is getting created in SRM side and after approval it is getting sent to R/3 Back end,We have some customer fields that need to be populated in the back end from the shopping card,Which is not happening as of now.We are using the BAPI_PO_CREATE1 for creating the PO in R/3.We tried running the BAPI_PO_CREATE1 Standalone by giving the customer fields Table EXTENSIONIN and in Structure BAPI_TE_PO_ITEMS,But the custom fields are not populating in the PO.
Pls suggest,
Thanks
Rakesh.Hi Rakesh ,
1.wat is ur target table that ur custom fields were added using apped structure.
2. Have u passed the Communcation strucure also means
in ur case BAPI_TE_MEPOITEMX along with BAPI_TE_MEPOITEM .
Plz find similar code which is for sale order coding which may help u .
***Constant Declarations
Constant: C_BAPE_VBAP (9) type u2018BAPE_VBAPu2019,
C_BAPE_VBAPX (10) type u2018BAPE_VBAPXu2019
TYPES: BEGIN OF T_BAPE_VBAP,
VBELN TYPE VBELN_VA,
POSNR TYPE POSNR_VA,
ZZcontract_num type ZZcontract_num "Custom field
END OF T_BAPE_VBAP.
***Communication Fields
TYPES: BEGIN OF T_BAPE_VBAPX,
VBELN TYPE VBELN_VA,
POSNR TYPE POSNR_VA,
ZZcontract_numX type CHAR1,
END OF T_BAPE_VBAPX.
Declaring the Internal table and Work areas
DATA: I_EXTENSIONIN TYPE STANDARD TABLE OF BAPIPAREX. u201CInternal table for BAPI Extension Table
w_EXTENSIONIN like line of I_EXTENSIONIN, u201CWork area for BapiExtension Table
I_return type standard table of bapiret2,
W_return like line of i_return,
is_BAPE_VBAP type T_BAPE_VBAP, u201CStructure declaration
is_BAPE_VBAPX type T_BAPE_VBAPX, u201CStructure declaration
v_vbeln type BAPE_VBAP-VBELN, u201CVariable for the doc no
v_posnr type BAPE_VBAP-POSNR, u201CVariable for the itemnumber
v_zzcontract_num type BAPE_VBAP-ZZcontract_num, u201CVariable for the Contract number
Filling the BAPI table Extension Structure.
W_BAPE_VBAP-VBELN =u201D00001234u2019.
W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontract = 'ABC123'.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAP.
w_EXTENSIONIN+30 =W_BAPE_VBAP.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN..
k_BAPE_VBAP-VBELN =u201D00001234u2019.
W_BAPE_VBAP-POSNR =u2019000010u2019 .
W_BAPE_VBAP-ZZcontractx = 'X'.
*********same to pass Communication Structure.
W_EXTENSIONIN-STRUCTURE = C_BAPE_VBAPX.
w_EXTENSIONIN+30 = W_BAPE_VBAPX.
APPEND W_EXTENSIONIN TO I_EXTENSIONIN.
CLEAR w_EXTENSIONIN.
6) Then Call BAPI u2018BAPI_SALESORDER_CHANGE u2018to Update Sale Order with Contract number
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_SALORD_NUMBER
ORDER_HEADER_IN = K_ORDER_HEADER_IN
ORDER_HEADER_INX = K_ORDER_HEADER_INX
TABLES
RETURN = I_RETURN
ORDER_ITEM_IN = I_ORDER_ITEM_IN
ORDER_ITEM_INX = I_ORDER_ITEM_INX
EXTENSIONIN = I_EXTENSIONIN.
****COMMIT WORK AND WAIT.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
Hope it may help you
Rgds
Sree -
Upgrade to ECC 6.04 PHASE: MAIN_NEWBAS/PARCONV_UPG ERROR
Hi
get error in Upgrade to ECC 6.04 in downtime phase - MAIN_NEWBAS/PARCONV_UPG.
The screen says:
Checks after phase MAIN_NEWBAS/PARCONV_UPG were negative!
Last error code set: Conversion entries have been found in, see phase log for more detaile
In the SAPup.log says that:
CURRENTPHASE MAIN_NEWBAS/PARCONV_UPG
...started at 20110324123904
Using phase log file 'PARCONV.LOG'.
..finished at 20110324124157 with status ERROR CHECKING MODEFLAGS.
Error message set: 'Conversion entries have been found in, see phase log for more detaile'
...begin dialogue at 20110324124157
And in the PARACONV.ELG file says:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARALLEL ALTER TABLES MODEFLAG RESET: RSMFCONV and RETURN CODE in RSMFCONV.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MVNTABS ERRORS: ddlntabs and RETURN CODE in PD990324.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV01.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV02.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV03.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MVNTABS ERRORS: delntabs and RETURN CODE in PL000324.DEV
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
I look this log files ( RSMFCONV.DEV RSMFCONV.DEV PD990324.DEV NCONV00.DEV NCONV01.DEV NCONV02.DEV NCONV03.DEV PL000324.DEV ) but all of this, is exit code '0'
I don't know where is the error.
Any idea for helpme,
thanks in advise.
Sergio.
Edited by: Sergio Mazzeo on Mar 24, 2011 1:24 PM
The last lines of the PARACONV.LOG says that:
4 ETQ260 Starting batchjob "NTBUF_SYNC"
4 ETQ230 Starting RFC Login to: System = "DEV", GwHost = "LKMDEV", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="DEV", Nr="00", GwHost="LKMDEV", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ233 Calling function module "subst_start_batchjob" by RFC
4 ETQ399 JOBNAME='NTBUF_SYNC', REPNAME='RSNTSYNC', VARNAME='', BATCHHOST='LKMDEV', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110324124156
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
3 ETQ399 log analyse: search for '.[WT ]' in '^N......\.DEV$'
1 ETQ399 Conversion entries found:
2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL 0CNVIE20110323DDIC
4 ETQ001 START time "No modeflag to check for"
1 ETQ206 Executing pre-phase DB specific actions.4 ETQ010 Date & Time: 20110324124157The last lines of the file PARACONV.LOG says that:
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
3 ETQ399 log analyse: search for '^.[^WT ]' in '^N.......DEV$'
1 ETQ399 Conversion entries found:
2 ETQ399 CONV ENTRY TBATG TABL/SCMB/TREEVIEW2 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLCMS_RE_OBJ_SPC 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLCNVCDMC_PROJHIER 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOB_COND_DIFF 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_AMT 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_BDT 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DATE 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_DIFF 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_COND_FMOD 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOC_LIST_COND 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLFICOT_DATEPOS 0CNVIE20110322DDIC
2 ETQ399 CONV ENTRY TBATG TABLGMBDGTLSTNUMBER 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLGMGRSPONSOREDOBJ 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLHRWEB_RULE_GROUP 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLT5RSOP_SCHEME 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_FSTAT 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_PRD_PRD_SET 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_BPRL 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCMS_RE_EX_TYP 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCWB_CATT_HEADER 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTCWB_ITEM_POOL 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLTJBR_US_ACCT_T 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLVALT_SP_VAL_SEC 0CNVIE20110323DDIC
2 ETQ399 CONV ENTRY TBATG TABLVDDD_HEADER_COL 0CNVIE20110323DDIC
4 ETQ001 START time "No modeflag to check for"
1 ETQ206 Executing pre-phase DB specific actions.
4 ETQ010 Date & Time: 20110324124157
Can any helpme to this error. I don´t know what and where is the error. Not found this item in SAP Notes.
Thansk a lot.
Sergio.
Maybe you are looking for
-
Moving an iTunes library from one computer to another that isn't consolidated
My iTunes library is made up of music from a variety of sources. This is due to the files being stored on a server and organised in folders in a particular way already. I want to transfer my iTunes library to a brand new computer, but am aware it may
-
Hello. I'm quite new to all this so be nice. I upgraded to Lion recently and notice I now cannot for the life of me get the Dashboard to open up. I've read all sorts of advice, in particular about deleting .plist files relating to Dashboard and hav
-
How to Upload without creating a "Site"?
Hi, is it possible to upload a page to my server using FTP without creating a "site"? For example: I created an .htlm page on my desktop named "Site Maintenance" to use when my site is down. This page is not part of a "Site". I connected to the serve
-
Where are my Photos and Music after running Migration Assistant
Ran Migration Assistant to bring over all information for my new MacBook Pro from my old MacBook Pro can't locate my iTunes and my iPhoto library. I ended up running Migration Assistant twice and appears I have duplicate information for lots of items
-
Drag and Drop Interaction - Drops Items
Hi I am using the new Interaction template for Drag and Drops. This seems to work great but there is one thing I am struggling to do. Is there anyway you can restirct how many items can be placed on a drop zone? At the moment you can drop more than o