Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PM

Hello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony

Similar Messages

After upgrade ECC to EHP4 errors appears (STMS tp check)

Hi!
Configuration
Two dialog instance. Central instance works on cluster node. DI works on standalone server. Message server and enq server is separate instanse(ASCS) installed on windows cluster
Check TP
'Could not start transport control program tp RFC error: timeout during allocate / CPIC-CALL:'ThSAPCMRCV''
This error happens only on DI installed on standalone server. If checks tp is started on central instance than error does not appear.
dev_rfc.trc
ERROR file opened at 20120224 135020 Russian Standard Time, SAP-REL 701,0,150 RFC-VER 3 1260209 MT-SL
T:9800 Error in program 'C:\usr\sap\QUA\D00\exe\tp': ======> CPIC-CALL: 'CMACCP : rc=20
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'clusterpqua.internal.russ-ergo.com:3300' not reached
TIME Fri Feb 24 13:50:20 201
RELEASE 701
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2845
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1

Hi,
ERROR partner 'clusterpqua.internal.russ-ergo.com:3300' not reached
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
Check few points:
1. Is DI installation is domain installation ?
2. Is DI standalone server is a member of domain ?
3. Are you able to ping and connect (telent) to system "clusterpqua.internal.russ-ergo.com" on port 3300 ?
4. Are you able to access share "
clusterpqua\sapmnt\trans" from DI Server ?
Hope, it will help to resolve the issue...
Regards.
Rajesh Narkhede

Error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC - EHP3 upgrade

Hello all,
Using SUM while running SCM 7.0 EHP3 upgrade I am getting error in phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC:
Checks after phase MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC were negative!
Last error code set: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'<br/> 1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
ERROR: Detected the following errors:
# D:\SUM\abap\log\PD000203.SCD:
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C1_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
3 ETP000
2WETP000 11:10:14: Retcode 1: error in DDL statement for "/1CRR/TG00003781 " - repeat
2EETP345 11:10:26: Retcode 1: SQL-error "2726-Partition function '/BIC/FZT_DEL_C1_PFUN000' uses 1 c
2EETP345 olumns which does not match with the number of partition columns used to partition the tab
2EETP345 le or index." in DDL statement for "/1CRR/TG00003781 "
2 ETP000 --------------- DB-ROLLBACK() ---------------
2EETP334 11:10:26: error in DDL, nametab for "/1CRR/TG00003781" not activated
3 ETP000 NOT NULL )
3 ETP000 ON [/BIC/FZT_DEL_C2_PSCH000]
3 ETP000 WITH ( DATA_COMPRESSION = PAGE )
...skipped 18 more lines. Please see MVNTFDC.html for more information.
I checked some other log files:
MVNTFDC
1 ETQ201 Entering upgrade-phase "MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC" ("20150203110951")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00' Client = '000'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHDRUN/SUBMOD_FDC_RUN/PARMVNT_FDC'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'TP_MOVENTABS_SHD'
2 ETQ399 Arg[1] = 'INTDEL;INTACT;NOBUFFRESET;SHADOW_ONLY'
2 ETQ399 Arg[2] = 'MF=F,STEP=T,RANGE-TS'
2 ETQ399 Arg[3] = 'MVNTFDC.TP0'
1 ETQ399 Using error summary log 'MVNTFDC.ELG'.
1 ETQ399 Using 8 parallel processes
2 ETQ399 Empty putsteps - configuring at least parallel batches and main import processes.
2 ETQ399 Distribute 8 parallel processes to 2 tp and 4 R3trans.
4 ETQ380 computing toolpath for request "TP_MOVENTABS_SHD"
4 ETQ381 request "TP_MOVENTABS_SHD" means "tp mvntabs for shadow tables"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_SHD"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "D:\SUM\abap\exe"
2 ETQ399 Starting 8 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 7444 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 7444
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 4888 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=01" "seltsize=1" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP01.ECO'.
2 ETQ399 Started tp ddlntabs with pid 4888
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9100 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=02" "seltsize=2" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP02.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9100
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 736 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=03" "seltsize=3" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP03.ECO'.
2 ETQ399 Started tp ddlntabs with pid 736
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 8864 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=04" "seltsize=4" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP04.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8864
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9264 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=05" "seltsize=5" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP05.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9264
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 9732 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=06" "seltsize=6" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP06.ECO'.
2 ETQ399 Started tp ddlntabs with pid 9732
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203110952: PID 11492 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=07" "seltsize=7" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP07.ECO'.
2 ETQ399 Started tp ddlntabs with pid 11492
3 ETQ123 20150203110954: PID 9264 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 7444 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 4888 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 736 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110954: PID 9732 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 11492 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 9100 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
3 ETQ123 20150203110956: PID 8864 exited with status 0 (time 0.000 real)
2 ETQ399 tp ddlntabs finished with exit code 0.
2 ETQ399 Looking for pattern 'PD00....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD000203.SCD'.
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 9525 to 12695 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
2 ETQ399 Looking for pattern 'PD01....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD010203.SCD'.
1 ETQ124 Scanned file 'log\PD010203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD01....\.SCD'
2 ETQ399 Looking for pattern 'PD02....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD020203.SCD'.
1 ETQ124 Scanned file 'log\PD020203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD02....\.SCD'
2 ETQ399 Looking for pattern 'PD03....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD030203.SCD'.
1 ETQ124 Scanned file 'log\PD030203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD03....\.SCD'
2 ETQ399 Looking for pattern 'PD04....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD040203.SCD'.
1 ETQ124 Scanned file 'log\PD040203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD04....\.SCD'
2 ETQ399 Looking for pattern 'PD05....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD050203.SCD'.
1 ETQ124 Scanned file 'log\PD050203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD05....\.SCD'
2 ETQ399 Looking for pattern 'PD06....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD060203.SCD'.
1 ETQ124 Scanned file 'log\PD060203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD06....\.SCD'
2 ETQ399 Looking for pattern 'PD07....\.SCD'
2 ETQ399 Wasting log file 'D:\SUM\abap\log\PD070203.SCD'.
1 ETQ124 Scanned file 'log\PD070203.SCD' from offset 3394 to 6564 for errors.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD07....\.SCD'
2 ETQ399 Starting 1 tp processes:
4 ETQ010 Starting: tp ddlntabs operation
3 ETQ121 20150203111013: PID 8692 execute 'D:\SUM\abap\exe\tp "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"' in background, output written to 'D:\SUM\abap\log\TP00.ECO'.
2 ETQ399 Started tp ddlntabs with pid 8692
3 ETQ123 20150203111050: PID 8692 exited with status 8 (time 0.000 real)
2EETQ399 tp ddlntabs failed with exit code 8.
2 ETQ399 Operation 'ddlntabs' looking for pattern 'PD00....\.SCD'
1 ETQ124 Scanned file 'log\PD000203.SCD' from offset 12805 to 18826 for errors.
4 ETQ399 html file conversion from 'D:\SUM\abap\log\MVNTFDC.ELG' to 'MVNTFDC.html' succeeded.
4 ETQ010 Date & Time: 20150203111051
1EETQ399 Last error code set is: Single errors (code > 8) found in logfile 'MVNTFDC.ELG'
1 tp processes returned errors. View latest 'TP*.ECO' files in log-directory for details
1EETQ203 Upgrade phase "PARMVNT_FDC" aborted with errors ("20150203111051")
TP00.ECO
SAPup> Starting subprocess in phase 'TP_ACTION_CP2SINI' at 20150202112054
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\CP2SHDI.TPP" r3e SAPKBBF740 -s SCD u18
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
This is D:\SUM\abap\exe\R3trans.exe version 6.24 (release 741 - 11.08.14 - 17:21:00).
unicode enabled version
D:\SUM\abap\exe\R3trans.exe finished (0004).
INFO: No client specified on command line. Taking client 0 from E070C.
tp finished with return code: 4
meaning:
A tool used by tp produced warnings
SAPup> Process with PID 7592 terminated with status 4 at 20150202112055!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213004
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150202213118
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 5336 terminated with status 8 at 20150202213638!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102328
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203102350
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 10396 terminated with status 8 at 20150203102427!
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203110952
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" "seltsize=0" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 0
meaning:
Everything OK
SAPup> Starting subprocess in phase 'PARMVNT_FDC' at 20150203111013
    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
    ENV: PATH=D:\SUM\abap\exe;D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Imaging\;C:\Program Files\System Center Operations Manager 2007\;D:\Program Files\Microsoft SQL Server\100\Tools\Binn;D:\usr\sap\SCD\SYS\exe\uc\NTAMD64
    ENV: SAPSYSTEMNAME=SCD
    ENV: dbms_type=mss
    ENV: dbs_mss_schema=scd
    PWD: D:\SUM\abap\tmp
EXECUTING D:\SUM\abap\exe\tp.EXE "pf=D:\SUM\abap\var\MVNTFDC.TPP" ddlntabs SCD "ddlmode=F" "step=T" "protyear=00" shadow_only "strel=701" "substext=4G" "-Dbuffreset=no"
This is D:\SUM\abap\exe\tp.EXE version 380.27.37 (release 741, unicode enabled)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
SAPup> Process with PID 8692 terminated with status 8 at 20150203111050!
Can someone please help ?

Hi Pankaj,
did you get any solution for this issue ? I am also facing the same error in my BW upgrade to EHP3.
Please share the solution if you get any.
Regards,

Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5

Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh Jagtap

Dear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek

EHP4 upgrade: Error in Phase ACT_UPG

Hi All,
While upgrading to EHP4 on ECC 6 system, we got error in phase MAIN_SHDRUN/ACT_UPG
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer RH4 Check logfiles 'ACTUPG.ELG' and '/sapdump/SAPehpi/EHPI/abap/log/SAPehpi.ECO'
ACT_UPG log:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-604DMINISPSCA.RH4
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code           : "12"
Log of SAPA-604DMINISPSCA.RH4
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP101 transport order     : "SAPK-604DMINISPSCA"
1 ETP102 system              : "RH4"
1 ETP108 tp path             : "/sapdump/SAPehpi/EHPI/abap/exe/tp"
1 ETP109 version and release : "372.04.70" "700"
1 ETP198
3 EPU324 See log for request "/sapdump/SAPehpi/EHPI/abap/tmp/SAPAB70015.RH4" (timestamp "01:26:08", system "RH4")
1AETR012XProgram terminated (job: "RDDMASGL", no.: "01260600")
1AEPU320 See job log"RDDMASGL""01260600""RH4"
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time   : "20091012033215"
1 ETP111 exit code           : "12"
1 ETP111 exit code           : "12"
Job RDDMASG log :
Job cancelled with following log
2.10.2009 01:26:07 Job started                                                               00           516          S
2.10.2009 01:26:07 Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)      00           550          S
2.10.2009 01:26:08 Start of mass activation 01:26:08                                         AD           010          S
when tried to log into shadow instance after getting error, it is giving error
RH4: system message
work process restarted; session terminated;
we restarted shadow system. There is no dumps in the shadow system.
Work process getting killed after 7800s
checked in work directory of Shadow system: devdisp log :_*
Mon Oct 12 04:49:46 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1694]
***LOG Q0K=> DpMsAttach, mscon ( HW136799) [dpxxdisp.c   12639]
DpStartStopMsg: send start message (myname is >HW136799_RH4_22                         <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 20477 MB.
It should be configured with at least 20 GB on 64 bit systems.
See note 153641 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1972 MB!
Minimum value is 8192 MB.
Recommended size is 75 % of RAM + swap.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Oct 12 04:49:47 2009
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Oct 12 06:57:01 2009
ERROR => DpWPCheck: W8 (pid 9769) died (severity=0, status=7) [dpxxdisp.c   15776]
child (pid=9769) killed with signal 7
Mon Oct 12 06:57:43 2009
ERROR => DpWPCheck: W7 (pid 9768) died (severity=0, status=7) [dpxxdisp.c   15776]
child (pid=9768) killed with signal 7
Please let us know what needs to be cheked for the problem
Thanks,
Ramesh Ramagowni

Hi Markas and All,
Thanks for the information. /dev/shm was 100% full. now, the issue is solved after deleting its contents. and we have finished with EHP4 upgrade.
After upgrade, SAP_AP component still showing as 700
SAP_AP - 700 - 0015 - SAPKNA7015 -SAP Application Platform
Can we delete old tablespace PSAPSR3700, it is showing as 0% used in brspace at present.
Also while trying to move some datafiles using brtools after upgrade we are getting following error,
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.52
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/RH4/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRTOOLS time stamp: 2009-10-20 01.45.54
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
There is no file in the directory '/oracle/RH4/sapbackup/.user.pas'
Please suggest what needs to be for this issue..Do we need to upgrade BRTOOLS..
Thanks,
Ramesh R

Error in PREP_EXTENSION/EHP_INCLUSION! phase

Hi Experts,
I am in Support pack stack upgrade activity from SPS10 to SPS11 through SUM.Our environment is ERP6.0-->Ehp5,OS400,DB2.
I am getting error in PREP_EXTENSION/EHP_INCLUSION! phase.
Last error code set: Disassembling patch queue failed rc = 3, reason = 'Error when creating cofile for transport request SAPKITAB7J'<br/> If you put new packages in the download directory, use option 'init' to upload them .
Can some one please help me to resolve the issue.

Hello
2WETQ399 File '/z_tmp/SPS11_SE4/KGS6024' size 0kB could not be recognized!
2WETQ399 File '/z_tmp/SPS11_SE4/KH60511' size 0kB could not be recognized!
2WETQ399 File '/z_tmp/SPS11_SE4/KITAB7J' size 0kB could not be recognized!
2EETQ095 Disassembling package queue failed, rc = "3", reason = "Error when creating cofile for transport request SAPKITAB7J"
4 ETQ399 Deleting '/DEV4DD0/usr/sap/SE4/SUM/abap/data/RITAB7J.SAP'.
1EETQ399 Last error code set is: Disassembling patch queue failed rc = 3, reason = 'Error when creating cofile for transport request SAPKITAB7J'
I see most of the files with 0 KB size.
Try updating the SAPCAR file.
If you have uploaded a newly downloaded package then stop the SUM tool completely.
Restart the SUM tool and start the phase again.
You need to make sure all the packages are good and there is enough free space in the transport directory.
Regards
RB

ERP - EHP5 upgrade - error in phase Preprocessing - MAIN_SHDRUN/DDIC_UPG

Dear SAP,
I have started my upgrade from ERP EHP4 to EHP5.
During phase PreProcessing - the phase MAIN_SHDRUN/DDIC_UPG fails for the following reason :
In TP.SAV, I have this error :
ERRORS: Highest tp internal error was: 0232
TRACE-INFO: 32: [     dev trc,00000]     OCIServerAttach(OCI_DEFAULT) failed with SQL error 12537:                       58 0.045050
TRACE-INFO: 35: [    dbsloci.,00000] *** ERROR => CONNECT failed with sql error '12537'                                 32 0.045096
TRACE-INFO: 36: [     dev trc,00000]     set_ocica() -> SQL error code 12537                                             15 0.045111
TRACE-INFO: 38: [     dev trc,00000]     OCIErrorGet -> SQL error code: 12537                                            51 0.045175
TRACE-INFO: 41: [     dev trc,00000] SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537.                               28 0.045221
TRACE-INFO: 43: [    dblink ,00000] ***LOG BY2=>sql error 12537 performing CON                                        60 0.045304
ERRORS: Highest tp internal error was: 0232
I have already changed the R3trans and tp executable.
Any help is very welcome.
Best regards
SAP NetWeaver Admin

Hi,
The phase is stopped with the following error
ERROR => CONNECT failed with sql error '12537'
SAPUSER or connect error 99=DBSL_ERR_DB, oerr=12537.
***LOG BY2=>sql error 12537 performing CON
***LOG BY0=>ORA-12537: TNS:connection closed
1AETW000 ===> HALT: reconnect to DB failed Please contact the SAP support.
4 ETW000 End of Transport (0016)
This issue is caused by misconfigured parameters for Oracle. The main
ones are the parameters: PROCESSES and SESSIONS.
Please check SAPnote # 1431798 and correct/increase the parameters.
then repeat the phase to proceed further with the upgrade.
Thank You.
Regards,
Deepika

EHP4 on SAP ERP6.0 stuck in phase GET_CLONE_SIZE, see file HUGETABS.LST

Hi,
We are applying EHP4 on SAP ERP6.0.
We are getting the following error in Phase GET_CLONE_SIZE.
"Some tables which should be cloned during the set up of the shadow system are too big. See table D:\EHP4_Install\EHPI\abap\log\HUGETABS.LST."
In the Note 1245473 it is mentioned..
"Phase GET_CLONE_SIZE, file HUGETABS.LST
SAPehpi checks the tables in the database which will be cloned to the shadow system later on during the installation. An error is reported if the size of any of those tables exceeds a threshold value. The rationale for this is to prevent SAPehpi from copying probably unnecessary data that can significantly increase the installation runtime and cause database problems. Create a message for SAP development support (component BC-EHP-INS-TLA) to check if the data in the tables reported in HUGETABS.LST is really needed for the operation of the shadow system."
The table HUGETABS.LST contents in my case is
STXH 78286112
STXL 43674792
Can anybody help what this error could be and what can be the possible solutions as we are still waiting for reply from SAP.
Regards,
Yatindra

Pls set the parameter max_clone_tab_size = 90000000 in file SAPehpi.par (value biger than the bigges table) and pls care about space in database and database parameters.
Kind regards,
Mirek

Upgrade error in Phase STARTSAP_NBAS

Dear Experts,
We are doing ECC 5.0 upgrade to ERP6.0 SR3 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out. and through SU01 its not allowing to reset the password of DDIC user using SAP* and its showing " adress is inconsistant".
Please help
Regards,
Pillai.

Hi,
Could you try the steps from below thread?
STARTSAP_NBAS DDIC password locking out
Also, when you try resetting the password from SAPGui - do you get a dump in SU01? The address inconsistency warning can
be skipped in my opinion.
Regards,
Srikishan

Error in PHASE ACT_UPG: Upgrade SAP R/3 4.7 to SAP ECC 6.0 EHP

Hello,
I'm facing an error in phase MAIN_SHDRUN/ACT_UPG (see errors below).
After searching for the errors I found postings with advice to change R3trans and tp to the newest version. Strangely system did not take the newest kernelpatch I stored in upgrade folder. So I changed the files in the /usr/sap/SID/abap/exe folder and repeated the phase.
But the error is still there.
A solution was to reset the queue, but this is only possible with help by sap.
Error in phase: DDIC_ACTIVATION
So I'm waiting for their reaction since two days, but nothing happens.
My questions are now:
what happens if I use the option "initialize phase ACT_UPG to restart it from beginning"? Will the new R3trans be used? Have we got to to the SPDD again?
What happens if I use the option "accept non severe errors and repeat phase ACT_UPG? Are these language errors "non-severe"?
Errors:
In error log ACTUPG.ELG I find logs like:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-60016INERECRUIT.REX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "8"
In error log SAPup.ECO I find:
EXECUTING /usr/sap/REX/upg/abap/exe/tp (/usr/sap/REX/upg/abap/exe/tp) pf=/usr/sap/REX/upg/abap/bin/ACTUPG.TPP put REX
This is /usr/sap/REX/upg/abap/exe/tp version 376.01.14 (release 701)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
tp finished with return code: 8
meaning:
A tool used by tp produced errors
Process with ID 13163 terminated with status 8
In the last touched SP-File SAPAAAA701.SID I can find errors like:
"1EEDO545 "LANG" "DTEL" "*": Object information could not be imported"
Regards,
Julia

After pushing the message at SAP I got the following answer:
It is the problem from note 1417505. There is no guarantee that all objects where imported with the used R3trans. A rerun of phase will be unsuccessfully because error came up in DDIC_IMPORT.
A reset of the queue is only possible if SPAM/SAINT is used for importing support packages. In case of upgrade, like here, the upgrade has got to be resetted as described in upgrade guide.
After start between phase extraction and configuration the newest R3trans has got to be copied manually in /abap/exe folder.
Regards,
Julia

Error: DEPLOY_ONLINE Phase : Upgrade

hi
We are upgrading NW2004 to NW2004s
(EP 6 SP16 to EP 7 SP10)
we got stuck in following phase below
system info
OS: Win2K3
DB: Oracle 9.2.0.6 Upgraded to Oracle 10.2.0.2
SAP: EP6 SP16 <b>Upgrading</b> to EP7 SP10
following is the log file attached
DEPLOY_SLOT_0_DON_03.log
Sep 17, 2007 4:34:50 PM Info: Starting: Update: Selected development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000' updates currently deployed development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000'.
Sep 17, 2007 4:34:50 PM Info: SDA to be deployed: F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda
Sep 17, 2007 4:34:50 PM Info: Software type of SDA: library
Sep 17, 2007 4:34:50 PM Info: ***** Begin of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Sep 17, 2007 4:34:51 PM Info: Begin of log messages of the target system:
07/09/17 16:34:50 - ***********************************************************
07/09/17 16:34:50 - Start deploying library JAR F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda...
07/09/17 16:34:51 - Library F:\usr\sap\MYP\JC00\SDM\root\origin\sap.com\tc\sdt\cvl\SAP AG\7.0004.20050509132518.0000\sap.comtcsdt~cvl.sda successfully deployed on the server.
Sep 17, 2007 4:34:51 PM Info: End of log messages of the target system.
Sep 17, 2007 4:34:51 PM Info: ***** End of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Sep 17, 2007 4:34:51 PM Info: Finished successfully: development component 'tc/sdt/cvl'/'sap.com'/'SAP AG'/'7.0004.20050509132518.0000'
Sep 17, 2007 4:34:51 PM Info: Starting: Initial deployment: Selected software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.4.1.20050921171800' will be deployed.
Sep 17, 2007 4:34:51 PM Error: Aborted: software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.4.1.20050921171800':
No further description found.
Sep 17, 2007 4:34:52 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Sep 17, 2007 4:34:52 PM Error: -
At least one of the Deployments failed -
Sep 17, 2007 4:34:52 PM Info: Summarizing the deployment results:
Sep 17, 2007 4:34:52 PM Warning: Warning: F:\usr\sap\JUPGRADE\data\archives\EPBC04_1.SCA
Sep 17, 2007 4:34:52 PM Warning: Warning: F:\usr\sap\JUPGRADE\data\archives\NWMADMIN04_1.SCA
Sep 17, 2007 4:34:52 PM Error: Aborted: F:\usr\sap\JUPGRADE\data\archives\SAPJTECHS04_1.SCA
Sep 17, 2007 4:34:52 PM Error: Processing error. Return code: 4
DEPLOY_ONLINE_DON_03.log
ols.procx.DefaultProcessAdapter.checkReturnCode(DefaultProcessAdapter.java:530)#Java###Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.##
#1.5#C000AC1904D2000000000B5E00D19BC800043A52C62F1410#1190027093546#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.j2ee.tools.sdmprocess.AbstractSDMProcessCall.deployList(AbstractSDMProcessCall.java:705)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.tools.sdmprocess.AbstractSDMProcessCall.deployList(AbstractSDMProcessCall.java:705)#Java###Cannot execute Java process for deployList with parameters F:/usr/sap/JUPGRADE/tmp/SLOT.DEPLOY.PRE.01.LST.##
#1.5#C000AC1904D2000000000B5F00D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess.execute(PhaseTypeSDMProcess.java:681)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess.execute(PhaseTypeSDMProcess.java:681)#Java###Error while executing SDM process phase with action DEPLOY_SLOT. See F:
usr
sap
JUPGRADE
log
DEPLOY_SLOT_0__DON_03.LOG for details.##
#1.5#C000AC1904D2000000000B6000D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#Java###Phase has been completed.#1#UPGRADE/UPGRADE/DEPLOY_ONLINE#
#1.5#C000AC1904D2000000000B6100D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#Java###Start time: .#1#2007/09/17 16:20:59#
#1.5#C000AC1904D2000000000B6200D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#Java###End time: .#1#2007/09/17 16:34:53#
#1.5#C000AC1904D2000000000B6300D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#Java###Duration: .#1#0:13:54.062#
#1.5#C000AC1904D2000000000B6400D19BC800043A52C62F5290#1190027093562#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/DEPLOY_ONLINE##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#Java###Phase status is .#1#error#
kindly provide solution for this
kindly do the needful
regards
SHOEB

Hi,
The problem is with the SDM (Most probably).
Kinldy make sure that your SDM is running properly!
YOu can check this via jcmon utility.
" jcmon pf=PATH_FOR_INSTANCE_PROFILE "
for exmaple : " jcmon pf=/usr/sap/C11/sys/profile/C11_JC00_testpc "
You might need to change the SDM mode to standalone
Please refer the lilnk for details on that.
http://help.sap.com/saphelp_nw04/helpdata/en/4e/67118041b142f8a6b4d5bf8ca56422/content.htm
I hope this helps you! incase if not please intimate me....
Regards,
Prem

Error at Phase SHDINST_OS in 4.71 upgrade

Hi,
I am getting the below error. i created a service SAPDEV_01 by using the below give syntax, it was created but when i am trying to start that service(SAPDEV_01) i am getting an error called " cannot start the service in the local computer. error1069: service could not start due to logon failure." so please help me in solving below error:
START OF PHASE SHDINST_OS
An error occurred during the installation of the
SAP service SAPDEV_01:
Possibly the password for user .\SAPServiceDEV entered in phase
INITPUT was wrong. You can reset it by calling 'R3up set stdpar'.
Try to execute SAPSTARTSRV.EXE manually using the following syntax:
C:\usr\sap\put\exe\sapstartsrv.exe -r
-p C:\usr\sap\put\DEV\SYS\profile\START_DVEBMGS01_home1 -s DEV -n 01
-U .\SAPServiceDEV -P <PASSWORD> -e HOME1\devadm
and check if the service SAPDEV_01 can be stopped and restarted.

this post is duplciated at Re: Error at Phase SHDINST_OS in 4.71 upgrade

SAINT error in phase DISASSEMBLE

Hi,
I am performing Delta-upgrade of component ST-SER from 700_2007_1 to 700_2008_1 via SAINT on our Solution Manager 4.0 system. (Windows server 2003 / MS SQL)
The SAR archive (KITLONB.SAR) is of 141 MB.
while trying to uncar i get following message:
SAPCAR: processing archive D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR (version 2.01)
x EPS/in/CSR0120031469_0029513.ATT
x EPS/in/CSR0120031469_0029513.PAT
SAPCAR: error reading from D:\SPS17\ST-SER_2008\Inst\KITLONB.SAR
But the EPS files have been loaded in the system & visible in the queue as well.
The import fails in phase DISASSEMBLE with following error:
Error in phase - DISASSEMBLE
Reason for error - PATCH_FILE_READ_ERROR
Return code - 12
Error message - OCS Package : SAPKITLONB
File has Full Control given to groups Administrator, SAP_LocalAdmin and SYSTEM.
What could be the reason?

Check your SAPCAR executable.
File hasn't been uncared properly. You may uncar on your desktop and then transfer to server.
Other option is to load from SAINT tool > Load > Package from Application Server > Give location and it will uncar at right place.
Thanks,
Digesh
Edited by: digeshjoshi on Aug 14, 2009 5:01 PM

SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE due to inactive object

Hi ,
SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE with the following errors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REPACHK ERRORS and RETURN CODE in GET_INACTIVE_SAP_OBJECTS.SMG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETG040 Start time.....: "17.06.2014" "00:13:43"
4 ETG039 -------------------------------------------------------------------------
4 ETG010 "533 inactive objects found" " " " " " "
4 ETG010 "257 inactive SAP objects" "colliding with import queue found." " " " "
4 ETG010 "Please contact the development team" "to either activate or discard the inactive object." " " " "
2EETG010 "The following objects are inactive" "in the system:" " " " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCDEF" " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCIMP" " "
2EETG010 "LIMU" "CINC" "/1WDA/CBUSINESS_GRAPHICS======CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_AC_CUSTOM_TEMPLATE=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_AC_MO_TEMPLATE=============CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPUB" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CINC" "CL_AC_TEMPLATE_REPOSITORY=====CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CINC" "CL_AI_SC_REFRESH==============CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_GENERIC_DATALOADER=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCDEF" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCMAC" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRO" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCDEF" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCIMP" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCMAC" " "
2EETG010 "LIMU" "CLSD" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRI" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRO" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPUB" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPRI" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRO" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPUB" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CLSD" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CLSD" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "CPUB" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM008" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM009" " "
2EETG010 "LIMU" "CLSD" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CLSD" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CPUB" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CLSD" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CPUB" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CLSD" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CLSD" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CLSD" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CLSD" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CLSD" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CLSD" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CLSD" "CX_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_CRM_CPY_PROCTYPE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPRI" "CL_ALRT_SELF_MON_LANDSCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPRI" "CL_E2EEFWK_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRI" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRI" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPRO" "CL_AC_ASSIGNMENT_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPRO" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRO" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CPUB" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPUB" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPUB" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPUB" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CPUB" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CPUB" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPUB" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPUB" "CX_E2E_DPC_SETUP" " "
2EETG010 "R3TR" "ENHO" "AGS_GET_JOB_DOC_ATTR" " "
2EETG010 "LIMU" "FUNC" "AGS_DSWP_SOLMAN_INFO" " "
2EETG010 "LIMU" "REPS" "LAGS_DSWP_REPORTING$01" " "
2EETG010 "LIMU" "FUNC" "AGS_SISE_MANU_NOTE_ACTS" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTIL$02" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTILF07" " "
2EETG010 "LIMU" "REPS" "SAPLAGS_SISE_UTIL" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_DB_UPDATER_REMOTE" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "FUNC" "SMD_DATA_LOADER_ALM" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$28" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADF01" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADU32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADV28" " "
2EETG010 "LIMU" "FUNC" "DSWP_CI_GET_OBJECTS_BY_GUID" " "
2EETG010 "LIMU" "FUNC" "DSWP_CREATE_SOLUTION" " "
2EETG010 "LIMU" "FUNC" "E2E_STAPI_EXTRACTOR_CE2_V2" " "
2EETG010 "LIMU" "REPS" "LE2E_FUNC$33" " "
2EETG010 "LIMU" "FUNC" "E2E_TWB_POST_DATA_LOADER" " "
2EETG010 "LIMU" "FUNC" "FM_UPD_DELIVERY_AFTER_IMPORT" " "
2EETG010 "LIMU" "REPS" "LAI_UPDATE_CONTENT$01" " "
2EETG010 "LIMU" "FUNC" "SMSU_CREATE_TEMP_RFC" " "
2EETG010 "LIMU" "FUNC" "SMSU_MANAGED_SYSTEM" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$03" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$04" " "
2EETG010 "LIMU" "FUNC" "SMSY_GENERATE_RFCDEST_W_USER" " "
2EETG010 "LIMU" "REPS" "LSMSY_GENERATE_RFCDEST$07" " "
2EETG010 "LIMU" "FUNC" "SOLAR_BUSINESS_CONT_DISP_ALV" " "
2EETG010 "LIMU" "REPS" "LSOLAR05$33" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_ECTC" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_TWBC" " "
2EETG010 "R3TR" "INTF" "IF_ACE_METRIC_EVENT_FILTER" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "R3TR" "INTF" "IF_AI_SC_UTIL" " "
2EETG010 "R3TR" "INTF" "IF_ATW_METRIC" " "
2EETG010 "R3TR" "INTF" "IF_E2E_EFWK_SETUP" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_CC_INCIDENT_DETAILS" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_INCIDENT_FAVOURITES" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_RBE_IMPORT" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_WORK_DVM_SCH_ANALYSIS" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_TABLE_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_UI_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_SELF_MON_OVRVIEW" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_CONFIG_WIZARD" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_ALERTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DFLT_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_HIERARCHY" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_INCIDENT" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRICS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRIC_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_MONOBJ_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_NOTIFICATION" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_REACTIONS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_RULE_TYPE" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_ALRT_MEADEF_CTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_SISE_CUSTOM_TMPL_CONF" " "
2EETG010 "LIMU" "METH" "CL_ALERT_HTML_REPORT_GENERATORCM002" " "
2EETG010 "LIMU" "REPS" "AI_BPMON_FIX" " "
2EETG010 "LIMU" "REPS" "AI_CRM_IM_UPDATE_FROM_SAP_C01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_F01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_TOP" " "
2EETG010 "LIMU" "REPS" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "REPS" "CRM_DNO_SERVICE_MONITOR" " "
2EETG010 "LIMU" "REPS" "LDSWP_BPM_FUNCF08" " "
2EETG010 "LIMU" "REPS" "RLMDB_TECH_SCEN_DUAL_STACKS" " "
2EETG010 "LIMU" "REPS" "WDAL_URD2_BUSINESS_GRAPHICS" " "
2EETG010 "LIMU" "WAPP" "BSPWD_BASICS SCRIPTS.JS" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_DELTAHANDLIN" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_KEYBOARD.JS" " "
2EETG010 "LIMU" "WDYC" "AGS_CC_INCIDENT_DETAILS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_INCIDENT_FAVOURITES COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT IMP_FLOW_CONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_WORK_DVM_SCH_ANALYSIS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS V_SCOPE_SEL" " "
2EETG010 "LIMU" "WDYC" "POWL_TABLE_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "POWL_UI_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_ALRT_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_SELF_MON_OVRVIEW COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_CONFIG_WIZARD COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_CONFIG_WIZARD MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_ALERTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_ALERTS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER METRIC_GROUP_VARIANT" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DFLT_TEMPLATE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_HIERARCHY COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_INCIDENT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_INCIDENT MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRICS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRIC_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_MONOBJ_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_MONOBJ_DETAIL MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_NOTIFICATION COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_NOTIFICATION MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_REACTIONS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_REACTIONS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_RULE_TYPE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_RULE_TYPE MAIN" " "
2EETG010 "LIMU" "WDYC" "WD_ALRT_MEADEF_CTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WD_SISE_CUSTOM_TMPL_CONF COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_DVM_AFWK_LOG_VIEWER MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_INCIDENT_FAVOURITES VWWATCHLIST" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_AS VW_AS_TREE_TABLE" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_IMPORT V_LOG_COMP_MAP" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_CHANGE_REQS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_ISSUES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_MSGS_EODS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PARENT_OBJS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PROCESS_INFO" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_SERVICES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_TASKS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT WND_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_SERVICES_ENGAGE VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_OPERATION_CENTER V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_TWB_SETUP V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AI_SERVICE_CONNECTIONS TREE_CONTROL" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER2" " "
2EETG010 "LIMU" "WDYV" "WDC_ALERT_GROUP_DETAILS EVENT_GROUP_VIEW" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_CUSTOM_AGS V_BW_SYSTEM" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_SS_GUID_PROC GENERIC_POPUP" " "
Any help to fix this issue.
Rg,
Karthik

Hello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB

Error in phase SHADOW_IMPORT_UPG2

Dear Friends,
Please help me to resolve this issue as soon as possible.I'll reward the answers with full reward points.
We are in the proces to upgrade our Solution Manager 3.2(Production
Server) to Solution Manager 4.0.
OS : Linux RHEL 4.0 & DB : Oracle 9.2
I have already done the following works :
1)Upgraded the DB from Oracle 9.2 to 10g Release 2
2)Ran the prepare phase & soved all the errors & warning indicated.
3)Now I have started Upgrade Phase & Iam geting error in phase SHADOW_IMPORT_UPG2 .
I checked log files it says
BZA=>table RSPLPPM_SS does not exist on database
I got one note 1013807 - Problems after upgrade to NW2004s - Adding table entries.
It says not to apply BW support pack 11,12 & 13(i.e. (SAPKW70011,SAPKW70012 & SAPKW70013) as the highest support pack.Either keep SAPKW70010 or SAPKW70014 as the Highest Support pack for SAP_BW.
I knew this thing but by mistake it got applied automatically eventhough I didn't select it.
Thats Why Iam getting error :
BZA=>table RSPLPPM_SS does not exist on database
So Please help me to resolve this issue as soon as possible because this project has already delayed & it very urgent too.
Thanks & Regards,
Sunil Maurya
Basis Administrator
Enteg Infotech Pvt.Ltd.

Dear Friends,
Please help me to resolve this issue as soon as possible.I'll reward the answers with full reward points.
We are in the proces to upgrade our Solution Manager 3.2(Production
Server) to Solution Manager 4.0.
OS : Linux RHEL 4.0 & DB : Oracle 9.2
I have already done the following works :
1)Upgraded the DB from Oracle 9.2 to 10g Release 2
2)Ran the prepare phase & soved all the errors & warning indicated.
3)Now I have started Upgrade Phase & Iam geting error in phase SHADOW_IMPORT_UPG2 .
I checked log files it says
BZA=>table RSPLPPM_SS does not exist on database
I got one note 1013807 - Problems after upgrade to NW2004s - Adding table entries.
It says not to apply BW support pack 11,12 & 13(i.e. (SAPKW70011,SAPKW70012 & SAPKW70013) as the highest support pack.Either keep SAPKW70010 or SAPKW70014 as the Highest Support pack for SAP_BW.
I knew this thing but by mistake it got applied automatically eventhough I didn't select it.
Thats Why Iam getting error :
BZA=>table RSPLPPM_SS does not exist on database
So Please help me to resolve this issue as soon as possible because this project has already delayed & it very urgent too.
Thanks & Regards,
Sunil Maurya
Basis Administrator
Enteg Infotech Pvt.Ltd.

Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

Similar Messages

Maybe you are looking for