Upgrade to ES2 Failing while bootstrapping
We are seeing this issue when we want to upgrade from ES(8.2.1) to ES2 - OutofPlace upgrade.
DB is been refreshed from ES and migrated to 11gr2, when initiated DB, its failing at 50% with below error.
Techstack: ES2/WAS7.0.0.17/Oracle 11gr2/AIX 6.1.
[2012-10-29 14:47:57,971], INFO, Thread-114, com.adobe.livecycle.bootstrap.client.BootstrapRequestClient, Invoking [http://host.net:37620/adobe-bootstrapper/bootstrap?responseType=client&bootstrapper=DSC&st ep=bootstrap&host=host.net&port=37620&responseLocale=en]
[2012-10-29 14:48:00,718], SEVERE, Thread-114, com.adobe.livecycle.bootstrap.client.BootstrapRequestClient, com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-011-031: Bootstrapping failed for platform component [DocumentServiceContainer]. The wrapped exception's message reads:
See nested exception; nested exception is: com.ibm.ejs.container.UnknownLocalException: nested exception is: com.adobe.pof.POFRuntimeException: sequence: sc_work_ref_id already exists.
at com.adobe.livecycle.bootstrap.bootstrappers.DSCBootstrapper.bootstrap(DSCBootstrapper.jav a:73)
at com.adobe.livecycle.bootstrap.framework.ManualBootstrapInvoker.invoke(ManualBootstrapInvo ker.java:78)
at com.adobe.livecycle.bootstrap.framework.BootstrapServlet.doGet(BootstrapServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:718)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1657)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:939)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:502)
at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java: 179)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:91)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:864)
at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186)
at com.ibm.ws.ard.channel.ARDChannelConnLink.handleDiscrimination(ARDChannelConnLink.java:18 8)
at com.ibm.ws.ard.channel.ARDChannelConnLink.ready(ARDChannelConnLink.java:93)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:452)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.jav a:511)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java: 305)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.jav a:83)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:165)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)
Caused by: javax.ejb.EJBException: See nested exception; nested exception is: com.ibm.ejs.container.UnknownLocalException: nested exception is: com.adobe.pof.POFRuntimeException: sequence: sc_work_ref_id already exists.
at com.adobe.pof.odapi.POFSchemaManagerImpl.synchronizeAll(POFSchemaManagerImpl.java:1127)
at com.adobe.pof.odapi.POFSchemaManagerRemoteBean.synchronizeAll(POFSchemaManagerRemoteBean. java:511)
at com.adobe.pof.odapi.EJSLocalStatelessadobe_POFSchemaManagerLocalEJB_626825cc.synchronizeA ll(Unknown Source)
at com.adobe.pof.odapi.POFSchemaManagerLocalEJBAdapter.synchronizeAll(POFSchemaManagerLocalE JBAdapter.java:135)
at com.adobe.idp.dsc.initializer.DSCInitializerBean.installSchema(DSCInitializerBean.java:20 1)
at com.adobe.idp.dsc.initializer.DSCInitializerBean.bootstrap(DSCInitializerBean.java:94)
at com.adobe.idp.dsc.initializer.EJSLocalStatelessDSCInitializerBeanLocalEJB_7bb34e85.bootst rap(Unknown Source)
at com.adobe.livecycle.bootstrap.bootstrappers.DSCBootstrapper.bootstrap(DSCBootstrapper.jav a:68)
... 26 more
Caused by: com.ibm.ejs.container.UnknownLocalException: nested exception is: com.adobe.pof.POFRuntimeException: sequence: sc_work_ref_id already exists.
... 34 more
[2012-10-29 14:48:00,720], INFO, Thread-114, com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask, Completing task: com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask@30a330a3 isDone:true
[2012-10-29 14:48:00,720], SEVERE, Thread-114, com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask, Task failed
com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-103-000: Bootstrapping request failed on server. Message from server:
ALC-TTN-011-031: Bootstrapping failed for platform component [DocumentServiceContainer]. The wrapped exception's message
reads:
See nested exception; nested exception is: com.ibm.ejs.container.UnknownLocalException: nested exception is: com.adobe.pof.POFRuntimeException:
sequence: sc_work_ref_id already exists.
Check application server logs for details.
at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.analyzeResponse(BootstrapRequ estClient.java:152)
at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.bootstrap(BootstrapRequestCli ent.java:63)
at com.adobe.livecycle.bootstrap.client.BootstrapManager.executeStep(BootstrapManager.java:2 03)
at com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask$ActualTask.<init>(BootstrapTask.j ava:125)
at com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask$1.construct(BootstrapTask.java:58 )
at com.adobe.livecycle.lcm.core.tasks.SwingWorker$2.run(SwingWorker.java:114)
at java.lang.Thread.run(Thread.java:736)
[2012-10-29 14:48:08,937], SEVERE, AWT-EventQueue-0, com.adobe.livecycle.lcm.feature.bootstrap.BootstrapDialog, Bootstrap exception
com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-103-000: Bootstrapping request failed on server. Message from server:
ALC-TTN-011-031: Bootstrapping failed for platform component [DocumentServiceContainer]. The wrapped exception's message
reads:
See nested exception; nested exception is: com.ibm.ejs.container.UnknownLocalException: nested exception is: com.adobe.pof.POFRuntimeException:
sequence: sc_work_ref_id already exists.
Check application server logs for details.
at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.analyzeResponse(BootstrapRequ estClient.java:152)
at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.bootstrap(BootstrapRequestCli ent.java:63)
at com.adobe.livecycle.bootstrap.client.BootstrapManager.executeStep(BootstrapManager.java:2 03)
at com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask$ActualTask.<init>(BootstrapTask.j ava:125)
at com.adobe.livecycle.lcm.feature.bootstrap.BootstrapTask$1.construct(BootstrapTask.java:58 )
at com.adobe.livecycle.lcm.core.tasks.SwingWorker$2.run(SwingWorker.java:114)
at java.lang.Thread.run(Thread.java:736)
Hi,
i have a similar error. It is not the sequence sc_work_ref_id which is missing, but the session_id.
Did you solve your problem? Do you know why this happened?
Thanks and best regards,
Constantin
Similar Messages
-
y iPad2 is frozen, I am trying to download the upgrade software but fails after a while, how can I solve the issue. I have not upgraded the iPad 2 since I bought it.
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
How do I upgrade from ES2 to ES4?
I have a functioning ES2 development environment that I want to upgrade to ES4. I am also moving to a new server (Windows 2008 R2 and SQL 2008 R2).
Currently, I'm running:
JBoss [EAP] 4.2.0.GA_CP01
MS SQL 2005
Java 1.6.0-14
I've read some docs, but am still confused. I'm assuming out-of-place upgrade, but should I try to Upgrade from ES2 or just do a fresh install then copy GDS and database over? Also, what configuration files can I copy over (if any)?
Any recommendations or links would be appreciated.
Thanks in advance.So far, no good:
I'm getting:
2013-05-13 16:18:24,283 ERROR [com.adobe.service.DataManagerService] (main) ALC-BMC-001-001: Unexpected exception while obtaining home interfaces
javax.naming.NameNotFoundException: com not bound
at org.jnp.server.NamingServer.getBinding(NamingServer.java:771)
at org.jnp.server.NamingServer.getBinding(NamingServer.java:779)
at org.jnp.server.NamingServer.getObject(NamingServer.java:785)
at org.jnp.server.NamingServer.lookup(NamingServer.java:396)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:726)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:686)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at com.adobe.service.DataManagerService.onStartService1(DataManagerService.java:117)
at com.adobe.service.DataManagerService.onStartService(DataManagerService.java:81)
at com.adobe.service.Service.start(Service.java:145)
at com.adobe.service.Service.initialize(Service.java:479)
at com.adobe.service.ServerLifeCycleListener.contextInitialized(ServerLifeCycleListener.java :31)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3910)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4393)
at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeployInternal(TomcatDeplo yment.java:310)
at org.jboss.web.tomcat.service.deployers.TomcatDeployment.performDeploy(TomcatDeployment.ja va:142)
at org.jboss.web.deployers.AbstractWarDeployment.start(AbstractWarDeployment.java:461)
at org.jboss.web.deployers.WebModule.startModule(WebModule.java:118)
at org.jboss.web.deployers.WebModule.start(WebModule.java:97)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:157)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:96)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:88)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:668)
at org.jboss.system.microcontainer.ServiceProxy.invoke(ServiceProxy.java:206)
at $Proxy38.start(Unknown Source)
at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycle Action.java:42)
at org.jboss.system.microcontainer.StartStopLifecycleAction.installAction(StartStopLifecycle Action.java:37)
at org.jboss.dependency.plugins.action.SimpleControllerContextAction.simpleInstallAction(Sim pleControllerContextAction.java:62)
at org.jboss.dependency.plugins.action.AccessControllerContextAction.install(AccessControlle rContextAction.java:71)
at org.jboss.dependency.plugins.AbstractControllerContextActions.install(AbstractControllerC ontextActions.java:51)
at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext. java:348)
at org.jboss.system.microcontainer.ServiceControllerContext.install(ServiceControllerContext .java:286)
at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631)
at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:93 4)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1 082)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:9 84)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553)
at org.jboss.system.ServiceController.doChange(ServiceController.java:688)
at org.jboss.system.ServiceController.start(ServiceController.java:460)
at org.jboss.system.deployers.ServiceDeployer.start(ServiceDeployer.java:163)
at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:99)
at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:46)
at org.jboss.deployers.spi.deployer.helpers.AbstractSimpleRealDeployer.internalDeploy(Abstra ctSimpleRealDeployer.java:62)
at org.jboss.deployers.spi.deployer.helpers.AbstractRealDeployer.deploy(AbstractRealDeployer .java:50)
at org.jboss.deployers.plugins.deployers.DeployerWrapper.deploy(DeployerWrapper.java:171)
at org.jboss.deployers.plugins.deployers.DeployersImpl.doDeploy(DeployersImpl.java:1439)
at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.ja va:1157)
at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.ja va:1178)
at org.jboss.deployers.plugins.deployers.DeployersImpl.doInstallParentFirst(DeployersImpl.ja va:1210)
at org.jboss.deployers.plugins.deployers.DeployersImpl.install(DeployersImpl.java:1098)
at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext. java:348)
at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631)
at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:93 4)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1 082)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:9 84)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553)
at org.jboss.deployers.plugins.deployers.DeployersImpl.process(DeployersImpl.java:781)
at org.jboss.deployers.plugins.main.MainDeployerImpl.process(MainDeployerImpl.java:702)
at org.jboss.system.server.profileservice.repository.MainDeployerAdapter.process(MainDeploye rAdapter.java:117)
at org.jboss.system.server.profileservice.repository.ProfileDeployAction.install(ProfileDepl oyAction.java:70)
at org.jboss.system.server.profileservice.repository.AbstractProfileAction.install(AbstractP rofileAction.java:53)
at org.jboss.system.server.profileservice.repository.AbstractProfileService.install(Abstract ProfileService.java:361)
at org.jboss.dependency.plugins.AbstractControllerContext.install(AbstractControllerContext. java:348)
at org.jboss.dependency.plugins.AbstractController.install(AbstractController.java:1631)
at org.jboss.dependency.plugins.AbstractController.incrementState(AbstractController.java:93 4)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:1 082)
at org.jboss.dependency.plugins.AbstractController.resolveContexts(AbstractController.java:9 84)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:822)
at org.jboss.dependency.plugins.AbstractController.change(AbstractController.java:553)
at org.jboss.system.server.profileservice.repository.AbstractProfileService.activateProfile( AbstractProfileService.java:306)
at org.jboss.system.server.profileservice.ProfileServiceBootstrap.start(ProfileServiceBootst rap.java:271)
at org.jboss.bootstrap.AbstractServerImpl.start(AbstractServerImpl.java:461)
at org.jboss.Main.boot(Main.java:221)
at org.jboss.Main$1.run(Main.java:556)
at java.lang.Thread.run(Thread.java:662)
2013-05-13 16:18:24,294 WARN [com.adobe.csa.config.CoreConfigManager] (main) Could not obtain Core Preferences
2013-05-13 16:18:24,294 ERROR [com.adobe.idp.config.AdobePreferenceFactory] (Thread-19) UserM:GENERIC_ERROR: [Thread Hashcode: 1946166549] Problem with system rootjavax.naming.NameNotFoundException: com.adobe.idp.config.PreferencesSPIHome not bound
to start with, and a few more, but I think they are related.
Is there a JNDI definition for COM and ADOBE??
Thanks -
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2.
Below is the the log details:
2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log
ContextInit ContextInit 0 0 2012-11-08 03:23:46 Message Facility failed to init. Siebel Root: C:\DAC\client\utilities
Trace Trace 3 0 2012-11-08 03:23:46 Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Trace Trace 3 0 2012-11-08 03:23:46 Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
Trace Trace 3 0 2012-11-08 03:23:46
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 ddlimp /U SIEBEL /P ***** /C siebel /G SSE_ROLE /F C:\OBIA\Upgrade\CTLFiles\DDL_OLTP.CTL /L C:\OBIA\Upgrade\CTLFiles\DDL_
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 Connecting to the database...
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State , 40042692, CLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Connected.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading tables and indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Read 522 tables and 1084 indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading existing schema...
SARMLog SARMInformation 3 0 2012-11-08 03:23:52 SARM is OFF -change param SARMLevel to enable
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Read 0 tablespaces, 6137 tables and 24846 indexes from existing schema...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Running SQL statements against the database...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Merging table S_ETL_COSTLST ...
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 37000: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 56098: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 alter table S_ETL_COSTLST modify
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 CONFLICT_ID default '0'
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 ;
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLDbDdlColModify).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in MainFunction (UTLDbDdlDbMerge).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in Main function...
GenericLog GenericError 1 0 2012-11-08 03:25:56 (logapi.cpp (167) err=1 sys=126) SBL-GEN-00001: (logapi.cpp: 167) error code = 1, system error = 126, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)If you run DAC on a 64-bit windows Operating System, you must create the ODBC data source using the ODBC Administrator tool in %windir%\SysWOW64\odbcad32.exe. for creating the data warehouse tables.
If helps pls mark -
(App-store) Compilation failed while executing : compile-abc
I just upgraded to AIR16 and can no longer compile for the ios app store from Windows 7.
Calling "adt -package -target ipa-test ..." with AIR16 works correctly, installs and runs on my device.
Calling "adt -package -target ipa-app-store ..." with AIR16 crashes the compiler with this generic error:
Compilation failed while executing : compile-abc
Calling "adt -package -target ipa-app-store ..." with AIR14 (and the new compiler, not legacy) works correctly.
How do I get more information about what is happening? I have no ANEs. Could this have something to do with the new 64-bit requirements? My version of Java? With provisioning profiles? What else is different between test and app-store compile modes?Update: I tried a half dozen different ways to compile with AIR16 to no joy. Test works fine, App Store compile fails.
Then finally tried the current AIR17 beta which DOES work. I don't see anything in the release notes about fixing ios app-store compile issues, though there's a new known ios-related bug with textfields.
Does ADT produce an error log file somewhere? I'd like to get more info about this "Compilation failed while executing : compile-abc" error if I ever run into it again. -
R3load -testconnect fails while doing the Export Prepare
Hi All,
R3load -testconnect fails while doing the Export Prepare for the Unicode Conversion. I have upgraded the CRM system from CRM 4.0 to SAP Netweaver 7.0 with EHP1. Now I doing the Unicode Conversion. While using the sapinst as root to start the unicode conversion I am getting the following error:
/usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/CSX/SYS/exe/run/R3load: START OF LOG: 20090603143131
/usr/sap/CSX/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/CSX/SYS/exe/run/R3load: version R7.01/V1.4
Compiled Mar 10 2009 23:03:11
/usr/sap/CSX/SYS/exe/run/R3load -testconnect [E]
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
/usr/sap/CSX/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/CSX/SYS/exe/run/R3load: END OF LOG: 20090603143131
Regards
Karthik RavooriHi,
These note May help you.
where are you placing the New executables.Always use /sapmnt/SID/exe.If you are placing them in /usr/sap/CSX/SYS/exe/run/ then you always get the error.
I found in one of the note the same error that you are getting.
Search in note with text DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
Note 459899 - SAP BW 3.0A Server Installation: UNIX/Oracle
This Note Talks about the verson you should have for the kernel
Note 898181 - Corrupt cluster record creates signal 11
Thanks
Rishi Abrol -
AIR 3.8, iOS Packaging Failed: "Compilation failed while executing : ld64"
Since upgrading to AIR 3.8, we can no longer package our AIR Application.
We are getting the following error:
internal_package-ios:
[exec] ld: -pie can only be used when targeting iOS 4.2 or later
[exec] Compilation failed while executing : ld64
Screenshot Here: http://cl.ly/image/3h2U1g271n1J
Reverting to AIR 3.7 fixes the issue... but we need 3.8 as we need the 4096 texture support that comes with BASELINE_EXTENDED profile.
From googling, this seems like it's related to the iOS SDK included with AIR, but the issue was fixed in AIR 3.7. Seems it has been regressed...Hi Shawn,
Since AIR 3.8, we support only PIE enabled binaries, as per Apple recommendation.
For this, the minimum supported iOS version is 4.2. The ANE you are using specifies a minimum iOS version of 4.0 in its platform-iphone.xml, present at: https://github.com/alebianco/ANE-Google-Analytics/blob/master/build/platform-iphone.xml
You will need to change the line:
<option>-ios_version_min 4.0</option>
to:
<option>-ios_version_min 4.2</option>
and rebuild the ANE to make it work.
Regards,
Neha -
SQL Server Import Export Wizard fails while trying to retrieve the data from FastObjects Database
When trying to import data from FastObjects database to SQL Server 2008 R2 using import/ export wizard we get the following error message :
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
Clicked on View button, the source data is retrieved correctly.
Clicked on Edit Mapping button, the Import Export Wizard failed with the below error message:
===================================
Column information for the source and destination data could not be retrieved.
"Test" -> [dbo].[Test]:
- Cannot find column -1.
(SQL Server Import and Export Wizard)
===================================
Cannot find column -1. (System.Data)
at System.Data.DataColumnCollection.get_Item(Int32 index) at System.Data.DataRow.get_Item(Int32 columnIndex) at Microsoft.DataTransformationServices.Controls.ProviderInfos.MetadataLoader.LoadColumnsFromTable(IDbConnection myConnection, String[] strRestrictions)
at Microsoft.SqlServer.Dts.DtsWizard.OLEDBHelpers.LoadColumnsFromTable(MetadataLoader metadataLoader, IDbConnection myConnection, String[] strRestrictions, DataSourceInfo dsi)at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfoFromDB(IDbConnection
mySourceConnection) at Microsoft.SqlServer.Dts.DtsWizard.TransformInfo.PopulateDbSourceColumnInfo(IDbConnection mySourceConnection, ColumnInfoCollection& sourceColInfos)Hi Chennie,
Thank you for the post.
Does the issue persists after you use the "Write a query to specify the data to transfer" option instead of “Copy data from one or more tables or views” option? If so, the issue may occur due to incorrect data type matching between the FastObjects database
data types and SSIS data types. In this condition, I don’t think it is necessary to upgrade the SQL Server version. Since you can open the Column Mappings dialog box, please try to modify the data type mapping manually.
In addition, the issue seems to be the same as the issue described in the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/09/09/sql-server-import-export-wizard-fails-while-trying-to-retrieve-the-data-from-pervasive-database.aspx
Regards,
Mike Yin
TechNet Community Support -
Running Windows 8.1 PRO RTM x64 upgraded from Win 8 PRO. Updates to 8.1 as of 17 October installed
Event viewer still shows newly triggered Error(s) CAPI2 event id 513.
I can trigger this error by manually creating a restore point invoking VSS.
The VSS System Writer is listed and is error free.
Log Name: Application
Source: Microsoft-Windows-CAPI2
Date: 17/10/2013 20:32:19
Event ID: 513
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Machine -Name
Description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2013-10-17T19:32:19.935384000Z" />
<EventRecordID>89898</EventRecordID>
<Correlation />
<Execution ProcessID="1404" ThreadID="2104" />
<Channel>Application</Channel>
<Computer>Machine-Name</Computer>
<Security />
</System>
<EventData>
<Data>
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
</Data>
</EventData>
</Event>Thank you excellent post! I confirmed this fix worked for my situation as well. Below is more detailed post since it did not jump out for me the first time.
############################ Details ##############################
My operating system is Windows 8.1 after installing Visual Studio 2013 when Symantec System recover 2013 ran started seeing
the following errors in event logs.
################## Example event log errors #######################
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
AddLegacyDriverFiles: Unable to back up image of binary Microsoft Link-Layer Discovery Protocol.
System Error:
Access is denied.
################## Example event log errors #######################
Note: Confirmed this fix resolved my issue.
Step 1. Download and unzip accesschk.exe to C:\Temp http://download.sysinternals.com/files/AccessChk.zip
Step 2. Run cmd.exe prompt as Administrator go to Temp directory
C:\>cd Temp
Step 3. Run accesschk.exe
C:\Temp>accesschk.exe -c mslldp
################# Example output 1 #################################
Accesschk v5.10 - Reports effective permissions for securable objects
Copyright (C) 2006-2012 Mark Russinovich
Sysinternals - www.sysinternals.com
mslldp
RW NT AUTHORITY\SYSTEM
RW BUILTIN\Administrators
RW S-1-5-32-549
R NT SERVICE\NlaSvc
################# Example output 1 #################################
Step 4. Run following command.
C:\Temp>SC sdshow MSLLDP <---- Example text 1.
################# Example output 2 #################################
D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1
-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
################# Example output 2 #################################
Step 5. Run following command.
C:\Temp>SC sdshow MUP
################# Example output 3 #################################
D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;IU)
(A;;CCLCSWLOCRRC;;;SU) ######## <--- Example text 2. Grab this value. #######
S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
################# Example output 3 #################################
Step 6.
C:\Temp>
### Copy and past Example 1. line in notepad in command promt you can select all then copy the paste the text into notepad.
MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)
(A;;CCLCSWLOCRRC;;;SU) ######## <--- Insert Example text 2. here #######
S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
Run this command. (Note: Make sure its all one line no wordwrap that the webpage could be showing this text.)
C:\Temp> sc sdset MSLLDP D:(D;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BG)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SY)(A;;CCDCLCSWRPDTLOCRSDRCWDWO;;;BA)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;SO)(A;;LCRPWP;;;S-1-5-80-3141615172-2057878085-1754447212-2405740020-3916490453)(A;;CCLCSWLOCRRC;;;SU)S:(AU;FA;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;WD)
Step 7.
##### Check the result #####
C:\Temp>accesschk.exe -c mslldp
################# Example output 4 #################################
Accesschk v5.10 - Reports effective permissions for securable objects
Copyright (C) 2006-2012 Mark Russinovich
Sysinternals - www.sysinternals.com
mslldp
RW NT AUTHORITY\SYSTEM
RW BUILTIN\Administrators
RW S-1-5-32-549
R NT SERVICE\NlaSvc
R NT AUTHORITY\SERVICE <--- You should now see this line.
################# Example output 4 #################################
Step 8.
Ran backup using Symantect System Recovery 2013 the event errors did not return after this fix. Great post again!
############################ Details ############################## -
I am getting the following error when running Disk Utility (under ML) on an exteral USB hard drive:
Error: Partition map repair failed while adjusting structures to fit current whole disk size.
I get thsi when I ask Disk Utility to "Repair Disk" at the top level of the disk hierarchy (i.e. not on one of the partitions within the disk but on the disk itself). I was not getting this error with Lion on the same disk before I upgraded from Lion to ML.
It seems like a bug in ML. I found websites where they suggest that you just run Lion's Disk Utility and it will show the disk to be fine.
Any thoughts?So, I finally seemed to have resolved things with the Seagate 4TB Firewire external drive. If you Google about, you will find a thread on Seagate's own support forum that describes how to disable the sleep function on the drive. You CANNOT ALLOW THE DRIVE TO SLEEP WHILE CONNECTED TO YOUR MAC.
After a lot of reading, here's what I think is happening: the drive goes to sleep, after some period of inactivity, and when you shutdown your Mac, OS X tries to write something to the drive as part of the dismount / disconnect / shutdown process. That fails in some manner, leaving the drive 'corrupted' at the filesystem or partition level.
Then, on the next boot-up, Mountain Lion tells you that it cannot repair the drive and it mounts as read only. Your only fix at that point is to re-partition / re-format and start over (which is big fun with 3TB of data to copy back on to the drive).
If you prevent the drive from sleeping, whenever it's connected to the MacBook, then the above process doesn't occur and voila, the drive just works. So far, I haven't had any problems with about a week of starting / shutting down my MacBook connected to the offending drive (translation: I was going to return the drive, but the problem is clearly with Mac OS X Mountain Lion). -
Data load failed while loading data from one DSO to another DSO..
Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
SnehaHi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR -
MailServiceHelper Failed while sending email java.lang.NullPointerException
Hi guys,
I am trying to send email with Adobe CQ API.
But i am getting a nullpointer exception at this line: MsgGateway.send(htmlEmail);
This is my method that i am using to send.
import com.day.cq.mailer.MessageGateway;
import com.day.cq.mailer.MessageGatewayService;
import javax.mail.internet.InternetAddress;
public boolean sendHtmlEmail(SlingHttpServletRequest sling,
String fromMailAdress, List<String> recepientmailAddress,
String emailSubject, String htmlbodyMail) {
HtmlEmail htmlEmail = new HtmlEmail();
List<InternetAddress> emailAddress = new ArrayList<InternetAddress>();
try {
for (String recipient : recepientmailAddress) {
if (!StringUtil.isEmpty(recipient)) {
emailAddress.add(new InternetAddress(recipient));
log.error(recipient);
if (!StringUtil.isEmpty(fromMailAdress)) {
htmlEmail.setFrom(fromMailAdress);
htmlEmail.setTo(emailAddress);
htmlEmail.setSubject(emailSubject);
htmlEmail.setHtmlMsg(htmlbodyMail);
htmlEmail.setCharset("utf-8");
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
MsgGateway.send(htmlEmail); //nullpointer exception caught here
return true;
} catch (Exception e) {
log.error("Failed while sending email", e);
return false;
I have checked to ensure the bundle com.day.cq.cq-mail and my own bundle is running .
I am also sure that 'htmlEmail' is not null by retrieving the email subject via .getSubject and it did return me the subject.
I do not understand what is returning the nullpointerexception.
Thanks in advance !The MessageGateway instance (MessageGateway<HtmlEmail> MsgGateway) is null therby throwing a null pointer.
Instead of instanciating msgGateway as :
MessageGatewayService MsgService = getMessageGateWayService(sling);
MessageGateway<HtmlEmail> MsgGateway = MsgService.getGateway(HtmlEmail.class);
Inject your MessageGateway as:
@Reference
private MessageGateway<HtmlEmail> msgGateway;
and then call send on msgGateway as msgGateway.send(htmlEmail)
~ Aditya -
Application express installation is failed while running apxdevrm.sql scrip
Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PMHello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan -
Process chain failing while executing DTP
Hi All,
My process chain is failing while executing DTP.
Error i got is: OBJECTS_OBJREF_NOT_ASSIGNED
Access not possible using 'NULL' object reference.
The dump is occuring in method : GET_FIELD_LIST_INBOUND
TRY.
CALL METHOD cl_rstran_model=>factory
EXPORTING
i_tranid = i_tranid
RECEIVING
r_r_model = l_r_model.
CATCH cx_rstran_exception.
RAISE EXCEPTION TYPE cx_rs_step_failed
ENDTRY.
From SDN , i am quite sure that its a SAP problem and needs to apply some Note.
Could anyone please tell me, which note i should apply ?
Thanks.Hi,
check the note note 1081884 it may help you ..
check link ..
/message/2817339#2817339 [original link is broken]
Reagrds,
Shikha
Edited by: Shikha Goel on Oct 10, 2008 6:21 AM -
Failed while creating virtual Ethernet switch. Failed to connect Ethernet switch port
Hello Folks
I am completely stuck with the configuration of my virtual networks. I have one logical switch left to add to one of my Hyper-V 2012 R2 hosts when I started getting the error below when I try to add logical switches to either Hyper-V Host. I have been using
the document. 'Hybrid Cloud with NVGRE (Cloud OS)' to implement the virtual networking. Basically using the exact configuration that is in the document. I have added the PA Logical Network and the Network adapters and added the logical switch for it to my
hyper-v 2012 R2 host and everything was fine. I am now trying to add my ISCSI Logical Switch to the host and this is the error I get. My other Hyper-V host I get this error for any logical switch I am trying to add. Can someone help me with this error. I haven't
been able to find any information about it.
Also a some quick info on tracing an error like this so I can figure out what is causing it.
Thsi is my configuration so far
So as far as I know everything is peachy untill the error below. Dead stop now
Error (12700)
VMM cannot complete the host operation on the 08-NY-VHOST01.accounts.ccac-ont.ca server because of the error: Failed while creating virtual Ethernet switch.
Failed to connect Ethernet switch port (switch name = '******', port name = '88C16766-ED02-4AC0-8CD7-660AC9D424DD', adapter GUID = '{FAF431D8-0124-4E40-BB3B-9234BAA02973}'): The system cannot find the file specified. (0x80070002).
Unknown error (0x800b)
Thank you for your time
Christopher
Christopher Scannellnotice your GUID? you may want to consider ensuring that is the same GUID associated in your database. Sometimes during data corruption theres a smidge of a chance your sql database kind of either pulls old guids esp if this was reverted to snapshot
without it being powered off etc.
I would try that first. then i would consider if you get to configure that with your current liscense associated with the host. I would need way more info to help any further
Maybe you are looking for
-
Look at your iphoto 'page'. On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', 'last 12 months', 'anniversary' etc etc. Now visualize the 'page' but WITHOUT the margin and the
-
My Apple TV is not showing any of my rentals at all. Even the category is missing completely. I have reset several times yo no avail! Anyone know what to do?
-
I was loading a big file of photos from iPhoto to Adobe Photoshop CS3 and more then midway it keep collapsing, yet each time I re-open photoshop to load a small amount of photos, it load the previous photos again, and again it collapse. is there a wa
-
I recently updated my yahoo account to the new yahoo7. I now can't see my contacts in my yahoo7 contacts list, but if I open my yahoo7 account using internet explorer I can see them. I have tried updating to the new firefox 5, checking the page style
-
I am very unhappy right now because I chose "create online PDF" from my ADOBE READER software on my computer and it took me to a place where I could pay. It said $9.95 only for me to pay and still can't create a PDF online.