Upgrade to FCS 3 CONFUSION!

Just bought the FCS 3 upgrade. Will be installing on a 17" Macbook Pro. Apple Store told me I have to install my current version 1 of FCS first before I can do the upgrade. But FCS 1 is also an upgrade, so how far do I have to track backwards in this installation process? The only full version I have is FCP 2 and I've been upgrading since then.
Thanks!

There is no need to install any previous version.
When you install the upgrade, the installer will prompt you for the upgrade serial number and then the serial number of the version you upgraded from
That's all you need.

Similar Messages

Upgrade to FCS 3 - Un-install previous or not?

Intel iMac 3.06GHz
Hello everyone...
When upgrading from FCS 2 to FCS 3, is it ok to try upgrading from the current set-up, or is it advised to un-install the current version first?
A clone of the system already exists, so were safe. But I'm not sure which is the best way to do it.
Also, the current scratch disk is an external drive. If we upgrade, will Final Cut create new folders on there, or will it recognise the existing ones?
Lastly, if all the extra content from FCS 2 is already installed, will it recognise that and just update what is new?
Thank you very much!

The normal method is to upgrade over the existing setup. This will preserve settings (including scratch disk locations), but even if the odd one isn't preserved, you can reset easily in FC preferences.
The upgrade will replace existing applications with the newer versions, except for LiveType which isn't in FCS3. Your existing LiveType will be left alone (whereas, of course, if you remove FCS2 first, it'll be gone). It's your call whether that's an issue. The functionality of Livetype has been moved into Motion, so it isn't lost, but if you use it a lot, you'll probably want to keep it.
The content should be replaced too, but I have seen one case where it wasn't. I have my content on an external drive (you can customize during the install, so the disk space isn't an issue for me.

Hi I buying a secondhand I mac 2007 snow leopard 10.6.3 will I be able to upgrade this ? Confused as need to this

Hi I buying a secondhand I mac 2007 snow leopard 10.6.3 will I be able to upgrade this ? Confused as new to this thanks

You should certainly update it to 10.6.8 via software update. As for for upgrading, it depends on what Mac it is.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Upgrade Issues FCS 5.1.4 to FCS 6

Having a problem upgrading my 5.1.4 FCS to FCS 6x. I am running FCS 6x on my G5 with no issues. Recently got a Macbook Pro and wanted to install FCS6 on it as well. I have my one and only full purchase original of FCP 3.0 with Ser No. Installed it no problems. Wouldn't run, but successful install. Then I installed my Upgrade to FCP4 with SerNo. No problems. Then installed my Upgrade to Final Cut Studio with SerNo. This got me to FCP 5.1 and then with some software updates from apple, upgraded it to 5.1.4. App runs without problem. This is where I am stuck at. I am attempting to install FCS 2 Upgrade with SerNo, which I assume with get me to FCP6.0 and realize there are multiple updates after that. When i insert the DVD it show it will install FCP6, Color, Motion 3, Soundtrack Pro 2, Compressor 3 and DVD Studio Pro 4. I accept the Software License and select destination as my main drive. I select NO for Distributed Processing and when the Selection Screen comes up, Final Cut Pro is deselected with an action of Skip. Cursor over the items states NEWER ALREADY INSTALLED. The same for Compressor and Apple Qmaster. Why can't Upgrade Final Cut Pro by not being able to select that box.
Thx in advance

Well I found the problem incase anyone has the same issue. What I didn't realize was related in anyway was that I installed Logic Pro 9 earlier before attempting the FCP install. Found a thread that explained that the FCP installer sees that and wont install FCP, soultion was to remove the ProMediaIO.pkg from the library/receipts folder. Worked like a champ
thx

Crashes when upgrading to FCS 5.1

I have been trying for a week to upgrade to Final Cut Studio 5.1 which I purchased for $700. I have been running FCP 3 for a while with no problems.I wiped my drives clean and tried to install the FCS, giving the key when prompted for the original FCP program I had been using...the thing will install the new FCP DVD, but trying to install any of the other elements just crashes the G5 totally...hardware system meets all specs for installation.... what could be the problem? Do I have to put the original FCP 3 back on the system before trying to install the upgrade..???The dealer in NY said no, but this is just not working...any help appreciated.

Thanks David..the computer is actually at my brother`s studio., hence the delay in replying, but it is a dual processor G5 surpassing the minimum specs as outlined in Apples webpage on FCS 5.1...we feel that the problem may be that the original FCP2 program was on OS9, the G5 was then upgraded to OSX and FCP3 upgrade was installed and running well.Perhaps Wiping the drives clean before trying to install the new FCS Upgrade might be the problem?..It has now installed FCP from the FCS set, but crashes when trying to install the other elements. Still working at it, but its quite a mystery. My brother has been with Apples for ten + years, is a skilled editor with Avid and FCP....and just cant understand why a legally purchased upgrade on a well equipped apple will just not install, and crashes the system.

Final Cut Studio Academic Upgrade to FCS 2??

So, I just recently bought the Final Cut Studio 5.1 set, but seeing as how I'm a broke college kid, I bought the academic. Can I still upgrade to Final Cut Studio 2? Do I just buy the 499 upgrade? Just a little curious. Thanks in advance

Sadly you cannot. However, if you are a college student, you can always acquire the full academic FCS2 for the academic price. If you check the Apple website (store) it's quite clear on these issues, both when you buy and when you try to upgrade.
It's actually less expensive in the long term to buy a full version and then upgrade. That is, if you're planning on staying with the FCS ship for some time.

Best upgrade method (FCS - FCPX)?

I am currently running the latest Final Cut Studio, but now want to upgrade to Final Cut Pro X (+ Motion + Compressor). Questions:
How smooth is the upgrade process? Anyone encountering issues with installing right over FCS (relating to bugs, performance issues, driver conflicts, etc)? Or would I be better off by uninstalling the existing Final Cut Studio and then installing the latest versions of the individual apps? Thoughts and experiences most welcome!!!!
Thanks.

Yes, I've been reading about the problems with FCPX elsewhere, mainly about some basic functionality that's missing like EDL import. But not being able to read an existing FCP project is a surprise. I guess despite the nifty new features and true 64-bit support, I'll table this purchase until they bring it up to par.

Upgrade to FCS 2 won't take old serial number

So I bought a FCS2 upgrade. It installed perfectly on my Mac Pro. But on my laptop, I had an educational version of FCP 5 which I know can't be upgraded. Apple said to enter my old FCP 4.5
serial #. But I still get the INVALID Serial # message. I've tried other 4.5 #s, and still no go. Any thoughts?

The Software License Agreement for FCS2 allows you to install the same license of FCS2 on one desktop and one laptop, as long as the two are never in use at the same time. So, assuming you stay within those boundaries, you can use the same SNs for both installs.
To do that at this point in time, you'll probably need to trash the munged SN file on your laptop. So, go to:
/Library/Application Support/ProApps/System ID
and trash that file. Empty the trash. The next time you open Final Cut, you will be asked for the SNs again. Enter the SN for the upgrade, then for the previous SN, enter the SN from your desktop. That should do it.
But seriously, it would be a violation of the SLA to use FCS apps on both computers at the same time. K?

FCP Upgrade from FCS to cater for QT7.6

I'm in the UK using PAL
I've dropped a clanger recently and uprated to QT7.6 from 7.2 and can no longer log and capture any stuff from video tapes (analogue) yet I have a local demand for quite a lot of transferring from tapes still to be done. QT7.6 is the culprit. I can't get rid of it to downgrade. If I can move up instead and once again log and capture analogue it's the way for me to go. If I upgrade my FCP 5.1.4, wiil l then be able to use my analogue log and capture for editing purposes again?
I was gong to trash everything and re-install but if I can gain everything back by upgrading, I'll do it that way. I'm already furious at being seemingly cheated by Apple in obeying its advising all QT7 users to uprate to 7.6 and don't wish to further aggravate my problem with yet more errors ....
Anyone using a higher grade of FCP and also doing log and capture of analogue stuff. All help needed here. Ta!

**** - **** - **** ... I erased everything and reinstalled OSX then tried to install my Final Cut Studio upgrade. It wouldn't accept it for installing without the serial numbers of the previous FCPs (1,2 and 3) that I USED to have but which disappeared in the direction of a grandson ... The grand idea was to in any case re-install the FCS from the Lacie but it won't go. Just flashes to indicate beginning to open up but that's all. I realise that I should perhaps have reinstalled the FCS without installing OSX first, it having OS 4.7 which installed earlier, albeit without wroking properly.
What a mess I'm having with Mail, too! I've gone onto Virgin.net and am using its mail facility in the absence of the Mac one which which incessantly asks for a proper pasword. At the moment, Apple is definitelyout of favour!
I can get FCP 5.1.4 to make a showing within the Lacie but it won't operate in the fresh set-up I've done on my startup drive - and of course, it is suffering from not being able to log and capture analogue stuff, the reason for all this mess in the first place.
Help if possible would be most appreciated.

Final Cut Studio 2 Upgrade from FCS - How's It Going?

Hello
I'm been using FCS 5.1 with great success. I have quite a bit of WWII footage stored and edited. The color correction program, 'Color' in FCS 2 is superior to FCS. I bought the upgrade but haven't put it in yet. Was wondering if you guys could give me your opinions about the Upgrade? Does it open older projects ok? Is it problematic in any areas? I do realize once you've opened a older project, it will forever be saved in the newer version.
Thank You
Mike
Film Web Site;
http://www.ww2survivorstories.com/

We are busy WORKING. Two hours...a bit impatient aren't we?
lol.
FCP 6...Studio 2...is a great improvement over FCP 5.1.4. Color makes it worth it, Motion 3 makes it worth it. Added support for other formats and better stability makes it worth it. Upgrade is solid....go for it.
Shane

Final Cut Studio 3 upgrade from FCS 2

What is the main difference between the Final Cut Studio 3 Upgrade version and the full retail version? I already have FCS 2 installed with all content but wonder if there's anything missing from the upgrade version compared to the full installation. Is it just the applications that are updated or is there any new content that I'll be missing with the upgrade?

And why would you trust us? We don't work for Apple and it is unlikely one of us will purchase both versions - so how would we know?
When in doubt, throw money in the general direction of uncertainty. It won't be a better solution but you'll feel that you've done everything possible to acquire the best solution. You'll also have the benefit if being able to sell your old FCS version on ebay because you won't need its serial number as a basis for the upgrade.
ymmv of course.
cheerios,
x

Upgrading to FCS 3

I'm looking to upgrade to the new FCS, as well as transfer the applications to a larger hard drive. Problem is, I can't find my original install discs for FCS. Is it possible to use just the registration number from the original to do a clean install with the FCS upgrade package? Anyone tried it?
thanks for any advice!

Is it possible to use just the registration number from the original to do a clean install with the FCS upgrade package?
Yes, that's the recommended method.
-DH

FCS 2 Upgrade from FCS 1 at Apple Store

Anyone actually purchase this ($499) upgrade from a local Apple store?
I stopped in today after they said they had it in stock on the phone (arrived today) and they only have the FCP 1 upgrade package ($699).... they were not even sure if the FCS 1 upgrade package would be available in the local stores... geez....
Thanks

Pl also see this related thread - Re: Many db objects error after Upgrate EBS 12.1.1 to EBS 12.1.2(7303033)
HTH
Srini

Why is upgrading Firefox so confusing?

Why is upgrading Firefox so damn confusing? I just upgraded at Firefox's urging and when the new page opened it still said I am not on the latest version. One problem is that when you click on "Upgrade" it takes you to a page where you would expect that somewhere it would say "Upgrade." But that is not the case. The directions are unclear on how to proceed and I am never sure if I am in fact upgrading. The process often does not work the first time.When you are done, why isn't there a box that says "You have successfully installed the latest version of Firefox" so there is no ambiguity? This recurring problem makes me reluctant to bother upgrading whenever Firefox prompts me to do so.

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained by Google.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

Upgraded to FCS 2 and Final Cut Pro 6 crashes when I try to open it...

So yeah I had Final Cut Pro 5... I upgraded to Final Cut Pro 6 and when it is loading effects in start up it crashes every time. I have restarted the computer ect... but it didn't help.
Any idea what I can do?

The best way was to do an install on a clean disk (in other words install OS on blank partition and then install Studio 2 without installing earlier versions) A bunch of threads on install and the rest.
Clean Install Links

Upgrade to FCS 3 CONFUSION!

Similar Messages

Maybe you are looking for