Upgrade to I-Tunes 7.4.2 with Apple Software Update for Windows

I upgraded to I-Tunes 7.4.2 and that went great. But I was also offered an Apple Software Update for Windows which would not install. The error message said something about a part of it not being able to run. Is this a Vista thing? I still have Windows XP and don't plan to change to Vista. Will I have issues with newer versions of I-Tunes if I can't get this Software Update for Windows to install?
Thanks!

Thanks for the replies, but what I am hoping for is a solution.
Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
(Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

Similar Messages

  • I-Tunes 7.4.2 with Apple Software Update for Windows

    When I upgraded to I-Tunes 7.4.2, I was also offered an Apple Softward Update for Windows. This failed to install. The error message said something about part of it not being able to run or something. Is this a Vista thing? I still have Windows XP and don't plan to change. Will I have problems with newer versions of I-Tunes? How can I get this Apple Software Update for Windows to work - or do I have to?
    Thanks!

    Thanks for the replies, but what I am hoping for is a solution.
    Even though I asked, you never said if you have an ASU 2.0.0.21 ... so this solution runs the risk of being irrelevant to your situation. (It applies to the issue of ASU 2.0.0.21 on an XP PC returning an "invalid signature" message when trying to download an ASU 2.1.0.101.)
    If that's what you've got here, then usually a software installer bundle from Apple which contains a higher version of ASU than the 2.0.0.21 will install on the PC in question.
    (Avoid using the BonJour for Windows 1.0.4 standalone installer just at the moment, as a precaution. Last time I checked, about 20 minutes ago, that still contained an ASU 2.0.0.21, and that won't get you any further forward than you currently are ... assuming that you've currently got an ASU 2.0.0.21 in place.)
    So download and install another Apple installer bundle. Here's a link through to the QuickTime Standalone installer, although the Safari for Windows or iTunes installer would also work:
    Latest Quicktime Installers … get the one that doesn’t mention iTunes
    That should, as part of the install, update your ASU to version 2.1.0.101. To check on that, launch ASU ("Start > All Programs > Apple Software Update"), go "Help > About Apple Software Update" and check the version number. If you're now at ASU 2.1.0.101, you're past the problem with ASU 2.0.0.21 returning an 'Invalid signature" message when trying to install an ASU 2.1.0.101 (assuming that's the particular problem you were actually experiencing).
    You can then uninstall QuickTime for Windows (or Safari for Windows, or iTunes and QuickTime and Apple Mobile Device Support, depending on what installer you used to update your ASU version) through your Add/Remove programs control panel.

  • HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

    Hello,  I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad.   I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software.   Please send me download file of Apple Software Update, immediate.   Thanks
    I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
    david

    I went into checking with Apple Software Update then I clicked Control Panel  - "Repair"  It was restored to start menu,  thank you much  thumb up to b noir       Big Helping me!  David

  • I have clicked the Apple  Software Update,a window pops up with Failed to check for updates.The operation couldn t be completed. Operation not permitted.This only occurring now did not happen previously.I am using 10.7.4,on a Mbp Pro.

    I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
    The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
    before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
    Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
    here in Koolewong.
                        richard.

    Uninstall Intego...you don't need it.

  • Problem with HP Software Update for Macbook

    There's a recent update for HP Software for Macs called update 2.12, but I think it has a bug because now my scanner isn't working. I have the 4-in-1 HP Laserjet 1536, and now I can't scan documents as pdfs in the document feeder. The flatbed will only let me scan pages as individual .jpeg files, but I have a  multi-page project that need to be in one pdf. The HP support website is not helpful at all- if you ask a question the only response you get is to call HP, where you can probably wait about an hour on the phone before getting no help. Anyone else have this issue or knows how to solve it?
    - Thanks

    Hi Hannah,
    Try removing the printer via the "-" button in the printer list, then re-adding the printer with the "+" button.
    It should prompt a reinstall of the software required.
    I work with HP.

  • Problems with the software update and windows vi

    Hello,
    I have been looking all over this forum and couldn't find an answer to my question, so I decided to post it myself.
    Recently I bought a laptop with windows vista installed on it, and my creative zen vision M 30gb software stopped working. After ignoring this problem for a month, I thought creative might have already came up with a solution. I downloaded this new software package; Creative ZENcast Organizer .04.06 Suite. When I tried to install the software, I received an error, stating that my windows media player wasn't up to date. After double checking my windows media player updates, I concluded that my windows media player was up to date. Still I can't install this new software. Looks like creative is living up to its BAD reputation over and over again. Any help?
    kindest regards,
    Carlos Vangilbergen.

    Out of boredom I decided to try to use the usb cable that i use for my digital camera instead of the bundled one?The Vision M burst into life!?

  • Error updating to itunes 10.5.3 with Apple Software Update

    I am getting an error message when I try update my Itunes to ver 10.5.3 through Apple Software Update. Any ideas how to fix this and not lose my iphone backup? My iphone was restored at the genius bar yesterday and is blank now.I need to reload my backup onto my iphone but can't do that until I have iTunes ver 10 or later.
    If I download it manually and run the install will I lose my itunes files inluding all my backed up data, Contacts, photos etc?

    I am getting an error message when I try update my Itunes to ver 10.5.3 through Apple Software Update.
    What does the error message say? (Precise text, please.)

  • Why two QuickTimes with Apple Software Update in Vista under Boot Camp?

    Running Apple software update in BootCamped Vista, I see selection for 1) QuickTime, 2) Safari, 3) iTunes & QuickTime.
    Items 1) and 3) are by default checked for download. Why would I want to download QuickTime twice??

    Hi!
    Funny you should mention that! Same thing happened to me yesterday, I was downloading Boot camp 2.1 and there were the other three downloads you mentioned. I downloaded them anyway. I now have Safari 3.2.1 (etc.) on my Windows partition. Why did I do that ? To be frank I do not know!! Now you have all three on the Windows partition.

  • Need help with apple software update error

    some time ago i must have installed some update that maybe wasnt apple approved, or i dont know exactly waht happened, but i did a virus scan i had a bunch, got rid of them, and am now trying to reinstall itunes(i uninstalled because it was acting funny probably because of the viruses) and i cant because it has an apple software update that is preventing the new install from occuring when i go to add/remove it telle me that "the feature you are trying to use is on a network resource that is unavailable", ive tried to find the file applesoftwareupdate.msi, but nothing. so what can i do, i just got an ipod touch and i cant f ing use it, please please HELP!!!!!!!!!!!!!

    I'd recommend trying to uninstall everything - http://docs.info.apple.com/article.html?artnum=93976 .
    If that doesn't resolve it, I'd recommend going through it, or try installing through another user if you're able to.

  • Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

    Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
    Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Any Ideas of how to solve this one?

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • Hard Drive warning when upgrading to Mountain Lion. 2 try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Hard Drive warning when upgrading to Mountain Lion. 2nd try and I was able to upgrade. Software update for IPhoto, had problems restarting. Do I need my hard drive checked

    Yes.
    Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.
    When you see a white screen with an Apple logo in the middle, you can release the keys.
    Click Disk Utility, and then click Continue.
    In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
    Click First Aid.
    If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
    Click Repair Disk.
    If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done.
    Otherwise, you may need to do one of the following steps.
    If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.
    If you continue to have problems with your disk, it may be physically damaged and need to be replaced

  • I have tried to upgade to the latest version of i tunes and am unable to do so so. The problem being that i have lost the installation source for apple software update any ideas of how to get this back ?

    i have tried to upgrade to the latest version of i tunes. I have been unable to do so as when it gets 2 thirds of the way through the installation a message appears saying that i have lost the installation source for apple software update any ideas of how to get this back and install itunes again?

    A second generation iPod touch can't be updated past 4.2.1.
    (86969)

  • I tunes could not contact the ipod software update server

    Hello all,  I am running a Dell laptop running windows 7 professional with mobile broadband.  I have the latest i Tunes software installed.  I have a ipod touch that I am trying to update the software but keep getting the same error.  i tunes could not contact the ipod software update server because you are not connected to the internet.
    I have seen many potential solutions and have tried them all.  What can I do to remedy this situation?

    Thank you Illaass
    None of the suggestions in your link fixed my problem.  HOWEVER, I did find something that did!  I used the network diagnostic tool in i Tunes.  It was not recongizing the internet connection.  It offered some solutions, which include the ones at the link you provided plus a few more.  The fix seemed to be to de-select the option "check for server certificate revocation*" in internet options -> advanced -> scroll down to the "Security" section, 5th item in the list.  I am not a computer guy and I'm not sure why this worked, but it was a suggestion from i Tunes network diagnostics.  Hope this helps someone else.

  • (Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

    All,
    There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
    Version:
    6.4.0.1700
    Release Date:
    2011/05/16
    Affected units which uses this version of driver are as follows.
    Support models ThinkPad L420, L421
    ThinkPad L520
    ThinkPad T420, T420i, T420s, T420si
    ThinkPad T520, T520i
    Thinkpad W520
    ThinkPad X1
    ThinkPad X220, X220i, X220 Tablet, X220i Tablet
    ThinkPad Edge E220s
    ThinkPad Edge E420, E420s
    ThinkPad Edge E520
    Issue has been raised to engineering and the team are currently working on it.
    ****Please do not update the Bluetooth driver until further notice****
    We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
    Main thread discussion here
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD
    Solved!
    Go to Solution.

    All,
    Updated drivers have been released to the web team and should be published in the next couple of days.
    Will update this thread once they are live - the official solution will be to use the newer drivers.
    mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Lost internet when did Apple software update with Lion

    I no longer have a network connection with my Macbook 2.26GHz Intel Core 2 duo that I had upgraded with Lion.
    I did an Apple software update after using the new OS for a few weeks only and then only intermittently
    and when my computer restarted I can't connect anymore. If anyone else has had
    this problem and can give me some ideas of what to try I sure would appreciate it.

    Hi John,
    Pre Leopard I was able to fax from an application wirelessly (same as print) to my 7100 series Photosmart. I was able choose PhotoSmart C7100 series print (9152F) to print or C7100 series 192.x.x.x Fax to fax anything from any application. The fax driver was not completely compatible with 10.4.10 as alot of the items in the print/fax dialogue were there but not visible... looked as if it were corrupted, but it worked after you added fax recipients. I like this feature as this printer has no document feeder for faxes, so they have to be sent a page at a time which is a pain.
    I still have a PhotoSmart C7100 Fax.app somewhere on my computer, but can't get it to show up in the setup utility fax/print when I try to add a printer. I've held off calling HP support as I doubt they would have a solution yet if ever. Grateful if you have any thoughts.
    Thanks,
    Carter
    Just opened up Print and Fax on my MacBook 10.4.10 and the options are for "printing/faxing/sharing" These are not available in Leopard. Under options in Leopard, it's just "general/driver/supply levels"
    Message was edited by: CD3
    Message was edited by: CD3

Maybe you are looking for

  • Passing params to the AMImp method from backing bean

    Hello. I am an ADF/Jdeveloper Noob and i have a requirement where I have created an AM method below and exposed it to my View Controller. I am using Jdeveloper 11..1.1.4 to doe this. //In AM public boolean createSRTask(String sourceName, Number sourc

  • How to upload site to FTP Host on Yahoo ?

    Just finished building a website in Adobe Muse and am a little confused on the info it requires.  The website I am trying to replace is "yincae.com" so would that be both the domain name as well as the host directory?  Because everytime I put that in

  • Problems with Query

    I am having strange behavior when searching my library. When I type text into the search field, the images displayed in the browser do not change. It behaves the same if I use the Query HUD. The only way that I can get it to search is to type the key

  • PageMaker6.0 and Acrobat 6,0 Pro

    When I shall create a pdf file from Page Maker, the images moves from its place in to the text. Do You know why?

  • All my movies are in 4:3 scale. I need to finalize a dvd, and when the movie enters in iDVD, burns in 16:9 format. What must I do?

    I need a help from you. All my movies are in 4:3 scale. I use always the same Easy SepUp in Final Cut. My movies is compressed as DV NTSC in 4:3 format. I need to finalize a dvd, and when the movie enters in iDVD, the preview appears already written