Upgrade to Ios7, now getting duplicate messages

My daughter upgraded her iPhone 4 to Ios7. We do share the same Apple ID. Now, when we are using iMessage, we get copies of each other's messages and my phone continues to send my response as a separate messages to my phone. I did get a message from Apple yesterday that said that my Apple ID was used to sign into Facetime We have always shared the same id, but with this upgrade, we seem to have all sorts of quirky issues. any thoughts?
Thanks

I'm sorry, but the system was never designed to be used by more than one person.
Apple ties everything you purchase to your Apple Id.
Right from day 1 you should have created a seperate ID for your child. Then anything you gifted to them, or gave them gift cards to use on their own, would be forever tied to their Apple Id.
Nice and easy.
All you can do now is create a new ID for them here: https://appleid.apple.com
And then either gift them their songs (still a new purchase), or let them purchase all new ones with your credit card or gift cards.
You can try caling Apple customer support to see if they will split the purchases to a new account. Good luck.

Similar Messages

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

When using Message Filters on an IMAP account I often get duplicate messages in my local folder where important messages are put. How can I stop this?

Since switching to IMAP and using message filters, I often get duplicate messages in my local folders. I think this is a bug.
That is my guess as to what is happening.
When the IMAP part starts syncing with the server to fill in the inbox, the message filter system starts working before it is done syncing. I appears that the filters runs too quickly because as the filter moves a msg to a local folder, the sync thread think it need to download it again from the server. If the sync with the remote server takes a long time, I could end up with 5 or more copies of the exact same email.
This has always happened for years now but I figured someone would have noticed it and fix it by now. Now I am wondering it it has something to do with my filters or my settings.
Has anyone run into this before?

Toys,
I was just doing a search to see if anyone else was feeling this way! I am also at a university and I don't really like see thousands of unread messages in mail. (Fortunately, with Leopard you can select the dock icon to show only the messages in your inbox but I still don't like having the public folder in there).
Please let me know if you find out anything and I will do the same for you. If I have time later I am going to run by our IT office later and ask them.

HT1925 I have tried everything here and iTunes still won't open.I now get the message, The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Recently I have not been able to open iTunes,I tried removing and reinstalling it but still won't open. I now get the message The file "iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Any suggestions on how to get iTunes to work again ?
Thanks
<Edited by Host>

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

HT201210 I downloaded the latest update to itunes. I am now getting a message that my ipod is on recovery mode and needs to be restored. When I click to restore, it says it does not recognize the device.

I downloaded the latest version of itunes. I am now getting the message that my ipod is in recovery and needs to be restored. When I click to restore, it says it does not recognize this device. Now my ipod is frozen with an image of a cord and an arrow pointing toward the itunes icon. All was working fine before the download!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

I purchased a song on this Mac, an authorized computer. I am now getting a message that this computer is not authorized to play the song. Why??

I purchased a song on this Mac, an authorized computer. I am now getting a message that this computer is not authorized to play the song. When I provide my username and password to authorize my computer, the song is still not authorized. Why?

iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - http://support.apple.com/kb/ts1389. If your country permits re-downloads, delete the file and re-download.

I have been using Elements11 for almost a year. I am suddenly getting the message:Some of the application componentsare missing from the application directory. Please reinstall. I deleted old version, reinstalled on my Mac and now get this message:A requi

I have been using Elements11 for almost a year. I am suddenly getting the message:Some of the application components are missing from the application directory. Please reinstall. I deleted old version, reinstalled on my Mac and now get this message:A required application library failed to load and the product cannot continue. I also get the first message again. Organizer works but not editor. Frustrated!

What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs.

HT1947 After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

After upgrade to Remote I get error message that says I must connect to wi-fi, though I am connected! What can I do?

Hey gwscrt,
Since iTunes directed to you to restore your iPod, I'd check out the following article that goes over the steps to do so:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I would read the document in full, but here are the applicable steps for you:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
Have a good one,
David

I have updated my Apple ID and password, but am now getting a message that iCloud can't sync. On my iPod Touch, it still is showing up as my old Apple ID/email address.

I have updated my Apple ID and password, but am now getting a message that iCloud can't sync. On my iPod Touch, it still is showing up as my old Apple ID/email address.

Thanks! I found an earlier post making reference to deleting the account and then signing back in with the new info -- basically the same idea. Thanks for your help!

Getting duplicate messages

          Hi,
          I have created a topic publisher and subscriber.
          When an event is generated I am getting duplicate messages
          for the same event.
          I need them to be excatly one. I think they are generating messages as atleast
          one.
          can you please help.
          thanks
          Padmaja


If you are receiving 5 messages with 5 different message ids, then you are
          likely doing that yourself. When we redeliver messages (for any reason),
          the message ids stay the same. Message ids are assigned as part of the send
          call and nowhere else in the entire code base. So it sure sounds like you
          are doign multiple sends. Println goes a long way here. Instrument your
          code before every send/publish call and then print out the message id
          immediately after the call. maybe even do a new
          Exception("DEBUG").printStackTrace(), so you can see where you are doing
          it.
          _sjz.
          "Padmaja Ragavendra" <[email protected]> wrote in message
          news:[email protected]...
          >
          > No I am not using recover or rollback.
          > The message ids are different but of the same event.
          > From a session bean everytime an object(EB) changes state
          > a trasmit is called.
          > on a single state change 5 messages are being generated with different
          ids.
          > I am using publish(message).
          > I tried using delivery mode etc but still is giving the same result.
          > thanks for the reply.
          > Padmaja
          >
          >
          > "Zach" <[email protected]> wrote:
          > >are you using transactions? are you calling recover or rollback? are
          > >the
          > >message ids identical?
          > >_sjz.
          > >
          > >"Padmaja Ragavendra" <[email protected]> wrote in message
          > >news:[email protected]...
          > >>
          > >> Hi,
          > >> I have created a topic publisher and subscriber.
          > >> When an event is generated I am getting duplicate messages
          > >> for the same event.
          > >> I need them to be excatly one. I think they are generating messages
          > >as
          > >atleast
          > >> one.
          > >> can you please help.
          > >>
          > >> thanks
          > >> Padmaja
          > >
          > >
          >

I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2. When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported. How can I access all of my save Word documents? I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004). If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

I've installed icloud on my ipad but when I tried to install it on my MacBook re mobileme, must have blocked it and now get a message saying I need to enter another name

How can I uninstal my mobileme account and install my icloud address? Mobile me doesn't recognise my Apple ID....won't allow me to open icloud on my MacBook. keep getting a message saying I need to enter another name or pin......nothing works........I've probably blocked it as server keeps saying try later.......

The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Why do I keep getting duplicate messages from IMAP

I have several different gmail accounts, but on one account I get some messages twice, others only once.
I have contacted the primary sender, to make sure they only have one account for me.
Do I have something set to pull things down more than once? Original & duplicate always come in together.

seyi wrote:
I have been trying to upgrade my iPad OS but during the process i keep getting error messages Does anyone have any idea why this is so?
My first inclination is to answer your question --- yes - something is going wrong! I'm sure more specific information will be needed to help you.
Are you getting a specific message? An error code number? Can you describe exactly what you are doing when you get the message?

Upgrade to Ios7, now getting duplicate messages

Similar Messages

Maybe you are looking for