Upgrade to iTunes 7.2 broke connection with remote speakers

There have been a few discussions about the inability of iTunes to connect to remote speakers in the past, and I found one that was answered regarding an upgrade to 7.0 back in September 2006 - b noir recommended the help article posted on his page: http://docs.info.apple.com/article.html?artnum=304371
My issue is the same as the one posted in Sept. 2006, but it only started when I downloaded the upgrade to iTunes 7.2. I see the remote speakers greyed out in my iTunes speaker list but can't select them. The fix in the help article above of configuring IPv6 doesn't help. Has anyone else run into this/have any suggestions for me? My wireless network consists of 2 Airport Expresses; the extension is the one hooked up to my speakers.
Many, many thanks!

I'm experiencing something similar where my remote speakers are working well from my Macs (wired) and Windows Vista laptop (wireless) but do not show up at all from my Windows XP desktop (wired).
I do have Symantec Personal Firewall running, but I have (1) trusted my local internal network, (2) explicitly opened ports 3689 and 5353 and (3) tried it with the firewall disabled with no luck. I do not have Windows Firewall running, and I don't believe I have anything else that would be limiting network traffic. I do not have Bonjour or Rendevous services running. I can ping the AEs just fine (I have 3 AEs), and I am on the same subnet. I have selected LOOK FOR REMOTE SPEAKERS in the iTunes settings, and I am running the latest version of iTunes (7.2). I have also not tried downgraded to an earlier version of iTunes, but for now I'd rather get this fixed in another fashion as 7.2 works well from my other machines.
I hope the above description (with fixes recommended by other users in other threads) is helpful. I appreciate any input or feedback people may have.

Similar Messages

  • Itunes 9 won't connect to remote speakers when firewall on?

    Hello all
    Got an annoying problem streaming to Airport Express. Hopefully somebody has come accross this or has a suggestion on how to resolve it.
    When Itunes 9 tries to connect to remote speakers linked to AE it give an error message of something like "error connecting to remove speakers ASDFDSFLDSF. unknown error(-15000)". I have noticed that when I turn my firewall (ZoneLabs) off everything is fine. I have put Itunes on the program list of trusted programs but this doesn't help matters.
    Airport express is about 1 month old and has all recent updated.
    Anyone got any idea what I should be doing?
    Thanks in advance,Andrew

    When Itunes 9 tries to connect to remote speakers linked to AE it give an error message of something like "error connecting to remove speakers ASDFDSFLDSF. unknown error(-15000)".
    With any luck, the following troubleshooting document may be of some help with that:
    [Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes|http://support.apple.com/kb/TS2278]
    EDIT: drat ... sorry, that one's for the Mac ... okay, will look a bit further to try to track down the relevant Windows firewall settings. At any rate, if you're behind on your Firmware versions, it would still be worth checking on that.
    Message was edited by: b noir

  • Not able to connect with remote speakers after successfully set up

    I just finished setting up successfully (joining existing wireless network) but when I go to Itunes and select my remote speakers it just goes connecting to airport and then stops. Any ideas why?

    You might want to try upgrading to the latest version of JavaMail (1.4.3), which makes use
    of SSL somewhat simpler. Also, the file SSLNOTES.txt included with JavaMail has some
    tips for debugging problems such as this, as does the JavaMail FAQ.
    Most often this error is caused by not having the appropriate certificates in your local trust
    store. The JDK normally comes with the required root certificates, but if you're running in
    an application server environment you might be using a different trust store.

  • Upgrading to 10.0.1 lost connection to remote speakers on Airport Express

    after upgrading iTunes 10 to 10.0.1 the name of my airtunes speakers connected to Airport express (Firmware 7.4.1)is visible in iTunes but won't play music (error -15000).
    Same observation in two of my PC (Windows 7) laptop/Netbooks.

    Solved the problem. Uninstalled iTunes completely. Restarted. Reinstalled iTunes 10.0.1. Said allow to the firewall setting changes. Done. Connection to remote speaker regained.

  • After iTunes update, can't connect to remote speakers via Airport Express

    I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
    My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
    Anyone else have/had this problem? Any ideas?

    I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
    I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
    Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

  • After upgrading to itunes 10.5, and connecting ipad 2, message appears " IPAD cannot be used it requires itunes 10.5 or later. Go to itunes store and download the latest version." I am windows xp user.

    After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.

    Dear Mr. Sawyer,
                                To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
    Thanks for your response and concern.
    Regards
    Amit Samel

  • I recently tried to upgrade my itunes on my dell laptop with 64bit Windows 7 and it stopped working completely. So I tried deleting and installing all over again and haven't been able to reinstall it since. I've tried numerous things i've read in forums

    I recently tried to upgrade my itunes on my dell laptop with 64 bit windows 7. It stopped working so I deleted all files and tried to reinstall and haven't been able to since. I've tried numerous things i've read in forums and nothing seems to work. The installation will not move past the "publishing product information" point. After being stuck there for a while this error message appears:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="x86"', Please refer to Help and Support for more information. HRESULT: 0x800736FD
    I hope someone is able to help me with this.

    Did you already try what bnoir suggested in this post about error 0x800736FD:
    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FD, or some other number? (If they're another number, what number are you getting?
    This thread might help as well, suggestion provided by bnoir:
    In general, these ones tend to be caused by underlying problems on the PC that can prevent Windows Updates from installing. So my main strategy with them is to try to fix the Windows Update issues. If we can get Windows Updates flowing again, that generally clears up the iTunes install errors +en passant.+
    Head into your Windows Update, and check for any new updates. Do any fail? If so, open your Update History and doubleclick on the failure entries to bring up a small box with alphanumeric error message codes. Are you getting 8000FFFFs? (They often seem to be associated with an iTunes-install 0x800736FD.)
    If you're getting 8000FFFFs, try the following Microsoft document:
    [Windows Update Error 8000FFFF|http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error- 8000FFFF]
    Head back to Windows Update, and stock up on any updates you're behind on. Once you're completely up to date in that regard, try another iTunes install. Does it go through properly this time?
    Message was edited by: Ingo2711

  • HT201412 my apple ipad is disabled and saying connect to itunes. i tried to connect with itunes but not responding

    my apple ipad is disabled and saying connect to itunes. i tried to connect with itunes but not responding

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

  • ITunes cannot connect to remote speakers / Airport Express

    Hi Guys
    This is a quick post with a problem & solution.
    I've been searching for ages tonight to find a solution to my problem:
    'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
    So, just incase some people are still looking for an answer:
    What I did...
    1. Go to System Preferences, Network.
    2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
    Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
    3. Open iTunes, go to preferences.
    4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    5. Close iTunes
    6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    7. Connect to remote speakers worked!

    thanks Simius,
    I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
    so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
    in the old system one could turn it off completely, now the off button is gone.
    there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
    anybody has any idea?
    thansk a lot
    D.

  • ITunes 8: I can no longer connect to remote speakers via Airport Express

    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility
    I get the following error code (-3256) Apple KB research says:
    AirTunes: Error -3256 when streaming to multiple AirPort Express units 
You may see this message: An error occurred while connecting to the remote speaker speaker_name . An unknown error occurred (- 3256 ).This occurs with iTunes 6.0.2 or later.SolutionIf you use a third-party firewall or router, make sure that it is configured to permit UDP traffic.
http://docs.info.apple.com/article.html?artnum=303157
    I followed the KB link, tried KB solution, then I sent this off to Apple.
    "Mac G5 2.0 Ghz, OS 10.5.4 just installed iTunes 8, one (1) Airport Express connected to remote speakers. Firewall under Sharing in System preferences does not offer firewall access. Firewall is under Security but "Advanced" is grayed out.
    Cannot connect to my remote speakers, worked before iTunes 8"
    I have restarted the computer, iTunes, QT 7.5.5, run disk utility, unplugged the airport express.
    My G4 PowerBook running an earlier version of iTunes connects without problem.

    I just got off a 30+ minute phone call with an Apple Support rep about this. I'm getting error -3256. The rep was patient and tried hard to solve the problem, but was basically clueless. I have a case number and was encouraged to call back tomorrow to speak with a product support specialist.
    This stinks. AirTunes is my primary way of playing music from my computer. With no obvious way of rolling back to iTunes 7, this is a big deal.

  • ITunes doesn't connect to remote speakers on my Airport Express?!?

    Can you help me solve this technical issue? I have a Linksys wireless router with another device as a wireless repeater (to extend my wireless network). On the other end of this wireless network is my AirPort Express with the AirTunes enabled.
    I can ping my AirPort Express from my iMac. But, my iTunes is not successful connecting to the speakers. Can you suggest some remedies for this? Thanks in advance.
    James

    Thank you for the quick suggestions. Here are the facts:
    1) iTunes host are on the same network subnet as the AX. I can see both of them on my router. The iMac which the iTunes is running can ping the AX. In fact, the remote speaker is listed in the popup window that shows the built-in Speaker as "Computer" and the name of the AirTune on the AX.
    2) No firewalls between the host and the AX...as far as I know or can tell, all ports are opened within the home network.
    3) The AirPort Utility can see the AX and let's me update the configuration without any problem.
    4) OS X Firewall on my iMac is set to Allow all incoming connections
    Again, I'm stucked and confused because my iMac can find the AX thru the AirPort Utility as well as from the iTunes by listing the AX's speaker in the Remote Speakers list.
    Why then it cannot connect to it to play music is very big mystery...help! I really like to play music in my backyard.
    James

  • ITunes 7 for Windows Vista: AirTunes won't connect to remote speakers

    HELP!!
    Everything was working fine, until 2 weeks ago, when suddenly, my airtunes wouldn't connect to my remote speakers! The little button at the bottom of itunes, which gives you the option of listening to music through your computer or the base station no longer appears! My internet connection is fine however. Has anyone else encountered this problem with Vista and do have a solution??
    Chris

    Make sure that your Airport Express is still working: should show a green light.
    Even if it is green, do this:
    Unplug (30 seconds) and plug your Airport Express. Wait until it flashes green. You might have to reboot your computer.
    Still not working?
    In iTunes ->Edit -> Preferences -> Advanced->Look for Remote Speakers (this should be checked).
    You should also check in the Airport Admin Utility, that you have "Enable Airtunes over this Base Station" checked in the "Music" tab. Update.
    Try after reboot.
    You might also consider a repair of iTunes.
    In Vista ->Start ->Control Panel-> Programs ->Uninstall a Program ->iTunes ->(right click mouse) -> Choose "Repair" option.

  • Still can't connect to remote speakers in iTunes (throu AX)

    The option to switch around from Computer to Airport Express/remote speakers has disappeared from iTunes. Any ideas?

    I had this happen to me on the odd occasion but now have it sorted. If I'm going to use my Airport Epress(s) I first make sure that my PC is connecting to the AE before I even turn on iTunes.
    A problem I was having was that my PC was connecting to my wireless router by default (specifically when my laptop was turned off) and not to the AE. As a consequence when iTunes started it greyed out the remote speakers and sometimes the button was not even showing up.
    Now that I ensure my PC is talking to the AE everytime I do not have a problem.
    I do have one annoying thing with the AE setup though, if I'm playing music over the AE and I unplug any USB device (printer, USB Key, External drive etc) the wireless connection is broken and I have to start iTunes. I suspect it is a hardware issue relating to my particular HP PC as I have just reformatted and reinstalled Windows XP and it still happens. I can live with it.

  • HT4587 I can't locate airport express icon in itunes to connect my remote speakers wirelessly, can anyone help please?

    Can anyone help please? I am trying to connect my remote speakers to my i-tunes library using Airport Express. Everything is connected and working using mt OS device (Ipod Touch 5th Generation) that works fine. I have tuned on home sharing and it says in itunes preferences that I am paired but according to the light on the airport express base station I am not connected to my existing wi-fi network. I cannot find the itune airplay icon anywhere in itunes nor can I find the network link by hovering my pointer of the network connections as suggested in the instructions that came with airport express. Would apprecaite some help please you can give. - thank you.

    hmmmmm.
    i'm not trying to get rid of you here, but it might be worth also checking-in/reposting over at the Airport for Windows forum. when Airtunes things get sticky, i generally defer to iFelix or RJ in WI, and they spend a lot more time over there than they do here.
    (traffic is so heavy in here at the moment that this thread might be buried out of sight before an AirTunes guru gets to see you.)
    here's a link through to the Airport for Windows forum:
    Airport for Windows

Maybe you are looking for