Upgrade to JRE 1.5.0.06 SDK AppletViewer Not Working & Missing
HELP!!
I recently updated my JRE to 1.5.0.06 and since installation, I cannot execute any JAVA Applets - I cannot even verify the installation. In the /bin directory I notice that the appletviewer.exe is missing.
When the applet loads, all i see is the java logo. Closing the "General Exception" dialog gives me the little red X and a message in the status bar that says "Applet <applet name> notinited".
I have uninstalled and reinstalled a few times to no avail! Any clues - classpath?, etc, anything will help right now!
Willie!
This is because not every applet is embedded with an applet tag. The IE setting was used to switch between MSJVM and SUN Java Plugin for applet tags.
(Lot of pages use the object tag as recommended by w3c.)
Similar Messages
-
After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?
Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope. -
Question
I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
::Worked for me:: -
Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Cheers, Tom -
After upgrading from 4.6C to ECC 6.0 templates not working in smartform
Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
AbhishekHi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran -
ce upgrading to iOS 7 the built in speaker is not working properly. It crackles & sounds like there's lots of interference
Hi, JoJoEvs.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when experiencing this issue. After all steps related to your sound issue have been processed, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Jason H -
Upgraded to iOS5.1 and now video out is not working. How do I fix this?
After upgrade to iOS 5.1 the video out is not working! Anyone have this problem? Is there a fix for this?
OK so I went to the Apple Store and they said my cable was a third party cable. We tried an apple cable and it worked! So Apple changed the pin out configuration on the OS 5.1 upgrade so only Apple cables will work! So I had to shell out another $40.00 to get that cable!
-
i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?
Welcome to Apple Support Communities
You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634 -
I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.
hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
John -
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out
After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.
Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.
-
Since upgrading to 6.1 my down volume button is not working. Is there a fix?
Since upgrading to 6.1 my down volume button is not working. Is there a fix?
I just noticed I'm having the same issue. ***??
-
After upgrading to itunes 7.3.2 system sound does not work
I recently upgraded my itunes to 7.3.2 and the sound worked for a short time. it then began to cut on and off until ceasing to work completely after a day or so. I have run diagnostics and my computer can produce sound, but not in any programs or any of the system sounds. i reinstalled windows xp and the sound worked, but when i installed itunes again the sound once again stopped completely. i have checked all the drivers, codecs, hardware etc. and they seem to be in order. what is going on?
I really struggled with this one and my IT people couldn't help. They suggested that I add my secure corporate website to the Java Exceptions Sites, and use the Java client, but that didn't work. I tried the CITRIX Native CLient (ICA Client) and that didn't work either. So, I searched my Mac for all of the instances of CitrixICAClient, or anything else with ICA in it. I then deleted all of those files, shut down Safari, rebooted my computer and tried again to log into my corporate site using the Native Client conenction option. I remembered from years ago, that the first time you try to connect using the native client, that Citrix plugin is downloaded. THat's exactly what happened and I haven't had any more problems. So apparently, you have to clean up a little adn make sure that any "old" citrix products are removed.
-
After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
After upgrading to mavericks my epson scanner v 600 does not work
After upgrading to Mavericks my scanner V600 epson does not work, I keep getting a message to re-install the software, but even then is does not work
I'm having the same issue. The scanning software doesn't launch, the scanner appears in system preferences after a few unplugs and plugins, and software update doesn't give me the recommended ICA update.
Also the Epson scan utilities aren't updated either and will be "released soon" according to here:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 139863&prodoid=63084673&infoType=Downloads&detected=yes&platform=OSF_M_X9
They recommend to use image capture (which is a joke) in the mean time or you could buy vuescan but thats not much better for some things.
Maybe you are looking for
-
Save as dialog window for excel file save ....
hi! i have a jsp that displays all the report names to the clients and when clicked on the report downloads an excel file and saves to the client machine.this is accomplished by calling a servlet that sets the content type as "application/octet-strea
-
[iOS][Running] Listening history of a Spotify Running session
I was doing my morning run on Sunday with Spotify Running (great feature!!) but I can't find the incredible songs that were played during my run... Please, implement a listening history on mobile devices ! Thank you!
-
Safari isn´t showing Facebook quick link on Mountain Lion
Hi guys, I´ve noticed that Safari won´t show Facebook link in the Condivision Quick Menu. I can just see Twitter but not Facebook. Any idea why? Thanks in advance.
-
Are there any test community? I finished my game development, I'm over the test, but need performance test on numerous different real devices. I'm not an employee of a big mobile software company, so I have only one phone (Nokia 7650) to try. The gam
-
IOS 5.1.1 will not install on my Iphone 4S. It fails to verify download
IOS 5.1.1 will not install on my Iphone 4S. It fails to verfiy the download and fails to install.