Upgrade to Lion issues
After upgrading, I'm experiencing a lot of issues. I want so badly to enjoy this new software but its becoming more of a headache.
1. For starters, when my computer screen saver comes on there's a slow response to get the log in screen to appear. I have to press several buttons and move my mouse around just to get it to wake up, then it shows up one pixel at a time.
2. Safari, I normally use Firefox but I love the page swipe so I switched over to Safari. I'm having issues with the response time, Safari lags and usually takes a minute or two just to recognize the command. (switching websites)
3. Then on top of that, I think resume is a great feature for some, but I turned the feature off and its still saving the pages. It takes 3 minutes just to log in and then 3 to 5 minutes to load all of the previous webpages. With the slow response from Safari, the last thing I want to do is save my previous websites.
4. Mission Control...... nice feature but very slow in response.
I have a 2008 iMac, with 4GB of RAM
Overall I'm not happy with the new upgrade and I'm thinking about going back to Snow Leopard.
Did you have a specific question or is this post just a gripe? If you have a specific question then please ask it along with all relevant information to help us help you.
FWIW, these forums are not a place to complain. We are users helping users with their technical problems related to Apple products.
Similar Messages
-
Upgrade to Lion issues: Missing launchpad icon
I upgraded to Lion recently but I cannot find the launchpad icon. I checked as well the Keyboard shortcuts and it still shows me "Dashboard and Dock" as opposed to "Launchpad and Dock". Can someone please help?
Do you have, or can you get, a Lion installer. If yes, then try for a fix by doing a repair install of Lion. If you don't have the installer, then see if you can download the installer by going to the App Store and holding down the "Option" key while selecting "Purchased." If you see "install" on the Lion line, then you can download by selecting "Install." If you get the installer, then do the repair install by running the installer from within the deficient Lion installation. For more on the repair install process, check this link out. Be sure and read about my test of the repair-install procedure on Lion on page 2. Be sure you are backed up adequately.
-
Hello,
I am using a MacBook Pro. Bought in April 2011. Upgraded to Lion, OSX 10.7.3
I have an Apple mail account that synced with a gmail account in my Mail Program.
I then chose the CLOUD activation. I can find my mail if I go to cloud.com but I no longer get any Apple mail delivered to my Mail program on my computer. My gmail account syncs just fine. In fact, the Mail program doesn't even open any longer when I double click. I have to go to the Mail menu, select Message Viewer to even view my mail program now. The Internet connection is testing fine using the Connection Doctor. But when the Connection Doctor program just whirs for eternity and never finishes checking the accounts.
Is this a bug? Do you have to set up your mailbox again for Apple mail to get it to sync after having mail hosted on the Cloud? Or does hosting on the Cloud mean I now always have to go the hassle of logging in at the cloud site to even access my Apple mail?
Any ideas out there? I am sure there are Mac geniuses, the real ones, floating around in cyber space and would love to get some intelligent directions to solve this new issue.
Cheers
AnneI would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne -
After upgrading to lion, vevo, youtube, and hbo no longer plays videos. I'm assuming this is some kind of plug-in issue. How can I resolve it?
Adobe has published a list of known issues relating to Mac OS 10.7 Lion here:
http://kb2.adobe.com/cps/905/cpsid_90508.html
The download page for Flash Player for Mac is here:
http://get.adobe.com/flashplayer/?promoid=ISMRZ -
I have a ReadyNas NV+ which I use as NAS storage. I make a lot of home movies in iMovie 11 (mostly family movies of my daughter growing up) which fills up my local HDD fairly quickly. I setup iMovie 11 when I was using Snow Leopard to connect to my NAS as an additional disk in the event library and project. I would move events and projects after I finalized and shared them to the NAS disk in iMovie so it would both clear up space on my local HDD but still be available in the iMovie 11 application.
After I upgraded to Lion, I can no longer see the NAS disk in either the project library or event library. I'm concerned if I have created a condition where I won't be able to access the projects and events which I moved to the NAS disk when I upgraded to Lion. Has anyone else experienced this issue and has anyone else found a solution to this? Any help would be greatly appreciated.Did that work for you? I was looking at that too, but was discouraged by having to use a sparsebundle given Snow Leopard had such great NAS support.
FYI to everyone else, I upgraded my ReadyNAS firmware to 4.1.8. NetGear indicated the following updates with the nre firmware, but it didn't fix this problem:
New features and enhancements
1. Added support for Mac OS X 10.7 “Lion”.
2. Added warning when NFS access to home shares is enabled.
3. Added a redirect for http://<host>/ip to https.
4. Added enhancements to advanced AFP permission settings.
5. Provide download links for exported users and groups instead of asking for email.
6. Updated ReadyNAS Remote to the latest revision.
Bug fixes
1. Fixed javascript error in FrontView.
2. Delay auto power-off if backup jobs are still queued.
Limitations
1. IE 6 no longer supported.
2. Drives greater than 2TB are not supported.
I found this link which I thought had some useful information: http://carryflag.blogspot.com/2010/06/imovie-event-library-on-network-drive.html
Some people reported success with the terminal command:
defaults write -app iMovie allowNV -bool true
But apparantly, after the Lion update, fewer people reported success with it. Still looking though... If anyone else has more symptoms to add, please let me know. I might try to use a sniffer program and see if I can pull a packet capture. That might reveal some info....
On another note, has anyone had any problems connecting to their Time Capsule in the same fashion? I had an idea of connecting a USB Raid Array to it and connecting through the TC, but wanted to know if anyone had any thoughts or experience with that.... Thanks. -
Audio issues on Mid-2010 Mac mini upgraded to Lion
I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support -
After Lion upgrade, having network issues after wake from sleep
After upgrading to Lion from 10.6.8 on my MacBook Pro (15-inch, Early 2011), I am unable to connect to the Internet after the computer wakes from sleep. I should rephrase this - I am able to ping IP's and DNS (DNS servers are present) however none of my apps will connect (Safari, iChat, etc) -> they all indicate the Internet is unavailable. I have two Airport Express's running 7.5.2 extending a WiFi network off an Airport Extreme running 7.5.2. This issue is specific to waking from sleep. Any thoughts or suggestions would be appriciated.
It's definitely linked to Time Machine and backups.
I think If I put my machine to sleep/close the lid and Time Machine happens to be performing a backup, when I open the lid again, the network connection is lost and I receive a bunch of errors about the backup disk being unavailable.
This means that if my mbp isn't in the middle of a backup when I put it to sleep, wifi comes back up without a problem. -
Aperture serial # issue after upgrade to Lion.
Unbelievably angry with apple. Upgraded to Lion, have my Aperture 3 serial number but not my Aperture 2 number, no path to find the aperture 2 number. This link - selfsolve.apple.com/EXPERT/GetProductList.do is broken. Given that this is legally purchased software and I need to work now, my frustration level is very high. Reconsidering photoshop.
Yep, should have been clear with the questions. First question - why didn't the software keys transfer on the Lion upgrade? Seems pretty simple, and must have been many others with the same issue. Second question - how do you find a serial number for a software purchase from years ago - the software was purchased as a hard copy (all the way back to v1) at an apple store or resller, not online - so there is no record of it online, and I have long since disposed of the receipt. Third question - is the only way to contact apple via phone? Every online method I have used to try to solve this issue has led to a dead end. I've been an apple user since the 2E, and it just seems more, not less difficult to solve issues now.
-
ISight/Quicktime issues since upgrading to Lion
Hello,
I have tried everything but I can't seem to come up with a solution. Problems have arose ever since upgrading to Lion on my early-2008 Macbook Unibody. I have seen many users on this board saying that Lion has broken their iSight as well. Here are my issues.
iSight
- seen in System Profiler (Hooray)
- cannot be seen by any application
- does not work with any other user
Quicktime
- fails for screen recording, audio recording, and video recording ("The Operation Could Not Be Completed")
- can play movies just fine
Solutions I have tried
1. Uninstalled everything 3rd party
2. PMU reset (several times)
3. Repaired Permissions
Any other assistance would be greatly appreciated. Cheers.• If Apple's http://support.apple.com/kb/HT2090
suggestions do not help you, (are you certain that you used
the correct "reset" procedure?) continue with the following.
• Use Disk Utility to repair permissions and then
download and apply the 10.7.2 Combo Update:
http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
that completes the Combo update.
Properly applying the Combo version of updates
can sometimes correct problems like yours.
Message was edited by: EZ Jim -
Excel 2011 issues after upgrading to Lion
After upgrading to Lion, I cannot open .xls files anymore in Excel for Mac 2011. The files on my own computer work, but files that I receive via email cannot be openend. Does somebody know how to solve this? Thanks. Raymond.
Did that work for you? I was looking at that too, but was discouraged by having to use a sparsebundle given Snow Leopard had such great NAS support.
FYI to everyone else, I upgraded my ReadyNAS firmware to 4.1.8. NetGear indicated the following updates with the nre firmware, but it didn't fix this problem:
New features and enhancements
1. Added support for Mac OS X 10.7 “Lion”.
2. Added warning when NFS access to home shares is enabled.
3. Added a redirect for http://<host>/ip to https.
4. Added enhancements to advanced AFP permission settings.
5. Provide download links for exported users and groups instead of asking for email.
6. Updated ReadyNAS Remote to the latest revision.
Bug fixes
1. Fixed javascript error in FrontView.
2. Delay auto power-off if backup jobs are still queued.
Limitations
1. IE 6 no longer supported.
2. Drives greater than 2TB are not supported.
I found this link which I thought had some useful information: http://carryflag.blogspot.com/2010/06/imovie-event-library-on-network-drive.html
Some people reported success with the terminal command:
defaults write -app iMovie allowNV -bool true
But apparantly, after the Lion update, fewer people reported success with it. Still looking though... If anyone else has more symptoms to add, please let me know. I might try to use a sniffer program and see if I can pull a packet capture. That might reveal some info....
On another note, has anyone had any problems connecting to their Time Capsule in the same fashion? I had an idea of connecting a USB Raid Array to it and connecting through the TC, but wanted to know if anyone had any thoughts or experience with that.... Thanks. -
Issues with upgrade to Lion and iWeb '08
I upgraded to Lion and now my iWeb '08 will not open. I cannot even find my domain file. Please help! I'm a teacher and my whole class is on this thing.
The domain file used to be located by default in your Users/Home/Library/Application Support/iWeb folder.
In Lion the Finder folder is now invisible. To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button.
Once you make the library visible check to see if your domain file is located there. Then try to open it by double clicking on it.
OT -
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
Late 2010 MacBook Pro 15", upgraded to Lion on Sat 23rd no external display does not work
Hi all,
Wanted to ask this question here see if anyone might have a solution to my problem. I have a Late 2010 Macbook Pro 15" which I upgraded to Lion yesteray. Ever since that upgrade when I try to connect to my TV to watch a video no joy the image looks like the colours are out.
I have tried it on different resolutions and always the same. Then for some reason the MacBook Pro split the screen in two. So now I see the right of the screen on the left of the TV and the left on the righ with a big black line done the middle.
Priror to the Lion upgrade everything was fine. Only since Lion has this been a problem.
I am using a Minidisply to HDMI cable to go direct into my Phillips 42" Plasma, and I have not got a clue why this is doing this. The strange thing is it works ok on my Samsung BX2450 down the same cable no problems at all just the TV that has issues.
Any suggestions?
Cheers
ZeroGHi Cyberviper42,
I understand that you are seeing some issues with your connection to the internet on your computer. I have an article for you that will help you troubleshoot this issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
https://support.apple.com/en-us/HT202222
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?
I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
I truly appreciate any help I can get!
Thanks again... -
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
Maybe you are looking for
-
TV Receiver in Creative Entertainment Cen
Wouldn't a Digital TV receiver component in the Creative Entertainment Centre be a good idea? I don't have Windows MCE and I don't want to buy one as I don't want to have to reinstall my whole system just to get one new component. I have just bought
-
Drag and Drop in Item Renderer
I created an item renderer for use in a TileList. This item renderer shows a thumbnail, name, and a few buttons. I want to enable drag but only for the image. I know it is easy to enable drag for Tile List items as a whole, but how do I do that for j
-
User POV setup for Financial Reports
In FR 9.3.1, anyway that we can setup a list of POV members that applies to all the users by default. Currently, I have to login as each individual user and then setup the POV for each of them. Thanks in advance
-
How to add Activity Monitor to top Toolbar
The last step of most workflows is to Export. By that time, I grow a little tired and impatient. It takes time if you are exporting dozens of versions. How can I configure Aperture with the a button for Activity Monitor at the top?
-
In Oracle Where Error File Will Store When a Error Rise In Query Execution