Upgrade to lion not supporting powerpc apps

i have upgraded my os from 1.06 to lion and now I am not able to open my ms office anymore. I get an error message saying that the system is not supporting any PowerPC applications any more. what to do?

MDI_Maude wrote:
On a similar vein: I just installed Lion and 'lost' my Entourage email.
(1) Upgrade to MS Office 2011. Import Entourage data in Outlook 2011.
<http://support.microsoft.com/kb/2413370>
(2) Use Emailchemy to convert Entourage data for use with Mail.app.
<http://www.weirdkid.com/products/emailchemy/>

Similar Messages

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

After upgrading to Lion, not able to use Quicken 2007. Get the following message: PowerPC applications are no longer supported. Anyone has a solution?

After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?

Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
There are ways to do this however, try searching Google for: Installing Logic 8 under Lion or Mountain Lion.

PSE 8 install question for Mac PowerBook G4, "Does not support PowerPC architecture CPU..."

I am getting the following message during attempted install of Photoshop Elements 8 for my Mac PowerBook G4 (OS 10.4.11):
"This product does not support PowerPC architecture CPU. Please upgrade or adjust your system to meet these requirements."
I double-checked system requirements listed online before purchasing software, and also checked requirements listed on outside of box before opening it. All looked fine,
Searching Adobe help has turned up nada, any thoughts out there?
Thanks in advance,
Laura

Hi Laura,
I guess you must have missed something or misinterpreted something. Please check the requirements mentioned on the web page: http://www.adobe.com/products/photoshopelmac/systemreqs/
which clearly says that it needs an Intel® processor which means an iMac machine, Mac PPC are not supported in PSE 8 anymore.
Regards,
Ankush

HT4623 My iPad is operating on ios 5.1.1 and will not support certain apps which I want to download. I have checked for updates but it says that I have no updates

My iPad is operating on iOS 5.1.1 and will not support certain apps which I want to download as they say I require at least iOS 6. I have checked my updates and this says that I have the correct settings

Correct, the iPad 1 can not be upgraded beyond 5.1.1.

Error Message: "This upgrade path is not supported"

Scenario
During the process of upgrade to Windows 10 Technical Preview, we may encounter the error “This upgrade path is not supported. Please close Setup and re-launch from the root of the media or go back and pick a different installation
choice.” in the Compatibility report.
Analysis
Step 1: Perform the scenario 1: the upgrade installation fails.
Reproduce this error following the steps below:
Download the Windows 10 Technical Preview ISO installation file.
Extract the ISO installation file to C:\New folder, and now the location of the installation file is
C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\.
Click setup.exe from the installation file, and then click
Install now.
Setup is starting, and then get two options Upgrade and
Custom which is the classic setup wizard which we can see during booting from DVD.
Click Upgrade to run upgrade installation, however, the error occurs.
It seems that it is impossible to perform upgrade installation to Windows 10 Technical Preview, although it is fine to click
Custom to perform clean installation which cannot keep the personal setting and applications.
However, what we want is upgrade installation, not clean installation.
Step 2: Perform the scenario 2: the upgrade installation works fine.
If extract the ISO installation to C:\New in the above step2, click the
setup.exe from the installation file C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\, the upgrade installation would work fine, which is as shown the following two figures:
Step 3: Check the setupact.log
file which contains information about setup actions during the installation of the two scenarios.
Scenario 1: Check the setupact.log file of the scenario 1. The detailed information is shown as below:
2014-10-14 19:03:40, Info UI Determining whether we should run ConX or legacy setup
2014-10-14 19:03:42, Info UI Will launch ConX setup experience
2014-10-14 19:03:42, Info UI Launching ConX setup experience
2014-10-14 19:03:42, Info UI Launching C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
2014-10-14 19:03:44, Info UI Unknown command line for ConX setup experience. Launching legacy setup experience.
2014-10-14 19:03:44, Info UI Determining if we are in WDS/Unattend mode
2014-10-14 19:03:44, Info UI No need to hide autorun
2014-10-14 19:03:44, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-10-14 19:03:44, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-10-14 19:03:44, Info UI AppWindow has layout style 0
2014-10-14 19:03:45, Info UI NavWindow has layout style 0
2014-10-14 19:03:45, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-10-14 19:04:57, Info [0x0a018e] UI Passing command line parameter ("C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Scenario 2: Check the setupact.log file of the scenario 2. The detailed information is shown as below:
2014-10-14 19:08:04, Info UI Determining whether we should run ConX or legacy setup
2014-10-14 19:08:05, Info UI Will launch ConX setup experience
2014-10-14 19:08:05, Info UI Launching ConX setup experience
2014-10-14 19:08:05, Info UI Launching C:\New\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe
According to the two logs, we can get the following points:
In scenario 1, it would invoke the SetupPrep.exe in the source folder directly to perform an installation preparation. However, it failed to recognize the path
C:\New folder\9841.0.140912-1613.FBL_RELEASE_CLIENTENTERPRISE_VOL_X64FRE_EN-US\Sources\SetupPrep.exe. Then it would launch legacy setup.
In the scenario 2, Windows setup would be redirected to the ConX setup to perform upgrade installation automatically.
So, what is the difference of the scenario 1 and 2 to bring the different results of upgrade installation?
Workaround
Based on lots of testing, we find that if there is no space in the extracting location of the ISO installation
file, the upgrade installation would work fine.
What’s more, we can get the meaning of the two setup models in the setupact.log:
Legacy setup: it is same with setup from DVD boot.
ConX setup: it would check the compatibility and language UI for upgrade preparation, then perform migration and upgrade directly.
Additional Resource
From the release of Windows 10 Technical Preview, many users have installed and tested Windows 10 Technical Preview, we still hope more and more users would download and install Windows 10 Technical Preview for test, and provide
us your feedback.
Download Windows Technical Preview
http://windows.microsoft.com/en-us/windows/preview-iso
Download Windows Technical Preview for Enterprise
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-technical-preview-for-enterprise
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello,
I would guess that existence of a space in the folder name is what the issue is. Try removing the space from the folder name and see if works. New_Folder for example
Thanks, Darrell Gorter [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

I am using apple iphone 3g .not support facebook apps,how can supprt facebook apps in my mobile

i am using apple iphone 3g .not support facebook apps,how can supprt facebook apps in my mobile

Using this search tool:iOS Search. Find apps for your older iPhone or iPod Touch iOS 4.2.1 I found a compatible facebook app called Friends Planet 2. If you look carefully, I'm sure you can find others.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

Lion will not support PowerPC applications?

just loaded the Lion! Tried to open work documents and spread sheets and got this.
"You can't open the application Microsoft Word because PowerPC applications are no longer supported.
Almost all of busnesse is on word and excel!
what do i do?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion. (note: I'm not a TimeMachine user, so I don't know how to restore 10.6 from this medium)
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered, OS, programs, files, Windows etc all gone.)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

Imac purchased 6/07, when trying to upgrade says model not supported? have plenty of ram and free space? so what is not compatible in the model i have?

i purchased my imac 6/07 ... model 6,1 it has 4 gb ram and plenty of free space, also connected to time machine for backup. currently have latest lion os 10.7.4.
when i went to upgrade i get a model not supported message? what spec or device integral to my model is holding this back? can i get around this or am i just at a brick wall? would like to upgrade if possible? have a 2.33 ghz intel core duo processor, 4 GB 667 Mhz DDR2 SDRAM
anyone know what is going on with apple and this model, wife has last years mac mini and it's upgrade went off without a hitch
thanks !

Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
From what i've read elsewhere, your older model of iMac has a CPU and logic board that partially runs in 32 bit mode at times. Mountain Lion requires that they run Exclusively in pure 64 bit mode. Yours cannot be made to do that.
Hope this helps

PC Suite Upgrade : Phone (N70) not supported

Hi
Just upgraded to latest version of PC Suite and have hit problems. Prior to upgrade phone and PC were connecting fine with no problems.
Now when establishing connection between phone and PC receive following message :'PC Suite does not support the connected phone. PC Suite settings file is missing from the the phone. Switch off your phone, switch it on, and try again.' The phone then appears to connect but none of the PC Suite offers are available, presumably as the phone is not being supported. Switching the phone off/on makes no difference.
No other changes to the phone have occurred since the connection was ok, the only change is upgrade of PC Suite.
I am running Windows XP SP2, PC Suite 6.81.13.0, connecting via cable or Bluetooth yields same result, using N70 on Vodafone firmware V 5.0609.2.0.1 01-03-06 RM-84.
Have tried completely uninstalling PC Suite and reinstalling to no avail. Wondered if I needed to upgrade the N70 firmware and attempted to use the new Software Updater but this crashed.
Quite frankly I haven't got time to mess around trying all sorts of things so any help would be much appreciated.
All Best
Prasannavira

22-Aug-2006
10:28 PM
prasannavira wrote:
Hi
Have tried completely uninstalling PC Suite and reinstalling to no avail. Wondered if I needed to upgrade the N70 firmware and attempted to use the new Software Updater but this crashed.
Quite frankly I haven't got time to mess around trying all sorts of things so any help would be much appreciated.
All Best
Prasannavira
Hi - I have not experienced this problem before but there are things you can check to rule out certain possible causes.
From what I can remember when you upgrade PC Suite, there's an element of it which it installs onto the phone - was that done successfully ?
Also - it isn't 100% clear from your message, but I presume you're attempting to connect to PC Suite via Bluetooth - does your PC->Bluetooth work OK with other devices ?
If not this indicates you have a Bluetooth centred problem.
Next thing to check - can you connect your phone to your PC using the USB cable ? If so then this also points to a Bluetooth problem.
The fact that the software updater crashed is not a good thing - the update can only be done via USB and not Bluetooth - what message do you get when you try to do the Software Updater ?
If it's a Bluetooth centred issue, then make sure you redo the syncing process - it's wizard driven so should be quite easy to do.
Hope this helps.
Let me know how you get on.Message Edited by edwardquan on 23-Aug-2006
12:17 PM
Regards,
Edward

Mountain Lion not downloading in App Store.

Hi guys,
I've read countless threads and tried everything but I still can't seem to download Mountain Lion from the App Store!
It's currently in my purchases, but pressing the download button does nothing whatsoever. When I click download from the actual Mountain Lion page, I get a small icon in my dock which either says 'waiting..' or 'downloading..'
When it says downloading, nothing seems to happen.. and in my purchases page there is no progress bar. In fact, in my purchases it still has the download button despire having a progress bar below the dock icon.
I've tried connecting via ethernet to download it. I've checked my Mac specs and they're all ok. I've tried restarting everything and cancelling the download.
Can anyone advise me?
Much appreciated!

Apple - Support - OS X Mountain Lion - Contact Support
Apple - Support - Contact Apple Support

I have a lenovo tab but i can't download adube flash blayer on it its say your device dos not support this app plz i need help and thanks so matsh

I want to dawnload adube flash player on my device
But i can't downloadit its say your device dos not suppor this app
And my tab is lenovo @

What is the operating system on that device?

How can I open my Quikbook program! Lion apparently, does not support PowerPC applications.

I have quickbooks Pro 5 which does not open in Lion. These are my busines records so I
am anxious for a solution.

judiefromwinchester wrote:
I have quickbooks Pro 5 which does not open in Lion. These are my busines records so I
am anxious for a solution.
You will need to upgrade to Quickbooks 2012 for Mac

The firmware upgrade file is not supported on this hardware version MI424-WR Hardware Ver. C

Hello - I have been troubleshooting for quite some time a problem that only occurs on my wireless devices. 8 out of 10 times I fail to obtain a IP address from my MI424-WR. My connection to the device is successful, however, DHCP times out. I have connected to many other wireless routers in other locations in the last 4 weeks and have isolated my issue to my connection with my FIOS router. That is to say that when I am elsewhere I do not have this problem. I contacted support today, and the tech I spoke to was very nice and also clueless. What is the latest/current hardware ver of the MI424-WR Verizon is shipping? The tech said he could not tell me what ver the one he had in a lab was. If l log into the router under firmware upgrade I notice the message in my subject. I have had FIOS here with the same router since 9/2007. Any help would be apreciated.

That brings up something I have been curious about...could you see if this might work for you?
-First and foremost, log into the router
-At the top click Wireless Settings
-Go into basic security settings on the left and change the channel to 11 (yes, I know this doesn't work for all but please read on) and apply
-Now back on the left side menu choose advanced security settings, enter 802.11b/g Mode
---Honestly, most people should need G only by now, but choose what you need here (avoid mixed) and apply
-Go back onto the left menu and try advanced wireless settings again but this time choose "Other Advanced Wireless Options" at the bottom
-Change MTU to "manual" and enter in "1492" in the field it provides and apply
-Now at the top right go into advanced settings
-Click on the link for "System settings"
-In here UNCHECK the "Enable Logging" and "Low Capacity Notification" options and apply
I don't think they would be able to tell you which version is being shipped, because I am sure the new routers are coming with the new firmware and the old they send out first. But yeah, give that a shot and see if that does anything to help your wireless machines connect. I am kind of curious if that will change anything.

Upgrade to lion not supporting powerpc apps

Similar Messages

Maybe you are looking for