Upgrade to mountain lion from Mac OS 10.5.8

I have Mac OS 10.5.8 and want to upgrade to mountain lion. Do I have to upgrade to snow leopard first, and if so do I need to purchase it at a mac store?

You need at least Snow Leopard V10.6.8.  I suspect you can go from Leopard 10.5.8 to Lion, but I'm not sure.  If you can, you can buy Lion in the Mac App Store (if that's available to you under 10.5.8; maybe it's not).
Anyway, you can go from any version of Lion to Mountain Lion.  You can also go from Snow Leopard, but it must be at least 10.6.8.

Similar Messages

  • I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    MacBook Air (Late 2008 or newer) model number 2,1 or higher
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Xserve (Early 2009) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable DVD/USB stick to install using this free program.
    Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
    Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
    Mavericks is supposed to be released this fall, so you may want to wait.

  • After upgrading to mountain lion my mac is very slow?

    Hello
    After upgrading to mountain lion my mac is very slow
    It was starting in 10 seconds and shuting dow in 5 seconds and now it's taking more than one minute to start it or shut down it and everything is slow
    why????????/
    Thanks

    First, back up all data immediately, as your boot drive might be failing.
    Take these steps when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • HT3728 After upgrading to mountain lion, my Mac no longer sees the Time Capsule.  What am I doing wrong?

    After I upgraded to Mountain Lion, my Mac cannot access the data disk on the Time Capsule.  Who else is having this problem and have you been able to solve it?

    Bonjour PanicRev16
       I use Grapher 2D 3D on my early 2006 iMac, but I tried it on my wife's Macbook Pro with Lion then Mountain Lion : no problem with Grapher 2.1  3D gcx files, Grapher 2.3 loves them !
       You can try the 3D Grapher 2.1 files from the website  http://y.barois.free.fr/grapher/  and see the result on your Mac Mountain Lion.
       I updated Grapher documentation and bugs of this website on 15th december 2012 (Lion, then Mountain Lion).
      Au revoir,
    YB24

  • What happens when I upgrade to mountain lion from snow leopard?

    I currently have 2 partitions. my mac side and my windows 7 home side.
    If i upgrade to mountain lion from snow leopard will i be expected to reinstall bootcamp and windows7 home along with all my other windows programs?
    What happens to the partitions? do they stay the same or does the upgrade pretty much do a factory restore and make me start from square one again?
    I have a time capsule. but do not really know how to work it like its supposed to. i just really use it to store data that i do not need on my partitions at the current times.

    I do not have any knowledge about boorcamp but on my old MacBook with snowleapard,
    I was not able to upgrade to Mountain Lion Because of my hardware I think.
    And about tha bootcamp partition:
    there shouldn't be any problem with upgrading "if even possible" because the Mac partition
    can't edit the Windows partition.
    I hope this helps you, but I would do some more research befor upgrading instead of completely trusting on my advise.

  • Can I upgrade to Mountain Lion from Leopard for free?

    Hi Apple Support,
    I was in the Apple, Covent Garden store the other day and an assistant said that I could upgrade to Mountain Lion from Leopard for free in one CD. He told me to call a number which I did and the assistant over the phone had no idea about this offer.
    Can someone dispell the confusion for me?
    Thanks

    You can't. The Mountain Lion upgrade is only free for people who purchased a new Mac on or after July 26 without it installed, and all of the computers which fall into that category shipped with Lion, not Leopard.
    (70847)

  • If i upgrade to mountain lion from lion will i loose my pictures and music

    if i upgrade to mountain lion from lion willi lose my pics and music?

    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    http://www.apple.com/support/macbookpro
    Mac OS X Forum
    https://discussions.apple.com/community/mac_os?view=discussions
    This forum deals with a desktop/tower 65lb Mac Pro
    http://www.apple.com/support/macpro
    Save the installer for future use.
    BACKUP
    Use Lion Recovery Mode to repair your drive.
    Create a USB Flash Installer for Mountain Lion
    And -- check out the Lion/ML and MBP forums

  • Will upgrading to Mountain Lion from Lion make my Lion Time Machine Backups unusable?

    I had a situation where when I upraded to Lion from Snow Leopard, my Time Machine Backups became unusable. It says that the Backups were not compatible and it was really frustrating because I had to delete my backups from Snow Leopard and re-backup from my Mac with the newly installed Lion.
    Will this happen if I upgrade to Mountain Lion from Lion? Has anyone had trouble from this upgrade to Mountain Lion. Has your Time Machine backups been working fine with the new operating system?
    Thanks!!

    Will upgrading to Mountain Lion erase all my files? And can't I only backup my home folder from Time Machine anyways? As long as I don't use Migration Assistant to restore the System files.
    But yeah, will upgrading to Mountain Lion from Lion erase all my files and accounts?
    Thanks!!

  • After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

    after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

    Apple made some changes to increase security that slowed the boot time.
    Startup - Slow Boot
    Startup - Slow Boot (2)
    Startup - Slow Boot (3)

  • After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

    After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
    After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
    In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

    Well, I found the solution here in another thread.
    i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
    So I found the solution here.
    Thank you graphicsluc!!!

  • Thanks Neil. Though I have purchased Mountain Lion from Mac App stores before HD crash, this is not shown in the list of purchases.why?

    Thanks Neil. Though I have purchased Mountain Lion from Mac App stores before HD crash, this is not shown in the list of purchases.why?
    regards,
    [email protected]

    If you go to System Preferences > Network do you see other networks listed on the left panel?  Is the lock in the lower left corner closed?  If not, highlight your network, then close the lock so you block other networks.

  • I upgraded to mountain lion from snow leopard, now my photo studio software is no longer supported by powerpc. Does anyone know of a fix so my photostudio will work?

    I upgraded to mountain lion from snow leopard, but now some of my applications do not work, most specifically I would like to use my photo studio, but now it tells me that powerpc is no longer supported.  Does anyone have any fixes to this problem? I would really like to continue to use software that I already have! Thank you for your help!

    PPC software will not work in Mountain Lion because there is no longer any Rosetta emulator. You will only be able to run your older software by creating another partition on your hard drive on which you can install Snow Leopard. It need not be a large partition since you can still keep your files and programs on the main partition. You could also install Snow Leopard on an external drive from which to boot the computer.
    To resize the drive do the following:
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    After you create the new partition boot the computer from your Snow Leopard DVD and install Snow Leopard onto the new partition.

  • I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then  operational  speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

    I am a macbook pro user form last 2 yrs, recently i upgraded to Mountain Lion from Snow leopard. Since then  operational  speed is a major concern. Now It has crashed so very badly that I am scared of my data.Please help me.

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • If i upgrade to mountain lion (from lion), will i need to reinstall my windows VM? and what about my apps and other stuff? will those need to be reinstalled too?

    if i upgrade to mountain lion (from lion), will i need to reinstall my windows VM? and what about my apps and other stuff? will those need to be reinstalled too?

    I started off with problems about being in the wrong region and now  have Plug- in Failure
    I am trying to access Setanta Sports Australia which requires
    Microsoft Silverlight and was already pre-installed on a Macbook Pro Retina 2.5 ghz Intel core i5 with Mountain Lion 2.8.3
    I have these different PlugIns active :
    file://localhost/Library/Internet%20Plug-Ins/DivXBrowserPlugin.plugin/
    file://localhost/Library/Internet%20Plug-Ins/Flash%20Player.plugin/
    file://localhost/Library/Internet%20Plug-Ins/JavaAppletPlugin.plugin/
    file://localhost/Library/Internet%20Plug-Ins/QuickTime%20Plugin.plugin/
    file://localhost/Library/Internet%20Plug-Ins/Silverlight.plugin/

  • Can I upgrade to Mountain Lion from 10.6 on a 24" 2009 Imac?

    Can I upgrade to Mountain Lion from 10.6 on a 24" 2009 Imac? The instructions say my computer is capable. Do I have to go through Lion or Snow Leopard first?

    nope you can go right from SL to ML.
    Message was edited by: shldr2thewheel--oh wait, you can't go from 10.5.8 right to 10.8 since you need access to the app store.  I thought you already had 10.6 installed.

Maybe you are looking for

  • Lightroom 3 forgets catalog location

    Lightroom 3 on Snow Leopard forgets where my catalog is every time I restart my computer.  LR remembers just fine if I shut LR down and re-open it, but once I re-boot the computer I receive an error message saying it can't find the default catalog an

  • Defaulting DFF Segment Value using sql statement in SSHR gives error when using parameter

    Dear All, i am having an issue that i am making one segment in DFF (SEGMENT3) being defaulted by using sql statement Select MAX(SEGMENT7) FROM PER_ANALYSIS_CRITERIA cri, PER_PERSON_ANALYSES ana where cri.Analysis_Criteria_id = ana.ANALYSIS_CRITERIA_I

  • Garage Band in stereo?

    I am still at the beginner stage. I have recorded several tracks using M-Audio Firewire Solo. For some reason the final mix is only playing back in one channel. Why? And of course, how do I get stereo? I notice that mic input is one channel, guitar i

  • Jsp:forward  param

    Hi, when I forward the current jsp page to the target page, I wanna forward a parameter called "pageSource" along with it, so the target page could identify the previous page. In the target page I wanna use a SWITCH statement for further processing.

  • Error : the class does not match the class of the persisted object

    Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. H