Upgrade to OS X 10.3.9 from 10.2.8

Hello,
I currenlty have a Mac Power G4, version 10.2.8, and want to upgrade to at least version 10.3.9. I found the updates to verions 10.3.1 and to 10.3.9 on the apple web-site. However, whenever I try to install them, I am told that I must have version 10.3 before I can go on. But...this is exactly what I am trying to do...I am trying to get 10.3 (actually 10.3.9).
Can you help me?
Thanks,
BrianMT

Hi BrianMT! And Welcome To Discussions!
A bit more,
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the 10.4.7 Combo Update.
Panther System Requirements
Tiger System Requirements
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The order Form Here. Media Exchange Program
Shop Carefully, Examine All Documentation, And Good Luck!
ali b

Similar Messages

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

Problem: this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!

fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Steps to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...

Hi,
Can you please suggest the steps to follow to upgrade to 10.1.3.4.1 from 10.1.3.4.0 in Linux...
Thanks in advance.

when u try to install it will give u a option to upgrade or install when you click the upgrade it will guide you

Pages tells me I need to upgrade to 5.0 to open documents from iCloud. When I go to the mac app store it says pages 5.0 is installed, but Pages says it's running 4.3. I just want to open documents on my mac that were created on my iPad.

Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade. when I check the version of pages I am running it says 4.3. I just want to be able to open documents on my mac that were created on my iPad. How can i get Pages 5.0?

Welcome to Apple Support Communities
You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

How do I upgrade elements 10 to open raw files from my Canon 70d?

How do I upgrade elements 10 to open raw files from my canon 70d?

Normally, if there are any updates for your version of PSE then they should be offered to you automatically. However, you can also check if there are any new updates by going to:
Help >> Updates
If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market. We are currently at version 13 so version 10 was stopped long time ago. However, you can see a workaround at this link where I posted a video to get things moving:
<Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
Hope this helps.

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4

I have Mac os x with 10.4.11 and i want to upgrade, what is the next operating software from a 10.4.11 for a g4 and can it be done on a g4

If you have a processor of 867 MHz or faster and a minimum of 512 MB of RAM, you can run OS X Leopard, updated to 10.5.8.
That's as far as a G4 can go.
Check eBay for discs:
http://www.ebay.com/sch/i.html?_nkw=Mac+OS+X+10.5+Leopard+Retail&_sacat=0&_odkw= Mac+OS+X+10.5+Leopard+Full+Retail&_osacat=0
No Snow Leopard, 10.6x or Lion, 10.7x.
they won't run in a PPC Mac.

Itunes lib show app, but won't install to iPhone I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappear

I upgraded fro iphone4 to iphone5. i restored from backup in iCloud, and almost everything is there perfectly. there was one app on the phone, which i clicked on to finish the install, but it then disappeared. in my iTunes, under library/apps, this app still shows there. how do i reinstall this app. it was a paid app, and i searched the app store, and apparently it is no longer there.
any help would be greatly appreciated.

It appears to be fixed, he had multiple versions of iTunes installed (since he put his iTunes in a different folder) the iTunes icon launched the old iTunes, even though the new was installed. it's working now.

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?

I want to upgrade the IOS of my Cisco 2821 from Version 12.4(11) to v 15.1 (XB), but I have CCME v 4.2 (0), is there any problem if I only upgrade the IOS and leave the CCME as it ?
Thanks

CME is part of the IOS, so you can't upgrade the IOS seperately from CME.
That said, if this is a production environment you should proceed with caution and be prepared to roll back as you may find bugs, etc.
You should also look at release notes and make sure your phone firmware will still work or needs to be upgraded too.
Brandon

Upgrading to CS6 Design and Web Premium from CS4 Design Premium Install Failure

I am trying to upgrade to CS6 Design and Web Premium from CS4 Design Premium on Win 7 (32bit). I am nistalling from the DVD which was purchased from the Adobe Store. The box says it is for Upgrading from 4 or 3x. I am entering the CS6 serial number and it is able to validate it. When it goes into the Preparing to Install mode the status bar never changes and after what seems like a very long time the Installation failed message is displayed. I ran the Adobe Support advisor and followed the link to the page that tells you how to resolve the issues and chose to go into the registry and look for "In Progess". There was no "In Progress". I have the serial numbers for CS4 and CS6 so they should be valid given that both were purchased through the Adobe Store. I am very frustrated!!!!!!!!!
Installation Status:
Installation failed:
Adobe Advisor Results:
Regestry:

I downloaded and installed the Application manager and re-started the installation. This time it got to installiing the applications and after 3 hours it was only 55% completed and showing that it was installing Acrobat and had 2 hours to go. It seemed to be stuck so I cancelled the install.

HT1414 My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(&don't have recovery disc). What do I do now?

My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(& I don't have recovery disc available). What do I do now?

Try using another computer. I had the same problem, repeated the given solution many times and each time it failed. Then I connected ipad to another computer and it worked immediately. Then I used the first computer to restore a backup.

Lost calendar data after upgrade to OS X 10.10.3 from 10.10.2

Using MacBook Pro 13 inch Mid 2009, Processor: 2.26 GHz Intel Core 2 Duo, Memory: 8 GB 1067 MHz DD3; Graphics: NVIDIA GeForce 9400M 256 MB
Upgraded to OS X 10.10.3 from OS X 10.10.2 and lost all data appointments, etc in Calendar.
Tried retrieving calendar from Time Machine, but unable to recover as part running system.
What do I do to retrieve data? All my medical appointments are on this calendar.
Please help.

I found that is a hardware problem, because the 9600MGT didn't shown when I reinstall OS X Lion 10.7.4.
It seems that I have to buy a new one

CC&B 2.1.0 upgrade of use of Microfucos visual cobol from net express

Would there be any issue of upgrading the use of Microfocus Visual Cobol from Net Express?

starfry wrote:I don't know if it's related to your problem but GPG2.1 doesn't allow pass phrases to be specified in a file or on the command-line. See the page on unattended operation, look at "%ask-passphrase" and "%no-protection" https://www.gnupg.org/documentation/man … ation.html
Thanks for the link - that's only for gen-key, however. But I do confirm the "--passphrase-fd 0" is supposed to still be working as described in the current docs:
https://www.gnupg.org/documentation/man … ic-Options
--passphrase-fd n
Read the passphrase from file descriptor n. Only the first line will be read from file descriptor n. If you use 0 for n, the passphrase will be read from STDIN. This can only be used if only one passphrase is supplied.
So in theory the functionality hasn't changed. :-/

After upgrading to 6.1.3 yesterday photocamera from iphone 4 not focus. why? please fix bug!!!!

After upgrading to 6.1.3 yesterday photocamera from iphone 4 not focus.Whi ? please fix the bug !! and the battery is draining faster !!!

This is almost embarassing. For some totally unexplainable reason all the songs in iTunes were unchecked. I was considering syncing the whole iTunes library to my iPnone, tut even with the 32 Gb version it would not hold it all. I restarted my MBP, and the message about the unchecked songs came up. It obviously is not enough to have songs checked for the iPhone. Thanks anyway.

How do I upgrade this P.O.S. ipod 2g from crappy 2.2.1?!?!?!?!?!?!?

how do I upgrade this P.O.S. ipod 2g from crappy 2.2.1?!?!?!?!?!?!?

It is a first gen ipod touch.
You can purchase 3.1:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."

I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."

If you still have the old computer and it is a MAC, the Lightroom 5 serial numbers are in a text file.
users/"username"/Library/Application Support/Adobe/Lightroom/Lightroom 5.0 Registration
More info here
Preference and other file locations in Lightroom 5

Upgrade to OS X 10.3.9 from 10.2.8

Similar Messages

Maybe you are looking for