Upgrade to PI 7.0 Ehp 2

Hi PI Gurus,
Need your suggestions on upgrading to PI 7.0 Ehp 2 from PI 7.0
What precautions/changes need to be taken from PI Developer perspective after/before migration ?
Thanks,
Jaydeep

Hi,
I don't know of any specific issues connected with such an upgrade, but as with all upgrades/patches you should test all your scenarios thoroughly before patching you production environment.
Take special care of testing any special features you have implemented, such as lookups, UDFs, encryption, XSLT, etc.
Hope this helps.
Br,
Kenneth

Similar Messages

  • Upgrade from ECC 6.0 EHP 4 to EHP 7.0 influence on SRM Add-On

    Hi everyone,
    We want to upgrade our ECC 6.0 EHP 4 to ECC 6.0 EHP 7. We are currently running SRM 7 EHP1 as ERP Add-On in the one-client scenario.
    I have read the EHP7 Upgrade/restriction note also as the SAP Note 963000 - Usage and release of SRM as AddOn to ECC in ERP 6.0
    But i did not find the information if we have to upgrade our SRM 7 EHP 1 to EHP3.
    Please make this clear for me.
    Best regards,
    David

    Yes, you will need to upgrade the SRM system to EHP3.
    1951805 - Adjusted Version Interoperability for Business Suite 7i2013
    1388258 - Version Interoperability within the SAP Business Suite
    You can make use of the UDA tool to confirm this.
    http://service.sap.com/uda
    As you are upgrading the ERP system to EHP 7 which is based on NetWeaver 7.4 you will need to upgrade the other systems like SRM, BW to a supported release.
    Regards
    RB

  • Question about upgrading ECC 6.0 to EHP 4 and NW 7.0 to EHP 1

    Hi All,
       I have read articles about installing Enhancement Packs. How ever I am a little confused.
    We are currently on ECC 6.0 and NW2004s. For Portal also we are on Nw2004s (EP 7.0 SP 16)
    We want to install EHP4 for our ECC system. Do we have to install EHP1 for our NW side? Does this mean we need to upgrade our portal also to EHP 1?
    Also, do we need to update our ESS and MSS business packages also?
    I have an OSS note open about a VC issue. They have recommended us to upgrade to SP 18. if we install EHP 1 on Portal, do we still need to upgrade to SP 18 or all previous SPs are included in EHP1?
    I really appreciate your help on this. If you can refer me to some docs which give more detail on EHP 1 for NW, I will greatly appreciate it.
    Thanks in Advance
    Preet

    Hai,
    Check the below link.....
    SAP Enhancement Package 1 for SAP NetWeaver 7.0
    /docs/DOC-7741#section4 [original link is broken]
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Feb 7, 2009 1:06 PM

  • EHP 7 upgrade - Got stuck at Pre-processing - urgent help required

    hi Everyone,
    I am upgrading my current ECC 6 EHP 6 system to EHP7. I got stuck in the Pre-processing phase "imports included Add-on and Support Packages into the shadow tables and the new tables". there is no error but it is runnign for more than 15 hours now. i dont even see a latest log showing its progress. The logs got updated 14 hours ago and there is no update after that.
    The shadow instance was down. Main instance is up and running and no Jobs running. I manually started the shadow instance and checked if that will help . but no use. so restarted the SUM tool. it gives a different problem now. I have listed out the current probelms below. please check and advise
    1. SUM tool shows, "ABAP- Starting handshake" - SAPUP.Out erro message (ERROR in GUI communication: Error in network interface: NIEINVAL (0/53 written))
    2.Shadow instance up and running but while trying to login from GUI,it says "rabax during SAPGUI logon". i can see all its WP in 'waiting' status at the OS level
    3.in DB02, "oldest Open Transaction" shows Aug 15 2014 10:30 PM, which means this transaction is there at the DB level for more than 16 hrs now.
    Please help trouleshoot and resolve this. useful inputs will be rewarded immediately
    thanks,
    Shiv

    I have resolved the 1st issue, after killing the SAPup process at os level.
    now, in the SUM tool, it gives the following info,
    Type                    |Name                          |ProcessID|Description
    =============================================================================
    Operating system process|E:\usr\sap\<SID>\SUM\abap\exe\tp|5144     |
                            |"pf=E:\usr\sap\<SID>\SUM\abap\va|         |
                            |\SHDALLIMP.TPP"               |         |
                            |put <SID> "-Dmainimp_proc=2"    |         |
                            |"-Dparallel=2"                |         |
    If additional processes are still running or background jobs are active, the
    program *must* wait for them before it is able to continue.
    Be careful with stopping any process. If a background job is scheduled but not
    running, delete this job using transaction SM37.
    01)  -  Exit program
    02)  *  Check status again
    03)  -  Processes do not exist, continue
    04)  -  Wait for processes to finish
    : Check status again
    TP program is running at OS level. but as already said, no background job runnig in Main instance and the shadow instance was already down. shal i kill this TP process and try with option 03) ?
    please advise
    thanks,
    Shiv

  • MSSQL 2008 - Database size getting smaller after EHP upgrade??

    Hi All,
    Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
    In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
    EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
    Any idea?
    Cheers,
    Nicholas Chang

    > Right after upgrade is smaller and after sgen, db size is bigger than source.
    So it's ok.
    > As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
    If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
    Another reason may be that index compression was activated:
    Note 1459005 - Enabling index compression for SQL Server
    You could now upgrade to SQL Server 2008 R2 and apply
    Note 1488135 - Database compression for SQL Server
    this will save additional space (30 - 50 %).
    Markus

  • EHP 7 upgrade & Mopz in Solman 7.1 SP 8

    Hi Everyone,
    I am currently working on EHP 7 upgrade for my ECC 6 EHP 6 system. I began my work in ECC with SLD data push and SMSY, LMDB config, in Solman now moved on with MOPZ config to download EHP SPS. I have a query here, is it important to have the entire system data updated with SMSY and LMDB in Solman? i understand that MOPZ checks the current system Patch level from SMSY/LMDB and based on our target selection it calculates and recommends. just wondering how exactly it happens!. Bacause we have our BO system and few other non SAP systems in the landscape that are not updated with the SMSY/LMDB but they also should be considerd for the upgrade to check if there are dependencies.
    so my question is, do we have to push data from non sap also and maintaine in SMSY and LMDB before we perform EHP SPS download from MOPZ?
    other question is, if we perform upgrade in a ECC Sandbox environment (usually a copy of Production), it is not necessary to have sandbox for Portal, PI and other systems. so what is the recommended approach here? do we have to select the Developement  ECC system from MOPZ so that we will have other Dev systems (PI, Portal.,..etc) present in the SMSY & LMDB and MOPZ recommendation will be perfect?
    please help me understand this
    Thanks,
    Shiv

    Instead of reviewing SMSY, you should switch over to the LMDB as it is the future for system data in SolMan.
    The reason its telling you ERP 6.0 SPS25 is because it is not taking into account your Ehp, SAP still has to support customers who haven't taken the Ehp (perhaps unicode issues, 32 bit to 64 bit, etc) so this is a way to compare.  I found a bar graph that explained this in a very simple picture, however I can't find it online and leads me to believe I read/saw it in a book.  Also think of this my company is currently updating ECC from Ehp 5 SPS 4 to Ehp7 SPS 4, the SPS are the same due to the Ehp change and resetting the SPS counter back to 0, but in mopz I believe it shows SPS 28 or 29 for ECC 6.0; so essentially there is nothing you can or need to fix for the system data.  If this is still confusing I will try to track down the bar graph example I saw.
    As for logical components you can create your own (and is advised to do so as SAP could remove entries on you during a SolMan upgrade) so you could list it as z_ERP or zEhpERP or z_ECC; however it makes sens to you and your co-workers/customer, when you manage the system and the button that allows you to configure the system, the first section in the new window stays red until you assign a logical component to the system.  So you might already have something assigned to the system(s).
    SAP doesn't list it as BO, and I'm not sure if you can run a successful mopz on BO systems; if you leverage the PAM at SAP you can track down dependencies.  I also believe Process Orchestration is only 7.3/7.31/7.4 which is compatible with Ehp 7.
    SAP PAM:  http://service.sap.com/pam
    As for BO, do you have the following under the SWDC?
    Installations and Upgrades - B" SBOP BI platform (former SBOP Enterprise)" SBOP BI PLATFORM (ENTERPRISE)" SBOP BI PLATFORM 4.1

  • Upgrading to EHP Initial Shipment in Solution Manager

    Hi,
    We have solution manager SPS 17
    We wanted to upgrade to SPS18, which is EHP initial shipment
    I donwloaded the BASIs 701 file, ABAP701 etc
    when i try to install the component , i says the following message Please help
    BBPCRM, Component BBPCRM,* must not be installed*
    I could not find anything with name BBPCRM 5 in service market place
    Please  guide

    Hi,
    The issue you describe can
    usually be attributed to a missing ACP. SAP_BASIS 701 SP02 SAPKB70102
    should bring an ACP package to the EPS inbox. This ACP package should
    solve the issue. Please check whether CSR0120031469_0032562.PAT
    is in your EPS inbox. If it is not, please download this SP and
    disassemble it in order to get CSR0120031469_0032562.PAT into
    your EPS inbox. Please also check note 1169247 under "6. Performing the
    upgrade" whether all necessary packages are part of the queue if
    SAPKB70102 has indeed been missing up to now.
    Please try adding till at least SP03 of all Netweaver components in the queue.
    Regards,
    Aidan

  • Mapping changes while upgrading from PI 7.0 to PI 7.31

    Hello Experts,
    We are upgrading from PI 7.0 EHP 2 to PI 7.31 SP 14 , Dual stack only.
    While migration, there are some doubts related with mapping, which are not getting cleared even from going through various blogs like:
    Migration Woes?
    PI/XI: PI 7.1 upgrade/migration - Message Mappings
    Below are my doubts:
    As there are mapping changes for IFS, IFSWITHOUT ELSE & Context functions, so exactly what these changes are and how would this work, how can we identify & rectify in all the mappings?
    What changes to be performed for Java mapping & XSLT mapping?
    Are there any changes for ABAP proxy?
    Any help is appreciated
    Many Thanks!!!

    Hi Lisin,
    You need to change in Java mapping accordingly and compile in jre1.6 as many methods used in older version are obsolete now.
    You need to write transform instead of execute which was used for PI 7.0
    public void transform(TransformationInput in, TransformationOutput out) 
                   throws StreamTransformationException { 
    You can easily write the code again in message mapping as discussed:
    Write Java Mapping directly in ESR!
    For XSLT mapping, the older version will be supported as the execution is done using SAP XML Toolkit which is supported in higher versions also.
    XSLT Mapping - Managing Services in the Enterprise Services Repository - SAP Library
    ABAP proxy will be as it is if you are going for classical scenario as you will be using 7.31 Dual stack.
    But if you want to go for AAE Integrated Configuration, you need to do required configuration changes in ECC for outbound Proxy:
    Proxy to file scenario using AAE - with full configuration
    I am not sure whether you need to change in Graphical standard mapping for those functions which are already there in PI 7.0.
    Regards,
    Suman

  • Enhancement Pack Upgrade and Portal Implications

    Hello Everyone,
    We are currently on EHP 4 and running EP/Portal 7.00 SP30 and are planning to upgrade to EHP 6.  Is there a need to upgrade EP when upgrading the SAP landscape to EHP 6?
    We are treating the EHP 6 upgrade as a technical upgrade.  Thus the existing ESS/MSS functionality that we have will remain as Java Web Dynpros.  We are also not planning on implementing HR Renewal with the upgrade.
    Thank you for the help.
    Best Regards,
    Scott

    Hi Scott,
    You wont be having any issues if the SP Level of you EP/Portal 7.00 is 30.
    Please check the note 1496212.
    According to the note if your SP level is less than 18 then you have to upgrade it to 30.
    Your ESS/MSS business Packages will remain the same and for HR Renewal you can deploy its latest Businesspackage.
    We had a similar situation and now, we have successfully implemented latest ESS (in WebDynpro ABAP) and MSS (MSS ADDON) in our old portal 7.00 SP 27 (Backend Upgraded to ECC6 EHP 6)
    Regards,
    Suman

  • EHP2 - EHP7 Upgrade Path using SQL Server 2012/Win Server 2012 R2

    Hi Guys.
    I have question regarging Upgrade Roadmap for a ERP 6 EHP2 system based on NW 7.01 which I would like to Upgrade to ERP6 EHP7 SP7
    Source System is
    Windows 2012
    SQL Server 2008 R2
    EHP2 for ERP 6.0 SPS Level 14
    Target System
    Windows 2012
    SQL Server 2012
    EHP7 for ERP 6.0 SP 7 based on NW 7.4 SP 9
    During Upgrade checks it says I must Upgrade Database first before continue since DB Release is too low for NW 7.4 SP9 as stated in Note
    1951491 - Minimal DB system platform requirements for SAP NetWeaver 7.4 SP08
    So, at this point I agree i have to update SQL Server to 2012 before next step
    Now, my concern is that my Source System does not have the minimum NW SP level (14) to run under SQL Server 2012 which is 26.
    Im currently running SAP Kernel 721 EXT Level 401 which is above mininum
    According to Note 1651862 - Release planning for Microsoft SQL Server 2012 that would not be possible
    Existing systems of SAP products that are out of SAP maintenance can be upgraded to SQL Server 2012 in order to prepare a SAP upgrade, if they match the SAP NetWeaver Support Package requirements defined below.
    SAP products prior to SAP NetWeaver 7.0 are not supported at all on SQL Server 2012.
    Required minimum SAP Netweaver Support Package Stacks (SPSs) for SQL Server 2012 (SAP ABAP, SAP ABAP+JAVA stacks)
    SAP NETWEAVER 7.0 - SPS 26 (SAP BASIS 26, SAP BW 28)
    SAP EHP1 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
    SAP EHP2 FOR SAP NETWEAVER 7.0 - SPS 11 (SAP BASIS 11, SAP BW 11)
    SAP EHP3 FOR SAP NETWEAVER 7.0 - SPS 03 (SAP BASIS 03, SAP BW 03)
    SAP NETWEAVER 7.1 - SPS 14 (SAP BASIS SP14)
    SAP EHP1 FOR SAP NETWEAVER 7.1 EhP1 - SPS 10(SAP BASIS SP10, SAP BW SP10)
    SAP NetWeaver 7.2 - no restriction
    SAP NETWEAVER 7.3 - SPS 07 (SAP BASIS 07, SAP BW 07)
    SAP EHP1 FOR SAP NETWEAVER 7.3 - SPS 03 (SAP BASIS 03, SAP BW 03)
    If your system is running on a SPS lower than the one required above, you have to apply the minimum required SPS before upgrading/migrating to SQL Server 2012.
    If you install a NetWeaver product on SQL Server 2012, the required SPS for your product must be applied immediately after the installation - see SAP note 1676665, section I for more information.
    But performing the Upgrade would be technically possible? I mean not for productive use but technicaly during that time the Database is Upgrade and during SUM Execution.
    According to the note it states if you install a Netweaver Product in SQL Server 2012, SPS must be applied immediately, so is kinda ambigous what SAP is saying.
    Best
    Martin

    Hi Martin,
    For a test scenario, there's no harm in trying it (other than spending a lot of time on it, but hopefully that will prove not to be a waste). Generally, I expect you'll be fine upgrading your DBMS even though you aren't on the required minimum SP yet. The main thing you'll be missing out on is the updates to DBACOCKPIT, but once you do your EhP upgrade (with sps update included), you'll be putting that in place.
    So, you could try this on your sandbox system and see if there are any problems. I assume the intent is to start the EhP upgrade as soon as the DBMS upgrade is done, right? In other words, you won't be actually using the system without the required SP except to run the EhP upgrade?
    Alternatively, you could do a minimal support pack update, perhaps just a Basis SP only, to the minimum SP needed for your current release, then do the DBMS upgrade, then proceed with the EhP upgrade. This would be the safest procedure, but, as I said, I expect you can probably get away without going to this level without much problem. Again, the idea would be minimizing the time between the start and end of the total project on each system (DEV, QAS, PRD, etc).
    Regards,
    Matt

  • Compatibility between SAP ERP upgrade with SAP PI 7.3 sp12

    Hi Experts,
    Our SAP ERP system getting upgraded to ECC 6.0, ehp 7, SS7 and we need to check its compatibility with the current SAP PI version(7.3 sp09) and its future upgraded version which is sp12.
    Would any one kindly help me to track the PI system compatibility with the ERP upgraded version and its adverse effect(if any) on interfaces between PI and ECC system?
    Thanks
    Navneet.

    Hi Navneet
    If your PI is already on 7.3, it is compatible with ECC6 EHP7. For more details refer to the SAP note that is mentioned in my reply on the thread below.
    Compatibility between PI 7.11 and Ehp7 for ERP6
    Rgds
    Eng Swee

  • CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

    Hello,
    What are the  compatibility issues for EHP4 FOR SAP ERP 6.0  Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
    Following are the System Details:
    Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
    Component: SAP_APPL 
    Release:      604
    Support Pack: SAPKH60402
    Level:  0002
    Existing CRM 5.0
    Component:     BBPCRM
    Release: 500
    Support Pack: SAPKU50006
    Level: 0006
    Thanks,
    AG
    Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • EHP installer - could not connect to JSPM

    This is EHP upgrade on PI.
    Using EHP installer prepare went thru fine for Abap, while during the java in the configuration phase, it updated the JSPM to the latest.
    JSPM works fine if we use it in standalone mode (like ./go).
    But in the EHP installer during the DETERMINE_APPLICATION phase it tries to connect to JSPM tool with the port 6250 (We have tried different port numbers and also tried the ports which are listening) and errors out saying that "connection to could not be established. Could not connect to host xxxxxx on port 6250..connection refused.
    Port 6250 is not assigned to anyother application.(checked with netstat -an)
    Please suggest.

    Hi,
    I am also facing the same problem at downtime stage
    Could not connect to host on 6240.
    I have got an error at downtime stage as per OSS note: 1399846 i followed the steps at step 5 i got an error that
    Connection to SAPJup could not be established, see following messages. Could not connect to host ttcsap05 on port 6240. java.net.ConnectException: Connection refused java.net.ConnectException: Connection refused
    i checked the port under netstat the port is allocated to some other.
    So, i have changed port no. as 5xx17 at files  sapjup.xml, jspm_config.txt, sapjup.xml then also no use.
    Please help me in this.
    Thanks & regards,
    Arun

  • A002 Relationships in EHP 5

    The company I work for is going through an upgrade soon to ECC 6 EHP 5.  We've recently been told that A002 relationships will no longer be available in EHP 5.  Is this correct? Please advise. Thanks!

    Who told you this? A002 will still will be used/supported. Could you imagine all those SAP customers having to change existing configurations if it was no longer used.
    Cheers,
    Brad
    Edited by: Brad Krahe on Jun 29, 2011 5:04 AM

  • EHP7 Upgrade and BW Upgrade at the same time - possible?

    Hello everyone,
    we are currently planning to upgrade our ERP system from EHP 5 to 7 and BW from NetWeaver 7.3 EHP 1 to 7.4. NetWeaver and Kernel will also obtain an upgrade.
    Is it possible to do the ERP and BW upgrades in one business downtime or are there any best practices which are recommended?
    Regards,
    Tobias Prein

    Hi Tobias,
    Is it possible to do the ERP and BW upgrades in one business downtime
    Technically it is possible. You can have 2 different set of basis team working on each of these upgrades.
    AS per best practise
    Upgrade has to be done first on a copy of Production system ( to identify potential issues which may appear on Production). This will be followed by dev, QAS and finally production.
    Regards,
    Deepak Kori

Maybe you are looking for