Upgrade to PI7.1 is for ABAP only?

I notice that the upgrade guide for PI7.1 did not say how and when to execute SAPJUP.
Does this mean above upgrade is for ABAP only?
Please help. Thanks!

Hi,
I am not sure which guide are you checking. But check this guide SAP Enhacement Package Installation (SAPehpi)-ABAP+JAVA.pdf. This contains information for both Java and ABAP.
Check this link https://websmp104.sap-ag.de/~sapidb/011000358700005412772005E.pdf
Hope it helps.
Thanks
Sunny
Edited by: Sunny Pahuja on Jul 7, 2009 12:40 AM

Similar Messages

Introscope Host Agent for ABAP only instance, fails with java.lang.NullPoin

Hello,
I'm trying to configure the Introscope Host Agent Adapter for ABAP 7.02 instance.
Solman Version is 7.1 ST 4, BASIS SP9.
I did created the Trust relationship between DAA and hostctrl and
also the same setup working find for Java Instance or ABAP+java Instance,
I'm not sure whether IS Adapter can be installed for ABAP only Instance.
Log file from Solman:
java.lang.NullPointerException
at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:119)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setJCoUserAndPwd(AgentConfigWriter.java:1085)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setLogonData(AgentConfigWriter.java:1075)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.createJcoDestinationVO(AgentConfigWriter.java:677)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.prepareSapAgentConfiguration(AgentConfigWriter.java:284)
at com.sap.sup.admin.wily.hostagent.Setup.setupAgentConfiguration(Setup.java:272)
Thanks
Srikanth M

Hi
I am sure, it is logically incorrect, how you deploy byte code agent in abap only instance
Introscope Bytecode Agent runs on managed systems based on J2EE engines to report data to the Introscope Enterprise Manager, so it has to be setup only for Java Stacks.
Please check with the wily config guide again.
I am watching this thread for further view from others.
Thanks,
Jansi

How do I populate 0CCMSATPH for ABAP only instance

Hi All,
I have inherited a SAP Solution Manager installation and I am trying to configure the system correctly.
In an Early watch report for one of our ABAP only systems (ERP6) it states
Reading performance data from BW returned neither data nor an error code. A timeout may have occurred.
Infocube: 0CCMSMTPH used in section 'Workload Overview <SID>'.
So I determined that this related to End to End Analysis and configured SOLMAN accordingly and am now getting data for SOLMAN itself in this cube but nothing else. I also determined that the Extractor WA (STATISTICAL RECORDS SECONDARY EXTRACTOR-0CCMSATPH) from Extractor FWK Administration is responsible for this data.
So my question is this, where does this extractor come from as I don't appear to have this extractor for the ABAP system it's complaining about?
SMS uses SMDAgent but that's because it's a dual stack system but for an ABAP only system surely this isn't required, if this is where the extractor comes from?
Also a related issue, in the log for this extractor for SOLMAN it has the following message "DL: Warning: Component not found in Target Structure:0INFOPROV". What is this and should I be concerned?
Thanks
Craig

Does this topology/configuration make sense? Yes.
To set up "agent only" instance:
1] Install MDEX,
2] Install PlatformServices (answer N for running EAC),
3] On Central server update AppConfig.xml (add definition for new dgraph),
4] On Central server "runcommand.sh --update-definition"
5] Install Deployment Template by running deploy.sh (answer N for integrate with Workbench),
6] Start ECA, which starts dgraph - $ENDECA_ROOT/tools/server/bin/startup.sh (Make sure you don't have eca.xml in $ENDECA_CONF/conf/Standalone/localhost)
7] On Central server "initialize_services.sh",
8] On Central server "runcommand.sh DistributeIndexAndApply"
Is the agent only server suppose to also have Workbench and/or our application (configuraitons)?No and no.
How does the Control server know there is another instance which is running with just an EAC agent?The AppConfig.xml on the Central server instance needs to be updated. Don't use the Workbench EAC admin console to do this. Only use that interface for stop/start and monitoring. Any permanent config changes you should make to AppConfig.xml by hand.
How is the dgraph process on the agent only instance started?$ENDECA_ROOT/tools/server/bin/startup.sh
How do I "turn on" an EAC agent only instance/server?
Edited by: EndecaJoe on Nov 9, 2012 8:55 AM

Reducing time required for ABAP-only copyback (system copy) process

Our company is investigating how to reduce the amount of time it takes to perform a copyback (system copy) from a production ABAP system to a QA system. We use a similar process for all ABAP-only systems in our landscape, ranging from 3.1h systems to ECC6.0 ABAP-only systems on both DB2 and Oracle database platforms, and the process takes approximately two weeks of effort from end-to-end (this includes time required to resolve any issues encountered).
Here is an overview of the process we use:
u2022     Create and release backup transports of key system tables and IDu2019s (via client copy) in the QA system to be overwritten (including RFC-related tables, partner profile and IDOC setup-related tables, scheduled background jobs, archiving configuration, etc.).
u2022     Reconfigure the landscape transport route to remove QA system from transport landscape.
u2022                    Create a virtual import queue attached to the development system to capture all transports released from development during the QA downtime.
u2022     Take a backup of the target production database.
u2022     Overwrite the QA destination database with the production copy.
u2022     Localize the database (performed by DBAu2019s).
u2022     Overview of Basis tasks (for smaller systems, this process can be completed in one or two days, but for larger systems, this process takes closer to 5 days because of the BDLS runtime and the time it takes to import larger transport requests and the user ID client copy transports):
o     Import the SAP license.
o     Execute SICK to check the system.
o     Execute BDLS to localize the system.
o     Clear out performance statistics and scheduled background jobs.
o     Import the backup transports.
o     Import the QA client copy of user IDu2019s.
o     Import/reschedule background jobs.
o     Perform any system-specific localization (example: for a CRM system with TREX, delete the old indexes).
u2022     Restore the previous transport route to include the QA system back into the landscape.
u2022     Import all transports released from the development system during the QA system downtime.
Our companyu2019s procedure is similar to the procedure demonstrated in this 2010 TechEd session:
http://www.sapteched.com/10/usa/edu_sessions/session.htm?id=825
Does anyone have experience with a more efficient process that minimizes the downtime of the QA system?
Also, has anyone had a positive experience with the system copy automation tools offered by various companies (e.g., UC4, Tidal)?
Thank you,
Matt

Hi,
> One system that immediately comes to mind has a database size of 2TB. While we have reduced the copyback time for this system by running multiple BDLS sessions in parallel, that process still takes a long time to complete. Also, for the same system, importing the client copy transports of user ID's takes about 8 hours (one full workday) to complete.
>
For BDLS run, I agree with Olivier.
> The 2 weeks time also factors in time to resolve any issues that are encountered, such as issues with the database restore/localization process or issues resulting from human error. An example of human error could be forgetting to request temporary ID's to be created in the production system for use in the QA system after it has been initially restored (our standard production Basis role does not contain all authorizations required for the QA localization effort).
>
For the issues that you encounter because of system copy, you can minimize this time period as you would be doing it on periodic basis (making some task list) and you can make a note of issues that you faced in previous run. So, normally i don't count it as system copy time
Thanks
Sunny

SMD Agent for ABAP Only Systems

Everything I have read states that the SMD Agent is only for JAVA Stack. Then I read a post here stating to install the SMD on the ABAP systems. Can anyone clear this up? I have a mix of Java only, Abap only and dual stack systems. Can anyone help clear this issue up for me?

Hello Donna,
SMD Agent can be installed on Java Stack, Java-ABAP Stack and ABAP Stack. It is not there only for Java as it can be used with ABAP and Dual stack also. Hope this answers the question that you have brought up.
Thanks,
Mark

Fibre upgrade for Exchange only lines (EANAR)

Who can advise me if there are any plans to upgrade Exchange only lines in my local Norfolk exchange (EANAR) to FTTC as I currently cannot get fibre despite my Exchange having been upgraded in Dec 2014? BT Openreach were near useless in just confirming that my existing landline was exchange only followed by rubbing salt in to the wound by announcing how BT Openreach has managed to get fibre to everyone else in the area (i.e. without an exchange only line)! The local exchange was upgraded as part of BB for Norfolk project.
Many Thanks.
Solved!
Go to Solution.

beebee1 wrote:
Hi,
You contacted Better Broadband for Norfolk. Do you or any one else on here know who I can contact for Hackney, London, please?
Hi beebee1,
Unless anyone else knows of a BDUK scheme for London, there is none listed here :-
For specific information on your particular area, please click on the ‘more info’ links in the table.
Area Contract signed Fibre broadband target (% of premises) Superfast broadband target (% of premises) Target date More information
Surrey
Sep 2012
99.7%
Not clearly specified
End 2014
More info
East Sussex
May 2013
99%
96% (at least 24 Mbps)
Beginning summer 2016
More info
Wiltshire and South Gloucestershire
Jan 2013
Not specified
91% (over 24 Mbps)
Mar 2016
More info
Cambridgeshire and Peterborough
Mar 2013
98%
90%+ (at least 24 Mbps)
End 2015
More info
West Sussex
May 2013
98%
Not specified
Spring 2016
More info
Merseyside
Oct 2013
98%
89%
Jul 2016
More info
Dorset
July 2013
97%
95% (at least 24 Mbps)
End 2016
More info
Staffordshire
May 2013
97%
95% (24 Mbps+)
Spring 2016
More info
Lancashire
Apr 2012
97%
Not clearly specified
End 2014
More info
West Yorkshire
Sep 2013
97%
Not specified
Autumn 2015
More info
Cheshire
Apr 2012
96%
Not specified
End 2016
More info
Wales
Jul 2012
96%
Not specified
End 2015
More info
Northumberland
Apr 2013
95%
91%
Jan 2016
More info
Kent
Mar 2013
95%
91% (25 Mbps+)
End 2015
More info
Derbyshire
Aug 2013
95%
Not specified
End 2016
More info
Leicestershire
Aug 2013
95%
Not specified
Mar 2016
More info
Nottinghamshire
Aug 2013
95%
Not specified
Mar 2016
More info
Cornwall
2010
95%
Not specified
End 2014
More info
Hampshire
Mar 2013
Not specified
At least 90%
End 2015
More info
County Durham
Apr 2013
94%
Not specified
End 2016
More info
Lincolnshire
Mar 2013
94%
At least 88%
Apr 2016
More info
Cumbria
Nov 2012
93%
Not clearly specified
End 2015
More info
Shropshire
Mar 2013
93%
Not clearly specified
End spring 2016
More info
Berkshire
Oct 2013
91%
Not defined
September 2015
More info
Warwickshire
Jun 2013
91%
Not specified
Spring 2016
More info
Milton Keynes and Central Bedfordshire
Aug 2013
91%
Not clearly specified (about 90%)
Spring 2016
More info
Worcestershire
Aug 2013
Not specified
90% (24Mbps+)
Spring 2014
More info
Oxfordshire
Aug 2013
Not specified
90% (24 Mbps+)
End 2015
More info
Northamptonshire
Mar 2013
91%
90% (more than 24 Mbps)
Sep 2015
More info
Hertfordshire and Buckinghamshire
Mar 2016
More than 90%
Not specified
March 2016
More info
Hereford and Gloucestershire
Dec 2012
90%
Not clearly specified
End 2016
More info
Rutland
May 2012
90%
Not specified
End 2013
More info
Suffolk
Dec 2012
Around 90%
Over 80% (at least 24 Mbps)
End 2015
More info
Devon and Somerset
Jan 2013
90%
Not specified
End 2016
More info
North Yorkshire
Jul 2012
90%
Not specified
End 2014
More info
Essex
Aug 2013
87%
Not specified
End summer 2016
More info
Norfolk
Dec 2012
Not specified
Over 80% (at least 24 Mbps)
Autumn 2015
More info
Best regards,
dfenceman

HT201318 I had 40 GB for icloud backup already which I had paid $40 for already and I upgraded to 100. Shouldn't I only be charged $60 instead I was billed 100! How come?

I had 40 GB for icloud backup already which I had paid $40 for already and I upgraded to 100. Shouldn't I only be charged $60 instead I was billed 100! How come?

yeah, that stinks. do you at least get a full year from your purchase date?
the only thing i can think of is that they charge you 100 for a full year. but you would think they would apply a retro rate for what you haven't used.
how long have you been using your 40 GB? when did you first pay for it?
depending on your answers to those questions you might have a good case to call apple and get something fixed.

System copy for ABAP+JAVA system using SAPINST method

Dear support,
We have recently upgraded to ECC 6.0 system and we have been still doing system copy by using backup and restore method. I know its wrong.
which involves below steps , this old methos works fine for ABAP engine and evreything looks ok.But java engine will not work.
So we need to use SAPINST method as described in note 785848 and system copy guide available on OSS. But i am really not able to understand sequence
for tasks to be carried out in this SAPINST method.
Can anybody list few sequence along with step by step procedure as i mentioned below for old system copy procedure.
Is it really difficult to make that for SAPINST as everybody says refer to standard guide and note ?
Anybody if possible can make the same way as i did below , i think it would rather be small as far as my understanding after reading those docs.
Simple old system copy procedure works for ABAP is as:
Run the following command on source system.
a. Login as <sid>adm
b. svrmgrl
c. connect internal
d. alter database backup controlfile to trace;
e. exit;
f. Above command will generate a .trc file in /oracle/P01/saptrance/usertrace directory.
g. Copy the text from CREATE CONTROLFILE until the ( and paste it in to any new .sql or controlfile.sql file.
h. Copy the controlfile.sql to target system.
i. Edit the file and replace the entire source SID to target SID.
j. Edit the reuse database command with the set database command
Copy the aft generated during the backup file from the source system to target system. (/oracle/<SID>/sapbackup)
a. Change all the source <SID> to target <SID>.
b. Only don't change the backup volume name it must be target system <SID>.
c. Copy the above aft file name line from the source back<SID>.log to target<SID>.log file.
5. Shutdown the target server instance.
6. From this onwards all the command on the target system only.
a. Login as <SID>adm
b. run the SAPDBA
c. select J (Restore/Recovery)
d. select B (Full restore and recovery)
e. select A (Select backup of type)
f. Select the offline backup which you want to restore.
g. It will take some time to restore.
h. Once the database is restored login as <SID>adm and run the
i. svrmgrl
j. connect internal;
k. startup nomount (if the database is already mounted shutdown it using the shutdown command)
l. run the following command
m. @controlfile.sql (file name of the control file contains the CREATE CONTROLFILE statement)
n. After the run the above command it should give the "Statement Processed)
o. alter database open resetlogs.
I am really looking forward to see anybody take some time out to prepare this kind of step by step procedure.
It would be of greate help for all of us for performing system copy with sapinst method.
Looking forward for your support.
Best Regards,
AjitR

Hi,
As per the guide you need to do source system Technical Preparations, in that running the export preparation is also one. You need to run this first before you start the export, if and only if export will successful if preparation is successful.
Yes you need to create the export directory to take the export copy of source system, it may be any where in your server. It should be having 6 to 8 GB free space.No need to create the export directory in target system, after export is completed in the source system you copy the export directory to the target system.
Target system
Yes you need to take the back up file system and delete all the contents of the directory.
Yes it can be considered as fresh system installation but copy of source system.
Yes the process follows after you giving the export directory path .
Next screen you will get the database drop and recreate screen chouse the drop and recreate method
Next J2EE user name and password
Next DDIC password
Next you have to give kernel and oracle client dvd path
Next Parameter checking screen here if you are selected database drop and recreate you have to revise the oracle database system option
If you are selecting review next screen is database advance option you have to select the advanced option
Next you have to select following option to recreate
1 Sapdata directory mapping
2 Database instance file system
3 Create database parameter
4 Create tablespace
Next screen sapdata directory creating
Next screen you can just click next no need to change any setting
Next table creation
Next screen specify oracle instance directories
Next again parameter checking and last this is last screen
Next will be the execution screen
Reward points if usefull

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Using the Execute Preloaded Option for ABAP Dataflows in SAP BODS

Hello All,
This is regarding the use of Advanced Option in SAP Application Type (ECC) Datastore settings in SAP BODS 4.2, where there are two options to select from for ABAP Execution Option property: (1)Generate and Execute and (2) Execute Preloaded. Since our ECC client is often locked by BASIS team even on DEV environment, we would like to make use of the second option 'Execute Preloaded' so that we could extract the data from ECC tables without having to ask the BASIS team to unlock the ECC client every time before extraction.
The problem is that we are getting an error upon generating and uploading the ABAP program to ECC client. I have searched the blogs and so far I have only found that there are certain ABAP programs or function modules that come with SAP BODS which need to be installed by BASIS team on ECC side to allow the ABAP dataflows to be generated and uploaded to ECC server. I would appreciate it if anyone could provide a list of which function modules BASIS needs to install on ECC or a blog that provides details around using this option.
So far, from the SAP BODS designer, we are performing below steps but getting an error upon generating and uploading the ABAP dataflow program:
1. Create a test ABAP Dataflow using SAP ECC datastore. Provide the ABAP program options.
2. Right click, select Generate ABAP Program.
3. Once the ABAP Program Generation Dialog box appears, check the box "Upload Generated Program".
4. Upon clicking OK, we are getting the following error:
The ABAP program <ZRTEST01> for ABAP data flow <RT_TEST_R3> (datastore <R3_DS>) was not uploaded: < RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_MESSAGE- Exception condition "NOT_SUPPORTED_BY_GUI" trigger[SAP NWRFC 720][SAP Partner ### ][clientname][servername][accountname][4103]>. >.
Any help would be greatly appreciated.
Thanks,
Rizwan

All,
The BASIS team reviewed steps provided in the BODS document and attempted to install the Function Modules but now none of the BODS jobs would work. All BODS jobs are being terminted with the Syntax Error error when extracting data from ECC using ABAP dataflows:
17740 16404 R3C-150412 06/17/2014 9:38:46 AM |Data flow RT_DF_TEST_PC207
17740 16404 R3C-150412 06/17/2014 9:38:46 AM RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_RUNTIME_FAILURE-(Exception_Key: SYNTAX_ERROR)- Syntax
17740 16404 R3C-150412 06/17/2014 9:38:46 AM error in program /BODS/SAPLBODS .[SAP NWRFC 720][SAP Partner 740 ][DEV1][Server][account][4103]>.
22052 20572 R3C-150412 06/17/2014 9:38:46 AM |Data flow RT_DF_TEST_PC207
22052 20572 R3C-150412 06/17/2014 9:38:46 AM RFC CallReceive error <Function /BODS/RFC_ABAP_INSTALL_AND_RUN: RFC_ABAP_RUNTIME_FAILURE-(Exception_Key: SYNTAX_ERROR)- Syntax
22052 20572 R3C-150412 06/17/2014 9:38:46 AM error in program /BODS/SAPLBODS .[SAP NWRFC 720][SAP Partner 740 ][DEV1][Server][account][4103]>.

Impact of Installing BI Java on an ABAP only BI 7.0 system

Afternoon Everyone,
I'm looking to answer a couple of questions around installation of BI Java on an ABAP only BI 7.0 system.
Firstly, I am looking for some guidelines around common problems we would expect to see if a BI java stack is implemented on a BI 7.0 system that is currently ABAP only. I would like to be able to gauge the impact of any such exercise, so we can translate that into extra project effort (both technically and functionally).
Secondly, I am looking for suggestions around the areas where the post Java install regression testing should be focused so we can ensure the existing functionality of the system is unaffected by the install & activation of the BI Java stack.
Id be really grateful for any input you would be able to provide around these questions!
Thanks
Tim.

Hi,
Pls Look at note 917950, esp. Problem_Analysis.zip in Attachments for the Installing BI Java on an ABAP only BI 7.0 .
For Some more thoughts ,pls chk below link
https://www.sdn.sap.com/irj/sdn/threadmessageid=3034054#3034054
What are the pros and cons of installing java+abap stack for portal?
WAS 6.4 with Java or ABAP + Java
http://help.sap.com/saphelp_nw70/helpdata/en/29/ff9036e1e4b603e10000009b38f889/frameset.htm
*pls assign points,if info is useful*
Regards
CSM reddy

Can't apply AP credit for freight only

It is sometimes necessary to enter an A/P Credit Memo for freight only. This has been doen by entering a service-type credit memo, with nothing in the rows but an amount in the Freight section of the footer. Then this credit memo can be selected along with one or more invoices when creating an outgoing payment. This procedure has worked without any problms in version 2007.
Now the customer is upgrading to 8.81 PL8. When the scenario above is followed, there is an error on the outgoing payment which says "No Record Matching" and references RPC1, the A/P Credit Memo rows. If I populate a row on the credit memo with any GL account and a zero amount, there is no error. We have tested at 8.81 PL9 and also 8.82 PL0, and the error also comes up in those versions.
Is this a bug in the system? There doesn't seem to be any reason why the credit memo should not be accepted in the outgoing payment, regardless of whether it has anything in the rows or not.
Thanks for your help.
Marcia

Thank you both for your replies.
I have checked this issue in several different databases, including the SAP demo, in the different versions referenced above. The results are consistent: there is no error in versions prior to 8.81 PL8, and there is an error from PL8 onward.

How to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?

Hello,
I wonder if you can please help me out.
I wonder, is it possible to upgrade my internal hard drive for macbook 5,2 from 160GB to 1TB?
Thanks,

There's only one 9.5mm high 1tb drive around http://eshop.macsales.com/item/Samsung/HNM101MBB/
With a video on replacing the hard drive http://eshop.macsales.com/installvideos/macbook_13_mem_hd/

Java Add-In installation for Abap

Hello Friends,
I have installed NW2004s Abap stack for use BW features.
Now, I need to install Java Add-In (including EP and BI Java to use BEX and Integrated Planning) in this same installation.
In SAPINST (Additional Software Lifecycle -> Java Add-in for Abap), have 3 steps to install J2EE Add-in:
1 - Install SCS
2 - Install database Instance
3 - Install Central Instance
Is this correct? I really necessary to execute these steps? (for example, I have NW2004s database Abap running. Why I need to install database instance again?)
Anybody can help me in this procedure?
Thanks,
Carlos

Hi Everyone.
My scenario is similar with one important difference.
I upgraded from BW 3.5 to BI 7.0. However we never had a java stack on BW before and i did not install one during the upgrade. now the guys want a java stack.
I read the message about putting in a BI Java add in to existing ABAP system. however our hardware for the Abap system is not very good. is it then possible to put the Java add in on another machine ?
What steps are required. Specifically do i run sapinst on the new hardware and what options do i specify.
I have worked in Basis for a long time but am new to this Java stuff, so as much details as possible would help.
Regards
Shirish Joshi

Cannot select Technical Usage "Learning Solution - ABAP only" on ECC Server

Dear Gurus,
        My environment are
        a SAP ERP System(ABAP only) in SMSY with
               Product Version = "SAP ERP 6.0"
               Main Instance = "SAP ECC Server" (as Relevant)
                       Note When I select another Relevant for "SAP Learning Sol-Frontend"
                                   Use in logical components; action not possible (see long text)
                                   Message no. SMSY_EDIT_LANDSCAPE413
                                   ... There can only be one relevant ABAP-based main instance. ...
        Select Product Version = "EHP4 FOR SAP ERP 6.0 / NW7.01"
        and Target Stack = "SAP ERP Enhancement Package 4 on NW7.01 - SP Stack 04"
        Existing Technical Usages are
                 - Central Applications
                 - ERecruiting on ECC Server
                 - Financial Supply Chain Mgmt
                 - Human Capital Management
       But I can't add Technical Usage for "Learning Solution - ABAP only" or "HCM - Learning Solution" (The checkbox is in gray color so I can't check it)
       What am I wrong? Please advice.
Best regards,
Choosak

Hi Choosak,
Try this ,
Go to SMSY transaction then select your system .
In right side you will get the screen where all usage types are defined for your system.
Select learning solution and HCM and save it.
Go back to your solution and see whether you can see Learning solution after that.
Thanks,
Gerard

Upgrade to PI7.1 is for ABAP only?

Similar Messages

Maybe you are looking for