Upgrade to Prime 2.0 from LMS 3.2.1

Hello all, and thanks in advance for any help you can offer. Is there an upgrade path from LMS 3.2.1 to Prime Infra 2.0? Or given 2.1 is now available perhaps to 2.1?
My plan of attack at the moment is to download the OVA for the Small deployment, and build out the DB from scratch. But we do have a significant number of devices so I was wondering if some sort of DB import was possible. It appears that I would have to upgrade our current LMS to 4.2 first to do this though, and that is more hassle than its worth if that is in fact the case.
The other question I had is around licensing. We currently have LMS and NCS running in our environment. How can I combine the licensing from each so I can get the same levels on Prime Infra? Both NCS and LMS are under software support if that helps at all.
Please advise, any help would be greatly appreciated.
Jeff

You can't do a direct db import but you can use the dcrcli utility in LMS 3.2 to export a csv file of your devices and credentials.
You can then manipulate it using Excel or such to match the required format in PI 2.x. (That's basically what's done for you if you go the the trouble of upgrading to LMS 4.2 and using the export utility there.)
There are upgrade SKUs available for NCS to PI. Your reseller or Cisco partner can use the Cisco Prime "BOM Builder" (ordering guide available (only to partners) in the partner community) to determine the correct part number to order.

Similar Messages

  • Upgrading from LMS 4.1 to Cisco Prime Infrastructure

    Looking for some information and confirmation on the upgrade process.
    Currently we are running LMS 4.1 with a valid SAS Service Contract which will allow me to upgrade to Prime Infrastructure 1.1 or Prime Infrastructure 1.2 using the upgrade tool at no charge. After using the tool I am given access to download PI1.1 or PI1.2, however, it only actually let me download PI1.1 but said i do not have the proper permissions to download the 1.2 license. I also noticed that the software images for 1.2 are not available ont he ciso download page.
    I am wondering what the latest version of Prime Infrastructure I will be able to upgrade to without an additional purchase. Can I upgrade up to all the way up to 1.4 or can I only go up to 1.2 (but then where is the download for the software).
    If i can upgrade to 1.4 then what path should I take? 1.1 to 1.3 to 1.4? Just skip 1.2 since the download is not available and it will not let me download the license file?
    Thank you for your help

    LMS 4.x to Prime 1.x would not be considered a functional or recommended "upgrade" for most intents as you would lose several major capabilities (Topology, Ciscoview, many reports, compliance templates, etc.). Your best path right now would be to move your LMS along to the current version - 4.2.4. The release notes explain the upgrade path for that.
    Licensing and upgrade eligibility-wise you need SASU for PI (not plain SAS for LMS) for major upgrades (i.e to go to 2.0). An LMS SAS contract entitles you to migrate to PI 1.2 which in effect means 1.3 although Cisco had some issues with updating the ordering system so there was not actually a SKU for PI 1.3 sold - only the 1.2 version which, when combined with your LMS SAS service contract, entitles you to move to PI 1.3 (or 1.4 but that's not generally recommended). More details are in the Prime Ordering and Licensing Guides here.
    Personally, I recommend customers with existing LMS 4.x installations wait until PI 2.1 comes out to consider the upgrade. 2.0 still misses several tools present in LMS 4.x.
    If you really want to move over to PI, you can export the data from LMS 4.2.4 and import into PI 1.3 (or 2.0).

  • Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

    Hello
    How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L  switches that my organization has and cannot managed them..
    I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
    "Error while downloading package information from Cisco.com for the selected  products. See the log file for details".
    Also i can not run EOL/EOS inventory report. The message is
    " INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
    The server  has access to www through proxy without any restrictions.
    In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
    The LMS 3.0 December 2007 has the following products
    LMS
    3.0.1
    16 May 2008
    CiscoWorks  Common Services
    3.1.1
    02 Jul 2009, 07:44:58 EEST
    2.
    Campus  Manager
    5.0.5
    11 Oct 2009, 07:36:10 EEST
    3.
    CiscoView
    6.1.7
    02 Jul 2009, 07:45:05 EEST
    4.
    CiscoWorks  Assistant
    1.0.1
    02 Jul 2009, 07:45:05 EEST
    5.
    Device Fault  Manager
    3.0.5
    12 Jun 2010, 07:31:48 EEST
    6.
    Internetwork Performance Monitor
    4.0.1
    02 Jul 2009, 07:45:11 EEST
    7.
    Integration  Utility
    1.7.1
    02 Jul 2009, 07:45:14 EEST
    8.
    LMS Portal
    1.0.1
    02 Jul 2009, 07:45:16 EEST
    9.
    Resource  Manager Essentials
    4.1.1
    02 Jul 2009, 07:45:17 EEST
    Has anyone knows what can be the problem??.
    Thanks

    Hi,
    the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
    Symptom:
    After the 16th of June 2011 LMS will no longer  be able to download Software and Device Package updates, or PSIRT and  End of Sale/Life information from CCO
    Conditions:
    Hosted  services in Cisco.com that are being leveraged by LMS, for downloading  the latest Software and Device Package updates, as well as the PSIRT and  End of Sale/Life information are being migrated to a new framework and  the old services will be retired.
    This will affect all LMS 3.x and 4.x versions.
    Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
    Workaround:
    Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
    Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
    Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
    The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
    But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
    Sven

  • Problems upgrading from LMS 3.0 to LMS 3.2 - the backup fails.

    I'm upgrading from LMS 3.0 to LMS 3.2 on Solaris. I've met all of the prereq's, patches, etc. It keeps failing on the Backup...It claims I need 15 Gig for the backup. The backup directory I'm using (/opt/backup) has 35 Gig free, so that shouldn't be the issue.
    Here is the error I'm seeing in the backup.log;
    okcwsi:tail backup.log
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2950-i6q4l2-mz.121
    -13.EA1c.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c1310-k9w7-tar.124-
    10b.JDA2.tar: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c2800nm-advsecurity
    k9-mz.124-22.T1.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c3560-ipbase-mz.122
    -53.SE2.bin: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600-fpd-pkg.122-3
    3.SRE1.pkg: prefix is greater than 155
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_confi
    gs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/c7600s72033-advente
    rprisek9-mz.122-33.SRE1.bin: file name too long
    tar: /var/adm/CSCOpx/files/rme/dcma/shadow/sw_images/cisco_configs/sw_images/cis
    co_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/20100922075
    156561-10.181.252.1.cfg: No such file or directory
    ERROR(704): Cannot create or back up tar file. Backup cancelled. Verify that you
    have write-access to this directory.
    Backup failed: 2010/09/22 07:54:20
    okcwsi:
    I've tried this multiple times and each time it appears to fail on a different file/folder in the sw_images directory. This is our FTP directory where we store lots of IOS images for download. I've removed each of these files it errors out on and it keeps failing. I just removed all files from the sw_images folder and am trying the backup again now.
    I'm attaching the backup.log which contains the failure information for each backup I've tried in the past two days.
    My main question is...can I skip this backup somehow? I've got another LMS 3.0 system that I can export everything I need from. Skipping the backup isn't an option on the install/upgrade? It gives me the option to quit the install or try the backup again.
    Thanks,

            You can skip the backup with a hidden option:
    ./setup.sh -b nobackup
    However, I wouldn't feel comfortable until figuring out why the backup has been failing, ostensibly because tar is running into the 255-char limit (100 for the filename and 155 for the path), a result of the many iterations of the following:
    sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/cisco_configs/sw_images/

  • Problem after upgrade a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2

    I have upgraded a PRIME-NCS-APL-K9 from version 1.1.0.58 to Prime Infrastructure 1.2
    First I have installed the Path "ncs_patch-1.1.0.58-upgrade-pi_1.2.tar.gz" and then the
    "PI-upgrade-bundle-1.2.0.103.tar.gz".
    after the upgade I have got the Message "Upgrade Successful".
    Now when I start the NCS i get the following error message
    egghead/admin# ncs start
    Starting Network Control System...
    Unable to verify hardware.
    This may take a few minutes...
    Health Monitor is already running.
    Failure during Network Control System startup. Check launchout.log for details.
    In the launchout.log are this messages:
    Starting Health Monitor as a primary
    Checking for Port 8082 availability... OK
    truststore used is /opt/CSCOlumos/conf/truststore
    truststore used is /opt/CSCOlumos/conf/truststore
    Starting Health Montior Web Server...
    Health Monitor Web Server Started.
    Starting Health Monitor Server...
    Health Monitor Server Started.
    Starting Remoting Service: Reporting Server
    Checking for running servers.
    00:00 Check complete. No servers running.
    Starting Server ...
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    Starting Remoting Service: Reporting Server
    The Report Server startup script is already running waiting for report server to start
    have anyone an idea whats wrong?
    thank you for your help
    Kurt

    i have  the same problem
    NCS/admin# ncs status
    Health Monitor Server is starting.
    Reporting Server is Starting
    Ftp Server is running
    Database server is running
    Tftp Server is running
    Matlab Server is running
    NMS Server is stopped.
    SAM Daemon is running ...
    DA Daemon is running ...
    Syslog Daemon is running ...
    status
    I try it
    To get it back up and running do the following from the CLI.
    1. Stop the NCS
    2. Run 'ncs db reinitdb'
    3. Start the NCS
    but the status is the same

  • Upgrade from LMS 3.2 to 4.0 - Backup inquiry

    I'm going to upgrade very soon from LMS v3.2 to v4.0, and I want to back up all my router and switch configurations just in case anything goes wrong at any point. Is there some sort of document I should look at that contains a brief on:
    Everything I need to back up
    How to go about backing the system up completely
    If something does go wrong, how to restore using the backup
    If someone could help me out with the above info, it would be greatly appreciated.
    Thanks!
    Aamir

    How to make backup data - http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_common_services_software/3.3/user/guide/admin.html#wpmkr838086
    How to restore backup from 3.2 to 4.0 - http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6504/ps6528/ps11200/deployment_guide_c07-618226.html#wp9000786
    If anything is wrong with the backup you will have an error message. Also could double check in the backup.log file that the backup was succesfull.

  • Upgrade Cisco Prime LMS 4.0 to Cisco Prime Infrastructure 2.1

    My company has asked me to migrate Prime LMS 4.0 to Prime Infrastructure 2.0 for a client and can not find the guide, the questions are? the migration is possible without an intermediate step? and There is a guide to update LMS 4.0 to PI 2.0 ??
    Thanks in advance.

    Prime LMS 4.2.2 added support for the PI template directly:
    Export Data for Prime Infrastructure
    Cisco Prime LAN Management Solution supports data migration to Prime Infrastructure 1.2. This feature enables user to export the Device Credentials Repository (DCR) data from LMS 4.2.x versions to Prime Infrastructure 1.2. The data backup status and backup location are displayed at the bottom of the Export Data for Prime Infrastructure page. The data being exported from LMS and the data imported back to PI are listed as follows.
    Data exported from LMS
    •Device Credentials Repository (DCR)
    •Software Image Management
    •Config Archive
    •Change Audit
    •Syslog
    Data Imported to PI
    Device Credentials Repository

  • DFM Error after Upgrade from LMS 3.1 to LMS 3.2

    Hi Cisco Community,
    I have a big problem with the LMS  Application Device Fault Manager 3.2.0 after an Upgrade from LMS 3.1 to LMS 3.2
    The LMS upgrade finished without error.
    The Alerts and Activities Diplay encountered an error with the following message:
    "An exception occured.Please check the AAD.log file for further details"
    You find the "pdshow"  and "netstat" output and also the AAD.log, DeviceManagent.log, EPM.log, brstart.log and TISServer.log attached to this message
    Everything else works fine.
    A Cisco Daemon Manager restart doesn't fix this problem.
    Any ideas to fix this problem?
    Thanks for your help.
    Best regards
    Stephan B.

    The output of the command "brcontrol" was:
    Error attaching to broker: S25B2005:9002!
    I found a workaround for this error message at the release notes for the Cisco Unified Operations Manager.
    The workaround is:
    1.) net stop crmdmgtd
    2.) Wait 15 minutes
    3.) net start crmdmgtd
    After completion of this workaround, I got the following output:
    Broker is located at: S25B2005:9002      Started: May 07 11:08:47 2010
    Domain Host Name         Port     PID State   Last Change Time
    DFM    S25B2005.drv.bb  21900   18060 RUNNING May 07 11:08:55 2010
    DFM1   S25B2005.drv.bb  21903   13988 RUNNING May 07 11:08:55 2010
    You find this outputs attached to this message.
    Unfortunately the errors in the DFM application are the same as before.
    Also I get some error messages in the "Polling and Threshold" menu.
    You find this error message attached to this message.
    I already execute the following steps from the Cisco TAC to solve this problem.....without success.
    Stop Daemons >>> net stop crmdmgtd from CLI.
    Open windows explorer and go to \CSCOpx\databases\dfmFh. Delete dfmFh.log.
    Go to \CSCOpx\databases\dfmFh>  from CLI and run:
    dbsrv10.exe -f dfmFh.db from CLI.
    Similarly open windows explorer and go to \CSCOpx\databases\dfmEpm. Delete dfmEpm.log.
    dbsrv10.exe -f dfmEpm.db from CLI.
    Similarly open windows explorer and go to \CSCOpx\databases\dfmInv. Delete dfmInv.log.
    dbsrv10.exe -f dfmInv.db from CLI.
    Note : Please check a screen will pop up each time you execute these commands.
    Then, Start daemons >>> net start crmdmgtd from CLI.

  • WCS upgrade to Prime 1.2

    I'm currently running WCS 7.0.230 ready for upgrade to Prime 1.2. Reading Cisco docs, the path is to upgrade from WCS to NCS 1.1.1.24 firstly, then to Prime 1.2
    so far...
    export.bat all > wcs-export.zip
    also performed a backup via the GUI backup tool
    have a NCS 1.1.1.24 - 30 day eval license (docs say eval is enough before upgrading to Prime 1.2 which you have purchased)
    A couple of things are not clear to me,
    http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/quickstart/guide/cpi_qsg.html#wp56675
    currently WCS runs
    7.0.230
    Feature - plus
    AP limit 150
    Type permanent
    Does this mean I need to uninstall WCS to install NCS cleanly or is there an upgrade path without uninstalling WCS manually? In the download section you can only download  for Small/medium/Large. I intend to download medium, but again there are no specifics I can find in relation to my WCS license i.e. - AP limit = NCS medium or do I look at my new Prime License 500 Device upgrade LIC
    I'm looking for better documentation WCS > Prime.

    I manged to upgrade to NCS 1.1.1.24 without any problems and successfully migrate the WCS backup file into NCS.
    The next issue I have is upgrading from NCS 1.1.1.24 to Prime 1.2.
    Performed NCS backup successfully
    admin# show repository defaultRepo
    backup-20130422-0950.tar.gpg
    PI-upgrade-bundle-1.2.1.12.tar.gz
    Upgrade not successful (i'm still running NCS eval license, should I be importing Prime PAK licenses after upgrade to Prime?)
    admin# application upgrade PI-upgrade-bundle-1.2.1.12.tar.gz defaultRep                                                                              o
    Save the current ADE-OS running configuration? (yes/no) [yes] ?
    Generating configuration...
    Saved the ADE-OS running configuration to startup successfully
    Initiating Application Upgrade...
      Stage 1 of 7: Transferring file ...
      -- complete.
      Stage 2 of 7: Unpacking file ...
      -- complete.
    % One or more required RPM's not found in the bundle
    admin# show ver
    Cisco Application Deployment Engine OS Release: 2.0
    ADE-OS Build Version: 2.0.1.038
    ADE-OS System Architecture: x86_64
    Copyright (c) 2005-2010 by Cisco Systems, Inc.
    All rights reserved.
    Hostname: SV195968
    Version information of installed applications
    Cisco Prime Network Control System
    Version : 1.1.1.24

  • Upgrade Cisco Prime Infrastructure 2.1.1 to 2.2

    Hi,
    I would like to know how to
    1. Upgrade Cisco Prime Infrastucture 2.1.1 to 2.2 procedure
    2. How to backup existing config and data
    Thanks in advance
    - nazir

    Hi Nazir,
    Refer the below link  for the upgrade from the exiting version ::
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-113783
    Follow the same steps :
    Step :Backup  on 2.1  
    Step 2: Restore  2.2
    Backup and Restore::
    Backup command::
    PIServer/admin# backup MyBackupFileName repository MyRepo application NCS
    Check the below link for
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#pgfId-1080733
    Step ::
    Once Backup is completed , you need to Restore the backup to the Newly Buid PI 2.2 server::
    Restore command:
    PIServer/admin# restore filename repository repositoryName application NCS
    Check the below link:
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/administrator/guide/PIAdminBook/backup_restore.html#99810
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ****

  • Hi, I have an iphone 3GS from HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out! When I checked my backup file in Outlook Express it was also wiped out!!! What can I do now?

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

    Hi, I have an iphone 3GS purchased in HK. After upgrading to 4.3.3 from 4.3.2 as prompted by itunes on May 10, 2011 my entire contact in my iphone was wiped out. When I checked my backed up file in Outlook Express, it was also wiped out during the synchronization. I tried to restore from backup on iTunes but still, the contact was not there anymore. I have contacted your HK Apple Hotline and talked to a technical support called TIMMY LO, he said there is nothing to do with them and he refused to provide any support to recover my contact, he even said I should try to pay extra money to 3rd party supplier and see what they can do to my iphone, despite the fact that this could be caused by the pre-mature release of 4.3.3 when a bug still hasn't been fixed. I am very disappointed at Apple's service, especially considering that I have been a loyal customer of iphone / ipod touch in the past few years. I need an official reply from Apple on this! How can Apple be so irresponsible to their own firmware failure??

  • I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
    (125734)

  • Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

    Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

    Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
    The post is at:
    http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

  • Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

    Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
    Rp

    1. in physical connections part can i use the same work schema
    2. Can i use same contexts created or do i need to create everything as new and then try?
    Thanks,
    Rp.
    Hi,
    As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
    Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
    And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

  • While opening most of the website i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before. Kindly help.

    while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
    HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    type Status report
    message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
    Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

    while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
    HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    type Status report
    message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
    description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
    Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.

Maybe you are looking for