Upgrade to QT7 Pro for use with FCP 4.5 & DSP3 ???

I have read throught the material on QT7 & H.264 but am undecided. (ie; confused).
I have OS 10.3.9; Quicktime 6.5.2 Pro; FCP 4.5 HD (with the MPEG2 playback component); Compressor 1.2.1 and DVD Studio Pro 3.0.2.
Is there an advantage or point in upgrading to Quicktime 7 Pro with my current setup?
The only advantage I can see is H.264; but I don't think this is useable in DSP3 even when using the "standard" setting for DVD. (Sorry if that's wrong, as I said I've read the material but it's somewhat vague). I suppose I'm wonderfing if you can use H.264 in DSP3 to create smaller files and thus put more material on a standard format DVD.
Any advice or thought welcome.

Thanks David.
I kept researching and reading after putting up the post.
Upgrading to OS 10.4 & DSP4 & FCP5 to get Compressor 2 is just to expensive for me at this time.
And after much thought upgrading to QT7 for h.264 just to watch videos online, (and not having broadband thats a very time consuming process), I think I'll just stay with what I have at the moment which works well.
Many Thanks for the feedback and confirmation.

Similar Messages

  • Best Macbook Pro for use with FCP X for the money?

    I am on a budget, but don't want to be frustrated with FCP X being slow or crashing. What Macbook pro configuration would you recommend? I'm currently considering 4 15" configurations that are below, but am open to any suggestions. I figure I can always get an external drive to upgrade the RAM, so I'm keeping that low to save. What processors, HD and video cards does everyone recommend? Thank you!
    #1
    2.2GHz Quad-core Intel Core i7
    4G
    500GB Serial ATA Drive @ 5400 rpm
    AMD Radeon HD 6750M with 512MB GDDR5
    #2
    2.2GHz Quad-core Intel Core i7
    4G
    750GB Serial ATA Drive @ 7200 rpm
    AMD Radeon HD 6750M with 512MB GDDR5
    #3
    2.4GHz Quad-core Intel Core i7
    4G
    750GB Serial ATA Drive @ 7200 rpm
    AMD Radeon HD 6770M with 1GB GDDR5
    #4
    2.4GHz Quad-core Intel Core i7
    4G
    500GB Serial ATA Drive @ 5400 rpm
    AMD Radeon HD 6770M with 1GB GDDR5

    Don't skimp on memory.
    I personally use OWC for almost all of my Mac upgrades, especially memory and SSDs.
    I'd highly recomend getting 16GB. You only have two slots, so it's not like you can add memory, you have to replace memory. I've seen many users post issues with FCP X who simply don't have enough memory.
    http://eshop.macsales.com/item/Other%20World%20Computing/1333DDR3S16P/

  • External Hard Drive for PowerMac G5 for use with FCP Studio

    Hello,
    I'd greatly appreciate any recommendation for an external hard drive for a PowerMac G5 for use with FCP Studio.
    Thanks.
    -graziemile

    We see alot of Lacie issues here and elsewhere.
    Drives fail... period. I believe you hear more about Lacie drives failing because they sell a ton more of them than many other suppliers. I've got 8 of em sitting right here on the desk and two more at the second station. I've lost one since I started using them years ago (and it had problems right out of the box) and I use them pretty heavy.
    I understand that they use several different brands of drives in their enclosures, but from my experience they must have pretty good QC standards for what they package.
    The guy said the G Techs were a little overkill for his needs. Lacie doesn't pay me. But if someone asks "how are Lacies?" I'll tell them they've been great for me and many others I know, especially if your requirements are capturing DV.
    In five years, I ain't heard anybody say anything about it.
    As for FCP. I love it! In 20 years of business, it's probably the purchase that's given me the most bang for my buck. But if you haven't heard people knock it, you've never met an Avid zelot, bruhhhhh, just the thought gives me shivers.
    The drives X mentioned are designed for video work.
    What Studio said, well he gives out some of the best advice on this board
    (and maybe the most! ) and my reply to his post... that's why I used the little smiley face. No offence intended X.
    I only meant to say that, in a world where software like FCP can do what it does at the price it does it, and drives like Lacie and G Tech can give you the storage they do for the price they do, the line between consumer and professional products is easily blurred.
    rh

  • Buying used G4s for use with FCP

    How well does FCP take advantage of dual-processor capabilities? I'm debating getting a G4 dual 533 vs. a G4 1.0 GHz machine. Which would work faster? Or are they both too painfully slow to even be worth it?
    Thanks for helping the new guy!

    My G4/400 is now 5 years old (I upgraded the processor last year to 1.5 Ghz). It works extremely well with FCP 5.0.4 with my particular setup - certainly very very usable and not at all painfully slow. But I'm not editing Hollywood blockbusters.
    The only limitation is that I can't install Motion, but I knew that before I bought FCStudio.
    Don't know anything about comparable performance of old dual-processor G4's.
    Reagrds
    Robert
    How well does FCP take advantage of dual-processor
    capabilities? I'm debating getting a G4 dual 533 vs.
    a G4 1.0 GHz machine. Which would work faster? Or are
    they both too painfully slow to even be worth it?
    Thanks for helping the new guy!

  • 2 imacs v 1mbp  for use with FCP and motion.

    I'm in need of advice. I'm in the market for a new computer(s).
    Let me give you a rundown on my situation.
    HOME COMPUTER- dual 800 1GIG ram G4. probably 6-7 years old -i got it 2nd hand in 03 i think-
    (its about 6 years old and very noisy and update needed)
    WORK COMPUTER- AL PB G4 1.5ghz 2gig ram 17". Bees knees when released almost 4 years ago.
    (redering and Motion are getting beyond tiresome with how slow they are).
    The WORK computer I do all my editing on while the HOME computer I use for internet surfing, itunes etc. I use FCP for editing wedding dvds, work related videos etc. but I'm thinking of taking a break from the wedding filming & editing business to concentrate on other things. I will still continue to edit and film but not as much in the past 6 years. As of last week I don't have any projects or side jobs in the pipeline but that may change within 6 months.
    MY QUESTION- What should I get?
    1. 1 x 2.6 Ghz 4gig Ram 17" MBP at around 3,500 dollars (i'm in japan so about 360,000yen) and then use my AL powerbook as my home computer
    OR
    2. 2 x imac 20inch with 4gig ram which i think comes in at just under the MBP price
    OR
    3. 1 x imac 24" 4gig ram & 1x imac 20" with 4gig ram.
    Is final cut pro and motion3 going to work better on the imacs than on my current AL powerbook? surely!
    I still use motion1 and that really pushes my computer to it's limits. and the last 2 years have been a hectic one editing wise so I didn't want to upgrade computers during the course of projects ongoing.
    (playing with fire in my books)
    THING IS i need to be able to edit at both work and home. I take a my laptop with me to work everyday, but if I were to get 2 desktops I could just use external hard drives for my projects (which I do anyway). That's why if both computers are desktops they both need to be able to handle motion 3 and fcp6 to a competent level. and if I got two desktops I could try and sell my AL PB. It's still in superb condition due to me keeping it sleeved whenever not in use.
    I heard rumours that apple will be releasing new imacs sooner rather than later as well.
    ANY thoughts would be highly appreciated.

    From what I've read on this forum, FCP doesn't work properly with two video cards.
    -DH

  • Seeking new camera for use with FCP

    Right now, I get dropped frames when I import video, whether via direct FireWire from my Panasonic 601, via my VCR or when I run video through an ADS converter. I run the video into a LaCie 500 GB Big Disk Extreme and I can't imagine that FireWire would not be enough to bring in video without dropped frames. I have read many posts here and all seem to lead to the hard drive, which mine should be more than adequate.
    I had intended to upgrade my camera last year, that did not happen, so looking at doing it now. This camera will be used for personal use, not for gigs. But I do not want to get a camera that will A) not dump video into FCP without a fight and B) continue this dropped frame garbage (if it has anything to do with the camera at all).
    I need to be able to hook the camera up to the FW port, got to log & capture, hit play and watch that sucker take the whole piece without a hiccup. It never made sense to me that FCP would not just keep capturing video even if there is a gap between segments. Maybe I am just missing a setting, but that never made sense to me. I can see it losing sync, but doing the whole stop-drop-&-roll makes no sense to me as a user. Granted, I am not an engineer.
    Any hints on good affordable cameras are appreciated. I still have about 30 home videos of 90 minutes length to get on DVD, so I am leaning back towards miniDV again. If someone can make an argument otherwise I am all ears.
    Thanks!!
    jf

    What device control setting are you using? there is firewire ntsc, and firewire ntsc basic. Try changing that to see if it makes any difference.
    In your user preferences there are options to set how fcp reacts on dropped frames and timecode breaks during capture. Check that these settings are to your satisfaction.
    Are you attempting to capture now? Or are you logging and capturing/batch capturing?
    Personally I suspect that it is the Lacie BigDisk causing the problem, in that you're trying to capture video, perform device control, and send the video to the external drive, all via firewire. Try capturing to the internal drive. Also, a lot of cameras don't play nice with other stuff on the firewire bus. All the fw ports on a mac are on the same bus so it's sometimes necessary to actually unmount the drive before trying to capture. I'd try all these options in the interest of establishing what the problem is before you spend money trying to fix it.
    You'd really be better off getting a big internal SATA drive to use as your media drive, much better value and faster.

  • Hard drives for use with FCP HD/G5

    I've been looking to get a new 500 gig hard drive for storing media for FCP HD. There is a big price difference between "G-Force" and "La Cie" drives. Does anyone recommend one over the other?

    "G-Force" is a cartoon with heroes that dress up as birds. G-Technology is the company that makes the best external hard drives out there. G-Raid being the drive of choice.
    BUT, what you are looking for is a drive to dump the p2 footage onto in the field, THEN you import from that drive to your media drive on your G5, right?
    Acomdata drives are what I use. Specifically the Ondago one.
    www.acomdata.com
    Now, watch my P2 import tutorial while you're at it:
    http://forums.creativecow.net/cgi-bin/pagewrapper.cgi?forumid=8&page=http://www.creativecow.net/articles/ross_shane/p2workflow/index.html
    Shane

  • JVC GZ-HD7U MPEG Streamclip export settings for use with FCP

    There are a number of compression options in the free MPEG Streamclip 1.9.2 and it's unclear what's best or how I would figure that info out. My guess is Apple HDV 1080i50, Apple HDV 1080i60, Apple DVCPRO HD 1080i50, or Apple DVCPRO HD 1080i60. The default setting was Apple Motion JPEG A, but this produced a huge file and doesn't seem right anyway. I think the desired frame size is 1920 x 1080, but I'm uncertain if I need to end up with an interlaced or progressive .mov file. My selectable options for progressive/interlaced are: "Interlaced Scaling," "Reinterlace Chroma," and "Deinterlace Video." Selecting "Deinterlace Video" excludes use of the other two options.
    These clips will eventually be edited in FCP and I'm guessing that the appropriate settings will match whatever is selected at the export stage.
    I'm using the JVC Everio GZ-DH7U HD Hard disk camcorder...I'm not sure if JVC uses the same setting across the board for it's HD cameras or maybe just the Everio cameras are similarly designed??
    Thanks to all!!

    the output should match the source file, generally speaking. So if you camera is making HD files then using a HD sized coded would suffice.
    HDV (IIRC) is 1440x1080. I often find that using the default settings for a particular file type in Streamclip often work quite well.
    As a test, take a small file. if it works, great batch process away, if not, tweak it and then try the same small file until you get a desirable result. Rinse and repeat.

  • Recommended hard drive enclosure for use with FCP?

    I will be doing capture and editing from my main HD, but want a firewire HD for backup. ANy recommendations on enclosures?

    I agree with David. Don't capture to your boot drive. External firewire drives are cheap and you also install an extra drive within you G5 case if that is what you are using. If on a laptop.. then firewire drives are the way to do.
    I know you asked about enclosures but I always love to pass along my current drive fav... G-Raid.
    http://www.g-technology.com/Products/G-RAID.cfm

  • Backgrounds in Final Cut Pro for use with green screens

    I have a class that has filmed some people talking in front of a green screen and now they are looking for a background of an awards ceremony or something close to that. Any help is greatly appreciated.

    All you need to do is get yourself a camera, set up something like a ceremony with the aid of your kids (ask them to maximize the use of their wardrobe and props and to invite friends if number is an issue) shoot a few wide shots, then use those shots as BG, blurring them slightly.
    The advantage of doing this is that you can use/set lights properly in order to match your talking heads video shot with a green screen as BG (People talking).

  • Good color monitor for use with FCP

    I'm looking for a color monitor that has dvi and S video inputs.

    http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=us&l=e n&s=dhs&cs=19&sku=320-8277
    Keep in mind this is a COMPUTER DISPLAY...not meant for critical monitoring of video. Meaning not to be used to judge the quality of video. Especially via S-Video. That's taking 720x480 and blowing it up to 1900x1200. Not pretty.
    Trust me...I have the 2405...
    Shane

  • Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone​?

    Can I activate ePrint on my HP Officejet Pro 8500 Premium printer for use with my smartphone? Any instructions?

    Yes.  You can do that
    Just follow the instructions for the appropriate device on this HP web document. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

    I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

    Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

  • How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

    I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

    Have you tried applying the update by going to Help>Updates within Photoshop Lightroom?  The update should be using the same licensing?  Did you perhaps customize the installation location?  Finally which operating system are you using?

  • What is an easy web-page creation program for use with MacBook Pro?

    Can anyone suggest an easy web-page creation program for use with MacBook Pro?  I have used FrontPage with my PC, but am changing to a MacBook Pro.

    It largely depends on your skill level. Do you want to write web page code, or do you want to just design something and have it turn into a web page automatically?
    If you are more of a designer, try these:
    RapidWeaver
    Freeway Pro
    Muse
    If you want to write web page code, try these:
    Coda
    BBEdit
    Dreamweaver
    If you really don't want to write the code and want the best experience for your viewers, and you want to spend the least amount of time on it, my recommendation is:
    No program at all.
    Instead, sign up with a web site company like:
    WordPress.com (hosted by them) or WordPress.org (hosted on your server)
    Squarespace
    Wix
    The reason is that these companies have fully operational, nicely designed web site templates that you just fill in with your words and pictures, and they are ready to go. They also give you these benefits:
    Already designed to the latest web standards
    Already designed to resist hackers
    Already designed to work on all browsers
    Already designed to automatically adjust the page for readability on desktop, laptop, tablet, and smartphone screen sizes
    Already designed for accessibility
    Already designed for Search Engine Optimization so that your page will be found on Google
    Already designed with social media links built in if you want
    It is not like the old days where you build a site in Front Page and you assume it will only be seen on a desktop computer. If you build it yourself with a web page program, do you have the knowledge to make a site that works on all of the different web browsers and mobile devices, and is friendly to search engines and social media? If you don't have those skills, working with a website company can be a lot better, faster, and more reliable than trying to hammer all of that out yourself using code in some app.

Maybe you are looking for