Upgrade to "R/3 4.7" to "ERP6.0".

Dear All,
Currently "BI 7.0" and "R/3 4.7" are connected.
And I plan to upgrade "R/3 4.7" to "ERP6.0".
But After I upgraded to the "ERP 6.0" and "BI7.0" in connection with a problem is fear.
Could you please teach the following poitns.
①Upgraded from "4.7" to "ERP6.0" when the problem occurred?
②Others point to a cautious?
Best regards,
Ko

Hi,
Yes, there is away to deactivate new depreciation calculation/enterprise asset management module even though EA-FIN is switched on in ERP 6.0. Below are essential details from SAP help before upgrade to ERP6.0 for your perusal.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/44/558b1099c93672e10000000a114a6b/frameset.htm
Happy upgrading...
Kind regards,
John Chin

Similar Messages

Rounding net book value - Depreciation calculated even 0%

Dear all,
I'm becoming crazy with ERP6.
We are upgrading our SAP from 4.7 to ERP6, EA-FIN is active.
Now if I look the asset explorer or whatever FI-AA reporting with the planned depreciation, I have a difference on the depreciation values, but only for lands ( Depreciation key 0000) - We have set "round net book value at the end of the year", but It seems that now, the system rounds the net book value, even if the depreciation key is 0% . (not the case in 4.7)
please advice
Thanks
nat

Hi,
This has nothing to do with the depreciation key.
If you have flagged in tr. OAYO the following rounding specifications:
Ind: Round net book value
This indicator specifies that the net book value of an asset should be rounded to whole units of currency at the end of the fiscal year.
You specify the type of rounding in the same screen. ...."
.....the system makes this rounding.
But this was also the same in former releases.
regards Bernhard

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

ERP6 upgrade, PREPARE error

Hello!
Have anyone seen this PREPARE error message before?
During phase RUN_RSPTBFIL_PREP, error message "2EETG011 Kein Upgrade aktiv".
I can't find any SAP note about this specific problem. The source system is 4.6B, the target will be a non-unicode ERP6 SR3, the os/db is AIX53/ora102.
//Fredrik
root@serverX:/usr/sap/put/log:more RSPTBINI.LOG
1 ETQ201XEntering upgrade-phase "RUN_RSPTBFIL_PREP" ("20080923124421")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
4 ETQ010 Date & Time: 20080923124422
4 ETQ265 Starting report "RSPTBFIL" with variant "SAP_PRP_PUTTB" in batch
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_REPORT_IN_BATCH" by RFC
4 ETQ234 Call of function module "SUBST_START_REPORT_IN_BATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ311 Batch job "RSPTBFIL" with job count "12442401" scheduled
4 ETQ359 RFC Login to: System="SNB", Nr="00", GwHost="serverX", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20080923124428
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ399 ext. env.: DIR_LIBRARY=/sapmnt/SNB/exe
4 ETQ399 ext. env.: LIBPATH=/sapmnt/SNB/exe:/usr/lib:/lib:/usr/sap/SNB/SYS/exe/run:/oracle/SNB/102_64/lib64
4 ETQ399 2008/09/23 12:44:29: put_execute: (tp) forkpid:2142240
2EETQ241 Errors found in logfiles - accumulated in file "RSPTBINI.ELG"
1EETQ203 Upgrade phase "RUN_RSPTBFIL_PREP" aborted with errors ("20080923124430")
root@serverX:/usr/sap/put/log:more RSPTBINI.ELG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB initial filling ERRORS and RETURN CODE in RSPTBPTB.SNB
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETG011 "Kein Upgrade aktiv"
2EETG011 "Kein Upgrade aktiv"
root@serverX:/usr/sap/put/log:

Hello Andreas, old friend from e-motion technology!
I did open a OSS-case some days ago, and we rerun the phase successfully.
I'm now waiting to hear from SAP-support, what they did, with their magic sticks, to fix this issue.
//Fredrik

ERP6.0 EHP7 Upgrade error in phase PARCONV_TRANS

Hello,
If you have any idea or information , I hope your help!!
I'm upgrading ERP6.0 to ERP6.0 EHP7.
I have encountered the error in MAIN_TRANSEXEC/PARCONV_TRANS.
The error mesaages is like this:
Detected the following errors:
# Y:\SUM\SUM\abap\log\NCONV00.Q4R:
4 EDA093 "DDL time(___2):" ".........1" milliseconds
2 EGT066 Request for "/BA1/F4_RELEASE" executed successfully
1 ED0327XProcess..................: "MKIGTT01_10_15604"
2 EGT052XRequest: Create "Index /BCV/D_SSHOTT-SID (DDIC/10.07.14/20:12)"
3WEGT122 Nametab of table "/BCV/D_SSHOTT" with status "A" does not exist
2EEDA127 Table "/BCV/D_SSHOTT" for index "/BCV/D_SSHOTT~SID" does not exist in the database
2EEGT082 "Index" "/BCV/D_SSHOTT-SID" could not be created
2 EGT067 Request for "/BCV/D_SSHOTT" could not be executed
1 ED0327XProcess..................: "MKIGTT01_10_15604"
2 EGT052XRequest: Create "Index /BOBF/DM_LTXT_C-PAR (DDIC/10.07.14/20:12)"
3WEGT122 Nametab of table "/BOBF/DM_LTXT_C" with status "A" does not exist
2EEDA127 Table "/BOBF/DM_LTXT_C" for index "/BOBF/DM_LTXT_C~PA" does not exist in the database
2EEGT082 "Index" "/BOBF/DM_LTXT_C-PAR" could not be created
2 EGT067 Request for "/BOBF/DM_LTXT_C" could not be executed
...skipped 4006 more lines.
Please see PARCONV.html for more information.
I checked the table status. There were no database tables.
This is my second upgrade of EHP7. At first time , I choosed 'Starard' mode.
At this time I choosed 'Single System'.
I activated one table(/BA1/F4_RELEASE) and repeated phase , then passed its table.
But there are almost 1,300 talbes.
Is this bug of 'Single System' mode ?
Or is there any solution?
My configuraion is
OS: WIndows 2008 R2
DB: SQL Server 2008 R2
CPU: 2
memory: 16GB
Best regards,
Naritoshi AOKI

Please don't use Single System mode for EHP7 Upgrade.
1926261 - Central Note - Software Update Manager 1.0 SP11 [lmt_007]
As per this note,
Part C: General Problems / Information
I/ Important General Information
a) General
--------------------< D024828 JUL/07/2014 >-----------------------------
No Single System mode for target release >= SAP_BASIS 740 SP5
The preconfiguration mode Single System cannot be used for systems with a SAP_BASIS target release 740 SP 05 or higher.
Best regards
ashish

Error during upgrade from sap R3 4.7 ext 110 to ERP6 EHP4

Dear all
we doing an upgrade in test server to ERP6 with EHP4,source release is sap Entreprise 4.7 110.We have copied all the required DVDs to the server .During the configuration phase while giving the EHP package we got the error.
EHP_INCLUSION.log details
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100915210509
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_APPL' ...
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DE'
4 ETQ359 RFC Login to: System="MBD", Nr="00", GwHost="saptest", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BS_FND', release = '701', package = 'SAPK-701GGINSAPBSFND', type = 'AOX'
4 ETQ399             (not usable, different component
4 ETQ399 ... No matching package found.
Is this related to the current SAP_APPL support pack version ?.currently we have
SAPKH47031 SP 31 for SAP_APPL 4.70
Regards
Shahnas.S

> i have few questions regarding above
(Almost) all of your questions are answered in the note:
> 2.Do wee need to apply the above note for non-unicode upgrade
<...>
Even on non-Unicode system you should replace all matchcodes that are still required by search helps.
<...>
> 3.Note 1330256 recomends to apply support pack or to apply the Note 1330256 ,but we can do it only at upgraded version.
Yes - it avoids dumping with the dump mentioned in the note
> 4.How to identify the matchcodes
<...>
You can use the program TWTOOL01 to determine the existence of matchcodes.
<...>
> 5.How to delete them
<...>
You can then use the function module DD_MCOB_DEL to delete matchcode objects, and the function module DD_OBJ_DEL to delete matchcode IDs.
<...>
> 6.Impact of deleteing matchcodes
None since they were replaces by search helps.
Markus

Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5

Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh Jagtap

Dear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek

Error in Phase START_SHDI_FIRST for Upgrade to ERP6 SR3

Hi Folks
We are performing a test upgrade 46C to ERP6 using the SR3 CDs and I'm stuck at the START_SHDI_FIRST stage.
It's not the "usual" .acl problem.
Here is an excerpt from the SAPup joblog. I also get the same result if I logon as <SID>OFR add the 700 Kernel and use STARTSAP.
Calling STRRMTDB...
Environment variable does not exist.
Environment variable added.
Job 029650/P01OFR/STRRMTDB submitted to job queue QBATCH in library QGPL.
Environment variable removed.
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
Start profile is "/usr/sap/put/P01/SYS/profile/START_DVEBMGS38_tegerppd".
Executable directory is "/usr/sap/put/exe".
Checking Kernel...
Ownership of object GETOBJINF in QTEMP type *USRSPC changed.
StartInstance: Program STRSBSJOB does not exist (ILE).
O4STRSAP: Starting instance 38 of system P01 on host tegerppd failed.
Errors occurred in command.
Errors occurred in command.
STRSBSJOB does exist in the Kernel library and appears in /usr/sap/put/exe as a link.
Not sure where to go from here.
Any suggestions?
Thanks
Steve

Hi Steven,
I think, you are trying something forbidden here ;-((
You are in the uptime and try to use STARTSAP for the new kernel, which is not ok.
The correct way to start the shadow is as follows:
- logon with sidofr
- addlible sapup
- check, that the shadow instance is totally down - otherwise kill all processes there
(you could use (try) the following instead as well:
   SAPUP UPGDIR('/usr/sap/put') PARMLIST('stopshd')     )
- SAPUP UPGDIR('/usr/sap/put') PARMLIST('startshd')
Then it is interesting to see the errors ....
btw:
the well-known error is really not there ?
edtf '/usr/sap/put/X85/SYS/global/ms_acl_info'
HOST = *      <<< correct
Then, I do have the next idea as the new second in future "well-known-error":
The locales in the OS will miss for DE and/or US ;-((
In the old kernel, this was no issue, but now, SAP changed its mind and doesn't deliver them as fallback any more ;-(
(note 1077496 tries to explain this change, but I was not able by now to understand this note or to see that it really works like this - especially as I never have the chance to install complete further languages just for this !!!)
My check is always:
Please check with CALL QP2TERM: (NOT QSH!)
cd /usr/lib/nls/loc
ls en*
ls de*
(normally in this directory there are links only, but you can place true
locales here as well)
You need at least the following ones:
en_US.ISO8859-1
en_US.ISO8859-1__64
de_DE.ISO8859-1
de_DE.ISO8859-1__64
=> I do have all needed locales for download and place them (a bit illegal) into /usr/lib/nls/loc - if you are interested in this, let me know.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Upgrade from 4.6C to ERP6.0 EHP4 NW7.01 fails on EHP_INCLUSION

Hello dear friends at SDN forums,
We are performing an upgrade from a 4.6C Non Unicode source release to a SAP ERP 6.0 EHP4 based on NW 7 EHP1 Non Unicode.
Every phase has gone more or less fine until the current phase EHP_INCLUSION in SAP EHPI tool.
We are trying to specify the stack file manually, cosu00B4 SAP EHPI does not find it automatically via RFC against Solution Manager. I donu00B4t discard a possible missconfiguration in the RFC destination "BACK" configuration (the one that points from our target system to the Solution Manager), but thatu00B4s another story.
Anyway, that shoulnu00B4t be relevant for the trouble Iu00B4m expressing.
As we are on source release 4.6C I must make use of the .txt stack file and not the .xml file, as per SAP notes.
The symptom: everytime I retry that EHP_INCLUSION phase, it complaints about "Sever errors detected. Error Code = -1. Reason: The stack configuration does not contain a product stack".
Iu00B4ll also paste here the contents of the EHP_INCLUSION.log trace file:
1 ETQ201 Entering upgrade-phase "EHP_INCLUSION" ("20100715150020")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "D:\usr\sap\CES\SYS\exe\run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPR3
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "
dbapru001\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20100715150020
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20100715150024
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "C:\SMSDXML_CES.txt"
4 ETQ230 Starting RFC Login to: System = "CES", GwHost = "dbapru001", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CES", Nr="00", GwHost="dbapru001", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration does not contain a product stack")
That file was generated from Solman Mopz, was saved with a short path name just in case it could be problematic.
The Solman is on version NW 7 EHP1. Our 4.6C SPAM version is 50 (the latest available).
Iu00B4ve been fighting this issue for several days unsuccessfully, and it seems like thereu00B4s no documentation on it.
Iu00B4ve re-read SAP notes , master, EHP and upgrade guides several times, and also similar problems (but not exactly the same as mine) here at SDN forums.
Besides, now Iu00B4m having a problem to create customer messages to OSS which will last a few days (due an issue with our old installation number in SAP Service Marketplace). Thatu00B4s why Iu00B4m trying to obtain support from this forum, before we can obtain a response from SAP OSS.
Has anybody experienced something similar?
Thanks in advance for your help.
Javier

Hi FDK,
As far as I´m concerned, I promise I will write how we solved it when we get it.
The news are: at last we could create a customer message to SAP Support, and SAP has told us to:
1) Ensure that our Solution Manager is in a sufficiently high SP Stack level. In our case, as we have a Sol. Manager based on NW 7 EHP 1 with SP Stack level 20, they are asking us to apply SP Stack level 22 as first meassure.
2) In case we cannot afford to do the mentioned meassure immediately, then they suggest us another possibly working option: to downgrade our SPAM 4.6C from level 50 to 48. There is a SAP Note that explains how a reimport of a Support Package for SPAM can be done (and it seems like it´s even possible to downgrade the SPAM level, I didn´t know that):
SAP Note 684564: Re-importing a SPAM/SAINT update
So, now we are working on these suggestions. As the Solution Manager is really not "ours", but belongs to our SAP VAR (partner), we need to wait until they can schedule this technical task.
So, right now the immediate task I´m trying to perform is downgrading our SPAM 4.6C from level 50 to 48.
But, I have a problem and have just let know it to SAP in the customer message: I have no way to get such level 48 of SPAM 46C. SAP always only hosts the last (or the 2 most recent as much) version of SPAM in the Software Download Center of SAP Service Marketplace. Thus, right now if you navigate in SAP Service Marketplace you´ll only find the 50 level version of SPAM 4.6C. I´m again waiting for SAP ´s response concerning this.
Best regards,
Javier

Upgrade erp6 to ehp3--- error ddic

im trying to upgrade ecc6 to ecc6 ehp3
i have import SAPK-603DHINSAPAPPL
and SAPK-603DHINEAAPPL
togther- and get error in the and of it/
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPK-603DDINEAAPPL, tp step "A",
return code 0008
i read note 822380
and after that 791984,1015068
1022755
but still cant find the cuese of thise error
in the log i find:
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPK-603DDINEAAPPL, tp step "A",
return code 0008
indexes 001 and KEY for table PFO_GO_00IS have identical fields
need help here please
yossi:-)

There are some solutions given here. You can follow them
The Add-on installation terminated during phase DDIC_ACTIVATION
http://sapbasis2407.blogspot.com/2010/01/ecc6-ehp3-upgrade.html
Regards,
Subhash

Upgrade to ERP6.0 EHP4: Error in phase EHP_INCLUSION

In my upgrade from enterprise 4.7 ext.set 11.0 to erp 6.0 ehp4 I have the error:
Please specify a valid Enhancement Package stack configuration. The ADD-ON and
Support Package selection in the IS_SELECT and the BIND_PATCH phases is taken
from there. For more information, see SAP Note *1022704* .
01) * Cancel dialogue
02) - Repeat stack request from MOPZ (failed with 'No access to Solution Manager System')
03) - Provide stack configuration file in input field below
Select configuration:: Cancel dialogue
I don't want to include any further EHPS. Do I have to extract all packages from DVD EHP4_for_SAP_ERP6.0_NW7.01_Enhancement_Package (mat no 51033594)
Do I have to generate a sp_stack.xml, too ?
EHP_INCLUSION.LOG:
1 ETQ200 Executing actual phase 'PREP_EXTENSION/EHP_INCLUSION'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONEHP.DMP'
2 ETQ399 Arg[1] = 'NAVERSEHP.DMP'
2 ETQ399 Arg[2] = 'SPDA_EHP_INCLUSION.LOG'
2 ETQ399 Arg[3] = ''
2 ETQ730 Starting upload of all package files in "\\<transporthost>\sapmnt\trans\EPS\in"
4 ETQ010 Date & Time: 20090528151215
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_PREPARE_PATCH" by RFC
4 ETQ234 Call of function module "SPDA_PREPARE_PATCH" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090528151216
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "T10", GwHost = "xxxxxx", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="T10", Nr="00", GwHost="xxxxxx", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
Any ideas ?
Edited by: Uta Hedemann on May 28, 2009 3:40 PM

Hello,
We are performing an installation of EnhP4 with 7.01---SP stack 3. We are not able to continue from the error below. I am able to view the xml file from however SAPehpi is saying the file u201CError reading stack info (rc=3, reason="Stackfile not foundu201D.
I am not able to download another stack from Solmanu2026I am not able to select any Technical Usages to download the files for the stack version.
Any ideas?
EHP_INCLUSION.LOG
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
4 ETQ399 EhP stack selection ...
4 ETQ399 ... requesting stacks from Solman/MOPz ...
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_STACK_SELECTION" by RFC
2 ETQ399 Returned table ET_STACKTAB:
4 ETQ399 Reading stack content ...
4 ETQ399 ... reading stack configuration file "D:\EHP4_packages\SMSDXML_CER_20090924145226.720.xml"
4 ETQ230 Starting RFC Login to: System = "CER", GwHost = "HOUAPPL677", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="CER", Nr="00", GwHost="HOUAPPL677", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC
2 ETQ399 Returned table ET_STACK_NCVERS:
2 ETQ399 Returned table ET_STACK_PACKAGES:
4 ETQ399 ... Error reading stack info (rc=3, reason="Stackfile not found")
Regards,
Anthony

SAP ERP6 product version missing in SMSY for EHP4 upgrade Solman 7

Hello
I am trying to install Ehp 4 but when i try to create the new system as SAP ERP6 in solution manager (SMSY )but product version is missing ?
iam now stuck any ideas will be welcome as i need to get the stack.xml inorder to proceed with EHP installer

Hi,
Check below notes before proceeding with EHP download in solman,sap has recommaned to apply these notes when we tried to download EHP,
Must Implemeted
1238929 MOPZ: Solution Is Not Selected in Work Center
1240389 Maintenance optimizer transaction with incorrect Java host
1243197 MOPZ: Add Caption for Product and Stack of Stack Delta XML
1246549 Status were reset to step 1 after Download Basket approval
1247550 present all avaliable systems in mopz step 1
1250781 SMSY: Error for Java system components from the SLD
1255219 Java systems w/o ABAP instance in maintenance optimizer
1262239 SMSY: Database name *LOCAL
1273095 SMSY: Incorrect database server (Java)
1306173 Maintenance Optimizer: Enhancement Package Stacks
1308152 MOPZ: Check configuration for stack delta XML generation
1311841 Maintenance Optimizer: Rename stack delta index file
1319083 Maintenance Optimizer: Technical corrections
1326123 MOpz: Error "Update product data in Solution Manager"
1357565 MOpz: Maintain a system where EHP is installed
1402615 Translate hostname in Mopz to lower case
1407905 MOpz: Error when withdrawing in step 4
Cannot be implemented, but manual steps must be performed.
1141296 Solution Manager: ERP product data missing
1165587 Maintenance Optimizer: Enhancement Package stack selection
1277035 Solution Manager: EHP4 product data missing
Between what is your present stack level of solman
Regards
Uday

Risks in NOT upgrading to ERP6.0

Hi,
Can anybody exaplin the risks and the demerits in not upgrading from 4.7 to 6.0.
Regards
Prabhu

- You will have to pay increased maintenance fees, if you don't buy extended support you will not get legal change updates any more (e g. for FI or HR)
- old technology being used
- necessary business cases may not be able to put easily into the system
- other systems may not be able to connect to 4.7 any more (e. g. new SRM, CRM etc.)
- third party software you may use may run out of support
Markus

Error while applying EHP4 to ERP6.0-phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!

while i was applying EHP4 to my ERP6.0 system using Enhancement Package Installer i got the following error in the Downtime roadmap:
Severe error(s) occured in phase MAIN_NEWBAS/JOB_BATCHCHECK_XPRA!
Last error code set: RFC_ERROR 2: DUMP_ERROR
i checked the RSUPGBWD.LOG and here is what i found:
1 ETQ201 Entering upgrade-phase "JOB_BATCHCHECK_XPRA" ("20110503131506")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPSR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ200 Executing actual phase 'MAIN_NEWBAS/JOB_BATCHCHECK_XPRA'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'RSUPGBWD'
2 ETQ399 Arg[1] = ''
2 ETQ399 Arg[2] = 'IGNORE'
2 ETQ399 Arg[3] = 'RSUPGBWD\.$(SAPSID)'
2 ETQ399 Arg[4] = '3'
2 ETQ399 Arg[5] = 'Batch execution checker'
2 ETQ399 Arg[6] = 'RSUPGBWD.ELG'
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ010 Date & Time: 20110503131506
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ260 Starting batchjob "RSUPGBWD"
4 ETQ230 Starting RFC Login to: System = "ERD", GwHost = "erp-dev", GwService = "sapgw00"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPGBWD', REPNAME='RSUPGBWD', VARNAME='', BATCHHOST='erp-dev', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='13150600'
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20110503131509
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPGBWD\.ERD"
2EETQ262 Batchjob "RSUPGBWD" aborted
4 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
5 ETQ359 RFC Login to: System="ERD", Nr="00", GwHost="erp-dev", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
i also check ST22 for the error and i found this:
Runtime Errors         CALL_FUNCTION_CO
Date and Time          03.05.2011 13:15
Short text
     RFC error when sending logon data.
What happened?
    An error occurred when executing a Remote Function Call.
What can you do?
    Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred when executing a Remote Function Call.
    Status of connection.... "-"
    Internal error code.... "-"
How to correct the error
So any clue with that error?

Hello Waseem,
I would recommend to update to the latest disp+work but also check in sm21 and find the work process that encountered the error. Then see in the corresponding work process trace file dev_w* for the real error that occured.
e.g. If you see ERROR => RFC Signon> Failure in ab_MakeTicketSndExternal calling
check note 1532825
and the report RS_TT_CLEANUP_SECSTORE
Regards,
Paul

Upgrade to "R/3 4.7" to "ERP6.0".

Similar Messages

Maybe you are looking for