Upgrade to SCCM R2 have to recreate boot image and TS

Wanna ask, I have upgraded from my SCCM from SP1 CU3 to R2. But i noticed that in boot image, the WinPE tab is missing thus i cannot include the network driver. Anyway that i can make the tab reappear again? Net says have to recreate the boot image and TS...
http://www.deploymentresearch.com/Research/tabid/62/EntryId/117/A-Geeks-Guide-for-upgrading-to-ConfigMgr-2012-R2-and-MDT-2013.aspx

This often happens after R2 upgrade. If your boot image does not have 6.3.9600 version then you will not be able to manipulate it using the R2 console. You don't need MDT to create a new one though (this new version).
You can use dism. See here. It's very easy. I had to do it yesterday.
http://www.niallbrady.com/2013/10/09/how-can-i-manually-add-winpe-5-boot-images-to-system-center-2012-configuration-manager-sp1-cu3/
http://myitforum.com/myitforumwp/2013/08/01/how-to-create-configmgr-2012-boot-images-from-scratch/
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Similar Messages

MDT boot image and when we try to PXE boot it won't get the IP Address.

We created a custom MDT boot image and when we try to PXE boot it won't get the IP Address.
I press F8 and type IPCONFIG we get Windows IP Configuration. We are using vmxnet3 network adapter.
I think I need to inject 32-bit vmxnet3 driver to the custom MDT boot image which is 32-bit.
We are using it to deploy Windows Server 2008 R2 with SP1 operating System.
Can I just use the 32-bit custom MDT boot image or do I need to use 64-bit Custom MDT Boot Image?
Also Is there a blog on how to inject vmxnet3 driver to boot image?

You can try this:
http://mwesterink.wordpress.com/2013/12/03/configmgr-2012-obtaining-vmxnet3-nic-drivers-for-vmware-virtual-machines/
Honestly, your best bet is to use a different adapter (E1000). I personally have had no luck getting the vmxnet3 driver to work properly in WinPE. It's either really, really slow or it simply doesn't load at all.

I seem to have lost my original images and unwanted images have moved into my library. I couldn't access lightroom 3 as usual and was provided a default option which I clicked. I ely heavily on lightroom and have spent countless hours fixing images, ple.

Hi, I seem to have lost my original images and unwanted images have moved into my library. I couldn't access lightroom as I would normally and was provided with a default option which I clicked. This all occured while I was trying to free up space on my computer while viewing saved images on my hard drive, which are linked up directly to a photoshop elements program. Please tell me this can be fixed.....

Hi there,
I don't believe I did move or delete my catalogue. Where can I look for my catalog file. Why does my Lightroon now contain more images and ones I don't want on it, without my physically importing them?
Thanks
Pablo

Mdt integration boot image and SCCM boot image

I created a MDT task sequence in SCCM and went through all the steps for setting up the toolkit and settings and boot image. After all that, I distributed everything to my DP. When i try to boot to pxe and run that new MDT task sequence it finds the pxe
server, but just sits at "Contacting server" for some time until it times out. If I select the SCCM boot image in the task sequence properties then it works. the one created when i create the task sequence doesn't.
Any Idea?

Sounds like you didn't enable the boot image for PXE. This is a checkbox at the bottom of the Data Source page in the properties of the boot image.
Have you reviewed smspxe.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after and extended period of time please help

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

SCCM 2012 Matching Processor Architecture Boot Image (0) not found

SCCM2012 SP1 ,One Site, 3DP.
one DP can not install os with PXE boot. when start PXE F12, system crush with code 0x00000f. and Log like this
"00:0C:29:90:D1:C0, 291241B9-AB25-4400-B746-99E018F70F1A: device is in the database. SMSPXE 2014/10/1 2:28:11 4504 (0x1198)
Warning: Matching Processor Architecture Boot Image (0) not found SMSPXE 2014/10/1 2:28:11 4504 (0x1198)"
The BOOT.wim file works well in ither DP.
I have try to redeploment the PXE and reload the Boot.Wim file in this DP, but can not reslove this problem.
I'm afried reset the Boot.wim will take other 2 DP can not work too.
Please Help.

Hi Pazza,
As Torsten said, please ensure that you have an x86 and x64 boot image configured and deployed, regardless of the architecture of the OS that
you wish to deploy. Secondly, ensure that the boot images for both architectures have the network drivers for the respective model that you are imaging injected.
Otherwise, please review the link below:
ConfigMgr PXE Boot Warning: Matching Processor Architecture Boot Image (0) not found
http://www.systemcentercentral.com/configmgr-pxe-boot-warning-matching-processor-architecture-boot-image-0-not-found/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012: PXE deploy: import boot images?

Hi,
We fully configured sccm 2012 and did osd via bootable media. Now we want to configure PXE.
We enabled it (http://prajwaldesai.com/deploying-sccm-2012-part-14-build-and-capture-windows-7-64-bit/).
My questions:
*Is that all that needs to be done?
*It seems to me we need to import boot images in WDS?
*If we do, which to import then (both x86 and x64 probably) + there is a winpe and a winpe.....wim made by sccm, which one to import then?
*on DHCP we change the boot server hostname but what about the bootfile name, what is the path of that? \boot\x64\wdsnbp.com?
Please advise.
J.
Jan Hoedt

I keep on getting TFTP open timeout
I find in smspxe.log that it reaches to the SCCM-server but then something goes wrong. Not sure what.
How can I troubleshoot find more info, please advise?
00:51:55:2A:5C:C5, 0A190A42-FFDe6-5e69-9e41-70e481B852E3: device is not in the database.   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
Getting boot action for unknown machine: item key: 2046820352   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONEX   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
CLibSMSMessageWinHttpTransport::Send: URL: oursccmserver.prod.ourcompany.be:80 CCM_POST /ccm_system/request   SMSPXE   21/03/2014 16:10:08   2720 (0x0AA0)
Jan Hoedt
Note: what I also can see:
Client IP Address: 000.000.000.000
Your IP Address: 000.000.000.000
Server IP Address: 000.000.000.000
Relay Agent IP Address: 000.000.000.000

Task Sequence Failing after Stating Boot Image and Restart in WinPE - Windows XP to Windows 7

Good Morning,
I am trying to upgrade an XP Machine to Windows 7 (x86). I was using the boot image inbuilt with SCCM 2012 R2 but read that it wont work correcltly. I am using Windows PE 3.1 boot image to boot.
The TS fails after trying to restart in Windows PE when staging the boot image.
From the Logs in CCM\Logs\SMSTSLog
I am still getting the same issue as when i am using the Boot image from ADK 8.1.
Anybody has an idea on how to solve this issue ? I have read a workaround about replacing the bootsect from the boot image but funily i am using an older boot image.
Kind Regards,
Mathieu

http://support.microsoft.com/kb/2910552
Torsten Meringer | http://www.mssccmfaq.de

Upgrading APEX from 3.2 to 4.0 images and buttons not displaying correctly

Database 11.2.0.1
APEX: 3.2.1
Attemping to upgrade APEX from 3.2 to 4.0. The installation script runs fine and updates the database successfully. I run the .sql to import the images and it ran successfully however when I attempt to access the APEX home page, the images are not loaded and the buttons don't do anything. I did some research through google but did not come to anything that resolved my issue. Does anyone have any ideas?
Thanks for your time...

If you are using mod_plsql, you need to run @apxldimg.sql script with SYS user file present with Apex installation. Also provide the location of your apex folder as parameter to this script.
Habib

When have multiple layers, move images and text all starting from background layer

Greetings
I have an image that has some 24 layers, many of these are text. When trying to move the images and text all on the same layer yesterday, I ran into problems, but eventually fixed by moving these items starting from the background layer, by using Ctrl\Move.
This worked so well that I thought I would show my fellow learners at our regular Friday session on Elements 11 at SeniorNet. However when I went to show them I could move easily and freely on the background layer - without using Ctrl, just the move tool. Elements simply moved very quickly from the background layer to the relevent layer with the image or text (as before ?).
Cannot understand why I could not do that in the first place at home, but I had lots of tries there. What circumstances could have been different ?

Did you have "Auto Select Layers" ticked on the tool's option bar?
It is not clear to me what the ultimate goal of your demonstration is. You can combine the 24 layers into one layer (referred to as stamp visible layer) without flattening the layer structure. To do this, do the following:
Open a blank layer at the top of the stack of layers in the layers palette
Press CTRL+ALT+SHIFT+E on the keyboard
You can work on this stamp visible layer. The layers below will not be impacted. If you don't like what you have done, simply delete the stamp visible layer, then start over.

Since upgrading to maverick I have had problems syncing contacts and calendar between devices

After recent apple support ref:532791559 my macpro will exchange these items between icloud and macpro but now I find I cannot exchange data between my iphone (IOS7) and ipad (IOS7)
In above apple support created new accounts etc to arrange connection but now I have lost the other two items. All three were working perfectly with icloud before updating. Sorry Apple but this is a blunder!!!

Hi,
Thank you for taking an interest in my problem.
What actually transpired was my Macpro (contacts) would not update after I put changes in to contacts in either iphone or ipad. Apple checked and discovered that changes made in either macPro (contacts) and contacts(cloud.com) did not talk to each other so concentrated on this.
The rep had me signout of my macpro user account, and create a temp new user to which I signed into my icloud account as normal. Then, changes in either macpro or cloud.com now worked. He then did some changes at his end and after exiting the temp user and resigning in as origal macpro user this now made changes to each other. OK. We then deleted the temp user and this worked! but since then I have discovered that iphone and ipad now do not change icloud.com contacts or calendar so would not of course change contacts on macpro!
Other services on icloud (photo stream, mail, docs and data, find my ----, etc) all function with my iphone (so have to presume my ipad also, but this is not with me at this time) so the problem is confined to just contacts and calendar.
In summary, I do have only one icloud address but which appears to have two sets of data as the devices will communicate with something but not altogether!!
I am thoroughly confused, especially as it was all fine until I upgraded from M\Lion to Mavericks on my shiny new macpro a few weeks ago. I had moved from Windows to Apple to avoid just such problems.
Not enamoured with Apple at the moment, but thank you for your assistance - hope this is a better explanation.
Kind Regards

HT3986 I have a Macbook Pro, have recently upgraded to OS 7, have installed the bootcamp option, and am not getting any sound with using windows applications.

I am getting no sound with I use windows programs on my Macbook Pro. I am operating with the bootcamp option. The sound works fine with I am running the MAC OS 7
I read that my problem could be a driver, but I am unsure how to get this driver and how to install it.

Read the Boot Camp installation guide http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf. You download the drivers during the installation process. Then you install the downloaded drivers after booting into Windows. You can also go to the source to get the sound drivers for your comuter. Search this forum and you will find posts with the url from which to download the drivers.

Boot Image properties...tabs missing

I updated our SCCM system to R2 yesterday...today when I went in to edit a boot image I no longer see the "drivers" tab...it seems like there are other tabs missing as well, just can't remember. Don't know how to add drivers to a boot image
now.
Server 2008 R2
SCCM 2012 R2

This is a common problem. It came up on the forum yesterday as well.
http://social.technet.microsoft.com/Forums/en-US/a42ab116-63f1-431b-a42c-f31f2bdf0896/upgrade-to-sccm-r2-have-to-recreate-boot-image-and-ts?forum=configmanagergeneral
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

2 questions - missing boot image, create mdt task sequence button missing

I'm learning SCCM 2012. I am watching a training video and the instructor shows a "Create MDT Task Sequence" button at the top of his ribbon bar when going into Task Sequence. I do not have this button - where did it go? I am
using 2012 SP1.
All I see is "Create Task Sequence" and "Create Task Sequence Media" but not "Create MDT Task Sequence".
Also - I only have an x86 boot image, and no x64. How do I get this into my inventory?
Thank you
Nathan

"Create MDT Task Sequence" will be visible after you install MDT and integrate it to SCCM.
MDT is different product and not part of default SCCM installation.
You can integrate MDT to SCCM to create advanced Task Sequence if the default is not suitable for your needs.
Integrate MDT to SCCM.
MDT latest version is 2013:
http://www.microsoft.com/en-us/download/details.aspx?id=40796
For creating x64 boot image:
http://social.technet.microsoft.com/Forums/en-US/a3877a66-d35c-49ca-95c5-1c02d1611f2f/default-x64-boot-image-not-created-during-sccm-2012-setup
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

SCCM 2012 SP1 Boot Image

Hi Guys,
We upgraded to SCCM 2012 SP1 from the RTM yesterday and now our OS Deployment has stopped working. I have tried to update the DP's with the boot images and it keep failing to add drivers. I have also tried to add a Boot Image but this failing.
Any suggestion on what might be going wrong? Our upgrade processed completed successfully.
Kind Regards
TPark IT Technician

Hi,
I have removed all the drivers and I am now getting the following error.
Error: Boot image to update:
Microsoft Windows PE (x86)
　Error: Actions to perform:
Add ConfigMgr binaries
Add custom background
Enable Windows PE command line support
Optional components:
Scripting (WinPE-Scripting)
Startup (WinPE-SecureStartup)
Network (WinPE-WDS-Tools)
Scripting (WinPE-WMI)
　Error: The wizard detected the following problems when updating the boot image.
The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Failed to insert OSD binaries into the WIM file";
ErrorCode = 2152205056;
File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\sspbootimagepackage.cpp";
Line = 4630;
ObjectInfo = "CSspBootImagePackage::PreRefreshPkgSrcHook";
Operation = "ExecMethod";
ParameterInfo = "SMS_BootImagePackage.PackageID=\"ASH00001\"";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
I am only trying to Deploy Windows 7 images currently but we are looking to upgrade to Windows 8 at Christmas. Can I import a boot image from a Windows 7 or Windows 8 cd?

Upgrade to SCCM R2 have to recreate boot image and TS

Similar Messages

Maybe you are looking for