Upgrade to SD 1.2 lost connections

I just upgraded to SqlDeveloper 1.2 and I have lost all the connections. This is a windows environment. (In Linux it worked fine.) Any idea how can get back all my old connections?
Thanks
Mike

I found in the sqldeveloper directory -> system -> oracle.jdeveloper.db.connection a file called IDEconnection.xml that holds the connection information. Unfortunantly, it looks like in Linux it creates a directory with a different number and retains the old one. In Windows, there was on one directory.
Mike

Similar Messages

  • Upgrading to 10.0.1 lost connection to remote speakers on Airport Express

    after upgrading iTunes 10 to 10.0.1 the name of my airtunes speakers connected to Airport express (Firmware 7.4.1)is visible in iTunes but won't play music (error -15000).
    Same observation in two of my PC (Windows 7) laptop/Netbooks.

    Solved the problem. Uninstalled iTunes completely. Restarted. Reinstalled iTunes 10.0.1. Said allow to the firewall setting changes. Done. Connection to remote speaker regained.

  • Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

    Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2?  My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now.  I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
    I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
    Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service".  My iPhone 5 works perfectly on iOS 8.1.2, on Cellular.  I've browsed the blogs and have tried Apple's suggested fix, all to no result. 
    Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
    I've filed a report with Apple, along with a request that they contact me, but no results yet.
    Help? (and thank you).

    Hello razmee209.  Thank you for your response.  I spent the better part of yesterday working with Apple Support.  They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total.  Same problem.  I restored from the cloud to recover my apps, same problem.
    AT&T installed a new sim card - same problem.  I spent time with AT&T Support yesterday, too.  In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
    I didn't have this issue before I upgraded to iOS 8.1.2.
    Everything else with the iPad works fine:  WIFI, Personal Hotspot, email, all my apps, etc.
    In browsing the web for this issue I see that many other folks have the same problem.  I filed a report with Apple this morning, requesting that they contact me, but no word yet.  I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
    At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
    Thanks again for your response and suggestions.

  • Nokia Ovi Suite has lost connection with your devi...

    5 months has passed and many hours on the phone to Nokia. The phone has been completely reset /reboot by Nokia time and time again and still the phone gets this message when trying to update software..."Nokia Ovi Suite has lost connection with your device"....We were optimistic that the software upgrade would solve the other problems we are having with all the Nokia phones at work. They are all E52's

    Having the same issue currently with an E72 software version is 054.005.266.02 and Ovi Suite 3.1.1.80
    Actually I had connection lost all the time with all previous versions of Ovi Suite too... it has never been reliable.
    Using original Nokia USB cable, connected securely. Tried different PCs, different USB ports, same issue.
    Just now I'm trying software update and it looses connection during the backup process all the time... very disappointing. Screenshot attached if anybody is interested.
    Attachments:
    nokia_conn_lost.jpg ‏40 KB

  • Repeated lost connections when using WRT54g

    Hello everyone.
    I have a Lynksys WRT54g v5 and a cable modem, my ISP is Virgin Mobile. Every half an hour or so my internet connection is lost and can only be regained by reseting my modem by turning it on and off. The lost connections appear to occur more frequently when the traffic is heavier. The interuptions occur even when I only have one wired PC connection.
    If I connect the PC directly to the modem the connection works fine.
    I have already installed the latest firmware, reset to factory settings, tried a MAC address clone as suggested in another thread but nothing has helped.
    Is there anything I can try or should I just bin the router?
    Thanks for your help!

    Version 5 and 6 of this router are of a terrible design. No amount of tweaking, reconfiguration or firmware upgrades will likely help with the disconnect problem. Earlier versions are of a much better design. I had disconnect problems with my version 6 router for over two month which could not be resolved by many attempts through Linksys tech-support. Even replacing it with 2 more version 6 routers did not resolve the disconnect problems which occured 3 or more times a day.
    After I changed to a version 3 of the WRT54G the disconnect problem was instantly cured. Version 4 and below or WRT54GL ( which is really a resurrected version4)should work fine.

  • Lost Connection to C&C Generals Zero Hour Online using the WRT54G v5 Wireless Network

    I have this problem playing Command & Conquer Generals Zero Hour online. I'm using the WRT54G v5 Wireless Network & when I'm in the game lobby, it kicks me off saying, "Lost connection to C&C Generals Zero Hour Online". This happens quite often variing on me entering & exiting rooms or other players entering & exiting rooms that I'm in. But it doesn't occur when I'm accually play a game with someone. It also does not happen at all when I'm connected directly to the internet connection so I know the network is causing it.
    I've never had any problem with this game on any other wireless network types before. I've tried port forwarding with a static IP address, disabling firewalls,  upgrading firmware, etc... No good. I've done some google research & found that varios other people on other forum sites have the same problem, it also occurs on  another computer of mine. 
    Is there some kind of feature on this network that isn't on any others? One wireless network specificly that I've found that the game works on is the WRT54GS.
    Any replies will be greatly appriecitated.
    Message Edited by Me Myself AndPi on 02-20-2008 03:13 PM

    Maybe I would if I hadn't stopped playing the game 3.5 years ago. You may want to check the date on those previous message. But here's what I remember:
    Turns out nothing worked the fix the problem. Not turning of a firewall, not port forwarding, not updating fireware, nothing. There must be a jitter on the routher that triggers the game into thinking it gets disconnected.
    Many other users on the forums posted the same problem with this one router too & no one ever figured out a solution. Eventually that router broke & my family bought the WRT54GS2, which worked perfectly.

  • E4200 - Lost connection

    I did my research, read all the reviews and finally setteled on this router. Setup was a piece of cake. Had it up and running within 5 min. All was good. 2 hrs later lost connection. Tried included software to re-establish connection. No go. Re-connected old dinosaur $59.00 linksys router and everything was good again. Not sure what happened. But it didn't work. I am no expert, all I know is that it stopped working. Going back for a refund tomorrow. What's great about it: Easy initial install What's not so great: It failed within two hrs

    As per the scenario that you explained for that first of all upgrade the Router with the latest firmware which can be downloaded from the cisco website (homesupport.cisco.com)...
    If you want to configure the router with the help of the CD so for that you need to unistall the existing Cisco Connect Software from the computer...
    Reset the Router and power cycle the network...
    Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...
     But if you to configure the Router manually then it will be according to ISP ( Internet Service Provider ) setup... So in that case tell us who is you ISP...

  • I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.

    I have an iPhone 4s in the UK with EE, I recently upgraded to iOS 8 and lost the ability to access cellular data.
    I've upgraded to iOS 8.0.2 with no improvement.
    I've reset network settings on both versions with no positive result.
    I can't rollback to iOS 7 as apple has stopped signing the build.
    I realise the 4s is fairly old tech but this experience has been quite time consuming and incredibly frustrating as I still haven't managed to resolve the issue. I had been holding back to upgrade to the new generation of iPhone but this experience and the negative press has made me seriously consider other options. 

    Here is what you can try,
    Hold both the power and home buttons until the device powers off, may take 10sec. Let go of both as soon as screen goes black.
    Open itunes on your computer and plug in your cable to the computer but NOT the phone.
    Once itunes is open hold down the home button on phone and plug in cable and continue holding home button until you see the connect to iTunes logo on screen. iTunes will give a msg that a device has been detected in recovery mode. Now select restore and do not disconnect until you see your device in iTunes again.

  • Printer just lost connection

    I have been using an Appletalk network printer and this morning it has lost connection!?!?! I just printed to it a few days ago. It is a Xerox printer running through our network here at work. Nothing happened to the actual printer... it is still up and running. This printer is in a work enviroment and can be accessed from other computers in the office. It is weird because I have a different printer that I also use on the network and 2 days ago I lost connection to it as well. I was able to get that connection back. This one won't reconnect though....... I am using a G5 desktop computer running 10.4.5, which I need to upgrade to 10.4.6 but I don't think this has anything to do with it, I use this printer all the time. I have run disk utilities and have deleted and added the printer several times. I did get this while the printer was trying to connect when I added a new one.... nbp_sendfailed got=-1 ...... I have pinged the IP address and it works fine....
    Any help would be greatly appreciated......
    Marc[

    Any luck on a solution to this yet?
    I just had the exact same problem. Printed a couple of hours ago, then nbp_sendfailed error message when I tried to add any printer in the building. None of my existing printers will work.
    OS X 10.4.6
    Lexmark printers
    Nothing new added or changed.
    I have run Disk Utility and Disk Warrior.
    Any other suggestions would be very helpful.
    Thanks.

  • Upgraded to iOS5 and now cannot connect to iTunes Store

    After upgrading to iOS 5, I cannot connect to the iTunes Store.  I was having the problem at home where I was connected to my home network, and now when I'm not connected to a network.
    Suggestions?

    This appears to be an Apple ID issue.  I was forced to change my username to my email (which I had already done years ago) after searching and searching for reasons why my password all of the sudden didn't work on my iPhone.  This started about 3-4 weeks ago. 
    So my password needed to be re-set when I tried to access my iTunes on my computer, and my iTunes balance disappeared.  My username was still my email address (as it had been for years) but my gift card balance was gone and so was ownership of all my apps and music
    Now, after upgrading to iOS5 my ONLY Apple ID now works with the re-set password, but it lost all of my apps.  They are there, but when I go to update them through the iTunes store, I get that "cannot connect to itunes store" error message because after that weird 'update' to my Apple ID it seems to have lost all history I've had with Apple. 
    This is so upsetting, as I'm finding out that Apple does not allow recovery of these purchased items between these ID's.  So, now I'm wondering where in the heck is my "old" apple id??  I can't sign in with my "old" info....
    Lame.

  • Airport express connection - lost connectivity to iPad with iOS6 a while ago now lost connectivity to Mac with iTunes 11.1?

    Many months ago I upgraded to iOS6 and as a result lost connectivity to my old airport express and tried to resest and reconfig.  I gave up on fixing that and was content with the fact that my Mac still had connectivity.  Now with the upgrade to iTunes 11.1 my Mac has lost connectivity.  Am I dealing with an oboslete airport express, or might this be a configuration issue?

    I now have this exact same problem...
    My mac to my airport express was working fine up until I performed the update to iTunes 11.1.  Now when I select the airplay speakers from the drop down menu I get this error:
    The airplay device 'X' cannot be found on your network.  Please verify your network settings and Airplay configuration or select another device.  (Typed out for people who are looking on for this issue on search engines).
    Though my newly updated iPhone on iOS 7 can use the airplay fine without any issues.
    So since the new update my phone can use the speakers but my Macbook Pro can't? Help!

  • EX60 - Lost connection with control device

    After upgrading my EX60 from 6.3.1 to 7.1.1 I now receive "Lost connection with control device" and the touch control panel sits in a spinning loop.
    I also reveive the following within the web management interface on the EX60:
    ERROR: Touch panel connection
    No touch panel detected when indicators forced
    If I downgrade back to 6.3.1 it works again. I have already rebooted and factory reset the entire unit and also disconnected and reconnected the touch panel.

    I'm having the same error message on an SX80 with no touch panel
    We use a Crestron controller so we will never connect a Cisco touch panel...  we just want the error message to go away in the diagnostics/troubleshooting web page.
    ERROR: Touch panel connectionNo touch panel detected when indicators forced

  • SGE2010: stack member reboots with 'Lost connection with unit x reason 0x20097'

    Hi All,
    Over the last 2 months we've had repeated issues with SGE2010 units in a stacking configuration rebooting randomly.
    Prior to a member reboot occuring we see the following logging message via SNMP Trap on on the unit's internal logging via the GUI:
    'Lost connection with unit x reason 0x20097'
    We've made attempts at consulting Linksys/Cisco support regarding this 'feature' but aren't really getting anywhere with 1st level support who don't seem to understand much about supporting the device.
    The layout is thus:
    * 3 x SGE2010 units all of the same firmware version (3.0.1.0)
    * Stack configured in a ring topology
    * Cat6 cabling used on the stacking ports
    * 7 VLAN's
    * Mixture of trunking + VLAN tagging & standard ports configured
    We've tried the following:
    * Swapping out the member that reboots with another, but we get the same behaviour even with a new unit after about three weeks of running
    * Changing the cabling between the members, same behaviour
    * Upgrading the firmware from a previous version to the current 3.0.1.0
    I'm not really keen on factory resetting the whole show & reconfiguring 144 ports by hand (the downtime will cost my users dearly, not to mention carpal tunnel from overuse of the web GUI)
    Is anyone able to clarify what a reason code of 0x20097 is?
    At least understanding what the error is may allow us to better understand the condition in which the switch decides it must reboot.

    Hi Lee,
    The small Business support center (SBSC) is the place to get this problem resolved.  If the technician needs to get the error code looked at by a Product Engineer, then they have to escalate your call into the bowels of Cisco development.
    Please call into  the SBSC again,  and try to reopen or open a new case.  This call has to be resolved or escalated.
    You have the ability to say to the technician ,
    1.  "I want this call escalated"  or
    2.  " I want to speak to the Manager On Duty to esclatate the call"
    If you have any issues, please  let me know.
    My email address is   dhornste  at  cisco.com    (remove the spaces and replace at with @)
    here is a link to get hopefully a local number to call into the SBSC.
    http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
    regards Dave

  • Evolution: lost connection to Evolution Exchange backend process

    I use Evolution to fetch my email from the company exchange servers, which worked fine until tuesday. I updated a few packages (most notably was a new version of jre) and when I started Evolution, I got the error
    Error while Refreshing folder. Lost connection to Evolution Exchange backend process
    I've been troubleshooting this problem, but no luck so far. Even Installing my previous version of jre did not work (I upgraded from 6u3-2 to 6u5-1 on tuesday).
    Does anyone know how to either solve this problem or how I could troubleshoot my way towards a possible solution?

    Yes, here is one that will probably yeild results for you:
    Take this to the Solaris forums, this has nothing to do with Java.

  • Z10 lost connection to mobile network

    My Z10 worked fine for the past 2 years.  Yesterday it received messages until 8:08 am, then lost connection to the network.  It is a Verizon phone with Verizon SIM and Verizon support told me to go to a store to get a new SIM.  That did not resolve the problem.  The icon in the upper right now says "SIM activation in progress"...as it has for the past 12 hours.  Clearly nothing is happening.  When I check Settings, About, SIM, the Z10 reads the SIM but the SIM is not registering with the network.
    One guy at the Verizon store had never used a Blackberry and was on Google looking for answers.  He suggested it was becuse I went through airport security.  Another said the phone had failed and he wanted to sell me an iPhone.  I don't want an iPhone and I don't want to lose my unlimited data plan at Verizon (which terminates if I upgrade through Verizon).
    I am not convinced it is a hardware problem but I don't have any way to test it and the Verizon guys are just guessing...and trying to sell me an iPhone.
    I have not upgraded any SW or changed any settings recently. The phone has not been dropped or anywhere near water...it looks brand new.  It just stopped working mid-morning. 
    How do I get my Z10 working again?
    Thanks

    Hello,
    Given what you describe, you must also have rebooted the device...since the inserted battery blocks the ability to remove/insert the SIM card. So, that basic guidance has already been carried out.
    Have you checked the Mobile Network Settings, just in case something was changed accidentally somehow?
    Otherwise, what you need to do is escalate beyond those at VZW you are presently talking to...clearly they are not the experts you require. You likely will need to call them (from a landline, so you can do things they recommend) and escalate beyond their Level 1 support folks and get to someone who actually knows the platform and can also check deeper into the VZW network itself.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for