Upgrade to Service Pack 2

Can I just use the M/soft upgrade to Vista Service Pack 2 link on the Microsoft site and not affect any of the HP software on my TouchSmart pc?

ruhtra2 wrote:
how do i upgrade to service pack 2?
Windows Update, or you can manually download Vista SP2 and install it yourself.
The same would apply to Windows 7 SP1

Similar Messages

Upgrade of Service Pack

Hi all,
We need to Upgrade the Service Pack of SAP BW.
What is the process to do that?
OR Pre or Post steps that we need to follow.
Please help.

You have to do following testing,
Activity
ExtractionCreation of Infopackage
Execution of infopackage with filters(Dynamic and static) and without filters.
Deletion of infopackage.
Modify an existing infopackage
Data Extraction from LO data sources(Full, Delta, Repair Full, Init,repeat delta)
Data Extraction from Generic data sources(Full and delta)
Modelling
Creation of DTP
Execution of DTPwith filters(Dynamic and static) and without filters.
Deletion of DTP.
Modify an existing DTP.
Check for functioning of interactive DTP Code.
Functionalities of Semantic groups and various Update modes in DTP settings.
Creating of Error DTPs.
Delta Intialization in DTP
Check for functionality of start, end, and transformation routine.
Aggregation behaviour with and without start routine.
Update behaviour od end routine.
Over write and Additive functionality of transformation.
Delta functionality in DSO and change log entry creation.
Check Delta Consistency from Write Optimized DSO
DSO data load and activation of DSO data. (Both 3.5 flow and 7.0 flow)
Data mart loads (execution of DTP in 7.0 flow and u201Cfurther updateu201D for 3.5 flow).
Deletion data from DSO and Cube ( Selective, request based and full)
Delete and create index.
Cube Compression
Rollup of Aggregates
Request deletion in ODS/Cube
Process Chains
Run process chains for Master(with attribute change run)
Run process chain for transaction loads which has a full flow i.e source sytem extraction to Aggregate roll up.
Check for Metachain execution
Remotely calling a process chain from a source system
Event based trigger of process chains
Deletion of PSA and Changelog using process chains
Deltion of contents using process chain
Execution of ABAP pgms using process chains
Functioning of decision making and interrupts in process chains.
Front End
Execution of report on Bex, Portal, RSRT
Customer exit variable
Virtual Characteristics/Key figures.
Text variables with replacement path.
Check for Formula variables.
Run time Unit and/or Currency conversions.
Hierarchy variables or Hierarchy.
Query execution using RRMX (IN BEX)
Creation of a work Book and refresh the work book.
All existing functionalities of work like copy sheet,Global and local variables
Excel version of queries.
Broadcasting a workbook and query
IP
Create, Change , activate an Aggregation Level,Filter, Planning sequence,Planning Function
Test the functionality of Planning Functions
Test the reason entry Functionality
Check the scroll in IP Screen.
Others
Creation and Execution of APD
Creation and execution of Open Hub
Data Archiving in Write Optimized DSO and Standard DSO
Run Native SQL Pgms
Run SE38 pgms
Refresh Xcelsius dashboard and check for functionality.
Regards,
Sushant

Documentation on BPC V7 benefits for upgrading from service pack 3 to SP7

I am looking for information on Service Pack releases & benefits. Weu2019re currently on V7 SP3 (SQ2005) and want to understand the benefits between SP3 and the subsequent releases up to SP7. Can someone point me as to where I can find literature on this matter? Thxs all

Hi Eduardo,
As I know last SP for BPC 7 (MS version) is SP 6, you can find solved issues, installation/upgrade instructions and related OSS notes on OSS note 1388412.
Hope this helps,
Regards,
Carlos.

How to upgrade the service packs

Hi experts,
I have one doubt about upgration of the service packs.How to upgrate one sevice pack to another one . Is there any process to this.
please let me know the things.
Regards
babu

hi
You need to first download the service packs for the particular product from the service market place. Service packs offer solution to the bugs in the product which was released earlier. So each version may have inturn have many service packs released.
First of all before upgrade you need to know which version and service pack you are right now. Then accordingly you can download the desired files by giving the target SP and current SP. There are suitable upgradation documents available in market place reading upon which you can install Portal or WAS.
Regards,
Ganesh N

Issue while attempting to upgrade 07 service pack 3

While attempting to upgrade our Windows server 2008 server from Exchange SP1 to Sp3...we receive the following error message
"Error: The well-known object entry
B:32:0203007315595CE4DA33091DD24F58231:CN=Exchange Public Folder Administrators\0ADEL:bdabb1b4-dbb1f-4b0c-bd59:02e9b190b03,CN=Deleted Objects, DC=xxx,DC=xxx of the otherWellKnownObjects attribute on container object CN=Configuration,DC=xxx,DC=xxx points
to an invalid DN or a deleted object. Please remove the entry and rerun the task."
This error occurs during the Organizational prep stage of Service pack 3 installation within 15 seconds. I've attempted to ADSIEDIT the entry but am having trouble finding the referenced item.

Ok...now i'm really in a bit of a mess. I haven't been able to restore the server services, including w2008 services etc.., since the removal using the ADSI edit commands and it is pointing to a permissions issue. I'm getting the following
in my Event Logs.
Microsoft Exchange System Attendant failed to read the membership of the universal security group '/dc=Local/dc=CEC/ou=Microsoft Exchange Security Groups/cn=Exchange Servers'; the error code was '80072030'. The problem might be that the Microsoft Exchange
System Attendant does not have permission to read the membership of the group.
If this computer is not a member of the group '/dc=Local/dc=CEC/ou=Microsoft Exchange Security Groups/cn=Exchange Servers', you should manually stop all Microsoft Exchange services, run the task 'add-ExchangeServerGroupMember,' and then restart all Microsoft
Exchange services.
"Microsoft Exchange System Attendant does not have sufficient rights to read Exchange configuration objects in Active Directory. Wait for replication to complete and then check to make sure that the computer account is a member of the "Exchange Servers"
and "Exchange Install Domain Servers" security groups."
as well as...
The Microsoft Exchange Replication Service attempted to start the RPC server but failed because an error occurred when attempting to read the Exchange Servers Universal Security Group SID from the Active Directory. Error message:
Failed to find Exchange Servers group in Active Directory."
These messages basically occured shortly after the ADSIedit commands were issued. I've since attempted minimal security permissions lookups with no success. Any thoughts guys? I would really like to avoid a restoral of my Exchange environment
which consists of 3 Domain Controllers and a single Exchange Server running 2008 std w/Exchange 07 sp1.

Upgrading of service packs

How would I upgrade the nw04 sp2 to higher versions?

Hi
You can also have a look at the relevant upgrade guide at http://service.sap.com/instguides -> SAP NetWeaver -> Release 04 -> Upgrade ->
1. Log on to the SAP Service Marketplace website --- Http://service.sap.com
2. Software Download>Support Packages and Patches>SAP Support Package stacks
3. Select the appropriate system (Example: mySAP ERP 2005)
4. New window lists all the components in the selected system.
5. Uncheck the Restrict according to Usage
6. Select the components for which you want to apply support packs and click next Step button.
You will get the required SAR files.Uncar those files you will get two folders jee-cd and sapinst,run the sapinst and import java patch.
any issues ...............let me know

I am trying to upgrade Windows service pack 2 to itunes 11.1.3, so I can access outlook and backup my outlook calendar to recently purchased 5S. Unfortunately at the end I get message " could not access network lo

The WindowsXP service pack2 is my operating system on the destop.

Many thanks.
The exact message was " could not access network location itunes\".
Although you're getting a different error message, try the following user tip with that one:
"not a valid short file name" and "invalid character" install errors

Upgrading Service Pack in SAP BI 7.0

Hi All,
We are using BI 7.0. and need to upgrade the Service pack from SP 14 to SP 16.
Can anyone please let me know
1. The Impact on the system we would be facing with this upgrade.
2. The things that need to be taken care - pre or post upgradation. Any check list or Test
Plan to take care after the upgrade.
Thanks in advance.
-Maddy

Hi,
On uograding the service pack, unit testing needs to be perfromed for all the objects.
For e.g.
1. Perform the loads for all the infoproviders as well as master data.
2. Execute all queries, web templates etc....
3. Check all workbooks.
4. check if roll up and change run are executing fine.
Hope this helps!!!
Regards,
Nitin

MS SQL Server 2000 Service Pack 4 upgrade

Hi,
I need to upgrade my actual SAP DataBase SQL Server 2000 from Service Pack 2 to Service Pack 4 in order to be more secure as a MS consultant is requesting, but following the comments on the SAP note 1026116 attached file, which references this MS article:
http://download.microsoft.com/download/1/B/D/1BDF5B78-584E-4DE0-B36F-C44E06B0D2A3/ReadmeSql2k32sp4.htm
Referenced Text:
"If your instance of SQL Server 2000 is being used by an application, first check with the provider of the application whether there are any SQL Server 2000 upgrade considerations specific to that application. "
So following this instructions is there any SQL Server 2000 upgrade to Service Pack 4 considerations for a SAP Database of an ERP R3 ECC 6.0.
Could anyone can help me please with this question?
Best Regards,
Erik Espinosa

Hi,
Service Pack 4 is supported and recommended for SAP ERP ECC 6.0. There are currently no known issues with upgrading to this service pack. The mentioned collation change don't have to be performed as long as you are not planning to upgrade to SQL Server 2005.
Best regards
Clas

Can't install Service Pack 2

I installed XP on to my MacBook Pro. I tried installing the Mac components on to XP but I got a message saying that I need to upgrade to Service Pack 2. I downloaded the Pack and started to install it but now I am getting a message that I do not have enough room. I have 7GB of room in my Windows partition! Is that not enough to install? How big should I make my Windows partition?

Thanks xnav! I did a search but I did not find an answer. I read the link to Slipstreaming...why is everything for Windows so complicated?!?!? LOL! Thanks again!

Upgradation of SUPPORT PACK in BI 7.0

Hi All,
We are using BI 7.0. and need to upgrade the Service pack from SP 14 to SP 16.
Can anyone please let me know
1. The Impact on the system we would be facing with this upgrade.
2. The things that need to be taken care - pre or post upgradation. Any check list or Test
Plan to take care after the upgrade.
Thanks in advance.
-- Maddy

Hi Kavitha,
Check these links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
Bi7 upgradation.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
http://wiki.ittoolbox.com/index.php/Upgrade_BW_to_Netweaver_2004s_from_v3.0B
Up grade 3.5 to BI 7.0
Upgrading BW 3.X to SAP NetWeaver 2004s BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
/people/prakash.darji/blog
/people/prakash.darji/blog/2006/09/22/rolling-out-the-new-sap-netweaver-2004s-bi-frontend-tools
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
/people/prakash.darji/blog
https://forums.sdn.sap.com/click.jspa?searchID=5046269&messageID=3148221
https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000586052&
https://forums.sdn.sap.com/click.jspa?searchID=5046269&messageID=3980419
3.x to 7.0 Upgrade
https://websmp208.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000586052&
https://wiki.sdn.sap.com/wiki/x/JYk
Hope this helps...................
Thanks=Points in SDN
Rgs,
I.R.K

EAS 9.3.1.4 service pack does not contain eas.ear

Hello Experts,
One of my customer has the following issue:
Currently at version 9.3.1.0.0.135 of EAS and version 9.3.1.0.0 for Essbase. They have downloaded the EAS 9.3.1.4 Service Pack and extracted the zip file and setup.jar file but the package does not seem to contain the new eas.ear file for deployment. Initially when setting up 9.3.1 environment, they manually deployed all of the ear files to Weblogic 9 application servers as per the 9.3.1 install guide.
The EAS 9.3.1.4 service pack readme file instructions only reference the original 9.3.1 installation guide, but since the manual deployment instructions in the original 9.3.1 install guide for original install is opted, they are now stuck with having to manually deploy upgrades and service packs manually as well.
Do you know how we can obtain the 9.3.1.4 eas.ear file and any other associated EAS upgrade files so that they can manually deploy to WebLogic and perform the upgrade?
Environment:
EAS on Solaris 32 bit servers
Any suggestions would be of greatest help.
Regards,
Sonal

Hi Sonal,
One option could be that you re-deploy AAS on Weblogic with the auto deploy instead of manual and then upgrade to AAS 9.3.1.4.This may not be the best option but something that can be done.
Cheers
Manoj

XP Service Pack 3 cripples live drive

% Once I upgrade to service pack 3 my li've dri've no longer works.
I have tried reinstalling the creative drivers, but Windows seems to re-install broken drivers.
After upgrading to service pack 3 none of my li've dri've inputs (mic/line2) show up in the windows or creative mixer.
Please help!

)Re: XP Service Pack 3 cripples li've dri've? Dear fellow user:
I may be reaching a bit but I would like you to try something that is very simple. Go to your Creative software and verify in each program that your I/O dri've cannot be seen. Then shutdown the machine. UNPLUG THE i/o dri've with power and the ribbon cable. Restart the machine. Verify again that you have or do not have access to any of the features. (I know this sounds silly)? Then shutdown the machine and reconnect everything. This is similar to removing a device and letting windows redetect it. I have a very old (*998*) Creative Li've Dri've (precursor to the I/O dri'ves) that was not recognized in Windows XP nor Vista. Then I shutdown and replugged everything and rebooted and it was there again. This may sound funny I know, but it almost sounds like Windows just has not picked up the Li've Dri've on this pass. It COULD BE? a service pack 3 issue, but again please give my answer a try. If that does not work, reinstall your driver suite once on top of the Service pack 3 system again. Service packs are massi've updates to your system and it takes a bit to get everything refreshed.
Cheers
jmacguire

SLD on different service pack

Hi,
Our XI system is being upgraded to SP16 in a short while. Now, we have a DEV system, a Quality Assurance system, and a Production system. Our SLD is installed on the DEV system and functions as a central SLD, so QA and PRD use the same SLD.
My question is: Is it possible to have the SLD on a different service pack than Production? We want to implement SP16 on DEV first (which includes the SLD) and then QA and finally Prod, but there is going to be a gap of one to two weeks. Will the production system (which is on SP12) still function correctly, or do we have to upgrade the service pack on all systems at once?
Thanks in advance!
Yordy

Hi Yordy,
Theoretically, the SLD can have a different SP (as long as it is equal or highr, it is okay). What needs to be the same is the CIM model version.
Cheers
Manish

WLPI: business operations JNDI lookup & service pack

Hello,
I ran into a problem attempting to define a business operation in the Studio application
using WLPI 1.2.1 (without service pack 1). Everything works up to the point where
I press the Done button and Studio attempts to create a new business operation
object. I am getting a JNDI lookup exception. It appearsejb-name of method in
isolation-level must be the same name as that of the weblogic-enterprise-bean
Studio is looking up the name 'com.bea.wlpi.businessoperation' while the business
operation bean is bound under 'com.bea.wlpi.BusinessOperation'.
In an attempt to fix this problem I upgraded to service pack 1, but am now unable
to deploy wlpi-ejb.jar because of the following error: "ejb-name of method in
isolation-level must be the same name as that of the weblogic-enterprise-bean".
Can anyone help me create a business operation?
Thanks,
Martin

Make sure that this Datasource you created is Targetted to Admin Server and full Cluster (incase of cluster domain). From Admin Console, select your datasource and check for the Targets tab. Since its JNDI lookup error, most probably it may not be deployed properly.
HTH
Ravi Jegga

Upgrade to Service Pack 2

Similar Messages

Maybe you are looking for