Upgrade to Solaris 10 from Solaris 8

My client has upgraded from Solaris 8 to Solaris 10. In the process the
partition /lu (live update) was created at about 8GB. The root partition is currently at 94% and removal of /lu has not recovered this space. Please
advise best practice to resolve this problem.
regards,
OraclWzd.

Thanks for the reply. I guess I did not make it clear. The /lu (live update) directory needs to be removed in its entirety. It sits under the root partition and is the result of the upgrade from Solaris 8 to 10. We backed-up the directory to tape (over 8GBs) and removed all the files and sub-directories under /lu. The utilization under the root partition remains at 94%. Why would the over 8GBs removed not be returned the available space under the root partition?
thanks,
OraclWzd

Similar Messages

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Solaris 9 live upgrade to solaris 10 segmentation fault

pre-upgrade work:
apply patch doc 72099
upgrade live upgrade to solaris 10.
lucreate-m /:/dev/dsk/c0t1d0s0:ufs -m /var:/dev/dsk/c0t1d0s1:ufs -m /opt:/dev/dsk/c0t1d0s3:ufs -n sol10
it works well
oot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol9 yes yes yes no -
sol10 yes no no yes -
But luupgrade -u -n sol10 -s /sol11
Validating the contents of the media </sol11>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <11>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <sol10>.
Determining packages to install or upgrade for BE <sol10>.
Performing the operating system upgrade of the BE <sol10>.
CAUTION: Interrupting this process may leave the boot environment unstable
or unbootable.
/usr/sbin/luupgrade[677]: 6549 Segmentation Fault(coredump)
ERROR: Installation of the packages from this media of the media failed; pfinstall returned these diagnostics:
The Solaris upgrade of the boot environment <sol10> failed.

I would break your mirror and do a liveupgrade on the available mirror. Then boot that disk.

Solaris 9 404 Upgrade to Solaris 10 on Ultra 10

I tried to do a Solaris 9 404 Upgrade to Solaris 10 on my Ultra 10 with SVM mirrored system drives and it wouldn't get past the Upgrade Profile Initialisation section. It stayed there for a long time, maybe 20 minutes and finally came up with a Failed screen. It compalined about a missing device name, said it couldn't find root or boot and mentioned something about filesystem backups.
Is an upgrade from tis configuration really supported?
Ultra 10 440MHZ 768MB RAM. Dual 73GB SCSI mirrored with SVM system drives. One 120GB IDE media drive. There is only a main and a swap partition on the system drive ie everything is in /.
Am currently backing up the data I want from the system drives prior to attempting an initial install but I'd obviously prefer to upgrade the system and keep the SVM filesystems as they are.
Nick ([email protected])

I would break your mirror and do a liveupgrade on the available mirror. Then boot that disk.

After upgrading to Solaris 10 "Can't load the root filesystem" on V245

I have a Sunfire V245 that was running on Solaris 9 (very stable). I upgraded to Solaris 10 (6/06) this morning and everything seemed to go smoothly. After the upgrade the system rebooted, but will not boot. I get the following uptput;
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.10 Version Generic_118833-17 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
pxb_bcm: cannot load driver
Cannot load drivers for /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@0,0:a
Can't load the root filesystem
Type 'go' to resume
"go" attempts to reboot, but I end up back in the same place.
Please help.
Thanks in advanced,
Craig

It seems like the driver for that device does not exist. Since the system installed successfully it means that it S10 did find a disk. I wonder if that was a different disk than the default disk. Please boot to the miniroot and check the disk info.

Upgrade to Solaris 8 - Solstice Backup

Hi,
I currently have Solstice Backup v5.0.1, patched with 105658-05 on Solaris 2.6. When I upgrade to Solaris 8 can I reinstall Solstice Backup v5.0.1 or will I have to upgrade it too?
Thanks
D

Minimum release of Solstice Backup for Solaris 8 is 5.5.1. Latest is 6.1.

Solaris 8 x86 system refuses to upgrade to Solaris 9

My x86 system successfully runs Solaris 8 (Feb. 2000 revision A) but refuses to upgrade to Solaris 9. When trying to boot one of the installation cds in anyone of the installation modes, the boot process proceeds till the message "booting kernel/unix, ... use is subject to license terms". Next I would expect setup messages for the network interface, but instead I get a blank screen with a cursor blinking top left, and that's the end of it.
Well, to be true, it's not really a problem of Solaris 9. The same thing happened when I tried to install a patch set on Solaris 8.
What ways of diagnosis do I have?
Is anything in Solaris 8 not upward compatible?
Thanks in advance for every hint!
Bernd.

OK after the DCA scans, it goes to a screen labeled "Boot Solaris" which indicates the boot drive. On that screen f4 is labeled Boot Tasks. Press f4 and go thru the settings to select the boot device and any of the other settings you might want to change. then f3 back to the boot screen and f2 continue. When the boot options screen appears, type in b -r. The DCA should not start up each time after that. To be honest, I had to do this a couple of times before something unknown to me made it finally work. Go figure!
Lee

Upgrade to Solaris 9

Hello Experts,
I have a Sun Enterprise 420R system with Solaris 8 OS installed.I want to know wheather we can upgrade the Solaris 8 to Solaris 9 for the above mentioned Hardware.
Is there any issues faced while upgrading the OS on the particular hardware.
Thanks in advance.
Best Regards,
Sunil.

Shouldn't be any problems as far as i can see.
//Magnus

Upgrade to Solaris 10/08 hangs after reboot

I upgraded to Solaris 10 10/08 however the system hangs after reboot.
I had never any issues with its previous versions. Any thoughts?

To be sure I upgraded to the latest BIOS.
Both kernel debugger and single user mode do not work.
This seems like a serious issue in my opinion.

Swap space - upgrading to solaris 8

Hi
I have Solaris 2.6, 3Gb RAM and
# swap -l
swapfile dev swaplo blocks free
/dev/dsk/c0t0d0s4 32,4 16 527024 378752.
# vmstat
procs memory page disk faults cpu
r b w swap free re mf pi po fr de sr f0 m1 m1 m1 in sy cs us sy id
0 0 0 22392 13240 10 379 282 191 219 0 5 0 0 0 8 1381 5898 4631 6 5 89
# sar -r 1
SunOS nwlabs 5.6 Generic_105181-26 sun4u 02/26/02
16:26:54 freemem freeswap
16:26:55 5964 4947043
The Solaris 8 Advanced Installation Guide recommends allocating at least 512Mbytes of swap space before upgrading. Is this referring to swap disk or total swap space?
Do I need to allocate more swap space before upgrading to Solaris 8?
Thanks
D

If you are using the "Installation" cd with Solaris 8 then it requires a minimum of 512 to store the "installer" in swap so it can do the installation. If you forego the use of the Installer CD and start the Installation with Disk 1 of 2 then you don't have to worry about swap issues. The Advanced Installation Guide seems to indicate that you should use the WebStart Installer but it is not needed.
If you are doing an upgrade then it will use what you already have set up as a swap slice. If you are doing an initial install then you can make swap whatever you want.

I recently upgraded to Windows 7 from Vista but my iTunes will no longer work. It says file can not be located when I try to play a song.

I recently upgraded my operating system from Vista to Windows 7. Ibacked up all of my music on an external hard drive before I reformatted my computer. I have reloaded iTunes several times and attempted to transer my files back to my computer. Everything appears to transfer but once I remove the external hard drive I get a message stated file cannot be located. What am I doing wrong?

I just posted a similar question -- five months later. Did you ever find a solution?

Is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

best answer to your question I've ever seen is;
Kappy Tampa, FL and Vancouver, BC
Re: Downgrading Oct 16, 2012 2:57 PM (in response to nbabbit2013)
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

I had to erase my data to upgrade my iPhone software from an older version. I backed up first, but seem to have lost all my notes. Does anyone know how retrieve my old notes?

I had to erase my data to upgrade my iPhone software from an older version. I backed up first, but seem to have lost all my notes. Does anyone know how retrieve my old notes?

Is this the note you are referring to:
Not sure if this can help you.
I checked my notes. They are stored here:
MacintosHD/Users/MYHOME/Library/Containers/com.apple.notes/Data/Library/CoreData /ExternalRecords/
xxxxxserie.of.numbers.probably.yours.are.different/IMAPNote/_records/0/
If I go tot this window on finder and enter Time Machine I can go back and find old notes...
If so, am I doing this on my new hard drive on on the time machine? When I do this on the time machine, what is "my home"? Also, I am unable to find "containers".
If I go to users/jeff/library, then I see components, compositions, contextual, etc, but not containers.
Thanks

How to upgrade the fwsm image from 3.1(10) to 4.0(8).

Hi all,
I need to upgrade the fwsm image from 3.1(10) to 4.0(8). Can i do it directly from 3.1(10) to 4.0(8) ?
Do i need to upgrade other image also along with Firewall version 4.0(8)?
FWSM# sh ver
FWSM Firewall Version 3.1(10)
Device Manager Version 6.1(5)F
Compiled on Mon 21-Apr-08 17:43 by fwsmbld
FWSM up 2 days 15 hours
failover cluster up 2 days 15 hours
Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash STI Flash 8.0.0 @ 0xc321, 20MB
0: Int: Not licensed : irq 5
1: Int: Not licensed : irq 7
2: Int: Not licensed : irq 11
The Running Activation Key is not set, using default settings:
Licensed features for this platform:
Maximum Interfaces : 256
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : Unlimited
Serial Number: SAD125004FT
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration last modified by enable_15 at 18:58:52.627 IST Mon Jan
11
2010
Regards
Madhu

Application partitiion is what you will be upgrading from 3.1.(10 to 4.0(8).
MP - maintenance partition is supposed to be 2.1.2 or above which is the same requirement for 3.1.x so, you will be good there.
Pls. check the compatibility with the swtich code in this 4.0.8 Release Note link:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Pls. check the chassis system requirement in the above link.
commands you will need are:
copy tftp flash:image
copy tftp flash:asdm
falsh:image for OS and flash:asdm if you will be upgrading the asdm as well.
-KS

After upgrading to Mountain Lion from Lion, Mail, Safari and note need about five minutes to start.

After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".

Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!!

How to upgrade my macbook pro from 10.6.8?

i wish to upgrade my macbook pro from 10.6.8 what is the best way?

If you wish to upgrade from 10.6.8 (Snow Leopard) to 10.8.x (Mountain Lion), first make sure that your model meets the minimum hardware requirements (http://support.apple.com/kb/sp654) and then download ML by purchasing it from the Mac App Store.
Clinton

Upgrade to Solaris 10 from Solaris 8

Similar Messages

Maybe you are looking for