Upgrade to SQL 2014

I am considering upgrading the sql server 2008 R2  we have as the db server for SCCM, reporting and WSUS to sql server 2014
am aware you need to keep the same sql architecture and edition
I read that you cannot upgrade a db when the compatibility level is not set to 100
this is the case on the SUSDB when installed on a server 2008 R2 os
? will raising the compatibility level of the susdb be without an impact on sccm
? is the wsus 3SP2 supported to run on sql server 2014

Hi,
>>? is the wsus 3SP2 supported to run on sql server 2014
According to the official document of WSUS 3.0 SP2, SQL server 2014 is not listed in the database requirement.
For detailed information, please refer to the link below:
https://technet.microsoft.com/en-us/library/dd939928%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396#WSUSdb
Beside, according to the blog below, there is known limitation about the combination of the WSUS 3.2 and SQL server 2014:
http://blogs.technet.com/b/configmgrteam/archive/2014/04/29/support-announcements-for-april-2014.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Issue while Upgrading to SQL 2014 from 2012. " The specified Edition upgrade is not supported."

    Hello Team
    I am seeing this issue while I am trying to do an in-place upgrade from SQL Server 2012 to SQL 2014. Both being Enterprise Editions I am still seeing the below error message in the Feature Upgrade checks.
    " The specified Edition upgrade is not supported"
    Please let me know if anyone else has faced this issue and any workarounds? I am not doing "Edition Upgrade", just wanted to upgrade same edition of 2012 to 2014.
    SQL Server details that is being upgrade: 
    Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) 
    May 22 2013 17:10:44 
    Copyright (c) Microsoft Corporation
    Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    thanks

    Hi Shanky_621
    Thanks for the reply. Yes I was told that it is SQL 2014 Enterprise Edition. Is there a way to verify that? Also yes I did not select the free Evaluation or Express Editions.
    Just run the setup you got for SQL server 2014 and you would reach to page where it would say enterprise or standard after that cancel the setup . Actually version number can be found from Mediainfo located in same folder where setup.exe is located but edition
    cannot be found by that way.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

  • SQL 2012 AlwaysOn upgrade to SQL 2014

    Anyone have some info regarding inplace upgrade from SQL 2012 AlwaysOn to SQL 2014 ?
    -Arnstein

    Hi,
    Please check the following articles:
    Upgrade and Update of Availability Group Servers with Minimal Downtime and Data Loss
    https://msdn.microsoft.com/en-us/library/dn178483.aspx
    Thanks.

  • SCOM Management Servers not working after DW upgraded to SQL 2014

    Hey guys,
    Our setup is that we have 2 Management Servers running SCOM 2012 R2 UR3 on Server 2008. I want to say exactly what our problem is, and what my guesses are at it. Any additional information you need please just ask. 
    Problem = In the SCOM console we have the management servers and Gateway servers going grey. If i go to these servers and restart the Monitoring service, it acts like it was locked up or something and has to force stop it and restart it. Once back up, everything
    works fine. Then it goes grey again at a random interval between 5-120 minutes. Recycle Repeat. I reviewed the Event Log during this and afterwards and ALOT of stuff points toward the DataWarehouse and not being able to write stuff to it. I have two suspicions. 
    Idea 1 = Another Engineer recently updated SQL on the Datawarehouse server to 2014. I recently found this had caused a problem with SCSM reporting and had to do some stuff to fix that.... so I was thinking that maybe this had something to do with it. 
    Idea 2 = Also around the same time... UR3 came out. This was auto pushed out to all the server and agents through WSUS, I also went through and manually did all the steps for this. Its still possible i suppose that I missed something. 
    Basically Im just looking to see if anyone has any advice as to what to check next, and/or see if anyone else has had this problem. Thanks guys!

    I unfortunately do not have a solution for you, but can still try to provide some info :
    1. SQL 2014 is NOT supported with system center 2012 R2! See http://technet.microsoft.com/library/dn281933.aspx
    2. You might want to try the procedure for moving the databases : http://technet.microsoft.com/en-us/library/hh278848.aspx

  • Error in converting SQL 2014 Trial to Full version using VLKey

    Hi,
    I am currently trying to upgrade my SQL 2014 evaluation version to the full version.
    I have purchased a Volume License for SQL Server 2014 Server/CAL and have extracted the product key from the ISO File.
    I have verified this product key with the product activation department and it is confirmed that it is a valid product key "ProdKey3 SQL Svr Standard Edtn 2014 00204 PA/BP VL:GVLK Pre Pidded"
    However, when i input the product key in to the server, it is showing me the error message:
    The SQL product key is not valid, enter key from certificate of authenticity or SQL server packaging
    Checked on the version of the evaluation and this is the edition - Microsoft SQL Server 2014.0120.2000.08
    The site that I am activating the server on does not have any internet connection, does this affect the activation?
    Would there be an alternate phone activation method for converting to Trial to Full?
    Kindly Assist. Thank you.

    Hi Julian,
    Firstly, according to the error message, please ensure that your SQL Server installation file is not corrupt, and make sure you use corresponding license key matched the edition and version of SQL Server. For more details about the error, please review the
    similar
    thread.
    Secondly, in addition to Ed’s post, you can also use the following command lines to upgrade SQL Server 2014 Trial to a full version.
    Setup.exe /q /ACTION=editionupgrade /INSTANCENAME=<MSSQLSERVER or instancename> /PID=<PID key for new edition>" /IACCEPTSQLSERVERLICENSETERMS
    Thirdly, for more detailed information regarding to the license issue, please call
    1-800-426-9400,
    Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide to Worldwide Microsoft Licensing Sites to find contact information in your locations.
    Thanks,
    Lydia Zhang

  • Moving SCCM 2012 R2 SQL 2014 Database to New Server

    Greetings,
    I have a SCCM 2012 R2 server with SQL 2014 installed which has been upgraded from SQL 2008 R2.  My goal is to separate the SCCM and SQL servers.  I am aware that SCCM only supports SQL 2014 if it has been upgraded on new installs, but after installing
    SQL 2014 on a new server and importing the database I get an error from the Configuration Manager Setup stating that I must upgrade the SQL server before I can modify the SQL Server configuration.  
    Does this mean I need to install SQL 2008 or 2012 on the new DB server and from there upgrade to SQL 2014?

    Thank you for your reply.  We have been having several issues with our current server, and have had performance issues with SQL and SCCM installed on the same server mainly during OSD deployments to several machines at the same time.  These servers
    wouldn't necessarily need to be separated since we can allocate more resources, but the overall goal is to move our primary site server to a new server running Server 2012 R2 (current server is 2008 R2).
    I have tried the site recovery option in the installer where you run the SCCM backup and restore maintenance task and I have renamed the new server to the name of the old server.  If I understand correctly, this is the correct method of switching out
    a site server machine?  I experience the same error as my original post when trying this, but I will try the hotfix Torsten provided as this seems to be the issue I'm having.
    Thank you.

  • How to protect (take backups) SQL 2014 AAG databases from DPM 2012 R2 with RU2

    We have just upgraded / replaced our SQL Server plattform in the following way:
    SQL Servers:
    3 Servers running Windows 2008 R2 + SQL Server 2012 CU9
    Upgraded to SQL 2014 so the system databases were up to the latest level
    Removed all AlwaysOn AAG, destroyed cluster etc
    Then total reinstall of all servers with Windows 2012 R2 + fresh install of SQL 2014
    Replaced the fresh system databases with the old upgraded databases
    Upgraded SQL 2014 With CU2
    Re-setup a New cluster and AlwaysOn. All SQL Servers are running fine
    DPM 2012 R2 With RU2:
    Removed all previous backups of both AAG, Bare Metal etc related to the old servers.
    Uninstall the DPM agents 
    Reinstalled agents after the 3 new serves where ready
    Added Bare Metal backup. Works fine.
    Added SQL Server backup of databases not part of any AAGs. Works fine.
    Then comes the problem: I try to add protection of the new AAG's in DPM. I can see the new cluster and the AAG's, but when I try expand each Group, nothing shows up. It takes around 20 sec or so after I try to expand.
    Any clue about what can be wrong?
    Per

    Part 2
    115C 1B84 07/14 02:06:50.519 61 neapplicationnamespace.cpp(500) [000000000126FA30]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [000000000126FA30]  NORMAL <--CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [0000000001275B40]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(1110) [0000000001275B40]  NORMAL Failed to get size of [%SystemRoot%\Vss\Writers\*.xml]
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(1059) [0000000001275B40]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(991) [0000000001275B40]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [0000000001275B40]  NORMAL <--CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.520 61 neapplicationnamespace.cpp(500) [00000000034BD250]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250]  NORMAL Failed to get size of [%SystemRoot%\System32\Prfc????.dat]
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250]  NORMAL Failed to get size of [%SystemRoot%\System32\Prfd????.dat]
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250]  NORMAL Failed to get size of [%SystemRoot%\System32\Prfh????.dat]
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1110) [00000000034BD250]  NORMAL Failed to get size of [%SystemRoot%\System32\Prfi????.dat]
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(1059) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : hr
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(991) [00000000034BD250]  WARNING Failed: Hr: = [0x80070002] : Encountered Failure: : lVal : GetFileSize(bstrFilespec, bstrPathDir, llFileSize)
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(500) [00000000034BD250]  NORMAL <--CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.521 61 neapplicationnamespace.cpp(500) [00000000034BD6D0]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.522 61 neapplicationnamespace.cpp(500) [00000000034BD6D0]  NORMAL <--CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.522 61 neapplicationnamespace.cpp(500) [00000000034BD820]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.530 61 neapplicationnamespace.cpp(500) [00000000034BD820]  NORMAL <--CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.530 61 neapplicationnamespace.cpp(500) [00000000034BE920]  NORMAL ==>CNEApplicationNamespace::EnumerateChildren
    115C 1B84 07/14 02:06:50.539 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.539 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.542 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.542 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.545 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.545 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.547 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.547 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.548 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.548 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.549 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.549 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.552 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.552 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.555 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.555 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.555 61 neapplicationnamespace.cpp(2250) [00000000034BE920]  NORMAL InitializeSQLQueryHelper: SQL Query Helper is initialized to SQL Instance [SQL1234\TEST] from SQL Instance []
    115C 1B84 07/14 02:06:50.573 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.581 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.581 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.584 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.584 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.587 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.587 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.590 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.590 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.591 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.591 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.592 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.592 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.594 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.594 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.597 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.597 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.598 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.606 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.606 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.609 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.609 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.612 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.612 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.614 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.614 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.615 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.615 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.616 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.616 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.619 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.619 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.621 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.621 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.623 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.631 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.631 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.633 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.633 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.636 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.636 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.639 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.639 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.640 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.643 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.643 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.646 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.646 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.647 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.655 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.655 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.658 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.658 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.661 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.661 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.664 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.664 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.665 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.668 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.668 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.671 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.671 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.672 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.680 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.681 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.683 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.683 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.686 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.686 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.688 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.688 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.689 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.689 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.690 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.690 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.693 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.693 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.695 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.695 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.697 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.705 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.705 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.707 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.707 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.710 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.710 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.713 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.713 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.714 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.714 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.715 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.715 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.717 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.717 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.720 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.720 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.722 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.730 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.730 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.732 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.732 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.735 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.735 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.737 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.737 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.738 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.738 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.739 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.739 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.742 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.742 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.745 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.745 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.746 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 1, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.754 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.754 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.757 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.757 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.760 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.760 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.762 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.762 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.763 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.763 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.764 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.764 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.767 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.767 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.769 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.769 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.771 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.779 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.779 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.782 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.782 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.784 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.784 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.787 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.787 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.788 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.788 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.789 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.789 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.792 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.792 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.794 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.794 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.796 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.804 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.804 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.807 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.807 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.809 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.809 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.812 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.812 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.813 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.813 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.814 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.814 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.816 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.816 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.819 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.819 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.820 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.828 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.828 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.831 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.831 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.833 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.833 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.836 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.836 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.837 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.837 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.838 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.838 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.840 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.840 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.842 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.842 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.844 61 neapplicationnamespace.cpp(2439) [00000000034BE920]  NORMAL IsIncrementalAllowed --> countSimpleMode 0, countReadOnly 0, countLogShipPrimary 0
    115C 1B84 07/14 02:06:50.851 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.851 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.854 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG1
    115C 1B84 07/14 02:06:50.854 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.857 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.857 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.859 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG2
    115C 1B84 07/14 02:06:50.859 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.860 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.860 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.861 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG3
    115C 1B84 07/14 02:06:50.861 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName
    115C 1B84 07/14 02:06:50.864 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.864 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for VirtualServerName
    115C 1B84 07/14 02:06:50.866 03 clusterutil.cpp(1147) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] GetStringPropertyInList failed for resource AAG4
    115C 1B84 07/14 02:06:50.866 03 clusterutil.cpp(432) [0000000003FADD00]  WARNING Failed: Hr: = [0x80070002] : ResUtilFindSzProperty failed for InstanceName

  • Error when upgrading from SQL Server 2005 to SQL Server 2014

    Hello everyone,
    Could you help me, i have an error when i try to upgrade my SQL Server 2005 Enterprise Edition to SQL Server 2014 Enterprise Edition,
    All of prerequisits are available and i dont have a problem,
    before the end of migration process, i have this error: The group name could not be found (0x84BB0001)
    File log:
    Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
    command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
      Component name:                SQL Server Database Engine Services Instance Features
      Component error code:          0x84BB0001
      Error description:             The group name could not be found.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
    Best regards,
    Guiga Hafedh

    There are more detailed logs for the various components. The one of interesting is the one for the engine or possibly the one for full-text.
    These logs are extremely verbose, and the errors are rarely crystal clear, but at least give them a try. If you have problems, find a place to upload them (Dropbox, Skrydrive etc), so that we can look.
    The closest at hand is that "group" that cannot be found is an AD group.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Unexpected Termination SSIS package - Issue with SSIS packages after upgrading to SQL Server 2014

    Hello everyone.
    We performed an upgrade of SQL Server 2012 installation to SQL Server 2014 (with last CU5 update). We found that all SSIS packages (even the simplest with just Execute SQL tasks) fail with Unexpected termination message. The issue reproduces with both new
    packages (that are created from scratch with SSDT 2014) and old packages (migrated from SQL 2012).
    Any ideas, please? We googled and found that it is a known issue that should have fixed with CU4. But we use CU5 and the issue is still here.
    MCP

    Hi. Yes...
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="SQLISServer" /> 
      <EventID Qualifiers="0">1</EventID> 
      <Level>2</Level> 
      <Task>0</Task> 
      <Keywords>0x80000000000000</Keywords> 
      <TimeCreated SystemTime="2015-02-12T07:41:56.000000000Z" /> 
      <EventRecordID>469950</EventRecordID> 
      <Channel>Application</Channel> 
      <Computer>abtru1a11.oneabbott.com</Computer> 
      <Security /> 
      </System>
    - <EventData>
      <Data>The SSIS Execution Process could not write to the IS catalog: ABTRU1A11\DEV:SSISDB Error details: Cannot find the symmetric key 'MS_Enckey_Proj_Param_5', because it does not exist or you do not have permission.; at System.Data.SqlClient.SqlConnection.OnError(SqlException
    exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior
    runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData()
    at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
    Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion,
    Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
    behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at Microsoft.SqlServer.IntegrationServices.Server.Shared.ExecutionParameterLoader.GetExecutionParameter() at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.StartPackage()
    at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.PerformOperation()</Data> 
      </EventData>
      </Event>
    MCP

  • SSIS packages are failing after upgrade to SQL server 2014

    Hi,
    I have some SSIS packages running on SQL server 2012 .
    After I upgraded to SQL server to 2014 from 2012 , the SSIS jobs are failing on the SQL agent.
    And i can see its related to Data source connectivity to the SQL agent. I hope it not able to identify the connection manager in SQL agent. And connection adapter is not upgraded.
    I read some articles about this and they say it not able to connect to SQL server agent job.
    And, I can see that the package is running if i run manually using SQL 2012 run time.
    Why its not running on SQL 2014 ?
    did i  miss anything while upgrading SQL server 2014 ?
    Please give me some suggestions to solve this issue. 
    And is there any way i can change the SQL server agent 2014 to adapt this and run ?
    Below is the error : 
    The Package filed to load due to error 0XC00100014 " One or more error occurres. There should be more specific errors preceding this one that expalins the details of the erroes. This message is used as a return value from functions that encounter
    errors.: This occures when CPackage::LoadFormXML fails.
    Regards,
    Vinodh Selvaraj.

    I think you have typed this error message by yourself.
    Anyway, as it says there should be more error preceeding to this. Do you have any other errors which describles the exact issue stating at what task it fails?
    If not, then there are various reasons behind this issue. 3rd party connection manager such as Oracle Attunity or it may be 32/64 bit issue.
    You may try executing package in 32 bit mode from SQL Agent Job.
    Please refer:
    http://blogs.msdn.com/b/farukcelik/archive/2010/06/16/why-package-load-error-0xc0010014-in-cpackage-loadfromxml-error-appears-while-trying-to-run-an-ssis-package.aspx
    http://www.bidn.com/blogs/timmurphy/ssas/1397/package-failed-to-load-due-to-error-0xc0010014
    -Vaibhav Chaudhari

  • Upgrade to SQL Server 2014

    Should there/Would there be any issue/s I might run into with upgrading from SQL Server 2008 to 2014 ?
    Or any known issue/s?
    Yes, I understand this is project server; however the SQL software was acquired (about time) and we're planning the migration/upgrade for the SQL Server for project server.
    Thank you for any and all help/suggestions/ideas
    kbwrecker

    Further to this, even Project Server 2013 isn't supported on SQL Server 2014 yet:
    http://technet.microsoft.com/en-us/library/ee683978(v=office.15).aspx see: "SQL Server 2014 is not yet supported for Project Server 2013."
    So previous versions of Project Server wont be supported.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • SQL 2014 Upgrade Advisor

    Hey there,
    I've installed SQL 2014 Enterprise on a VM and am trying to install the Upgrade Advisor.
    Directions indicate that I should run SqlUA.msi but I get the following error:
    ========================================
    Setup is missing prerequisites:
    -Microsoft SQL Server 2014 Transact-SQL-ScriptDom, which is not installed by Upgrade Advisor Setup. To continue, install SQL Server 2014 Transact-SQL ScriptDom from below hyperlink and then run the Upgrade Advisor Setup operation again :
    Go to http://go.microsoft.com/fwlink/?LinkID=296473.
    ========================================
    That just takes me to the download page. There is no ScriptDom file, but a further search showed me that they mean SQLDOM. So I installed SQLDOM.msi from that page above and got the following error:
    ========================================
    Microsoft SQL Server 2012 Transact-SQL-ScriptDom
    Installation of Microsoft SQL Server 2012 Transact-SQL-ScriptDom failed because a higher version already exists on the machine. To proceed, uninstall the higher version and then run Microsoft SQL Server 2012 Transact-SQL ScriptDom Setup again.
    ========================================
    Well, that was pretty confusing. First I'm told I don't have it, then I'm told I'm trying to install an older version. I've rebooted the VM and my local laptop a bunch but without assist. Microsoft Support told me they don't support upgrade advisor.
    Any assistance is much appreciated.
    Thanks
    Andre

    Hello,
    Please on the following link:
    http://www.microsoft.com/en-us/download/details.aspx?id=42295
    Click on Download, then scroll down the bar with your mouse, and choose:
    ENU\x86\SqlDom.msi 
    (32-bit)
    ENU\x64\SqlDom.msi  
    (64-bit)
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Upgrade from SQL Server 2005 to SQL Server Express 2014 Enterprise

    I was just wondering if it is possible to upgrade from SQL Server 2005 to SQL Server Express or will I have to build the environment and then migrate the database?
    Thanks for any help

    Hi Lance_Romance,
    As others’ posts, you don’t have to build new environment and then migrate databases between SQL Server instances, you can use the in-place upgrade strategy to upgrade from SQL Server 2005 to SQL Server 2014 .Please note that SQL Server 2005 SP4 is required
    in this case.
    Before upgrading , I recommend you to use
    upgrade advisor, it can help to analyze your existing SQL Server deployment and inform you of issues that need to be addressed.  In addition, please perform a full server backup prior to performing the in-place upgrade, which will be an important way
    to revert your SQL Server to its previous state if the upgrade does not go as planned. For more details, please review this blog:
    Upgrading to SQL Server 2014: A Dozen Things to Check.
    Thanks,
    Lydia Zhang

  • SQL 2005 to SQL 2014

    The following MSDN reference
    http://msdn.microsoft.com/en-us/library/ms143393%28v=sql.120%29.aspx says
    SQL Server 2014 supports upgrade from the following versions of SQL Server:
    SQL Server 2008 SP3 or later
    SQL Server 2008 R2 SP2 or later
    SQL Server 2012 SP1 or later
    However, in our testing, it is possible to upgrade from SQL 2005 SP4 to SQL 2014.  There are no messages or detection errors when doing so.  Will the final release of SQL 2014 support upgrading from SQL 2005 directly or will there be detection
    added to the installation to prevent it?

    Hello,
    SQL Server 2005 won’t be supported as a valid upgrade path when SQL Server 2014 RTM is released as the article you posted states. The behavior you are seeing with the CTP version of SQL Server 2014 maybe is part due to some binaries of the SQL Server 2012
    version still in use on the CTP version.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • SQL Server Data Tools for SQL 2014 setup

    Hello,
    I have been using SQL server 2008 with Visual Studio 2008 to perform the ETL processes.
    I have recently got SQL 2014 and realized that Business Intelligence Development Studio does not come with it so I have to download SQL Server Data Tools for Visual Basics 2012 or 2013 from:
    https://msdn.microsoft.com/en-us/data/hh297027
    Can someone advise what exactly I have to do if I want to start using SQL  2014 with SSDT? I still have VB 2008 installed and all my packages were created with that version.
    Do I need to download VB 2012 or 2013 plus SSDT and then SSDT? Do I also uninstall VB2008?
    Thanks in advnce

    Hello,
    If you want to keep developing packages for SQL Server 2008 then you need to use BIDS 2008, you cannot use SSDT.
    If you want to upgrade BIDS projects to SSDT, then you can use Integration Services Project Conversion Wizard from Visual
    Studio or SSIS Package Upgrade Wizard from SQL Server Management Studio (SSMS).
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

Maybe you are looking for