Upgrade to tiger, can't print from any app

Hi All
I normally fix my own problems, but this has me stumped.
I've upgraded to tiger and done a software update to 10.4.7.
Now I can't print from any app.
I've done the "reset printing system" but this hasn't worked.
All my printers are ethernet networked, no USB.
At this time of writing, I have just managed to print from indesing CS2, but nothing else, mail, textedit, acrobat, none of them work...
...Don't suppose anyone has any ideas?
PS, when I attempt to print, my app is quit and I have to relaunch.
Az
G5dp, G4qs, mini, eMac, G3 & iPod... big TFT & Nespresso coffee machine!   Mac OS X (10.4.7)   Should of stayed with panther!

I had the same problem when I upgraded to Tiger. I have a HP PSC 2175 All-in-one printer. I solved my problem by uninstalling the HP printer software, emptying the trash, restarting, and reinstalling the HP printer software. I also installed the lastest HP printer driver, which I downloaded from the HP website.
I repaired permissions after doing all that, and now everything seems to print fine.
I suspect the same steps might work for other printers, as well.
The relevant page from the HP site is here: http://tinyurl.com/ztkwq
Macfixit also has a tutorial for troubleshooting printer problems. I have not tried any of the solutions which involve downloading troubleshooting software. Maybe someone else here can say whether the software mentioned in the article works well or not. You can find the Macfixit information here: http://www.macfixit.com/article.php?story=20060724111816602
Hope that helps.
17-inch iMac G5   Mac OS X (10.4.7)   512 MB RAM

Similar Messages

  • Magenta cast when printing from any app in Mountain Lion

    I get a serious magenta cast when printing from any application using my Epson R3000 inkjet. I am aware of the double profile issue. For example in Photoshop I let it do the color management. ML automatically turns off printer color management. My monitor is calibrated with Xrite Color Munki. I did not have this issue before upgrading to ML 8.2. Is there a driver issue?

    In System Preferences->Monitors->color is the correct
    color profile set?
    Do you you have the correct profile for the printer
    selected in Photoshop?
    Also, are you using Proof Setup in Views?
    Need to ask since sometimes a person can stare at
    something too long and think it is correct (done it myself often).
    It may not be a driver but an issue with color profiles.
    It is possible one or more of the color profiles may be corrupted.
    Go to Utilities->ColorSync Utility select and run Profile First Aid.
    See if problems found in profiles.
    Using PS CS6 myself and have not seen any such issues with
    color and 10.8.2.

  • Major Printing Problem - Can't Print in any App, with Any Printers

    I help my Aunt with her three Macs (2 eMacs, 1 MacBook, all running 10.4.8 right now) at her office, and she had me come to help recently because one of the eMacs stopped printing anything; here's what happens:
    In every app besides Word (e.g. Safari, TextEdit, AppleWorks, etc.): If I click File>Print... or press 'Command-P,' the cursor turns into the spinning rainbow for a few seconds, and nothing happens (meaning I can do anything I want in the application, as if nothing at all happened).
    In Word: If I click File>Print... or press 'Command-P,' Word sits for a minute with the spinning rainbow, then locks up and quits itself. BUT, if I click the little 'print' button in the toolbar (the one that bypasses the print dialog box), the file will print.
    I tried resetting the printing system, setting up different printers on the computer, printing over the network and over USB (directly connected to port 1 on the eMac), and re-downloading/installing the printer drivers for the Brother 5250DN laser printer AND the HP LaserJet 1200 laser printer, but all to no avail.
    I can run the Printer Setup Utility and recognize the printers (via Bonjour over the network and via USB), and the computer can run the printer setup utilities, so I know the printer communicates fine with the computer. I also can print to the printers (both the networked one and the Brother) from any of the other Macs (including my own laptop) over the network. But I can't get the print dialog box to show up for any printer on the one eMac.
    I'm determined that this problem lies within the OSX printing system, but reinstalling the whole OS is not an option, as I would have to re-setup all the software, user accounts, special network settings, etc. (even if I do an Archive and Install). Is there anything I can do??? (I seem to recall someone else having this problem, but I can't find that thread on the forum).

    There's another thread describing this same problem. I am having the issue too. As I posted in the other thread:
    "Well, I did a full Archive and Install, with restore user settings, and the thing still won't print! All apps crash when trying to print (except Mail.app, which is odd). So it appears all of the files required for printing are there since Mail.app works, but I still can't print from Safari, Firefox, Preview, TextEdit, etc etc. ARGH!!!!
    Next step is to downgrade to 10.4.8."
    If that doesn't work, I guess an Erase and Install would be th next step.

  • Can't print from any account and any application

    I have a ibook that can't print to a hp1320n through wireless connection from any user account and any application, other machines have no problem.
    It works before. below is part of the error log. An yhelp will be appreciated.
    Thanks
    Allan
    I [10/May/2006:09:51:16 -0700] System woke from sleep
    I [10/May/2006:09:55:57 -0700] System going to sleep
    I [10/May/2006:09:56:15 -0700] System woke from sleep
    I [10/May/2006:10:22:42 -0700] Printer 'mcx_1' deleted by ''.
    I [10/May/2006:10:22:42 -0700] Saving printers.conf...
    E [10/May/2006:10:22:42 -0700] getprinterattrs: resource name '/printers/mcx_1' no good!
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 device-uri to "smb://server/HPLaserJ1320" (was "file:/dev/null".)
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-is-accepting-jobs to 1 (was 0.)
    I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-state to 3 (was 5.)
    I [10/May/2006:10:24:16 -0700] Saving printers.conf...
    I [10/May/2006:10:24:16 -0700] New printer 'HPLaserJ1320' added by ''.
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00001"
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
    E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00016"
    E [10/May/2006:10:26:48 -0700] getprinterattrs: resource name '/printers/??' no good!
    E [10/May/2006:10:26:49 -0700] getprinterattrs: resource name '/printers/?? no good!
    E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
    E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
    I [10/May/2006:10:34:55 -0700] Scheduler shutting down normally.
    I [10/May/2006:15:22:04 -0700] Listening to 7f000001:631
    I [10/May/2006:15:22:04 -0700] Listening to 300ae0:0
    I [10/May/2006:15:22:04 -0700] Loaded configuration file "/private/etc/cups/cupsd.conf"
    I [10/May/2006:15:22:04 -0700] Configured for up to 100 clients.
    I [10/May/2006:15:22:04 -0700] Allowing up to 100 client connections per host.
    I [10/May/2006:15:22:04 -0700] Full reload is required.
    I [10/May/2006:15:22:04 -0700] Full reload complete.
    I [10/May/2006:15:22:04 -0700] Printer sharing is off and there are no jobs pending, will restart on demand. Exiting.
    I [10/May/2006:15:23:02 -0700] Listening to 7f000001:631
    ibook   Mac OS X (10.4.3)  

    What was the solution?

  • Can't print from any application in OS X Snow Leopard??

    Before the print dialog box comes up, the spinning beachball wheel comes up.
    I then have to force quit the application. I have tried resetting the print system but no joy.
    I have done a complete wipe and time machine restore and the problem is still there.
    I have binned the print prefs and also the relevant print folder and downloaded updates. not worked.
    Done disk permissions and disk first aid.
    Any other suggestions??!!

    Yep, tried that, however I created a new user and the problem was still there, so I used time machine to go back a couple of weeks and restore the main library folder. Now it prints fine, so there was something in that folder the system didn't like

  • Memory died, replaced but now can't print with apple apps

    User installable memory died, kernel failures, finally froze, replaced, all better but had to use Diskwarrior to clean up mess on hard drive. Now everything works BUT I can't print from Apple apps. MSOffice updated and prints, Safari, appleworks etc. don't all crash when printing. Cleaned out Printing PPD's, printer defs in Library, reinstalled printers from scratch, disk repair, etc. Even rezapped PRAM again. No luck.
    Seems like this is tied to an apple OS function I haven't found yet.
    Anybody got any ideas before I reinstall the OS?
    thanks

    Thanks Greg,
    Well, bottom line, had to nuke the HD and reinstall the entire system. Everything is fine. Seems the archive and install couldn't deal with the degree of disk confusion caused from the declining memory prior to failure.
    thanks

  • Cannot print from ANY application after upgrade to 10.4.8 !!!

    Hi all,
    as it is written in the subject.
    Up to yesterday, I had OS 10.3.9, everything ok, could print from any application.
    Then I moved to Tiger and to the last version (10.4.8).
    And today the "nice" surprise: either from Preview, Texshop, Word, any web browser... I cannot print anymore!! As soon as I go to file/print, the application crashes, any suggestions??
    Thanks a lot

    Hmmm. It sounds like a possible problem with the system prior to updating. If you've done this already don't be upset by the suggestion. I'm just trying to cover the bases.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.5.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
    Download the standalone 10.4.8 Combo Updater (be sure to get the correct version - Intel or PPC - for your Macs. Reinstall the update using the Combo Updater.
    As an added precaution I would recommend you first boot into safe mode before doing the above.
    There is a shareware utility called Printer Setup Repair (www.macupdate.com) that you can also try. It is sometimes very useful for fixing problems with the printing system.

  • After upgrading to iOS 8.0.2, I can't print from my iPhone 5s

    After upgrading to iOS 8.0.2, I can't print from my iPhone 5s.  My iPhone 4s and iPad continue to print.  When I try to print to either printer, the message reads,"contacting printer," and then, "preparing to print."  But nothing prints.

    Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

  • How can I add my HP Photosmart C4180 to my home network so that I can print from any of my computers

    I am trying to set up my HP C4180 to my home network so that I can print from any of my computers without having to have them attached by USB.
    The YouTube video I watched was for a different HP printer and the installation of my HP C4180 did not give me the option of selecting printing through a network.
    I currently have the printer attached to my desktop, but do not like having to keep the desktop on just so that I can use its shared printer. Is there a way to add the printer to the network independent of my desktop?

    You could buy a router that supports USB printers, but with that (and your current setup) you can only access printing, not scanning.
    I recommend a new wireless printer.  They are not very expensive and can be placed anywhere in your home that has wifi access.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Can't print from safari to hp 4620 appears to print but does not first to print from safari notes print no problem any suggestions?

    Can't print from safari to hp 4620 appears to print but does not first time i have attempted to print from safari , notes print fine no problems. It is like on a desktop my print is sitting in the queue there are error messages only the usual print dialogue. I've turned the printer off and back on with no luck any suggestions?

    That's very strange.  See if clearing the cache in Safari will make it work.  I'll include the steps below.  If that doesn't help, install a different browser, such as Opera, to see if that will print from pages that Safari won't.  If it will, then something is wrong with Safari.  If it doesn't print, then the web pages might have printing blocked.  There are sites that are doing that for copyright reasons.  Let me know what you find.
    To clear the cache on Safari:
    Open Settings.
    Select Safari
    Touch Clear Cache.
    Select Clear.
    Touch Clear Cookies.
    Select Clear.
    Touch Clear History.
    Select Clear.
    I am a printer tech for HP.

  • Can't print from Tiger to a shared printer on Mountain Lion

    Hello,
    I have a branch office that's running Mountain Lion on one computer and Tiger on the other.  How can I print from the Tiger machine to a shared printer on the Mountain Lion computer?  I should point out that this isn't a problem when the printer is shared from the Tiger machine, just the other way around.
    Thanks,
    Patrick

    https://discussions.apple.com/message/19078051

  • Can't 'print to pdf' from ANY app, it just...

    stops after processing some bytes.
    As the title says, happens from any app, text, preview, word, safari, firefox...
    and upon further inspection, distiller crashes when trying to distil a .PS file (generated from indesigncs2) into a pdf.
    i have tried:
    repair prefs
    deleted distiller and acrobat related prefs
    reinstalled acrobat (version 7 btw)
    tried to use distiller and 'print to pdf' option prior to each option - still no go.
    however, i created a new account, and in the new account, it worked fine hmmm, so its my account..
    what can i do to fix my pdf problems??
    thanks in advance.
    --its osx 10.4.8, 12" powerbook--

    sim888,
    Welcome to the Apple Discussions!
    Nice troubleshooting, particularly using another user account to determine it's something in your account that's causing the problem. Without dragging your entire user Library/ Preferences file to the Desktop and then returning .plists a few at a time to watch for the problem to return, you could check your user preferences (.plist) files in Terminal by entering the command:
    find ~/Library -name '*.plist' -exec /usr/bin/plutil -lint {} \;
    You can also download Preferential Treatment
    I've seen scattered reports of problems using OS X's built-in print-to-PDF when some versions of Adobe software are installed. Are Distiller etc. installed for general use or under the relatively rare single-user access? In the hunting in the dark category, with no programs open, you could look at Activity Monitor in both user accounts and see if you spot any background user (non-system) processes running in your normal user account that aren't in the test user, then force-quit those user processes to see if printing to PDF works without conflicts. I'm not sure what log a failed print to PDF would go into, but you can open Console look through console.log, system.log, and CrashReporter et al. for events timestamped around the time of a failed print-to-PDF attempt. The backtrace of any failure report may provide additional clues.

  • How do I add a "PDF printer"  print to PDF so that I can create PDFs from any source I can print ?

    How do I add a "PDF printer"  print to PDF so that I can create PDFs from any source I can print ?
    I am using ADOBE Reader X Thanks

    Pat;  using Windows you can create a "PDF printer" which is a virtual device that you can select when you want to create an Adobe PDF file from anything you normally would print to hardcopy.  As an example if I were on a webpage article that spanned two or three pages so a screen capture wouldn't really work, if I had a "Adobe PDF Printer" I would select that as my default printer and then print the webpage article.  Instead of the webpage article going to a real printer and producing hardcopy, the Adobe PDF printer would ask me for a file name and then "print" the file by creating an Adobe PDF file.  Does that help ?  Best regards,  Doug

  • I was wondering, is there an application I can download from the App Store that allows me to plug in a USB cord from my Iphone and print from any computer?

    I was wondering, is there an application I can download from the App Store that allows me to plug in a USB cord from my Iphone and print from any printer?

    Sorry but no. iOS does not support connecting a printer via USB, only via WiFi, and without such support there's no way a developer can build an app to provide such capability.
    Regards.

  • I am having trouble with my iphoto. I can't print from there or do much of anything. When i double click on an event it doesnt open. Any suggestions?

    I am having trouble with my iphoto. I can't print from there or do much of anything. When i double click on an event it doesnt open. Any suggestions?

    ~/Library/Preferences/com.apple.iPhoto.plist
    ~ = your home folder
    Here's a picture
    Chris

Maybe you are looking for

  • How can I batch convert Page Documents to the Doc format, and keep them in the same folder?

    I have hundreds of Page documents in a folder structure for school that all need to be converted, but remain within the folder structure. Are there any scripts or methods to make this task easier before I go by this one-by-one?

  • Invalid number error for bind dialog

    Oracle SQL Developer version 1.1.2.25 BUILD MAIN-25.79 Running under WinXP Issue description: We get an invalid number error when bind variable filled with an enter in the bind dialog

  • Extract XML attribute value for multi-item sequence

    Guys, I have already posted this in the XML DB forum, but am relying that some of you might help me. I have been searching for a solution for this and couldn't quite get it. I'm trying to get attribute values from multiple entries in a Node. It worke

  • T500 BIOS disables USB booting (BUG)

    I am reporting this here as a coutesey to the rest of the T500 users. I boot from a lot of different USB media.  I have about 6 different OS/s that I regularly boot from.  I use them day-to-day for my development work.   I have been using my T500 for

  • Question reg. selection screen

    I am writing a report. On selection screen, I have a field for Sales order (vbeln) from a custom table zsales.  Now when the user selects this field on selection screen and press F4, he/she should be able to select the salesorders from the table zsal