Upgrade to Tiger now have network problems.

We have two G4 macs on a network with a Windows 2000 PC that is the computer we store files on. Everything was fine untill we went to Tiger. Now when we connect to the IP server and go to the files on the windows PC all the files dissappear when you click on them. What could cause this? I can see and share files with the other G4 macs fine just not the PC.
Any ideas why and how to fix this?

Re-creating all workbook, that's what I tried to avoid.
I did re-install again all the steps and also re-install the MS office, still didn't work.
I did install new fresh ms windows xp, and follow the steps, still didn't work.
Another posting on same issue:
[Problem with BEx workbook u2013 canu2019t find project or library]
By the way, since the company implemented APO on NW70, SAPgui 710 is prerequisite..is must.
It's time to create message to SAP?

Similar Messages

  • Upgraded from panther to tiger, now have several problems...help??

    Hey guys(and girls)
    i recently upgraded my iBook G4 from panther to tiger and am having some problems...first off Airport only get 2 bars...if im lucky. my room is about a good 15 feet from the router, and we are using 802.11G. i put it right next to the router and same. 2 bars. also my other problem is that my iBook tries to open .BIN files in quick time and an error pops up because quick time doesnt support .BIN. any help would be appreciated

    Hello Leesa2
    If it is Connected then please try to register your device to Wireless provider .
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Wait till a Registration messages comes in your message box.
    After that  perform a battery pull restart like this while the device is powered On remove your battery wait for a min. then reinsert it back.
    From your BlackBerry Browser Go towww.blackberry.com/integrate  then try adding your email  account.Please try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Now that I have upgraded to Yosemite I have a problem when I scan documents.  Before, a window showed today's activity.  Now I have to search through all my documents and hope to find what I just scanned.

    Now that I have upgraded to Yosemite I have a problem when I scan documents.  Formerly, a window showed today's activity.  Now, I have to search through all the documents in my history to find what I just scanned.  Sometimes I can't even find the doc.

    Most scan apps have a setting whereas, your scan(s) can go directly to your desktop.  No need to "hunt" for scanned docs.

  • I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

    I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK.  Also I cannot drag the selection to another photo in the photo bin as before.

    Hi,
    Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

    I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
    Thanks,
    Eyal

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

    I am in Thailand and have True internet is this why I can't use Face time. I get the message I have network problems when I log in.

    Is the Face Time Service avabial in Thailand?

  • TS3367 my FaceTime won't let me log in, what should i do? it says i have network problems but everything else to do with internet is working!

    my FaceTime won't let me log in, what should i do? it says i have network problems but everything else to do with internet is working!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Over the years and upgrading machines, I now have over 20k of emails in the import mailboxes within several folders. How can I archive these in way so the are still available, if necessary, to search, but don't load and slow down my mail app.

    Over the years and upgrading machines, I now have over 20k of emails in the import mailboxes within several folders. How can I archive these in way so the are still available, if necessary, to search, but don't load and slow down my mail app.

    Ok Thank you.
    I wont worry now.
    Just maybe dig in deep and delete the deleted mails that are still around and that will hopefully clean it up a bit.
    Many thanks for your help and advice.
    Regards
    Chrispl0

  • I can't access my Numbers documents now that I have 10.9.3.  It says I have to buy and upgrade. Anyone else have this problem?

    I can't access my Numbers documents now that I have OS Mavericks 10.9.3.  It says I need to buy an upgrade for 19.99 to access them.  Anyone else have this problem?

    If you upgraded from previous OS, Look in Applications folder for an iWork folder and launch old Numbers from there.
    If you clean installed, look for your old install disks for iWork and reinstall.
    They will run on Mavericks but they need to be there.

  • Upgraded Mac Mini to 10.6.4 now have sound problems

    Just upgraded my mac mini to 10.6.4 and now have sound distortion. Itunes is extremely tinny sounding, fades in and out, distorted and muffled sounding continually. Sound worked fine since I purchased it back in november but now since the update it is distorted. I also notice that if I listen using iphone headphones the sound is just as distorted.
    Any ideas how to resolve this? I tried reloading itunes, checked sound/speaker preferences, rebooted the system a couple times, unhooked speakers and reconnected them. I am totally frustrated with this.
    thanks for any help on this issue.

    have you repaired permission before and after the upgrade ?
    also, did you use *software update* from the  menu to install the upgrade ?
    if so, download the combo updater from here http://support.apple.com/kb/DL1048 and apply it.
    JGG

  • Upgraded from Tiger - Now no mail

    Please bear with me while I type this. I want to be sure everyone understands what happened and I need to be sure I can explain this right.
    I just recently upgraded from Tiger to Leopard. I did not backup any info from my hard drive prior to upgrading. Yes, I know, I'm an idiot. I lost power to my computer during the upgrade and it corrupted my hard drive. I did have a Windows partition so I was able to install Leopard on there and extract all my important stuff from the Mac partition. To make a long story shorter, I have all my photos, movies, music and documents. I formatted my hard drive to have only one partition and installed Leopard. Everything is working great and I love it. The only problem that I'm having now is that I have tried to get my mail many times but I can't get Apple Mail to connect. My internet works fine and I'm able to access my mail through the web on .Mac.
    Could one of the reasons why this is happening is because I copied the Mail and Mail Downloads directory from my Library from Tiger and put it into the same spot on Leopard?
    Or do I need to just delete all the info from Mail and start from scratch since all of my mail is still on .Mac servers? I'm sorry if this is confusing, I just want to get my mail back instead of having to go through the web browser to get to it.
    Thanks to all that can help.
    -Thasro

    Question has been answered. To solve my problem I needed to log out of .Mac through my system preferences. From there, delete all mail accounts from Mail and close out Mail. Go back into system preferences, log into .Mac and check the sync settings. Then do a manual sync to sync everything to my MacBook Pro. This solved my issue because when I originally set up my sync settings after upgrading to Leopard, it never did sync all of my info. This time around it did.

  • Installed Leopard 10.5.2, now have wifi problems

    I upgraded my macbook to 10.5.2 last night, and everything seemed fine. I was able to get on my home wireless (WEP security) with no prob and do a sys update. I took it in to work today, and the wireless was a no-go. It's an open network, don't need to log in. I didn't have a problem joining it with 10.4.x, but now I have to type the network name in manually via "Join other networks" in the airport drop down.
    Even after I connect via this method, it won't connect to the internet, as it will only do a self-assigned IP address. Just to check, I used a co-worker's macbook (same as mine, just with 10.4), and it still worked fine.
    The only thing that has changed on my system is the new OS.
    Hint/suggestions? Thanks!

    Try this. Navigate to /Library/Preferences/SystemConfiguration/ folder. Delete all but the com.apple.Boot.plist and com.apple.PowerManagement.plist files.
    Restart the computer and reconfigure Network preferences.

  • Upgraded AIX/Java - Now have JDBC Errors

    Hello All,
    I have recently upgraded AIX 4.3.3 to 5.1 and at the same time upgraded Java 1.2.2 to 1.4.
    I am now having JDBC problems in my Java programs. All Java threads run ok, however I get the following error when trying to run
    a JDBC call as part of the program:
    IBM][CLI Driver] SQL1224N A database agent could not be started to service a request, or was terminated as a result
    of a database system shutdown or a force command. SQLSTATE=55032
    Is there anything I need to do to tell DB2 about the new Java version? I do not seem to have an updated db2java.zip, so am still
    using the previous one in the CLASSPATH.
    Thanks In Advance

    I do not believe DB2 works with Java 1.4... I posted a similar question a while back but got no answer! You might want to remove 1.4 and install 1.3.1 instead.
    :o(
    V.V.

  • Upgrade to Tiger, now I can't access App prefs

    I recently upgraded to tiger (Archive and Install method). Now when i'm running iChat or Safari (maybe others as well) when I chose Preferences or push comand - "," nothing happens. Anyone else experience this? Any work arounds? I tried trashing preference files, repairing permissions, and the usual compliment of troubleshooting techniques to no avail.

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * Open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • Iv'e had my mac for 2 weeks & now have a problem with safari since I changed to a wireless super hub.  It will not open a web site I use my iPad & windows lap top will.  Apple support say it's the DNS settings cable say there okay please can anyone help

    Iv'e had my mac for 2 weeks safari was working great until I changed to a wire less super hub.  Safari will not let me open & log into a web site I go on a lot.  My ipad & windows lap top will on the same network.  Apple have said it's the DNS setting my cable provider say it's not it's a problem with my mac.  Iv'e phoned apple lots of times same with cable provider Iv'e tried a few things it has not helped solve the problem.  I'm now advised to return my mac to the shop for a check.  Has anyone else had this problem I would appreciate any help because I'm going round in circles.

    Adding a couple of DNS numbers sometimes helps:
    System Preferences>Network, select your wifi or ethernet network on the left and click on the 'advanced' button and then the DNS tab. On the left side of the window make a note of any DNS numbers listed so that you can re-instate them if necessary and then click on the '+" button bottom left of the window. Type 8.8.8.8 and click the + again and type 8.8.4.4 save the settings and try the website again.
    BTW, I have the same problem with Firefox not letting me input my password in secure sites. I did find a workround in the network settings in Firefpx prefs, but it didn't stick so I reverted to using Chrome as alternative browser. No problems with that so long as you don't mind Google looking over your shoulder

Maybe you are looking for

  • Work area colours different to exported colours?

    I have a wierd problem. When working within photoshop i can choose colours that i want but they show up a bit lighter on the screen in the work area, and when i click to export or save as the colours are shown a little darker and more saturated. The

  • Sent Mail from IPAD using Mobile Iron and Exchange 2010

    Hi all, Not sure you can help me with this one but i thought i would give it a shot. I am running Exchange 2010. Users can access email using iPad and other approved devices using Mobile Iron (onboarding app). I had a user who received a HTML message

  • Final Cut Studio Tutorial

    Please pardon my ignorance - but I did a search and came up with a ****-ton possible answers. I am interested in Final Cut as opposed to what I have been using: iMovie I have messed around with FCP a little bit - but I am lost. Can somebody please te

  • Named Queries and Null parameters

    I am trying to use null values in the where clause of named query. I have a named query defined in my Workbench (Toplink 9.0.4) and the where claus looks like this. WHERE PERSON.LAST_NAME=#lastName If a pass in a value for lastName, say "Jones", Topl

  • Red Eye Woes

    The red eye in iPhoto has does some strange things for me. It always had an issue where sometimes (seemingly randomly) it would apply redeye to an ENTIRE photo (red shirts, lips, face and all). This is obviously a useless feature and it takes a good