"Upgrade to USB 2.0" Help Please

I'm somewhat of a new mac user (almost fully converted) and I'm having trouble with my USB ports. I've learned that mine are 1.1 but my external drive requires 2.0. I read a few forum and learned that I could use a USB 2.0 notebook card. I ordered one and the card shows up in the bar at the top near the clock, but I still can't see my external drive. Am I doing something wrong? I should mention that the external drive I'm hoping to get to work with the Powerbook is one that is powered by the USB (no external power). To troubleshoot, I connected an old external with it's own power source and still got nothing through the new PC card...however, plugging it into one of the original USB ports worked fine.
That last part is what makes me think I'm not doing something correctly. Perhaps a mac setting that I'm not aware of. It is a Dynex DX-UC202 notebook card. I've read that people have it working with their macs so I'm not sure what to do.
Any info is greatly appreciated. Thanks in advance.
ps. Just thought I'd throw this out there for anyone still reading this. My ultimate goal is to have an external drive that I can share between a PC laptop and my Powerbook, one in which I can share an iTunes library. If anyone has better suggestions that what I'm trying to get to work, I'm all ears. Thanks again.

Hello bingston,
If the PowerBook that you are referring to is the 15" 1.5GHz Aluminum that you have listed, then it has 2 USB 2 ports, not USB 1.1
You should be able to power up your external drive directly from these USB ports.
The USB ports on Aluminum PowerBooks have a reduced power output, so you may need to use a double connection (most likely sent with the external hard drive enclosure if it is USB powered).
Hook it up to both USB ports directly and see if it doesn't startup your external and show it on your desktop.
I have an external USB hard drive that will startup with a single USB connection on the older Pismo & Titanium PowerBooks with 1.1, but needs a double connection to work on my Aluminum 1.25GHz with USB 2 ports because of this reduced power output.
By the way, all of the external enclosures that I have seen are actually backward compatible with USB 1.1 anyway.
As far as I know the connection with your PC Card should work automatically. Did it come with a driver installation disc? The reason that it is not working may be because your PowerBook lacks the proper drivers for it.
PB

Similar Messages

My MacBook Pro doesn't recognize my new iPhone in iTunes. It recognizes it in iPhoto and automatically uploads my photos. I have restarted the computer, checked for updates, tried a different USB port. Help please :-)

My iTunes isn't recognizing my new iPhone as a device. iPhoto recognizes it and uploads my pics. I've restarted the computer, updated itunes, tried a different USB port. Help please.

Does iphoto launch as soon as you connect your device?
If yes, did you try to disable the camera notification? iPhone and iPod touch: Disabling digital camera notification in Mac OS X

Black squares in camera roll instead of photos , only since upgrade to 7.1. Help please

Can anyone help me please.... I updated my Ipad 2 and iPhone 4s with the new software are requested (7.1). Since then my photos in camera roll on both devices have gone haywire, it seems that random pictures have been replaced with black squares and if I try and save an image from a website it saves just as a black square in the album. I have tried many of the ideas on this website but to no avail, does anyone know why this is happening please and how to correct it. Or is it possible to restore to the previous software please.
I am trying to save photos off my website to use in documents but can't save any
Thanks for any help

Messedupmybackup wrote:
I was on 7.1 and just updated to 7.1.2. Issue is I dint backup my iphone in 6 months as I did not have a permanent laptop. Now I just got a new laptop and decided to backup my iphone and also upgrade to 7.1.2. Issue is - while the update was in progress I disconnected the cable since I was getting late for an appointment. Now when I got finally upgraded to 7.1.2, I dont see my apps and music anymore. They all seem to disappear. I cant even back up to the older date. All I see is the option to back up to the 7.1.2 version only. The only solace is I still have photos intact. Rest all data seems to be gone. Please help!!! urgent!!!
Apps aren't part of the backup, only the app data.
See if you can redownload apps - settings - apps - update - purchase - hit cloud to redownload app.
Did you copy your iTunes media library to your new laptop?

Msi neo2-S usb problem? help please...

hello All
i'm a newbie here, and i have a problem with this motherboard
the usb port can't detect my usb printer.
is anyone knows how to fix this problem?
will flashing the bios can help?
thx a lot guys for the concerns!!!

This thread will be locked to serve as reference to any user with the same problem & prevent new postings which might not be relevant to the original posting. If anyone who happens to have a helpful discovery that could further enhance the thread to become more informative, please PM the moderator of the said forum.

Lost iTunes Library after upgrading to iTunes 7.7 HELP PLEASE

I have two issues on hand : after upgrading to iTunes 7.7 I opened iTunes and all of my music was gone except for about 1,000+ songs (3.2 GB) when I originally had about 20GB worth of songs. How can I recover my full library into iTunes ?
Second issue: when importing new CDs into iTunes 7.7 it only plays a fraction of each song before moving on to another song, whereas iTunes shows that I have the full song imported.
I really appreciate someone's help here, and does the latest version of iTunes have a bug ??

Further to my last post, I find that the purchased songs have been retained in the iTunes Library of my Mac Book - is there any way iI can restore them to the iMac?

MacBook Mac OS X 10.5.8 - won't upgrade to 10.6.8 - Help please!

I have a MacBook (specs below) and purchased the Apple Snow Leopard 10.6.8 CD from Apple, run the installation program, however About This Mac still says that it is running the old version 10.5.8
I have a new iPhone 4 and when I try to plug into iTunes, it tells me to update iTunes, and then when I go to do that it tells me the software is not up to date. This is how I know it hasn't upgraded.
So I restarted the computer and nothing, still says 10.5.8 Can anyone offer suggestions please? Thanks in advance
Model Name:
MacBook
Model Identifier:
MacBook4,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
2 GB
Bus Speed:
800 MHz
Boot ROM Version:
MB41.00C1.B00
SMC Version (system):
1.31f1
Serial Number (system):
WQ*****0P1
Hardware UUID:
79536CB5-36F2-5872-A0AE-5B0ACEDAD510
Sudden Motion Sensor:
State:
Enabled
<Edited by Host>

10.6 is a paid update via installation disc. Getting there requires you look at these steps:
https://discussions.apple.com/docs/DOC-2455
Once you get 10.6, you can update to 10.6.8 for the latest iTunes compatibility.
This will not give you full iCloud compatibility:
https://discussions.apple.com/docs/DOC-2551
However, you should be careful as far as updating to 10.7 or later, because of this:
https://discussions.apple.com/docs/DOC-6271

Verizon USB 720 - router help please!

Hope this isn't a repeat - I searched & couldn't find anything on my Modem.
I live in a rural area and use the Verizon USB 720 modem for my home PC. I just got a Dell laptop and want to connect it to the internet via my Verizon service. I heard I can do this with a Linksys router. Which one do I need, and what else is required? I don't want to pay $$$ & then find out it can't be done. Also, how far can I go with my laptop and still have an internet connection? Any help would be appreciated.

Yes. It is possible. Technically it is an access point you'll need. But you can use a router as well. Routers are usually cheaper but more limited then the versatile Linksys WAP... devices. If you want to use a router you should check this thread.
The other alternative could be to get a wireless adapter for your desktop and create an ad-hoc wireless connection between the desktop and the laptop. Basically, your desktop would then play access point. I cannot tell how good this works. I think it should work without problems but I have never tried it myself. Moreover, you may be limited to a single wireless connection, i.e. a single ad-hoc wireless connection from the desktop at each time (in case you want to get a second laptop in the future). But I am not sure on this either.

My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. Help please

My Iphone still won't charge even after I had tried plugging it in and waiting then restarting it, it still showed up on the screen that it has to be charged, even when it was in the USB port. I tried plugging it into the wall, a computer, I even switched out the USB cables but it still wouldn't charge. Help me please

Hello Isabellap,
It sounds like your iPhone 4S is not charging when plugged in. I found an article with some steps that might help with this. I recommend reviewing the steps in the sections titled "Battery does not charge from the USB power adapter" and "Will not turn on, will not turn on unless connected to power, or unexpected power off" in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

X6 USB Connection failure HELP PLEASE :(

Hi all i'm new here, i've just bought a Nokia X6 16GB, and upon plugging it into the pc via usb, the device has no response, I have tried all settings on the device, e.g. pc suite, and mass storage, and ask upon connection, but when plugging the cable into the phone it doesn't respond, e.g it does not show you usb menu, to select which way to connect to the pc.
And the pc doesn't respond either, only recognizing the phone, as an unknown device, I have tried all of nokia's software, inc the pc suite setup, I have tried uninstalling all the software, and reinstalling, with no luck, my pc is one I have built myself running win xp 64bit pro. I have tried 2 other pc's running win vista 32bit, and they won't even show the phone in device manager, like my pc.
So i'm basically wanting to know what is wrong with my phone?? Is it a problem with the handset, or usb cable, or the 3 computers I have tried?
I have only just recived the handset from orange, so I can return it if it is a problem with the handset..
Many thanks in advance, Ben.

Could be. Bring your X6 in and let them take a look.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I have a new macBook Pro 15 and need to purchase best, easiest usb for backup - help please

I have a new MacBook Pro 15" and need to purchase the easiest, cost-effective USB for backup. I have never done a backup and don't know what to buy. Thanks much from an obvious novice.

Look at these two links to OWC products. Note that one is for enclosures only so an appropriate HDD would have to be added. This at least should give you an idea of what is available.
http://eshop.macsales.com/shop/USB2/OWC_Express
http://eshop.macsales.com/shop/firewire/on-the-go
Ciao.

Hello, I have a Sony GV D300E mini DV editing deck.MY imac latest I7 model does not see it when I plug it in via firewire to usb, any help please.

My iMAC i7 will not see the device, it is from firewire to usb.
Any help please.

The connection on the player is firewire
You need the following:
Apple Thunderbolt - Firewire adapter
4-pin to 9-pin Firewire cable like this one
No software drivers are needed.
No icon will appear on your Mac desktop when the deck is connected. You need to use video capture software such as iMovie, Final Cut, etc. in order to "see" and use your Firewire deck. (I believe QuickTime Player will also "see" your deck and allow playback.) You will probably have to use the manual controls on the deck to control actual playback start & stop.
I have recently bought a cable,firewire one end and USB on the other
Hard to believe there is such a cable. If there is such a cable, it's a scam. Firewire and USB are totally different, electrically and protocol-wise. Even if there is such a cable, it will not work for connecting your miniDV player to a Mac. miniDV (video) has always been a Firewire-based connection. Sony calls Firewire "i.Link"

Can't Upgrade to USB 2.0. Help Please!

I have an K7T266 Pro Version 1.0 motherboard. Have been trying for hours to upgrade the USB port to 2.0. Have followed all instructions from the MSI website.
Even upgrqaded my BIOS to 1.9 and still can't get it to work. When I try to install the USB 2.0 driver, I get a message that says "Driver Can't Start". I have up-to-date windows XP Professional Version with Service Pack 1. According to MSI, I should be able to upgrade but it just doesn't happen.
I remember being able to upgrade to USB 2.0 when the same system was under Win 98 Second Edition but just has not worked with Win XP. This is very important as I bought an external hard drive to use for making backups under Norton Ghost.
Can anyone please help me with this? I am sure some other users out there have had the same problem.
Thank You in advance...

I have the same problems with this. THE KT6-Delta cd that came with my motherboard does not have the USB 2.0 drivers. It directs you to microsoft's website to install service pack one for XP or Win 2000. Then you can download an update from Microsoft for the USB 2.0. Is there any way to get around installing SP1? I currently only have access to dial up and that would take forever. Can someone give a link to some place that would have the drivers for USB 2.0?

HT4623 error 4013 and 21 on my ipad 2 after the new software upgrade. ipad is not usable anymore. please help!!!

Hello There,
please help, I have been trying to get my ipad to work again for hours without luck.
After running the new software update on my ipad 2, I started having issues; device turned off by itself, apps couldn't be downloaded, etc (however it was at least working).
Being frustrated with the newly born issues, I decided to restore the ipad, hoping that would solve the issue, however I ended up with the black screen telling me to connect to iTunes and when I connect and go for restore, I get error message 4013 and 21. I tried re-installing iTunes, upgrading my opp system, but nothing,
Please help!!! Very annoying!!!
Thx

You say "USB can't be the issue...". I disagree. There are thresholds, etc. Maybe the iPhone passes some threshold, but the iPad does not.
You might reboot all devices. If that does not cure it, then check the TS3694 article I attached above.

Mavericks Upgrade now computer constantly crashing..Help please?

I upgraded my IMac to Mavericks this week and computer constantly crashes since. I can only work in safe mode. I have been in contact with Apple and they have not been able to find the solution. I have seen others post their error log on here & am hoping someone can help me find the solution to resolve this? I have run disk repair & erased & reinstalled completely but nothing seems to be working. The computer sometimes crashes while just typing in the password to access the computer.
ANY HELP PLEASE?
Anonymous UUID:       C6C97F57-24D4-4F8E-A077-F179716F8834
Fri Mar 28 12:49:53 2014
panic(cpu 0 caller 0xffffff80024dbe2e): Kernel trap at 0xffffff7f834757ac, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000038250c8b4885, CR3: 0x0000000004ea1000, CR4: 0x00000000001606e0
RAX: 0x000038250c8b4865, RBX: 0xffffff8025becb80, RCX: 0x0000000000000000, RDX: 0x7fffffffffffffff
RSP: 0xffffff80f6143880, RBP: 0xffffff80f61438c0, RSI: 0x0000000000000050, RDI: 0xffffff80024f33c0
R8: 0x0000000000000070, R9: 0x0000000000000000, R10: 0x0000000000130070, R11: 0x0000000000070000
R12: 0xffffff80024f33c0, R13: 0x0000000000000023, R14: 0x0000000080000000, R15: 0x000000000000000a
RFL: 0x0000000000010286, RIP: 0xffffff7f834757ac, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000038250c8b4885, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f6143510 : 0xffffff8002422fa9
0xffffff80f6143590 : 0xffffff80024dbe2e
0xffffff80f6143760 : 0xffffff80024f3326
0xffffff80f6143780 : 0xffffff7f834757ac
0xffffff80f61438c0 : 0xffffff7f8347302e
0xffffff80f6143920 : 0xffffff7f8499b3a5
0xffffff80f6143990 : 0xffffff7f8347a0f2
0xffffff80f6143a10 : 0xffffff7f8347d1b9
0xffffff80f6143a90 : 0xffffff7f8347c640
0xffffff80f6143ae0 : 0xffffff7f8347bba5
0xffffff80f6143b20 : 0xffffff7f8347a7f6
0xffffff80f6143b60 : 0xffffff7f8346b676
0xffffff80f6143bb0 : 0xffffff7f83460dae
0xffffff80f6143c00 : 0xffffff7f83464ab4
0xffffff80f6143c50 : 0xffffff7f83463798
0xffffff80f6143da0 : 0xffffff7f83455dd6
0xffffff80f6143e30 : 0xffffff7f834548ed
0xffffff80f6143e70 : 0xffffff7f84662e07
0xffffff80f6143ed0 : 0xffffff7f834d8b0d
0xffffff80f6143f00 : 0xffffff7f834d684a
0xffffff80f6143f20 : 0xffffff800244a23a
0xffffff80f6143fb0 : 0xffffff80024d6ff7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOHIDFamily(2.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffffff 7f83450000->0xffffff7f834c1fff
            dependency: com.apple.driver.AppleFDEKeyStore(28.30)[2A8A5F6B-0A7C-33A0-8E5B-4C10F646EC4F]@ 0xffffff7f83445000
         com.apple.iokit.IOUSBHIDDriver(660.4)[3838C4F6-C8E3-32A3-B42E-14CE8048A506]@0xf fffff7f834d5000->0xffffff7f834ddfff
            dependency: com.apple.iokit.IOHIDFamily(2.0.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffff ff7f83450000
            dependency: com.apple.iokit.IOUSBFamily(675.4.0)[5C861553-BC5A-3979-A6B4-58C57879DD40]@0xff ffff7f8337a000
         com.apple.driver.AppleUSBHIDKeyboard(170.15)[6A860CCA-499B-3B05-8D22-D41FA398E3 EC]@0xffffff7f84662000->0xffffff7f84665fff
            dependency: com.apple.iokit.IOHIDFamily(2.0.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffff ff7f83450000
            dependency: com.apple.driver.AppleHIDKeyboard(170.15)[C686264B-E276-3B9C-8044-FC64E7F665C1] @0xffffff7f84238000
            dependency: com.apple.iokit.IOUSBHIDDriver(660.4.0)[3838C4F6-C8E3-32A3-B42E-14CE8048A506]@0 xffffff7f834d5000
         com.spsys.driver.EIOKitDriver(1.0.1)[00000000-0000-0000-0000-000000000000]@0xff ffff7f8499a000->0xffffff7f8499dfff
            dependency: com.apple.iokit.IOHIDFamily(2.0.0)[5D59740C-447F-37DA-B881-6F470878CF56]@0xffff ff7f83450000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000002200000
Kernel text base: 0xffffff8002400000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 259144459246
last loaded kext at 254540245135: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f8499e000, size 65536)
last unloaded kext at 212515400795: com.apple.driver.AppleFileSystemDriver          3.0.1 (addr 0xffffff7f84714000, size 8192)
loaded kexts:
com.spsys.driver.EIOKitDriver          1.0.1
com.spsys.driver.ENKEDriver          1
com.logmein.driver.LogMeInSoundDriver          1.0.3
com.apple.filesystems.msdosfs          1.9
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AGPM          100.14.15
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleThunderboltIP          1.1.2
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.GeForce          8.2.4
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleIntelHD5000Graphics          8.2.4
com.apple.driver.AppleIntelFramebufferAzul          8.2.4
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.AppleUSBHub          666.4.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AppleSDXC          1.5.2
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AirPort.Brcm4360          831.21.63
com.apple.driver.AppleUSBXHCI          670.4.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.AppleThunderboltEDMSink          2.1.3
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleSMC          3.1.8
com.apple.iokit.IOAcceleratorFamily          98.14
com.apple.nvidia.driver.NVDAGK100Hal          8.2.4
com.apple.nvidia.driver.NVDAResman          8.2.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOSurface          91
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.iokit.IOAcceleratorFamily2          98.14
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.AppleUSBHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.driver.AppleThunderboltNHI          2.0.1
com.apple.iokit.IOThunderboltFamily          3.2.7
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.iokit.IO80211Family          630.35
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i5, 3.2 GHz, 8 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GT 755M, NVIDIA GeForce GT 755M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453220
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.63)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 0 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: APPLE HDD ST1000DM003, 1 TB
USB Device: FaceTime HD Camera (Built-in)
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Keyboard Hub
USB Device: Apple Keyboard
Thunderbolt Bus: iMac, Apple Inc., 23.10

It seems everyone found that was the issue all at once. I unstalled it and no more crashes! Problem Solved.
Thank you for responding

Broken Bonjour with Canon MF4350d after 10.6 upgrade - Help Please.

I have been using a Canon 4350d with no problems with 10.5.8 - including Printer Sharing (Bonjour). Now, after updating to 10.6 (now 10.6.2) I can still print fine, but I have lost all Printer Sharing. All settings appear to be right, and my other macs appear to be printing through the one connected via USB to the printer, but it never goes through. HELP Please. Thank you.

According to the UFR2 User Guide on page 2-8, the driver can be removed from the Mac by trashing the following folders. Note that you should delete the print queue first, by opening Print & Fax, selecting the MF model in the Printers list and pressing the minus button.
System Volume > Library > Printers > Canon > UFR2
System Volume > Library > Launch Agents > jp.co.canon.UFR2.BG.plist
System Volume > Library > Printers > PPDs > Contents > Resources > en.lproj > CNTD**Z*2.ppd.gz
(where * indicates the printer model and 2 indicates the language of driver used)
With these files removed you can then empty the trash, although you may have to open Activity Monitor and stop the 'UFR II Backgrounder' service before you are able to remove all the files from the trash.
With the v2.10 driver removed you are ready to add another driver. However you need to be aware that the v1.80 driver cannot be used on 10.6. If you were using it previously then it would suggest that the 10.6 Mac was an upgrade from 10.5 rather than a clean 10.6 install. On a clean 10.6 Mac, then v1.80 driver will not operate correctly.
What you may be able to do is have the v1.80 driver installed on a Mac running Leopard and shared. You may then be able to use the v2.10 driver on the Snow Leopard Mac's to print to the Leopard share using the v1.80 driver. Note that I haven't tried this so I cannot say if this will work for you. Personally I always ensure I get a printer with Ethernet or wireless support so that I can avoid printer sharing...

"Upgrade to USB 2.0" Help Please

Similar Messages

Maybe you are looking for