Upgrade to windows 10, display driver not work

the issue is video card has no working driver detect. I can't get error code ,because teh screen is not display any thing.I am sure the computer is boot up, as it can be access by teamviewer  and show a 640x480 screen. currently , I am using miscrosoft default display driver .   instead of intel and AMD driver. to show  1024x168 screen , at least I can see someting now...  and the fan is screaming .. my product type is   HP Pavilion dv4-3126tx      QG429PA#AB2 display card is       Intel HD Graphics 3000  and   AMD radeon 6600m and 6800m (not sure excatly, may be 6750M) I am running windows 10 64bit    much thanks

all solution  I have tried  , but not work not working driver include -  the windows update give a driver  from  2015 july 15  -  Radeon (TM) HD 6750M    ver   9.0.0.0      2012/8/15  -  AMD Radeon 6600M and 6700M  series   ver 15.200.1046.2    2015/7/15-  AMD  12.10   DriverVer=09/27/2012, 9.002.0.0000-  AMD  15.6   DriverVer=06/19/2015, 14.502.1014.1001-  AMD  15.7    DriverVer=07/15/2015, 15.200.1062.1002-  intel(R) HD Graphics 3000   ver: 9.17.10.4101     2015/1/30-  intel(R) HD Graphics 3000   ver: 9.17.10.4229     2015/5/26-  intel(R) HD Graphics 3000   ver: 9.17.10.4229     2015/5/27  do I need to install both intel graphic deriver seperatly ?   the old win7 and win8 driver tell me , not install intel graphic driver ,  I must instal  AMD driver which include intel already.......  

Similar Messages

  • LaserJet 1020 Windows 7 x64 driver not working!

    Hello. I have problem. I have recently installed Windows 7 x64, and when I tried to install driver for my LaserJet 1020 from this site, an error appeared.
    First, when I launched the driver installer, I agreed with license agreement and proceeded. Than, loading bar appeared, it came to 3 division sticks in it and text above was like "Preinstalling the driver files". Then, suddenly, for a split-second "Copying files to the hard drive." text appeared, than again "Preinstalling the driver...", and it appeared again for less than a second, and again, and again... Than, after a few times, it just crushed, with Windows message "Printer Software Installer" is not working". 
    And one more: in Program Files -> HP folder there are lots of driver files (which seem not to be working) and another HP folder with same file and HP folder in it... Recursion of some kind, I think.
    So, what should I do? I can't use my printer for a long time because of this driver!
    I'm haven't spoken English for a while, so, if I explained something strange, ask, I'll try to explain better =)
    This question was solved.
    View Solution.

    Who is awesome? I'm awesome! ^_^ 
    I used russian version of the driver, worked flawlessly =) 
    Take it from here. Glad, if I could help =)
    http://ftp.hp.com/pub/softlib/software11/COL22237/bi-58689-4/lj1020_1022-HB-pnp-win64-ru.exe

  • Notebook dv8285ea with Windows 7: Sound driver not working

    On my Notebook dv8285ea (bought in 2006), that came with Windows XP, I have mounted a new SSD drive and installed Windows 7 Prof (32 bit).  -  It works fine except for one problem: There is no sound from the speakers. I get error messages such as "No Audio Output Device installed". That is: The Sound part of the motherboard is not compatible with the Windows 7 sound driver.
    Can anyone point to a solution?  -  The dv8285 is not among the notebooks that HP has provided Win7 drivers for.
    This question was solved.
    View Solution.

    See if this site works for you:
    http://laptop-driver.blogspot.com/2009/12/installing-conexant-cx20468-31-ac97.html
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Latest display driver not working on Satellite A660-11M

    Hi all,
    I'm trying to install the latest display driver downloaded from toshiba drivers section.
    When i have downloaded them i started the installation but it doesn't run. I have tryed to instal "as administrator" i have tryed to install without the user account control but nothing to do.
    I have tryed to install lauching every single file like "tinstallwb" "tinstall" and "setup.exe". The last one says that it can't recognize the hardware.
    I have alway installed toshiba driver only. I have windows 764 bit home premium.
    P.S.
    I have already installed the new version of the bios(1.8)
    Could anyone help me?
    (sorry for my english but i'm italian)

    I Installed yesterday latest drivers from Nvidia official page, and they work perfectly on the A660-11M, brightness and all controls, and now the Mercury Hardware engine in Adobe Premiere CS5 is working perfect!!! .. .version 260.99 released yesterday:
    http://www.nvidia.com/object/notebook-win7-winvista-64bit-260.99-whql-driver.html
    RELEASE HIGHLIGHTS :
    This is the second WHQL release from the Release 260 family of drivers. You can read about the major new features and performance improvements in the Release 260 family of drivers here.
    This driver supports the following NVIDIA notebook GPUs (please refer to the Products Supported tab for exceptions):
    ION notebook GPUs.
    GeForce 8M, 9M, 100M, 200M, 300M-series, and 400M notebook GPUs.
    Quadro 5000M
    Quadro NVS-series notebook GPUs (only those that support DirectX 10 or higher).
    Quadro FX-series notebook GPUs (only those that support DirectX 10 or higher).
    New in Release 260.99
    Increases performance vs. v260.89 drivers in the following PC games: Civilization V (SLI), Fallout 3, Final Fantasy XIV, and Formula 1 Racing (DX11).
    Adds SLI profiles for the following PC games:
    Need for Speed: Hot Pursuit
    Star Wars: The Force Unleashed II
    Fallout: New Vegas
    Improves compatibility for Fallout 3: New Vegas with antialiasing enabled.
    Improves Alt-Tab compatibility for several PC games.
    Additional Information
    Installs HD Audio driver to version 1.1.9.0.
    Includes PhysX System Software to version 9.10.0514.
    Supports the new GPU-accelerated features in Adobe CS5.
    Supports GPU-acceleration for smoother online HD videos with Adobe Flash 10.1. Learn more here.
    Supports the new version of MotionDSP's video enhancement software, vReveal, which adds support for HD output. NVIDIA customers can download a free version of vReveal that supports up to SD output here.
    Supports DirectCompute with Windows 7 and GeForce 8-series and later GPUs.
    Supports OpenCL 1.0 (Open Computing Language) for all GeForce 8-series and later GPUs.
    Supports OpenGL 3.3 for GeForce 8-series and later GPUs.
    Supports OpenGL 4.1 for GeForce 400 series GPUs.
    Supports single GPU and NVIDIA SLI technology on DirectX 9, DirectX 10, DirectX 11, and OpenGL, including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards.
    Supports GPU overclocking and temperature monitoring by installing NVIDIA System Tools software.
    Users without US English operating systems can select their language and download the International driver here.

  • GTX 460 display driver not working in AE CS6

    Hi everyone im currently having problems with After Effects, My GTX 460 is currently undetected by AE CS6 when i check out the gpu information it says (GPU not available - incompatible device or display driver)
    I don't see how i am getting this problem as i have the latest drivers and the the gtx 460 has 336 cuda cores therefore it should be compatible with After Effects Should it not ???
    Any help will be much appreciated unless it has to do with drivers, believe me it's not the drivers -.-

    Same old, same old: What's not listed on the product pages is not officially supported for the respective features and the GTX 460 is not listed as supporting Raytrace 3D. It should support all conventional OpenGL stuff and fast previews without issues, though, so update your graphics driver or try a different version and configure it properly so AE can detect it.
    Mylenium

  • Upgraded to Windows 10 - Now Roboform not working in Firefox

    This was on their support page. 
    There are also some workarounds mentioned here.
    Also, Roboform makes no statement that they support Windows 10 yet.

    I did the free upgrade from Windows 7 to Windows 10 on my home computer.
    I use Firefox and RoboForm (form filler, password keeper, etc.). The RoboForm toolbar is there but it has a little red X int he lower left corner on the icon which you click to access the settings.
    If I click on it and choose Options and User Data I can see the location of my data file. However, it's as though the program can't access it.
    I have tried moving the file, resetting things, etc. but only get error messages or "RoboForm User Data is not Defined." Won't let me create a new account. Nothing.
    This has been a three hour frustration for me. Everything was fine before the upgrade.
    This topic first appeared in the Spiceworks Community

  • Sat Pro A60: ati2dvag display driver not working properly

    help.... i know very little about computer and need to know what, how and where i can get a solution to this problem. It occurs more and more frequently now, it messes up the display and i have to restart only for it to happen again. i tried to down load bios 1.90 and will hope it works like some similar ports have said but what else can i do? any help from anyone would be so great
    [Edited by: admin on 19-Aug-05 23:28]

    Hi
    Well, you can try to recover your system. If the problem remains so the best way is to contact the Toshiba ASP. You can find the right service partner on this site:
    http://eu.computers.toshiba-europe.com
    Bye

  • Disk Drive not working and could not inter Hkey_Local_Machine

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

    I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Window 10 upgrade. Graphics driver not working even after re-install

    Notebook pavilion DV6 3280.  Just upgraded to Windows 10 and AMD graphics driver not working even after re-install.  What do I do?  Is there another driver not on the HP Website that I should try?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

    Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV] 
    When I connect the phone he load and then says no connect

    Hi,
    Please try the following driver for "MediaTek (Ralink) Bluetooth":
        http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows media player will not work as no DVD driver

    Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

    Hi
    Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
    To watch DVD movies you can use the programs like WinDVD or PowerDVD.
    Such programs were designed especially for the DVD playing!
    But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
    Then you could download and install it to play DVD with WMP
    Best regards

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Installed Premiere Pro CS4 but video display does not work?

    I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
    1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
    2) the UI is way too slow for my big beefy system.
    My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
    Any ideas how to solve this CS4 install issue?
    Ron

    I would like to thank Dan, Hunt, and Haram:
    The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
    My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
    My PC is brand new with the following "beefy" components:
    Motherboard
    nForce 790i SLI FTW
    Features:
    3x PCI Express x16 graphics support
    PCI Express 2.0
    NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
    DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
    Overclocking tools
    NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
    ESA Certified
    NVIDIA DualNet and FirstPacket Ethernet technology
    Registered
    CPU: Intel Core 2 Quad Q9550
    S-Spec: SLAWQ
    Ver: E36105-001
    Product Code: BX80569Q9550
    Made in Malaysia
    Pack Date: 09/04/08
    Features:
    Freq.: 2.83 GHz
    L2 Cache: 12 MHz Cache
    FSB: 1333 MHz (MT/s)
    Core: 45nm
    Code named: Yorkfield
    Power:95W
    Socket: LGA775
    Cooling: Liquid Cooled
    NVIDIAGeForce GTX 280 SC graphics card
    Features:
    1 GB of onboard memory
    Full Microsoft DirectX 10
    NVIDIA 2-way and 3-way SLI Ready
    NVIDIA PureVideo HD technology
    NVIDIA PhysX Ready
    NVIDI CUDA technology
    PCI Express 2.0 support
    Dual-link HDCP
    OpenGL 2.1 Capaple
    Output: DVI (2 dual-link), HDTV
    Western Digital
    2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
    Features:
    10,000 RPM, 3 Gb/sec transfer rate
    RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
    p/n: TW3X4G1333C9DHX G
    product: CM3X2048-1333C9DHX
    Features:
    XMS3 DHX Dual-Path 'heat xchange'
    2048 x 2 MB
    1333 MHz
    Latency 9-9-9-24-2T
    1.6V ver3.2

  • Audigy Platinum Ex Windows 7 SPDIF IN not working

    Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
    In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
    If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

    Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
    Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
    What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Maybe you are looking for