Upgrade tool for technical upgrade of portal

Hi,
For upgrading SAP Enterprise Portal 6.0 SP 2 to the latest version of Enterprise Portal (7.0 or 7.1), is there any upgrade tool from SAP that can be used?
An early response would be greatly appreciated.
Thanks.

Hi,
Check SAP note 1245473 and 1175848...
Thanks
sunny

Similar Messages

Need R12 upgrade documens for technical development prospective

Looking for 11i to R12 upgrade documens for technical development prospective

Looking for 11i to R12 upgrade documens for technical development prospectivePlease also see these docs.
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
R12: How to Compile a Form in Release 12 [ID 1085928.1]
How To Bring Up 10G Forms Builder In R12 Environment? [ID 579318.1]
Running EBS R12 Oracle Reports From The OS Command Line [ID 1134993.1]
Upgrading your Customizations to Oracle E-Business Suite Release 12.1 -- White Paper [ID 1435894.1]
Preparing Custom Development for Next Oracle E-Business Suite Release [ID 374398.1]
Customizing Translation in Oracle E-Business Suite - R12 [ID 1382124.1]
Thanks,
Hussein

Config. comparision for technical upgrade

Hi ,
We are upgrading from 4.6c to ECC 6.0 ,this is a technical upgrade .
Do we need to compare the config. of 4.6c to ecc 6.0 ?
If yes then how do we go about it ?

Dear kedar landge,
Hope this helps you.
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Windows 8 free upgrade tool for model VPCF226FM

Hi everyone I used before to download the free upgrade tool from support website, where it helped me to uninstall incompitable drivers/tools/utilities and re-install them later after upgrading to Windows 8 I am not able to find that tool anymore and downloading/installing drivers one by one is not working fine. I have removed power management & Vaio control center and re-installed more than dozen time and still have same issue as unable to use FN keys to control brightness

Hi athensguy,
Thank you for considering Sony Community!
I am not sure what specific application you used before but all drivers and software that is compatible with your machine are listed on eSupport website. If you are refereeing to the upgrade from Windows 7 to Windows 8, please visit this link: Windows® 8 Upgrade Instructions for VAIO® PCs
If your main issue is the function key (Fn), you may follow these steps to troubleshoot the laptop.
Power Cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds
Reset BIOS.
Got o Device Manager -> Keyboards -> right click Keyboard driver -> Uninstall (DO NOT DELETE) -> restart the laptop. The driver will be reinstalled.
Download or update all the drivers from eSupport website.
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Thanks,
If my post answers your question, please mark it as "Accept as Solution"

SUM tool for EHP6 upgrade

Dear
We are planing to upgrade ehp4 to ehp6 through ehp6
what are the pre requisite for the same
like file system space how much it will take we are going to choose stand alone mode instead of shadow
what is down time difference for same
Regards

Hi Rajendra,
please find all the necessary guides (e.g. upgrade guide, media list...) as follows:
>> http://service.sap.com/instguides
>> SAP Business Suite Applications (on the left sidebar)
   >> SAP ERP
      >> SAP ERP 6.0
The guides provide you all the required information you need to upgrade your system.
The Master Guide - SAP enhancement package 6 for SAP ERP 6.0 provides important information about the installation sequence and the components to be installed. It also links to all other documents that are required for the implementation of a specific scenario.
The standard tool to install SAP ERP Enhancement Package 6 on top of SAP ERP 6.0 as well as upgrading a previous release to SAP ERP 6.0 EHP6 is the Software Update Manager. Software Update Manager (SUM) replaces SAPehpi as well as SAPup.
Maintenance Optimizer offers the download of the required Software Update Manager for implementing the Enhancement Package. You find details in SAP Note #1626435.
You can download the relevant packages from SAP Service Marketplace as below or order the relevant DVDs while opening at ticket at component XX-SER-SWFL-SHIP:
>> "http://service.sap.com/swdc"
>> "Installations and Upgrades" (on the left sidebar)
   >> "Browse our Download Catalog"
      >> "SAP ERP"
         >> "SAP ERP ENHANCE PACKAGE"
            >> "EHP6 FOR SAP ERP 6.0"
Further information can also be found at http://service.sap.com/upgrade.
This is the Single Point of Access for All Upgrade-Related Information. Here you'll find all about Tools, Phases-Information and Services.
Please also check http://service.sap.com/erp.
Cheers,
Andreas

Recommended tool for technical illustrations to be embedded in FrameMaker document?

I'm new to Framemaker and don't know, if this is the right tool for me.
I have written a technical document of about 500 pages using MS-Word. Now I want to figure out, if FrameMaker would be a good alternative. I think it could be.
But one of my needs is to be able to create technical illustrations (diagrams with shapes with text and arrows, lines and arrows linked to the shapes when repositioned).
In my opinion the capabilities of FrameMaker to create such illustrations are very limited.
Currently I create the illustrations using MS-Word-2010. I think concerning illustrations MS-Word is more capable than FrameMaker.
On the other hand the capabilities of Adobe Illustrator are plenty too much for me.
Can you recommend some external tool for creating illustrations, which can be easily integrated into a FrameMaker document?
Regards,
Martin

Import the ai file directly into the FrameMaker doc.
Select where you want the illustration to be located (use the smart select tool and click on the area in your text flow)
File>Import>File
If you want to have the illustration in the document to automatically update when the drawing changes, select Import By Reference.
Once imported you have the option of positioning where you want it to be located relative to the text.
Right click the anchored frame, select Anchored Frame
Select the Anchoring Position, Alignment, etc.
Adobe Illustrator is all you need to create quality Technical Illustrations.
http://tekarttechnicalillustration.blogspot.com/2011_08_01_archive.html
http://tekarttechnicalillustration.blogspot.com/2011/07/glassware.html
http://tekarttechnicalillustration.blogspot.com/2011/05/line-illustration.html
For premade elements get familiar with your symbols libraries.

File overwritten by upgrade tool EHPI during upgrade configuration step

Hello,
During upgrade using EHPI the upgrade pauses with an error that says to replace R3trans with a newer version into the EHPI/abap/exenew directory. After copying the file and continuing with the upgrade it pauses again with the same error.
I see in the log that after continuing that the upgrade kernel file is unpacked again and thus overwites the new R3trans file with an older version.
My solution has been to restart the upgrade and simultaneously copy the file multiple times with the cp command so that a new R3trans is in exenew directory after the extraction and before the check.
I know similar errors have occurrd in previous upgrades, migrations etc.
Regards,
Robert

You could always copy the new files over to exenew ahead of time right at the start of the upgrade.
exenew is not looked at until the new exes are copied
Pravin

Tools for SQL upgrade

Hi Team,
Are you aware of any tool(MS or third party) which can be used for upgrading SQL 2005 to 2012 side by side.Something which can help migrate at an instance level i.e move databases, copy logins,jobs etc.Manual backup and restore process is
very tedious and also time consuming specifically in case of upgrades in higher numbers.
Thanks

Hello,
Try the following tools:
http://www.apexsql.com/sql_tools_diff.aspx
http://www.red-gate.com/products/sql-development/sql-data-compare/
http://www.activedbsoft.com/overview-migrate.html
Hope this help.
Regards,
Alberto Morillo
SQLCoffee.com

Trouble doing a database upgrade test for SCCM upgrade from SP1 to SP2

I'm trying to do this test and am having trouble. I'm following the instructions in
http://technet.microsoft.com/en-us/library/bb693648.aspx. However when I enter the command at a command prompt: setup /testdbupgrade e:\database test\sms_hlb_new I get the message: The setup command line option is not valid on this computer.
Any help anyone can provide to get around this problem would be appreciated. I'm not a SQL admin and haven't done an SCCM upgrade before so any tips for a newbie would be great. Thanks!

The procedures are basically the same. You can even attach a copy of the database where ConfigMgr is runnig on (be careful to not /testupgrade the wrong one then). You cannot provide a command line parameter to point to a remote SQL server, but you can
start setup.exe on any machine (so local to the SQL where the copy of the DP is)Torsten Meringer | http://www.mssccmfaq.de

Technical Upgrade from XI 3.0 to PI 7.1

Hi,
My client is going for Technical Upgrade from XI 3.0 to PI 7.1 not fresh installation. They are asking for How best we can achieve this. I have gone through Decision making document and upgrade document from SAP. Apart from which please provide me the valuable Inputs like what measures we need to take care before and after upgrade as an XI developer. In our project about 90% of interfaces are having java mapping. will there be any changes to be done after upgrade.
I already gone through below link
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8085e299-718c-2a10-de94-928f62b763ce
https://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655&overridelayout=true
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40a0868a-9d40-2b10-8cb4-8e0c53b56655
Thanks in advance
Venkatesh

you can use this document as your base - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8085e299-718c-2a10-de94-928f62b763ce?quicklink=index&overridelayout=true
do an upgrade from XI 3.0 to PI 7.1
java mappings will still continue to work.
But you might have to modify some graphical mapping, java proxies and modules if any

Technical upgrade from 4.6C MDMP system to ECC 6.0 using CU & UC approach

Hi SAP Experts,
We are embarking on a project for Technical upgrade from SAP R/3 4.6C MDMP system to ECC 6.0 using the CU & UC approach for our Asian operations (comprising of India, Japan, Taiwan & Singapore).
Please share with me the Best Practices you followed in your projects, checklists, DOs, DONTs, typical problems you encountered and the possible safeguards, any other useful information, etc.
Since very little information is available from Organizations who have used the CU & UC upgrade approach successfully, I am raising this in SDN to share your experiences during the Technical upgrade.
All useful information will be surely awarded with suitable points.
Looking for your invaluable inputs which will be a BIG help for our project.
Best regards,
Rajaram

Hello Rajaram!:
It's a very big project, that you have to do in a lot of steps........
If you want sent me a email with the problems and you want.
Regards,
Alfredo.

UCCX 5.0 - 8.0 using pre-upgrade tool

Hi,
We're upgrading from 5.0(2) to 8.0. We've used the Pre-Upgrade Tool to create a TAR file on the production UCCX. From the replacement server we've selected "Upgrade from a previous UCCX release". The Pre-Upgrade Tool ran without issue and the log file shows no errors.
The status message shows: "Enter a valid backup file"
We know the sftp server is setup correctly and the user credentials are correct.
Any feedback welcome.Many thanks.

The Pre-Upgrade Tool also have the option to verify the backup file. Try running the verification and see if it works:
(page 16 - Upgrade guide)
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/uccx801ig.pdf
Also what are the exact UCCX versions 5.0(2) SR? and going to 8.0(1) or 8.0(2)? there is one upgrade tool for 8.0(1) and another for 8.0(2), make sure you are running the right one.
Pablo

Upgrade Tool - LWAPP

We are upgrading 800 APs to lightweight. I know the upgrade tool can only upgrade 6 APs at a time. Can I run the Upgrade tool on two different computers at the same time so that I can upgrade more than 6?

First,
On each controler, make sure your AP will fit in the local database (AAA/General)
After that, Make one of the Controler Master Controler. This will be the controler you give to the AP with DHCP.
Start Converting AP... You need to make room on the Master Controler from time to time and send APs to their primary controler. Before sending APs to their primary controler, distribute the .csv generated by the upgrade tool to all the controler.

Pro Tool Studio LE 7 upgrade... anyone knows where I can buy the upgrade version for this? and how much does it cost?

I have a Mac Pro 2006 running on leopard and I need to upgrade my Pro Tool Studio LE 7 to 8 so it can work on Leopard.. anyone knows where I can buy the upgrade version for this? and how much does it cost?

Upgrade to Pro Tools Studio LE 8: - http://shop.avid.com/store/product.do?product=288865113879120
But it would be worth searching through the Updates to see if there is an update for Leopard, which it looks like there is: - http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=355241

After installed iPhoto upgrader tool, photos software is still asking for IPhoto needs to be update, why?

MAC OSX :- 10.10.3
IPHOTO :- 9.6
I have recently updated my os x 10.10.2 to 10.10.3 and found iPhoto software dose'nt work. there is some other application appears called photos like iPhone,when i am trying to open it, asking to marge iPhoto library. so tried to marge but it is asking to upgrade iPhoto through a iPhoto Library Upgrader tool. i have installed that but problem is still there - needs to upgrade your iPhoto library. why?

You need to upgrade the application not the Library. 10.10.3 requires v9.6.1
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Upgrade tool for technical upgrade of portal

Similar Messages

Maybe you are looking for