Upgrade Tool - LWAPP

We are upgrading 800 APs to lightweight. I know the upgrade tool can only upgrade 6 APs at a time. Can I run the Upgrade tool on two different computers at the same time so that I can upgrade more than 6?

First,
On each controler, make sure your AP will fit in the local database (AAA/General)
After that, Make one of the Controler Master Controler. This will be the controler you give to the AP with DHCP.
Start Converting AP... You need to make room on the Master Controler from time to time and send APs to their primary controler. Before sending APs to their primary controler, distribute the .csv generated by the upgrade tool to all the controler.

Similar Messages

  • AP-to-LWAPP-Upgrade-Tool won't install

    I have downloaded 3 versions, 3.0, 3.2 and 3.4.... all of them hang after extracting the files and launching setup.exe....
    I have tried on several different Win XP machines... same result
    Don't know if it matters at this point, but the intended WAP is an AIR-AP1252G-A-K9...
    any ideas?

    You can't use the tool for that:
    Here is direction from a member on this forum:
    It took me a while to get this information, so thought I'd share. Here it is:
    You cannot use the upgrade tool to do the IOS to LWAPP for the 1250 APs.
    Here is a method to do the conversion.
    *Method 1 : ( Mode Button )*
    1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
    2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
    3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
    http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
    4. Rename c1250-rcvk9w8-tar.124-10b.JA3 to c1250-rcvk9w8-tar.default
    5. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
    6. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
    7. Hold the mode button and power off the AP.
    8. Power back the AP while continually holding the mode button for 20-30
    seconds.
    *Method 2 : ( Archive Command )*
    1. Install an external TFTP tool such as tftpd32 tool from http://tftpd32.jounin.net/
    2. Assign IP address in the range 10.0.0.2 - .254 ( Ex : 10.0.0.3) to the tftp server (your laptop or pc).
    3. Download the IOS to lwapp image onto the tftp's root directory. Use http://www.cisco.com or
    http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&image=c1250-rcvk9w8-tar.124-10b.JA3&filepath=/swc/esd/02/crypto/3DES/281235915/guest&filename=c1250-rcvk9w8-tar.124-10b.JA3&advUrl=null&isk=Y&defInd=N&mdfid=281235915&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&relVer=12.4(10b)JA3&fileId=271159&treeMdfId=278875243&treeName=Wireless
    4. Make sure you set the IP address on the BVI interface of the AP if not set. Set it in the 10.0.0.x range. Default is 10.0.0.1.
    5. Connect the Ethernet port on AP to your TFTP Server ( Laptop )
    6. On AP, type archive download-sw /overwrite /force-reload tftp:///c1250-rcvk9w8-tar.124-10b.JA3
    Going the other way (lwapp to autonomous)
    http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
    If you need to manually "prime" the LWAPP:
    AP#lwapp ap ip address
    AP#lwapp ap ip default-gateway
    AP#lwapp ap controller ip address
    AP#lwapp ap hostname
    (optional)
    Hope someone finds this useful!

  • Autonomous - LWAPP Upgrade Tool & Vista

    I tried to install the v. 3.4 upgrade tool on Vista Business 64 bit. The installation fails with a pop-up titled "Severe" with error "Error in opening iput file."
    The real problem I'm having is that I can't uninstall the failed installation. It shows up in the installed programs list, but upon uninstalling pops up with "Setup Initialization Error" "Setup is unable to find _SETUP.DLL, which is needed to complete the installation. Error 103."
    Any advice on how I can excise this thing out of my system?

    Unfortunately that didn't do the trick. I did look at the uninstall.bat file and tried running the isuninst command manually with the same options and compatibility mode, but it just immediately exists without doing anything.

  • Blocking TFTP in upgrade tool

    I am running the upgrade tool to download the LWAP image, I have the AP enabled both the telnet and ssh, but the upgrade tool still complained
    - AP 192.168.0.10
    1. ACL/Firewall might be blocking the TFTP
    2. Diable the ACL/Firewall setting for TFTP.
    Is it mean the AP is blocking? I checked the telnet and SSH is enabled
    Another quesiton is the AP 1230B-A-K9 after the upgrade tool completed , the detailed log file display error "AP does not supported radio". However, I have another AP with the same model which successfullly deployed in this network.
    I am really appreciated that.

    To be able to convert the units from IOS to LWAPP we need to make sure that your units has a supported radio either the
    –if 802.11G, MP21G and MP31G are supported
    –if 802.11A, RM21A and RM22A are supported
    if your unit has another radio it will not be supported.
    You mention that the unit gives the error message of "AP does not supported radio" and you have a
    1230B-A-K9 which only has a B radio that is not supported in LWAPP.
    http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html
    In order to confirm this use the show controllers to check the model of radio your unit has.

  • Cannot upgrade an AP1242 to LWAP using the upgrade tool 3.4

    I have installed the tool on an XP laptop.
    If I configure the tool to use an external tftp server then I get upgrade failed.
    "Unable to Load  the LWAPP Recovery Image on to the AP"
    If I use the built in tftp server I get a msgbox with "C:\Program Files\Cisco Systems\Upgrade Tool\images\c1240-rcvk9w8-tar.123-11JX1.tar - LWAPP Recovery Image is not a valid one".
    This is the log output
    2011/03/15 15:52:57 DEBUG   10.10.10.5   Validating IP address
    2011/03/15 15:52:57 DEBUG   10.10.10.5   Opening a telnet connection to the AP
    2011/03/15 15:53:00 INFO   10.10.10.5   User  has  Full privilege
    2011/03/15 15:53:00 INFO   10.10.10.5   Getting  AP Name
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Verify if APs image is 12.3(07)JA or greater
    2011/03/15 15:53:00 INFO   10.10.10.5   AP  has 12.3(7)JA Image or greater
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Identifying the AP Type
    2011/03/15 15:53:00 INFO   10.10.10.5   Term Length configured.
    2011/03/15 15:53:00 INFO   10.10.10.5   Upgrade Tool supported AP
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Check whether AP has supported Radio
    2011/03/15 15:53:01 INFO   10.10.10.5   AP has two radios
    2011/03/15 15:53:01 DEBUG   10.10.10.5   AP has Supported Radio
    2011/03/15 15:53:01 INFO   10.10.10.5   AP has Supported Radio
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Verifying Station Role
    2011/03/15 15:53:01 INFO   10.10.10.5   Station role is  Root AP
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Check whether AP has  MIC Certificate
    2011/03/15 15:53:01 INFO   10.10.10.5   MIC is already configured in the AP
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Getting Ethernet MAC address
    2011/03/15 15:53:01 INFO   10.10.10.5     Hardware is PowerPCElvis Ethernet, address is 001f.ca28.973a (bia 001f.ca28.973a) 
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Getting the Radio Status
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Entering Configuration mode
    2011/03/15 15:53:02 INFO   10.10.10.5   Inside Shutdown function
    2011/03/15 15:53:04 INFO   10.10.10.5   Shutdown the Dot11Radio1
    2011/03/15 15:53:06 INFO   10.10.10.5   Shutdown the Dot11Radio0
    2011/03/15 15:53:06 DEBUG   10.10.10.5   Getting Current System Time
    2011/03/15 15:53:07 INFO   10.10.10.5   Updating the AP with Current System Time
    2011/03/15 15:53:07 DEBUG   10.10.10.5   Entering Configuration mode
    2011/03/15 15:53:07 DEBUG   10.10.10.5   Executing show run
    2011/03/15 15:53:08 INFO   10.10.10.5   Saving the configuration into memory
    2011/03/15 15:53:08 INFO   10.10.10.5   Getting  AP Name
    2011/03/15 15:53:08 DEBUG   10.10.10.5   Loading the LWAPP Recovery Image on to the AP
    2011/03/15 15:53:09 DEBUG   10.10.10.5   Checking the Upload Status
    2011/03/15 15:53:11 ERROR   10.10.10.5   Unable to Load  the LWAPP Recovery Image on to the AP
    2011/03/15 15:53:18 INFO   10.10.10.5   Dot11Radio0 is up now
    2011/03/15 15:53:18 DEBUG   10.18.227.10   Opening a telnet connection to the Controller
    2011/03/15 15:53:19 DEBUG   10.18.227.10   Telnet connection to the Controller opened
    I see from other posts that JX image is required but it is not working for me. Can anyone help?

    If I try to extract the tar file direct to flash I get this:
    Loading c1240-rcvk9w8-tar.123-11JX1.tar from 10.1.1.1 (via BVI1): !
    %Tar checksum error in fd 0
    ERROR: Failed to extract from archive file tftp://10.1.1.1/c1240-rcvk9w8-tar.123-11JX1.tar
    Maybe the files are damaged but I have dowloaded them all from cisco.com yesterday.

  • Lightweight Mode Upgrade Tool

    I have installed the latest version of the tool, 3.4, and installed it on an XP SP2 box. Everything looks good, but when I start it returns "C:\Program Files\Cisco Systems\Upgrade Tool\images\c1310-rcvk9w8-tar.124-10b.JA3 - LWAPP Recovery Image is not a valid one".
    I have verified that the file exists and is named correctly. I have also downloaded a new copy of the application and image and installed on a different computer and got the same results. Any ideas?

    Hi EMKF,
    I don't think the problem is with the tool it is with this image "c1310-rcvk9w8-tar.124-10b.JA3" I don't know why they have linked this in the Software Downloads to the LWAPP Upgrade image but I'm pretty sure it is wrong.
    As far as I know all recovery images are JX (not JA etc.)
    I would try this image instead;
    12.3(11)JX1.
    Note This release must only be loaded onto access points at the factory or by using the Autonomous to Lightweight Mode upgrade tool. Your access point might become inoperable if you install this software without using the upgrade tool.
    Release Notes for Cisco Aironet 1100, 1130, 1200, 1230, 1240, and 1300 Series Access Points for Cisco IOS Release 12.3(11)JX1
    http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/b311jx1.html
    c1310-rcvk9w8-tar.123-11JX1.tar
    Here is the link;
    http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=12.3(11)JX1&mdfid=279141937&sftType=Autonomous%20To%20Lightweight%20Mode%20Upgrade%20Image&optPlat=&nodecount=3&edesignator=null&modelName=Cisco%20Aironet%201310%20Access%20Point/Bridge&treeMdfId=278875243&treeName=Wireless&modifmdfid=null&imname=null&hybrid=Y&imst=N&lr=Y
    Check out these notes (no mention of LWAPP Upgrade image)
    Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(10b)JA3
    http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_4_10b_JA3rn.html
    Hope this helps!
    Rob

  • Ap 1252/Enable password after upgrade to LWAPP

    Hi i converted a 1252 to LWAPP with the upgrade tool, but when the ap restarted with the ligthweigh image the access point does not accept the default enable password "Cisco", before upgrade to lightweigh image the enable password was "Cisco" too, now i can not configure the ip address of the controller.
    Thanks.

    If The ap's havent joined the wlc yet you can enter these commands:
    AP#lwapp ap ip address
    AP#lwapp ap ip default-gateway
    AP#lwapp ap controller ip address
    AP#lwapp ap hostname
    (optional)
    Here is a link:
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml

  • BW Upgrade Tool

    Hi All,
    We are developing a BW Upgrade Tool. A part of which gives information about System Landscape that may be useful before or after upgrade for a Basis Consultant. Following information is obtained as a output of the tool. So could you please glance through it & tell me is this information is relevent and what more should be there?
    As I'm a BW consultant I have very little knowlege of Basis.
    System status overview 
      SAP version          640
      operating system     Windows NT
      machine type         2x Intel 801586 (Mod 2 Step 7)
      node name            SAPBL5
      SAP system id        560
      database system      ORACLE
      database name        BL5
      database host        SAPBL5
      database owner       SAPBL5
      rsyn
      IP address           172.25.8.121
      kernel release       640
      database library     OCI_920_SHARE
      kernel compiled      NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10 Aug 21 2005 23
      kernel patch level   87
      supported SAP vers.  610, 620, 630, 640
      supported database   ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.1.0..
      valid OP system      Windows NT 5.0, Windows NT 5.1, Windows NT 5.2
      OP system release    5.0
      ABAP load version    1521
      CUA load version     15
      kernel kind          opt
      relinfo              valid
      hot package level    13                                                         
    Oracle 
      Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
      PL/SQL Release 9.2.0.6.0 - Production
      CORE     9.2.0.6.0     Production
      TNS for 32-bit Windows: Version 9.2.0.6.0 - Production
      NLSRTL Version 9.2.0.6.0 - Production
      disp+work information
      kernel release                640
      kernel make variant           640_REL
      DBMS client library           OCI_920_SHARE
      DBSL shared library version   640.00
      compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
      compilation mode              Non-Unicode
      compile time                  Aug 21 2005 23:40:31
      update level                  0
      patch number                  87
      source id                     0.087
      supported environment
      database (SAP, table SVERS)   610
                                    620
                                    630
                                    640
      DBMS server
         ORACLE 8.1.7..
         ORACLE 9.2.0..
         ORACLE 10.1.0..
      operating system
      Windows NT 5.0
      Windows NT 5.1
      Windows NT 5.2
      disp+work patch information
      ( 0.001) Strings in Inputfields cut off (note 676835)
      ( 0.001) Block insert not stable (note 699411)
      ( 0.001) Sending the SAP logon ticket to SAPJ2EE server (note 691253)
      ( 0.001) TPDA: Exclusive DBG Session Fix (note 698737)
      ( 0.001) SNC-enabled RFC connections (type 3) to unicode systems (note 695205)
      ( 0.001) Loop where with move of C field to N field (note 699528)
      ( 0.001) Multiple instances of same subscreen and f4 ocx (note 698564)
      ( 0.001) ABAP Unit: Support for calling private fixture methods (note 690059)
      ( 0.001) Bidi printing patch collection (note 353987)
      ( 0.001) Problems while debugging a dynpro (flow logic) (note 689633)
      ( 0.001) Sending the SAP logon ticket to SAPJ2EE server (note 691253)
      ( 0.001) SQL Trace: fix error in program name filter (note 697685)
      ( 0.001) Dynamic Invoke Class Constants Defaults (note 701926)
      ( 0.001) Empty title + varying line size (note 671796)
      ( 0.001) RTM/AAB logging inside HTTP request (note 687116)
      ( 0.001) Assertions/BPs: core during RFC (note 700868)
      ( 0.001) ITS ToolBar: toggle button state, get icon name (note 673134)
      ( 0.001) Implicit default table parameters (note 700146)
      ( 0.001) Ignore HTTP-server requests during ITS-processing (note 700871)
      ( 0.001) Kernel Methods: signature of c-macros changed (note 703161)
      ( 0.001) Dynamic Invoke Abstract Inherited Implemented (note 703413)
      ( 0.002) CST patch collection 50 2003 (note 687395)
      ( 0.002) TPDA: patch collection (note 703735)
      ( 0.002) LOOP ... WHERE memory leak (note 703397)
      ( 0.002) RUNT_ILLEGAL_SWITCH during garbage collection (note 702442)
      ( 0.002) Some errors in the debugger with special fieldnames (note 704384)
      ( 0.002) CALL TRANSFORMATION exceptions (note 701467)
      ( 0.002) HTML Escaping of ICF error documents (note 626073)
      ( 0.002) HTTP/External Debugging for RFC (III) (note 668256)
      ( 0.002) JavaScript: enhance roll ability in double hash code (note 703026)
      ( 0.002) Do not enter memcpyRChk during Cache reorg. (note 447519)
      ( 0.002) Dynamic types: get_components hat non unqiue ids (note 703020)
      ( 0.002) ST: initialize result STRING (note 703615)
      ( 0.002) Open SQL: joining tables w/ and w/o client (note 703710)
      ( 0.002) Output error by WRITE (*) using conversion exits (note 677893)
      ( 0.002) Avoid invocation of garbage collector in certain cases (note 704554)
      ( 0.002) ST: Load Size (note 705269)
      ( 0.002) Allocation strategy in ABAP shared objects (note 705956)
      ( 0.003) Correction of design error in Secure Storage (note 702647)
      ( 0.003) Unjustified syntax error when SETUP, TEARDOWN (note 705308)
      ( 0.003) Incoming UTF-8 RFC use UTF-8, not non-Unicode (note 647495)
      ( 0.003) ICU shared libraries upgrade (note 519753)
      ( 0.003) Sapdext: prevent loop of rabax DYNPRO_SAPDEXT_LOOP (note 703374)
      ( 0.003) Oracle multibyte codepage: Incorrect LIKE evaluation (note 695899)
      ( 0.003) Downward compatibility of table statistics (note 707005)
      ( 0.004) Correctly adapt occu of RTTI tables (note 707619)
      ( 0.004) AAB: truncated subkey values (note 708269)
      ( 0.004) Dbbuf: avoid deadlocks in export/import buffer (note 496511)
      ( 0.004) ST: no deserialization map (note 708597)
      ( 0.004) ITS TextEdit: selection functions improved (note 669904)
      ( 0.004) ITS TextEdit: new textstream interface (note 695802)
      ( 0.005) Memory in tmpfs is not released correctly (note 706071)
      ( 0.005) CST patch collection 09 2004 (note 708621)
      ( 0.005) CCMS: agent cannot monitor standalone enqueue server (note 694057)
      ( 0.005) Wrong Fido entries (note 708789)
      ( 0.005) ST: Apply in Loop (note 710150)
      ( 0.005) ST: xml header (note 708787)
      ( 0.005) UTF-8 writer; default namespace; lang(); external options (note 709649)
      ( 0.005) IMPORT: lang key handling (note 512518)
      ( 0.005) HashTab SHO-Read MoveToFront-Heuristik (note 707891)
      ( 0.005) Avoid shortdump DEBUGGER_ILLEGAL_VALUE in abDbgDisVar (note 708356)
      ( 0.005) Making RFC calls with an empty password (note 662390)
      ( 0.005) SYSTEM_CORE_DUMPED in addIDENT (gen/scsymbc.c) (note 685625)
      ( 0.005) SHO: cloning of objects, rehash at detach (note 708843)
      ( 0.006) Print control buffer overflow (note 707500)
      ( 0.006) InitStor:  missing free (note 707929)
      ( 0.006) Free_Area/Instance (note 709558)
      ( 0.006) Shared Objects core at table update (note 712739)
      ( 0.006) BOM / XmlDecl bug (note 592857)
      ( 0.006) Max shared string size (note 592857)
      ( 0.006) Default values of exp/imp function parameters (note 712280)
      ( 0.006) RTM bugfix in get_classname (note 711420)
      ( 0.006) SM51: Allow more than 1000 patch textes altogether (note 712811)
      ( 0.006) C-Call AB_GET_COUNTRY (note 685207)
      ( 0.006) TPDA: Avoid duplicate breakpoints (note 713456)
      ( 0.006) Too many frame characters (note 671796)
      ( 0.006) Check type load time stamp (note 713492)
      ( 0.006) Prevent two short dumps in one second (note 711982)
      ( 0.006) Default values of exp/imp function parameters (2) (note 712280)
      ( 0.007) Default values of exp/imp function parameters (3) (note 712280)
      ( 0.007) RFC Patch Collection  11.2004 (note 715274)
      ( 0.007) ST: Apply in Loop, Variables (note 710150)
      ( 0.007) ST: XML Position in Exception (note 715879)
      ( 0.007) Two Phase Pbag Search (note 713493)
      ( 0.007) LOAD_PROGRAM_CLASS_MISMATCH (note 716456)
      ( 0.007) Syntax error with VERI STRUCTINFO (note 716353)
      ( 0.007) XSLT Core by interface methods (note 709857)
      ( 0.007) Clean prev user after wp restart (note 715877)
      ( 0.007) Debugging rfc after server cleanup (note 715881)
      ( 0.007) CST patch collection 12 2004 (note 716915)
      ( 0.007) CLUSTD converter (deep) / EXPORT (SAP_UINT) (note 612359)
      ( 0.007) Core dump in LOAD_PROGRAM_CLASS_MISMATCH correction (note 716456)
      ( 0.007) SYSTEM_CORE_DUMPED at ATTACH / DETACH (note 718666)
      ( 0.008) SLIN: 640 AKK problem with SYNT_EXT_INFO (note 717012)
      ( 0.008) Error in ab_HshSetDelete (note 719413)
      ( 0.008) AKK violation: Newly appearing syntax error (note 719142)
      ( 0.008) SYSTEM_CORE_DUMPED in sc_program_env (gen/scsymbc.c) (note 719139)
      ( 0.008) Fix charref parsing (note 592857)
      ( 0.008) ALEWEBDOWNLOAD in Unicode systems (note 676835)
      ( 0.008) Support the displaying of  XML Docs in the ITS (note 717380)
      ( 0.008) Open SQL: missing syntax error message texts (note 710454)
      ( 0.008) HTTPS proxy authentication in ICF (note 717995)
      ( 0.008) Diag protocol: multiple codepages (note 621992)
      ( 0.008) Codepage conversion for PDF based jobs (note 719630)
      ( 0.008) Missing dynamic Texts in GUI-Status (note 717870)
      ( 0.008) READ DATASET: Suppress conversion exception if requested (note 709832)
      ( 0.008) Userswitch Inbound-/Outbound-Scheduler (note 212742)
      ( 0.008) CCMS Monitoring Patch Collection 2004/2 (note 694057)
      ( 0.008) SCANNER_MISSING_MESSAGE (note 719396)
      ( 0.008) Unicode: Core Dump in build_initrec, Modul dbntab (note 717717)
      ( 0.008) Snc/accept_insecure_rfc=U for system-to-system calls (note 713495)
      ( 0.009) Error in ab_HshSetDelete (II) (note 719413)
      ( 0.011) Error in ab_HshSetDelete (III) (note 719413)
      ( 0.011) Scroll BCALV_TEST_LIST -> scrolls correctly (note 721384)
      ( 0.011) Userswitch Inbound-/Outbound-Scheduler (note 716263)
      ( 0.011) ST: exception information; littleEndian; tables (note 715879)
      ( 0.011) ST: exception information; littleEndian; tables (note 720364)
      ( 0.011) Exceptions in CALL SCREEN (note 720908)
      ( 0.011) TPDA: prepare fix for dynp debugging (note 719967)
      ( 0.011) RSQL: Correction for MODIFY DBTAB FROM ITAB (note 716037)
      ( 0.011) Enhancements for ITS (note 720738)
      ( 0.011) Avoid short dump LOAD_NOT_FOUND_AFTER_GEN (old timestamp) (note 615022)
      ( 0.011) Display data references in the ABAP debugger (note 721223)
      ( 0.011) remove semaphore families and reorganize all ip__libs (note 721885)
      ( 0.012) Statistics: wrong data in rfc client destination records (note 724253)
      ( 0.012) Wrong length in copy operation in func check_usobt() (note 724528)
      ( 0.012) CST patch collection 15 2004 (note 723952)
      ( 0.012) Invalid Method Call Syntax (note 722346)
      ( 0.012) Invalid Warnung For Class Type (note 722347)
      ( 0.012) Update Memory Inspector (note 684660)
      ( 0.013) Wrong length in copy operation in func check_usobt() (note 724528)
      ( 0.013) Shared Objects: data references and detach (note 722884)
      ( 0.013) Selecting a context menu entry cause session hang up (note 713598)
      ( 0.013) MOVE_TO_LIT_NOTALLOWED with READ ... TRANSPORTING (note 722778)
      ( 0.013) Fix for searchhelp showing only one result value (note 697295)
      ( 0.013) Using keys in dropdown listboxes if no value is supplied (note 717871)
      ( 0.013) ITSP: Hitlist in Unicode systems (note 676835)
      ( 0.013) ShmFreeRemoveInactiveLocks with 2 locks (note 709558)
      ( 0.013) Shared Objects - itab line reference after detach (note 721190)
      ( 0.013) HTTPS proxy authentication in ICF (II) (note 717995)
      ( 0.013) Code pages, languages and locales, packet 37 + 38 (note 447519)
      ( 0.013) Code pages, languages and locales, packet 37 + 38 (note 722638)
      ( 0.013) Ixml_stl / runt / tidy (note 592857)
      ( 0.013) Empty dynprolist does not cancel control rendering any more (note 718292)
      ( 0.013) Enhancements for ITS (note 720738)
      ( 0.013) No debug after Dynp RABAX (note 721693)
      ( 0.013) Multiple instances of same subscreen and f4 ocx (2) (note 698564)
      ( 0.014) ITS640, supporting sap-accessibility (note 676835)
      ( 0.014) XSLT: Unicode in XPath Expressions (note 613113)
      ( 0.014) Search help and focus (note 728722)
      ( 0.014) Ab_PrepareStrh with lenght 0 return not NULL (note 729435)
      ( 0.014) ITS640, Response Container removed (note 676835)
      ( 0.014) Missing print controls (note 707500)
      ( 0.014) Support of ISO Latin-1 characters for certificates (note 723016)
      ( 0.014) EVENT parameter: LIKE, TYPE LINE OF not evaluated (note 724406)
      ( 0.014) MINCHAR, MAXCHAR wrong value (note 724304)
      ( 0.014) ITS640, supporting ~http_https on/off (note 676835)
      ( 0.014) ITS640, takeover logoff/exiturl (note 676835)
      ( 0.014) C-call for printing the cover page (note 720409)
      ( 0.014) Disabling ITS disables the 'Compiling...' progress indicator (note 725617)
      ( 0.014) Grid-View dump, Alewebdownload (note 676835)
      ( 0.014) Trfo Rabax Handling corrected (note 729202)
      ( 0.014) Code pages patch packet 39 (note 447519)
      ( 0.014) Memory allocation for strings reduced (note 721876)
      ( 0.014) READ ... BINARY for SORTED TABLE with attribute key (note 725720)
      ( 0.014) Bidi printing: Corrected rightadjustment of numbers (note 618988)
      ( 0.014) ITS640,takeover command logoff/endofsession SSO (note 676835)
      ( 0.014) CX_SHM_INCONSISTENT; CL_SHM_UTILITIES (note 727142)
      ( 0.014) Prevent 0x00 in database table SNAP (note 722444)
      ( 0.014) Error if print immediately for PDF based forms (note 727914)
      ( 0.015) Correct lookup on password history (note 732038)
      ( 0.015) CCMS Monitoring Patch Collection 2004/2 (note 694057)
      ( 0.015) Core in syntax check (offset length w/ interface comp.) (note 732367)
      ( 0.015) CST patch collection 18 2004 (note 730345)
      ( 0.015) Invalid sapgui codepage (note 700448)
      ( 0.015) NO_PDF flag for ADS spool jobs (note 685576)
      ( 0.015) FxReader set_error (note 722030)
      ( 0.015) Incorrect display of list search results in RTL mode (note 729558)
      ( 0.015) Support of ISO Latin-1 characters for certificates (note 723016)
      ( 0.016) CREATE for key table with default key (note 732922)
      ( 0.016) Rebuild rspoicon.c in krn/rspo (note 724736)
      ( 0.016) Tablesharing fault in MOVE-CORRESPONDING (note 732958)
      ( 0.016) Core at INSERT into table after SORT (note 733079)
      ( 0.016) Supporting ICF-Options for ITS (note 727137)
      ( 0.016) Cl_fx_reader update (note 722030)
      ( 0.016) ITS-Plugin 640: known problems (note 676835)
      ( 0.016) Enable ticket creation for ITS WebGUI/IAC (note 720738)
      ( 0.016) Invisible focus element (note 734746)
      ( 0.016) RFC legacy MDMP callers and Unicode callees (note 722193)
      ( 0.016) Redundant moves in itab operations (note 726657)
      ( 0.016) Attach_for_update returns shared lock (note 733184)
      ( 0.016) Application server hangs on Windows 2003 waiting for semaphore (note 724212)
      ( 0.016) ITS-Plugin 640: known bugs (note 676835)
      ( 0.016) 'CLASS ... FOR TESTING + INTERFACES' (note 722346)
      ( 0.016) Avoid SYSLOG message 'PXA recovery after reboot' (note 689497)
      ( 0.017) ST: alignment for variable-read (note 735543)
      ( 0.017) IMPORT: alignment handling for old exports (note 734897)
      ( 0.017) NT: sapstartsrv prozess auto restart feature (note 729945)
      ( 0.017) IMPORT: error with ignoring structure boundaries (note 737044)
      ( 0.017) Open SQL : Allow more than eight hints (note 735360)
      ( 0.017) Event SAP_SYSTEM_START with parameters (note 681516)
      ( 0.017) Sapgui 640 and tablecontrol column selections (note 735695)
      ( 0.017) Diag trace: unknown entries (note 736592)
      ( 0.017) Debugger: Auth. problems while saving table to local file (note 729616)
      ( 0.017) RFC Patch Collection 18 2004 (note 732744)
      ( 0.017) ABAP Shared Objects: Coredump at ATTACH WRITE (note 733969)
      ( 0.017) TIME_OUT oder Coredump in C-Funktion ab_ScanBase (note 733971)
      ( 0.017) ST: variables, iXML objects (note 737174)
      ( 0.017) destroyed dynpro load (note 207817)
      ( 0.017) Japanese characters were scrambled (note 736835)
      ( 0.017) XI-Editor (note 676835)
      ( 0.017) ITS-Plugin 640: known bugs (note 676835)
      ( 0.017) Correction in session management within function (note 676835)
      ( 0.017) SCAN STRUCTURE: GROUP BY in sub query (note 363992)
      ( 0.017) Segmentation Violation in db_ntab (Makro CHECK_ACC) (note 736340)
      ( 0.018) CREATE_DATA_UNKNOWN_TYPE during XML-ABAP deserialization (note 739134)
      ( 0.018) RUNT_INTERNAL_ERROR during XML-ABAP object (note 739233)
      ( 0.018) ST: deserialization with tt:copy (note 739825)
      ( 0.018) Dynpro Compress: CONTAINER_IGNORE for Table Control set (note 738808)
      ( 0.018) Code pages, languages and locales, packet 40 + 41 (note 447519)
      ( 0.018) RFC Patch Collection 18 2004 (note 732744)
      ( 0.018) Invalid sapgui codepage (note 700448)
      ( 0.018) ERROR trace: invalid value hacurrow hwcurrow (note 651566)
      ( 0.018) IMPORT: AS400 alignment handling (note 739164)
      ( 0.018) Forward POST parameter from ITS frameset (note 737798)
      ( 0.018) Code pages patch packet 42 (note 447519)
      ( 0.018) JavaScript linux64 correct INT_FITS_IN_JSVAL (note 740973)
      ( 0.018) CST patch collection 22 2004 (note 741110)
      ( 0.018) Login/password_charset, codeversion 'D' (note 735356)
      ( 0.019) Ixml shared memory corrections (note 592857)
      ( 0.019) CCMS Agent Patch Collection 2004/3 (note 694057)
      ( 0.019) ST: ignore irrelevant whitespace (note 742507)
      ( 0.019) Code pages patch packet 40 (NT) (note 447519)
      ( 0.020) NT: Optional sequential GUID generation (note 740418)
      ( 0.020) GUI_PATCHLEVEL for app server (note 591681)
      ( 0.020) List Tree, Hyperlinks (note 742066)
      ( 0.020) List Tree, Hyperlinks (note 742066)
      ( 0.020) New HTML(B) strEnc function (note 739619)
      ( 0.020) CST patch collection 25 2004 (note 744711)
      ( 0.021) Prepare for DBPROPERTIES (pack 44) (note 447519)
      ( 0.021) Missing wrapper object of class CX_SY_NO_HANDLER (note 745804)
      ( 0.021) XML-ABAP, SAP_BASIS 610: component names with namespaces (note 745935)
      ( 0.021) Possible Core after MESSAGE string TYPE 'X' (note 746144)
      ( 0.021) XSLT: Computation of xsl:sort attributes (note 746146)
      ( 0.021) SE30: Missing trace file after measurement (note 740184)
      ( 0.021) Wrong free of memory (note 745745)
      ( 0.021) NT: sapstartsrv fix for prozess auto restart feature (note 729945)
      ( 0.021) F1 on pushbuttons (note 744822)
      ( 0.021) ICF: Shortened Session-IDs in Developer-Traces (note 745722)
      ( 0.021) CALL TRANSFORMATION Option VALUE_HANDLING (note 727549)
      ( 0.021) CST patch collection 26 2004 (note 746373)
      ( 0.021) Invalid sapgui codepage (note 700448)
      ( 0.022) Alignment checks for packed numbers (note 747695)
      ( 0.022) Illegal dynpro state after RABAX (note 747694)
      ( 0.022) AsXML: suppress static interface attributes (note 747155)
      ( 0.022) Accept Dynpro Sourceversion 37 (note 743155)
      ( 0.022) ITS Plugin 640, known problems, item 23) security, buffer overwrite (note 676835)
      ( 0.022) Screens with GOS Containers (note 747140)
      ( 0.022) Empty search help dialogs (note 747270)
      ( 0.022) Too many SPOOL* files in global directory (note 749860)
      ( 0.022) New GUID and TID algorithm (note 650280)
      ( 0.022) Code pages patch packet 43 (note 447519) (note 447519)
      ( 0.022) Fixed a tight loop in julep, calling a function with an extra (note 747700)
      ( 0.022) ERROR trace: invalid value hacurrow hwcurrow (note 651566)
      ( 0.023) LZPL OTF driver (note 750002)
      ( 0.023) Correct 132-char limitation (note 750363)
      ( 0.023) RFC: additional returncode-check for ThSendToGui (note 685609)
      ( 0.023) TABLE_LINE_NOT_EXISTING at loop on a HASHED TABLE (note 750042)
      ( 0.023) INSERT of a loop reference into a hashed table (note 749075)
      ( 0.023) Semantics of the SUM statement (note 742683)
      ( 0.023) Diag enhancements for acc support (note 750543)
      ( 0.023) ITS-Plugin 640: Known problems (note 676835)
      ( 0.024) Error in step movenametab (note 745745)
      ( 0.025) HTTP debugging: Save memory ranking to local file (note 752659)
      ( 0.025) Avoid unnecessary calls to semaphore 49 (note 752473)
      ( 0.025) Buffer overflow in OMS command buffer (note 752977)
      ( 0.025) Correct handling of empty strings (note 740987)
      ( 0.027) Open SQL : Allow more than 8 hints in SELECT (note 754728)
      ( 0.027) Full path name to 255 char for temse (note 749150)
      ( 0.027) NT: Fix for occasional 'Service not started' error during Service inst (note 142100)
      ( 0.027) Diag trace: unknown entries (note 736592)
      ( 0.027) CST patch collection 28 2004 (note 751484)
      ( 0.027) Image does not fit (note 676835)
      ( 0.027) Strings and dynpro char fields (note 618120)
      ( 0.027) Core in ab_CxTableViewColOrder (note 751754)
      ( 0.027) ITS HTML Control: protocol not added if missing (note 747962)
      ( 0.027) Ixml stlport memory hole (note 545335)
      ( 0.027) CST patch collection 30 2004 (note 755912)
      ( 0.027) Wrong output of japanese characters II (note 670069)
      ( 0.027) Empty spool list for NEW-PAGE PRINT OFF (note 750153)
      ( 0.027) ABAP List Structure Recognition (1) (note 751494)
      ( 0.027) SHO: Area-constructor at INVALIDATE, setting area-properties (note 751882)
      ( 0.028) SYSTEM_RUDI_INVALID at CREATE OBJECT o TYPE (t) (note 757122)
      ( 0.028) Wrong syntax error at INTERFACES (note 757284)
      ( 0.028) ABAP List Structure Recognition (2) (note 751494)
      ( 0.029) Missing PUBLIC addition of CLASS (note 759104)
      ( 0.029) Open SQL: problem with extended portability check (note 758763)
      ( 0.029) SYSTEM_CORE_DUMPED in ABAP generation for type aliases (note 759109)
      ( 0.029) Codepage Conversion: New flag for Bidi support (note 716200)
      ( 0.029) ITS up/download: upload of files to unicode R/3 incorrect (note 758362)
      ( 0.029) Fixed multiple HtmlPPs bug for resourceless services (note 759228)
      ( 0.029) ITS640 Known bugs Item 26 (note 676835)
      ( 0.030) Check for infinite loops in random number generator (note 759735)
      ( 0.030) ABAP-XML transformation with PARAMETERS infloops (note 746332)
      ( 0.030) Correct SQL EXPLAIN function on UNICODE systems (note 760883)
      ( 0.030) Extend Structure Buffer (note 761324)
      ( 0.030) NT: work processes don't start due to different memory layout (note 761159)
      ( 0.030) RSQL: Correction for DELETE DBTAB FROM ITAB (note 753333)
      ( 0.030) Correct focus handling on F1 help (note 761377)
      ( 0.030) Dbbuf: invalid data read from single key buffer (note 625242)
      ( 0.030) DDIC-Types used by CALL METHOD ... CALLING (note 761843)
      ( 0.030) Warning at CALL METHOD (note 761933)
      ( 0.030) UTF-8 conversion for jobdata (note 739968)
      ( 0.030) CPIC calls for usertype SYSTEM, logon timestamping (note 760414)
      ( 0.030) DB Multiconnect: Closing idle secondary connections (note 762084)
      ( 0.030) TPDA: problems with BREAK-POINT ID  (note 762431)
      ( 0.030) ABAP List Structure Recognition (3) (note 751494)
      ( 0.030) SLC length (note 759208)
      ( 0.030) Corrected namespace handling (note 762678)
      ( 0.031) Correct INT4 I/O (note 627615)
      ( 0.031) No Selectionscreen generation for classes and interfaces (note 744856)
      ( 0.031) RABAX close unused snapfile (note 763333)
      ( 0.031) Data-References and ADD-CORRESPONDING (note 761850)
      ( 0.031) Code pages, languages and locales, packet 46 + 47 (note 447519)
      ( 0.031) SHO: DetachCommit with CompletionError (note 763653)
      ( 0.031) Code pages patch packet 48 (note 447519)
      ( 0.031) Fixed broken %-escaping of multibyte strings (note 763175)
      ( 0.031) Corrected dw_gui.sl linkage on hp platform (note 763292)
      ( 0.031) Runtime error UNEXPECTED_RUDI_TYPE (note 764185)
      ( 0.031) Runtime error SYSTEM_LOAD_OF_PROGRAM_FAILED (note 764186)
      ( 0.031) Runtime error SYSTEM_SHM_AREA_DETACHED (note 764187)
      ( 0.031) Runtime error SAPSQL_WA_WRONG_ALIGNMENT (note 764184)
      ( 0.032) SHO: DetachCommitCompletion failed (Part 2) (note 763653)
      ( 0.032) SHO free on local itab (note 749082)
      ( 0.032) Corrupted report sources/textes after unicode upgrade (note 765377)
      ( 0.032) Process OTF command BM in RTL (note 353987)
      ( 0.032) Trust-Manager: Error when encrypting PSE (note 765123)
      ( 0.032) Security Audit Log: some transaction starts not audited (note 763159)
      ( 0.032) CST patch collection 34 2004 (note 764321)
      ( 0.032) ABAP List Structure Recognition (4) (note 751494)
      ( 0.032) DYN_COMP_ILLEGAL with CREATE DATA (note 766330)
      ( 0.033) Reset SPATPAR flag (note 765605)
      ( 0.033) OMS support for AS400 (note 766732)
      ( 0.033) Open-SQL: SELECT INTO CORRESPONDING FIELDS and generic type of target (note 765822)
      ( 0.033) Rfc patch collection 35 2004 (note 766807)
      ( 0.033) Url form parameter scanning without = sign (note 764903)
      ( 0.033) ITS-Plugin 640: Known/fixed problems (note 676835)
      ( 0.033) ITS TextEdit Control: Text disappears after searchhelp (note 725839)
      ( 0.033) Code pages,converters (package 49) (note 447519)
      ( 0.033) NT: Check CPU timer frequency (note 532350)
      ( 0.033) Code pages patch packet 50 (note 447519)
      ( 0.034) Error in kernel call ABAP_CALLSTACK (note 769503)
      ( 0.034) Runtime error BCD_OVERFLOW converting empty strings (note 769508)
      ( 0.034) Core dump after implicit cast by ASSIGNING (note 766876)
      ( 0.034) Performance: do not read TSP02L for RDI/OTF (note 703798)
      ( 0.034) RFC patch collection 34 2004 (note 769890)
      ( 0.034) Gui scripting: missing loop field names (note 769420)
      ( 0.034) Integrated ITS: garbled hit lists (note 770161)
      ( 0.034) CST patch collection 37 2004 (note 770183)
      ( 0.035) PRINT_LINE_COUNT_TOO_LOW during printing (note 770335)
      ( 0.035) Wrong barcode printout (1) (note 770376)
      ( 0.035) Avoid syntax errors for correct usage of PROVIDE FIELDS (note 771600)
      ( 0.035) New frontend print for SAP GUI for HTML (note 771683)
      ( 0.035) Core or runtime error during modify on projection view (note 770318)
      ( 0.035) Unicode: RFC MDMP dest. garbled code pg., symptom S9 (note 647495)
      ( 0.035) ITS_Browser_Redirect und Content-Length (note 771183)
      ( 0.035) Fix memory corruption in move nametab / dipgntab (note 745745)
      ( 0.035) CALL TRANSFORMATION Parameter INITIAL_COMPONENTS (note 771161)
      ( 0.035) Forward POST parameter from ITS frameset (note 737798)
      ( 0.035) Ixml flush / bindata (note 545335)
      ( 0.035) Code pages,converter (package 51) (note 447519)
      ( 0.035) ITS640: process sap-sesscmd=USR_ABORT like OK-Code=/NEX (note 772251)
      ( 0.035) Core or runtime error during modify on projection view (note 770318)
      ( 0.036) PRINT_LINE_COUNT_TOO_LOW during printing (note 770335)
      ( 0.036) Active tabstrip button and F4 dialogs (note 772922)
      ( 0.036) Docker size and new i-mode (note 615047)
      ( 0.036) Paging related error trace entries (note 694628)
      ( 0.036) Logon error messages show '#' instead of digit chars (note 774211)
      ( 0.036) ITS Calendar: Set Color error fixed (note 767437)
      ( 0.037) AAB breakpoints in system programs (note 774627)
      ( 0.037) Update MemoryInspector II (note 684660)
      ( 0.037) CX_INVALID_TRANSFORMATION (note 773330)
      ( 0.037) Core at customer includes (note 774829)
      ( 0.037) TABLE_LINE with offset/length specification (note 774703)
      ( 0.037) ABAP: core dump at LIKE dref->*-component (note 772941)
      ( 0.037) Failed RFC system calls causing invalid SM20 records (note 774406)
      ( 0.037) ST: deserialization of type N (note 775699)
      ( 0.037) Conversion error in HTML Gui (note 775039)
      ( 0.038) Conversion exits with string parameters (note 776990)
      ( 0.038) Core in debugger data display (note 777203)
      ( 0.038) SLIN: Core dump while collecting cross ref data (note 776596)
      ( 0.038) Start transaktion via systemfunction DYNP_OKCODE_SET (note 776496)
      ( 0.038) Perfomance Fix READ DATASET in TEXT MODE (note 775375)
      ( 0.038) Structure alignment correction: Support for BIDI (note 716200)
      ( 0.038) CST patch collection 40 2004 (note 776283)
      ( 0.038) Steploop radio/checkbutton and label left/right (note 776514)
      ( 0.038) ITS 640 Plugin, known problems, issue 29 (note 676835)
      ( 0.038) Some bugs with lists in webgui fixed (note 762968)
      ( 0.038) ITS Up/Download: UrlDecode for Context Variable obsolet (note 766313)
      ( 0.038) ITS TextEdit: readonly mode in netscape fixed (note 768063)
      ( 0.038) Tolltip texts for columntree icons (note 776561)
      ( 0.038) Known bugs ( issue no 28 ) (note 676835)
      ( 0.038) Closing dangling RFC connections used with printing (note 753080)
      ( 0.038) Introducing strwidth (note 745460)
      ( 0.038) Comparing with a LOOP reference (note 767597)
      ( 0.038) SHO: Cores in GC (note 774465)
      ( 0.038) Trigger Garbage Collection when many PCBs used (note 628303)
      ( 0.038) ABAP-PH: Missing Unicode errors in syntax-check (note 777451)
      ( 0.038) RFC legacy caller, dump on LANG=space in Unicode system. (note 722193)
      ( 0.038) Code pages,converter (package 52) (note 447519)
      ( 0.038) Problems during transport into a Unicode system (note 775114)
      ( 0.038) No Frames Print Parameter (note 777337)
      ( 0.038) List display in Debugger (note 777338)
      ( 0.038) Sapgui/theme default value (note 610274)
      ( 0.038) No initialization of parameter of DESERIALIZE_HELPER (note 777339)
      ( 0.038) Automatic confirmation of Warnings (note 778467)
      ( 0.038) RUNT_ILLEGAL_SWITCH when resetting internal tables (note 778376)
      ( 0.039) # in Asian archived print lists (note 778095)
      ( 0.039) ABAP-SY: Core for dyn. arguments > 255 chars (note 777882)
      ( 0.039) PXA: Introducing PXA_CACHE (note 746984)
      ( 0.039) RTTI DDIC output length > 255 (note 777826)
      ( 0.039) RFC Patchcollection 41 2004 (note 779720)
      ( 0.039) Dynpro: TabStrip and Scrollbar SubScreen Area with CONT_IGN (note 673831)
      ( 0.040) No implicit commit during debugging (note 778582)
      ( 0.040) RFC Patch collection 40 2004 (note 778710)
      ( 0.041) Workprocess hangs on dumping OS process information when memory is low (note 781518)
      ( 0.041) BIDI: Support for fieldwise base direction (note 779879)
      ( 0.041) Foreign key check and chectables with strings (note 780473)
      ( 0.041) ALV grid view entries are not transferred (note 777995)
      ( 0.041) Agate crash when the last line of a grid view is copied (note 775672)
      ( 0.041) ALV grid view column header is not displayed (note 775679)
      ( 0.041) ALV grid view column selection incorrect after dial (note 776587)
      ( 0.041) ALV Gridview 'PAGE UP' leads to the announcement first (note 780570)
      ( 0.041) ITS-PLUGIN: Message handling for IAC (note 779543)
      ( 0.041) Suppress short dump lists in IACs (note 779543)
      ( 0.041) ITS640: enhanced sap-sesscmd handling for webgui (note 772251)
      ( 0.042) Provide kernel functionality for VMIT (note 781997)
      ( 0.042) Rollout rabax save (note 778921)
      ( 0.042) AB_GET_TEXT_FROM_CLUSTER:handling of 50 warnings per statement (note 816246)
      ( 0.059) ABAP-SY: Recursive INCLUDE nesting for classes (note 816247)
      ( 0.059) Error CALL_FUNCTION_ILLEGAL_P_TYPE (note 611004)
      ( 0.059) Diag protocol: multiple codepages (note 621992)
      ( 0.059) Replace strtok with ucafinduca (note 498369)
      ( 0.059) DBIF_RTAB_OUT_OF_CURSORS when using ITS (note 819494)
      ( 0.060) ALV Gridview optimized column width (note 766169)
      ( 0.060) SELECTION-SCREEN INCLUDE PARAMETERS and Listboxes (note 819057)
      ( 0.060) Release independent sapevt (note 802172)
      ( 0.060) RSQL: Correction concerning queries on projection views (note 809297)
      ( 0.060) Check CI include (note 818942)
      ( 0.060) Wrong change record when deactivating initial password (note 819855)
      ( 0.060) TRANSFER to file: Don't truncate East-Asian STRINGs (note 820055)
      ( 0.061) SAAB: Short dump with the minutes announcement in TA SAAB (note 821358)
      ( 0.061) NO F6H message by no record found in TST03 (note 806588)
      ( 0.061) Javascript: adopt binding to changes in note 800346 (note 821710)
      ( 0.061) Enable -SAP- encoding (note 819976)
      ( 0.061) BIDI: Support for fieldwise base direction (note 779879)
      ( 0.061) Menu: dynamic function texts (note 821701)
      ( 0.061) Batch-Input: SYSLOG TREAD - tcode active error (note 822479)
      ( 0.061) RFC patch collection 8 2005 (note 821964)
      ( 0.061) DB Multiconnect: Workprocess restart destroys connection mapping (note 796862)
      ( 0.061) ABAP-SY: Recursive INCLUDE nesting for classes (2) (note 822698)
      ( 0.061) Correction of INF -391 error (note 806993)
      ( 0.062) New frontend print (note 821519)
      ( 0.062) RFC sends large datapackets uncompressed to the SAPGUI (note 824428)
      ( 0.062) Load balance with SNC, provide sncname (note 817854)
      ( 0.062) Menu: dynamic function texts (note 821701)
      ( 0.062) Correct abend in update task debugging (note 824772)
      ( 0.062) Shared Objects: String-Sharing (note 824261)
      ( 0.063) Sharing hash tables (note 825452)
      ( 0.063) Corrections to the Unicode interface (note 522119)
      ( 0.063) Dispatch events in IMC (note 820333)
      ( 0.063) Call transformation: writing to string impr (note 824676)
      ( 0.063) Avoid DBIF_NTAB_TABLE_NOT_FOUND during garbage collection (note 826350)
      ( 0.063) ST: standalone decl / nested call in loop (note 825516)
      ( 0.063) XSLT: Debugger / escaping in namespaces (note 825517)
      ( 0.063) Missing utf8-support in agi-default for webgui (note 825652)
      ( 0.063) Code pages patch packet 62 (note 447519)
      ( 0.063) RUAPO4.1 ~DISCONNECTONCLOSE parameter not working (note 827375)
      ( 0.063) Do no core dump, when some pointers are missing in (note 563769)
      ( 0.064) Spooler level 2 trace bug (note 827514)
      ( 0.064) RTTI lock program (note 822900)
      ( 0.064) Strcpy_sU data misaligned on ntia64 (note 826536)
      ( 0.064) Enabling MSCS support for SAPMMC (note 828432)
      ( 0.064) ITS 6.40: control name = container name for IACs (note 828800)
      ( 0.064) Correct name for tpool proxies and check sum (note 823035)
      ( 0.065) Invalid sapgui input data (note 829096)
      ( 0.065) Protect read-only fields (note 830700)
      ( 0.065) Comparing data refs created via LOOP REF INTO (note 830819)
      ( 0.065) ABAP_ASSERT in extri loop, classical debugger (note 803140)
      ( 0.065) Would core in various ABAP/Dynp situations (note 830710)
      ( 0.065) ABAP-SY: AKK violation for DATA in system include (note 826284)
      ( 0.065) ABAP-SY: Coredump for >50 warnings per statement (2) (note 816246)
      ( 0.065) READ opt. for over specified non-matching key (note 825670)
      ( 0.065) INTERFACE ... DEFFERED in class pools (note 831232)
      ( 0.065) SE30: Avoid error nr 5 for CALL TRANSACTION USING (note 170470)
      ( 0.065) RFC patch collection 12 2005 (note 831456)
      ( 0.066) Rfc Patch Collection 11 2005 (note 828000)
      ( 0.066) FX: utf-8 conv error (note 825516)
      ( 0.066) Core in dy_tx_param() (note 831528)
      ( 0.066) Diagograph(): buffer size check (note 832017)
      ( 0.066) Batch-Input: No Message 00 255 when modify the ok-code (note 833001)
      ( 0.066) PXA/ATRA Patch Collection 12/2004 (note 802791)
      ( 0.066) Search help: F4 within F4 (note 832866)
      ( 0.066) EXCP_INTERNAL_ERROR during debugging (note 833453)
      ( 0.067) ABAP GC on 32-bit platforms when more than 3.4 GB used (note 833336)
      ( 0.067) Diag enhancements for acc support (note 750543)
      ( 0.067) SYSTEM_RUDI_INVALID at ASSIGN with length (note 834179)
      ( 0.067) SHO tab sharing hash collision error (note 829508)
      ( 0.067) SHO: ABAP_ASSERT during update lock with ASSIGING (II) (note 795666)
      ( 0.067) Kernel change for hide/display gridlines and customizing (note 825864)
      ( 0.067) CCMS Monitoring Patch Collection 2005/2 (note 809007) (note 809007)
      ( 0.067) Missing syntax error messages (note 826436)
      ( 0.067) Debugger (jump to statement)' (note 834640)
      ( 0.067) Integrated ITS 6.40: disconnectonclose for IACs in int. ITS)' (note 827375)
      ( 0.067) New ABAP Debugger problems with stack navigation (note 832192)
      ( 0.068) Re-sort of OTF table in ABAP (note 353987)
      ( 0.068) Spooler: Garbage text in REALSRV field (note 835703)
      ( 0.068) Integrated ITS and sap webdispatcher (note 835762)
      ( 0.068) OpenSQL: General support for ABAP-Hints on MAXDB (note 652096)
      ( 0.068) Open SQL: dynamic LIKE and ABAP field as pattern (note 835522)
      ( 0.068) Classic Debugger: itab search & download, watchpts (note 835010)
      ( 0.068) Int. ITS 6.40: ~disconnectonclose for IACs always turned on (note 827375)
      ( 0.068) ISeries: fdopen handling fixed (note 833895)
      ( 0.069) Avoid lockwaits on table TMDIR while debugging (note 837656)
      ( 0.069) Integrated ITS, version information in HTML page (note 838549)
      ( 0.069) Searchhelp select otions, select for blanks (note 836742)
      ( 0.069) RFC logon - security bugfixes (note 830528)
      ( 0.069) Memory leak using table sharing (note 837518)
      ( 0.069) New checks for DDIC type inconsistencies (note 837077)
      ( 0.069) Update list structure recognition 2 (note 751494)
      ( 0.069) WRITE UNDER and COMMON PART (note 825434)
      ( 0.069) Code pages, converters, locales. Package 636465 (note 447519)
      ( 0.069) SORTED TABLE: Memory consumption after MOVE/IMPORT (note 834807)
      ( 0.069) Shared Objects: Multi-Attach; Get_Current_Usage (note 838683)
      ( 0.069) Clear RTM buffer after flushing (note 838305)
      ( 0.069) Core dumps during session end in rare cases (note 838305)
      ( 0.069) CST patch collection 15 2005 (note 834501)
      ( 0.069) ASCII ABAP stack programs and SCS Unicode programs in one dir (note 837731)
      ( 0.069) Actionbar entries without fastpath (note 548709)
      ( 0.069) Fixes for enhanced ASCII support on OS/390 (note 595331)
      ( 0.069) LSR list ourput IV (note 751494)
      ( 0.069) Diag protocol: multiple codepages (note 621992)
      ( 0.069) Itab component access with length specification (note 838229)
      ( 0.069) Fixes for enhanced ASCII support on OS/390 (note 595331)
      ( 0.069) Integrated ITS, problems during conversion of indication (note 831959)
      ( 0.069) Userswitch Inbound-/Outbound-Scheduler (note 716263)
      ( 0.069) Toolbar control remember scroll position (note 806313)
      ( 0.069) Shared Objects: Performance Detach_Commit (note 838596)
      ( 0.070) Revert UTC BufferSync Timestamp until R3Trans and TP (note 749911)
      ( 0.071) Patch collection - logon routine, 1/2005 (note 835038)
      ( 0.071) 16-Byte alignment in rstg_get (note 837410)
      ( 0.071) CCMS RZ20: missing green alerts (note 839672)
      ( 0.071) CCMS RZ20: missing green alerts (note 746193)
      ( 0.071) D021S get each field separately (note 687334)
      ( 0.071) SE30: Avoid error nr. 5 in case of LEAVE SCREEN (note 170470)
      ( 0.071) Performance of compare for shared internal tables (note 839691)
      ( 0.071) Fixed textedit control problem with multipart/form-data ctype (note 841196)
      ( 0.071) ICM crash in HttpPlugInWriteErrorText (note 842609)
      ( 0.072) Enable printing of arabic-indic digits (note 842887)
      ( 0.072) Core after SORT within a LOOP (note 841997)
      ( 0.072) Its-plugin: Overlap of check boxes and radio buttons (note 839070)
      ( 0.072) Usob_authvaltrc for 610/620 (note 842157)
      ( 0.072) Program groups and CFW-modules (note 821158)
      ( 0.072) Program groups and CFW-modules (note 835127)
      ( 0.072) SELECT FOR UPDATE: release locks after commit (note 843042)
      ( 0.072) Set algorithm und key length of SSF PSEs (note 836367)
      ( 0.072) Downport rnd (no effect for disp+work) (note 836008)
      ( 0.073) Template invalidation fixed (note 840220)
      ( 0.073) ITS Up/Download: its plugin error in unicode R3 (note 841263)
      ( 0.073) ITS HTML Viewer: parameters of the sapevent incorrect (note 829669)
      ( 0.073) Correct quickinfo in TC (note 842040)
      ( 0.073) CLUSTER: COMP (note 772941)
      ( 0.076) Search help in mixed mode apps (note 849476)
      ( 0.076) ITS: Empty screen after warning message (note 849337)
      ( 0.076) Toolbarbutton menu (note 848805)
      ( 0.076) Searchelp error in MASSD (note 848289)
      ( 0.076) TABLE_LINE_NOT_EXISTING with MODIFY ... WHERE (note 845378)
      ( 0.076) RFC patch collection 22 2005 (note 850305)
      ( 0.076) Performance Verification Infrastructure-I (note 803789)
      ( 0.077) Catch zero length in ST command (OTF RTL handling) (note 353987)
      ( 0.077) Spooler: CJK string not printed (note 849315)
      ( 0.077) SapSSL-Update, support for OS/400 ASCII kernels (note 772517)
      ( 0.077) ST: Loops; deserial-state; extensibility (note 849075)
      ( 0.077) Dbbuf: enhance performance of single key buffer (note 826729)
      ( 0.077) Unsharing a HASHED TABLE within a loop (note 852036)
      ( 0.077) Fix memory corruption in move-nametab (note 745745)
      ( 0.077) Position of arabian printout (note 849072)
      ( 0.077) DBIF_NTAB_TABLE_NOT_FOUND during garbage collection-II (note 826350)
      ( 0.077) Integrierter ITS, MS Office 2003 session timeout (note 846857)
      ( 0.077) XSLT/iXML: Renderer memory consumption (note 844722)
      ( 0.077) Ixml file streams (note 834242)
      ( 0.077) I18n code page package 69 (late write permission) (note 447519)
      ( 0.077) I18n code page package 67+68 (F5,UMGCCTL,noDB,L) (note 447519)
      ( 0.077) ALV Grid:F4-Help on non-editable fields enabled (note 849656)
      ( 0.077) ALV Gridview dropdown lists are unavailable (note 850272)
      ( 0.077) ALV Gridview remember scroll position (note 839170)
      ( 0.077) Trim content of modified cells (note 850100)
      ( 0.077) CST patch collection 24 2005 (note 851195)
      ( 0.078) Syslog Message for wrong tablename in READ TABLE dbtab (note 851286)
      ( 0.078) CCMS Monitoring Patch Collection 2005/3 (note 809007) (note 809007)
      ( 0.078) Additional legacy RFC dest setup info (note 722193)
      ( 0.078) PROVIDE FIELDS: fix merging of intervals (note 853666)
      ( 0.078) ITS HTML Viewer: incorrect script paths for inserted scripts (note 853051)
      ( 0.078) Memory requests and error traces (note 853608)
      ( 0.078) Ab_BtreeBlockDelete() core on linuxia64 (note 854073)
      ( 0.078) HTML Tidy: get/set option (note 843855)
      ( 0.078) DBIF_NTAB_TABLE_NOT_FOUND during garbage collection (III) (note 826350)
      ( 0.078) Avoid short dump DBIF_REPO_PART_NOT_FOUND (note 854261)
      ( 0.078) Avoid short dump DBIF_REPO_PART_NOT_FOUND (note 854261)
      ( 0.079) PRESCRIBE barcode and subscript bu (note 854502)
      ( 0.079) SORT: use new GETST_TASK_NO_ETRACE (note 193529)
      ( 0.079) Call Transformation: initial refs; core in rabax (note 854572)
      ( 0.079) iXML: namespace context; XSLT: meta tag (note 854571)
      ( 0.079) Problems with CFW modules and ABAP Stack (GC) (note 856468)
      ( 0.079) Ab_BtreeBlockDelete() core, linuxia64 (II) (note 854073)
      ( 0.079) ALV Gridview RowID was not supplied correctly (note 853062)
      ( 0.079) Problems with CFW modules and ABAP Stack (GC) (II) (note 856468)
      ( 0.080) TRMSG-Messages for CALLING method (note 857551)
      ( 0.080) Fill attribute sqlmsg in class CX_SY_NATIVE_SQL_ERROR (note 853002)
      ( 0.080) ITS Up/Down: upload of files in BIN format (note 855475)
      ( 0.080) IXML Miniparser memory consumption (note 426351)
      ( 0.080) Get transaction code from SPA (note 840798)
      ( 0.080) File handling (note 846259)
      ( 0.080) JavaScript more than 65536 lines (note 858307)
      ( 0.080) Rabax trace for section (note 858362)
      ( 0.080) Protect read-only fields (II) (note 842040)
      ( 0.080) List input and control focus (note 858331)
      ( 0.080) Trust-Manager: create PSEs with keylength > 512 bit (note 509495)
      ( 0.080) Correct call of CTL moduls in 6.40 (note 858636)
      ( 0.080) RFC patch collection 26 2005 (note 858707)
      ( 0.080) SncSetMyName() in Unicode-binaries ignores name (note 856809)
      ( 0.080) MaxLength attribute is set to -1 if the backend is Unicode (note 758007)
      ( 0.081) Integrated ITS, error message on transaction selection screen (note 859213)
      ( 0.081) Acces violation in fct. EsIGblMthSlotsPrepare (note 860031)
      ( 0.081) Update Memory Inspector IV (note 684660)
      ( 0.081) Optimization of the algorithm for generating a job log (note 104185)
      ( 0.081) RFC patch collection 27 2005 (note 860531)
      ( 0.081) PXA: avoid mutex corruption after wp restart (note 802791)
      ( 0.081) ALV Gridview Inputlen of cell could be overwritten by column (note 857074)
      ( 0.081) CST Patch Collection 28 2005 (note 860319)
      ( 0.081) In ST01 some auth.objects displayed with garbage (note 855974)
      ( 0.082) ST02: Avoid core dump at NTAB buffers detailed analysis menu (note 859067)
      ( 0.082) AvaScript repair cg for chained jumps (note 861568)
      ( 0.082) Jobs with names in other code pages do not start (note 809888)
      ( 0.082) NT: sapstartsrv detecting J2EE Safe Mode (note 860654)
      ( 0.082) CCMS Monitoring Patch Collection 2005/4 (note 809007)
      ( 0.082) IMPORT: ignore conversion length errors (note 562988)
      ( 0.082) Preloading DLLs to avoid address space fragmentation (note 853696)
      ( 0.083) Definition of SLC flag (note 851307)
      ( 0.083) Syntax warning for MODIFY with INDEX on a HASHED TABLE (note 860304)
      ( 0.083) Error message on fcode /hmusa (note 862612)
      ( 0.083) Update Listparser (note 751494)
      ( 0.083) I18n code page package 7071 (no env, 45000) (note 447519)
      ( 0.083) Garbled double byte characters (note 670069)
      ( 0.083) Dump during abaplist PDF conversion (note 864429)
      ( 0.083) SE30 User Trace (note 716340)
      ( 0.083) SE30 missing trace data in case of particular units (note 864562)
      ( 0.083) Skip unknown sapgui connect data (note 864474)
      ( 0.084) SORT: sharing after phys. sort (note 863934)
      ( 0.084) Reject system okcodes while debuging BTC or VB (note 864607)
      ( 0.084) GC and tab sharing (note 862462)
      ( 0.084) Correct handling of NAZ messages (note 836869)
      ( 0.084) ABAP-SY: Core dump for type in COMMON PART (note 859631)
      ( 0.084) HTML tidy error trace (note 426351)
      ( 0.084) RTTC: illegal type for TYPE HANDLE (note 863747)
      ( 0.084) ABAP-SY: GEN_FRAGVIEW_EMPTY when accessing empty CI (note 865759)
      ( 0.084) SE30: Assure 610/620 compatible file format (note 866355)
      ( 0.084) Cua status traces (note 865763)
      ( 0.084) Core while unsharing a HASHED TABLE in a LOOP (note 866639)
      ( 0.085) MOVE-CORRESPONDING on empty CI-Includes (note 865759)
      ( 0.085) Foreign key messages in BI log (note 867390)
      ( 0.085) Compatibility of external breakpoints (Kernel 6.40, ABAP 6.10) (note 866347)
      ( 0.085) RFC Patchcollection 30 2005 (note 866360)
      ( 0.085) Default tooltip support (note 750543)
      ( 0.085) ST:  with result IXML (note 866256)
      ( 0.085) Patch collection - logon routine, 2/2005 (note 866327)
      ( 0.085) CST Patch Collection 31 2005 (note 867690)
      ( 0.085) Np printon stack (note 864122)
      ( 0.085) AUNIT test class friends (note 852745)
      ( 0.085) Perfomance Fix READ DATASET due to string resize (note 867936)
      ( 0.085) SHO: Commit registration of transactional Areas (note 865094)
      ( 0.085) Core dump when printing RTL documents (note 868178)
      ( 0.085) No trailing blanks of last (note 867921)
      ( 0.086) Code page patch package 74 (note 447519)
      ( 0.086) ICF Patch Collection 02/2005 (note 867361)
      ( 0.086) ALV Gridview core dump in CSapITSGridviewCol (note 869120)
      ( 0.086) Fix overflow, linuxx86_64 responds pretty badly to this (note 772075)
      ( 0.086) Another occurance of the same overflow problem of the ts structure (note 772078)
      ( 0.086) Definition of cellinfo flag (note 851307)
      ( 0.086) ITS Up/Down: implementing of ITS_DIRECTORY_LIST_FILES (note 856141)
      ( 0.086) ITS TextEdit: changed text could be saved in readonly mode sources (note 868919)
      ( 0.086) NT: Traceing deadlock during signal or alarm handling (note 869790)
      ( 0.086) IXML/XSLT: ABAP class registration (note 865779)
      ( 0.086) New diag supportbits (note 866219)
      ( 0.086) IXML conversion buffer (note 866208)
      ( 0.086) RFC patch collection 32 2005 (note 868767)
      ( 0.087) IMPORT: ign cnv len errors and truncation (note 562988)
      ( 0.087) Exit in LOOP AT SCREEN would remove block stack entries (note 870294)
      ( 0.087) ALV Gridview losing single row selection during its roundtrip (note 870999)
      ( 0.087) Patch lsr list output VII (note 779879)
      ( 0.087) ITS Html Viewer: javascript error for gecko Browser in framesets (note 864381)
      ( 0.087) ITS Html Viewer: caching for all binary documents enabled (note 870373)
      ( 0.087) Enhanced SAP encoding methods (note 866020)
      ( 0.087) New SSF Signer-Resultcodes for Certificate Revocation (note 870640)
      ( 0.087) GETWA_NOT_ASSIGNED since PL 84 (note 871851)
      ( 0.087) ALV Gridview Control AGate crash due to error in put_SelectedRows2 (note 865899)
      ( 0.087) ALV Gridview kernel change for expandable/collapsible totals/subtotals (note 861326)
      ( 0.087) Core with CLASS.Type or INTF.Type for data ref in XML-ABAP (note 871774)
      ( 0.087) No runtime type check with CLEANUP INTO  (note 871407)
      dbsl patch information
      ( 0.001) Support of doublebyte character sets (note 695899)
      ( 0.006) Sizecheck for tables includes LOBs (note 713281)
      ( 0.012) MAX_INT_CNT=1000 (note 634263)
      ( 0.019) Correction of ORA-01427 in dbdd_get_size (note 739536)
      ( 0.025) Correction of internal function DbSlPing() (note 748370)
      ( 0.032) Avoid dump when reading negative numbers into type P field (note 764005)
      ( 0.039) NT: work processes don't start due to different memory layout II (note 761159)
      ( 0.055) Secondary connection with multiple NLS environment (note 808505)
      ( 0.073) Automatic reconnect after ORA-03123, ORA-03127 (note 797792)
      ( 0.079) Enable and allow rel. 6.40 for Oracle 8.1.7 (note 851551)
    brbackup 
      BR0051I BRBACKUP 6.40 (12)
      Patch   Date        Note   Text
        3   2004-01-26   700733  Support for secure copy 'scp' command
       11   2004-06-25   749041  Workaround for ORA-12158 on Tru64 Unix
      release note               680046
      kernel release             640
      patch date                 2004-07-28
      patch level                12
      make platform              NTintel
      make mode                  OCI_920_SHARE
      make date                  Sep 19 2004
    brarchive 
      BR0002I BRARCHIVE 6.40 (12)
      Patch   Date        Note   Text
         3   2004-01-26   700733   Support for secure copy 'scp' command
        11   2004-06-25   749041   Workaround for ORA-12158 on Tru64 Unix
        12   2004-07-28   759839   BRARCHIVE fails for database in mount state
      release note               680046
      kernel release             640
      patch date                 2004-07-28
      patch level                12
      make platform              NTintel
      make mode                  OCI_920_SHARE
      make date                  Sep 19 2004
    brrestore 
      BR0401I BRRESTORE 6.40 (12)
      Patch   Date        Note   Text
        3   2004-01-26   700733  Support for secure copy 'scp' command
       11   2004-06-25   749041  Workaround for ORA-12158 on Tru64 Unix
      release note               680046
      kernel release             640
      patch date                 2004-07-28
      patch level                12
      make platform              NTintel
      make mode                  OCI_920_SHARE
      make date                  Sep 19 2004
    brtools 
      BR0651I BRTOOLS 6.40 (12)
      Patch   Date        Note   Text
      release note               680046
      kernel release             640
      patch date                 2004-07-28
      patch level                12
      make platform              NTintel
      make mode                  OCI_920_SHARE
      make date                  Sep 19 2004
    brconnect 
      BR0801I BRCONNECT 6.40 (12)
      Patch   Date        Note   Text
        5   2004-03-19   719581  Delete of old records in arch.log with BRCONNECT
      release note               680046
      kernel release             640
      patch date                 2004-07-28
      patch level                12
      make platform              NTintel
      make mode                  OCI_920_SHARE
      make date                  Sep 19 2004
    sapdba
    tp  
    R3trans 
    saposcol 
    SAPOSCOL version  COLL 20.88 640 - 20.51 NT 05/07/13, 32 bit, multithreaded, Non-Unicode
    compiled at   Aug 22 2005
    systemid      560 (PC with Windows NT)
    relno         6400
    patch text    COLL 20.88 640 - 20.51 NT 05/07/13
    patchno       87
    intno         20020600
    running on    SAPBL5 Windows NT 5.0 2195 Service Pack 4 2x Intel 801586 (Mod 2 Step 7)
    saplicense  
      SAPLICENSE version information
      slic (saplicense) version     3.00
      saplicense information
      kernel release                640
      kernel make variant           640_REL
      compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
      compilation mode              Non-Unicode
      compile time                  Aug 21 2005 19:38:48
      update level                  0
      patch number                  48
      source id                     0.087
      supported environment
      database (SAP, table SVERS)   610
                                    620
                                    630
                                    640
      operating system
      Windows NT 5.0
      Windows NT 5.1
      Windows NT 5.2
    Operating System 
      Parameter                  Changed on     Status    Value
    Database 
      Parameter                                      Changed on  Status  Value
      ACTIVE_INSTANCE_COUNT                          15.06.2005  A
      AQ_TM_PROCESSES                                15.06.2005  A       0
      ARCHIVE

    Dear Pallavi,
    Very useful post!
    I am looking for similar accelerators for
    Software Inventory Accelerator
    Hardware Inventory Accelerator
    Interfaces Inventory
    Customization Assessment Accelerator
    Sizing Tool
    Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
    Request help on such accelerators... Any clues?
    Any reply, help is highly appreciated.
    Regards
    Manish Madhav

  • Upgrade Tool Problems

    v\:* {behavior:url(#default#VML);}
    o\:* {behavior:url(#default#VML);}
    w\:* {behavior:url(#default#VML);}
    .shape {behavior:url(#default#VML);}
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Hello,
    I’m having problems using the Upgrade tool, using the internal TFTP server try as I might I can’t persuade that there isn’t a firewall or ACL blocking TFTP:
    -          I’ve tried using v3.2 and v3.4
    -          I’ve tried using different machines
    -          I’ve turned off all firewalls and removed all ACLs from the APs
    -          I’ve traced the route across the network and can’t see any reason why any traffic would be blocked between the two
    -          I can confirm from the TACACS server that the upgrade tool is authenticating
    ===============================================================================================================
    Using the external TFTP Server I can’t persuade it to work as there seems to be a fault in the script that the upgrade tool tries to run, I’ve looked throught the log the important bit seems to be below where it tries to answer exit to a yes/no question:
    KCHCam.Gnd.Ap1130.4(config)#crypto ca enroll CISCO_IOS_SSC_Cert
    The router has already generated a Self Signed Certificate for
    trustpoint TP-self-signed-3298014188.
    If you continue the existing trustpoint and Self Signed Certificate
    will be deleted.
    Do you want to continue generating a new Self Signed Certificate? [yes/no]: yes
    % The fully-qualified domain name will not be included in the certificate
    Generate Self Signed Router Certificate? [yes/no]: exit
    % Please answer 'yes' or 'no'.
    Generate Self Signed Router Certificate? [yes/no]:  test ssc enable
    % Please answer 'yes' or 'no'.
    Generate Self Signed Router Certificate? [yes/no]: show crypto ca certificates
    % Please answer 'yes' or 'no'.
    Generate Self Signed Router Certificate? [yes/no]:
    The failure message is below:
    2010/08/10 11:17:50 ERROR       172.16.130.154  Unable to Get Root Certificate Status
    Any help would be greatly appreciated.
    Thanks
    Chris

    Have you try remove domain configuration on your autonomous ap? or just write erase and try again.

  • Upgrade tool for technical upgrade of portal

    Hi,
    For upgrading SAP Enterprise Portal 6.0 SP 2 to the latest version of Enterprise Portal (7.0 or 7.1), is there any upgrade tool from SAP that can be used?
    An early response would be greatly appreciated.
    Thanks.

    Hi,
    Check SAP note 1245473 and 1175848...
    Thanks
    sunny

  • Upgrade Tool error

    I want to install lightweight IOS  into Aironet 1131AG by using Upgrade Tool.
    However, some error messages appear saying
    1. ACL / Firewall might be blocking the TFTP.
    2. Disable the ACL/Firewall setting for TFTP.
    I don't set up any ACL because I am trying to install to the Aironet which was just initialized by using mode button.
    Configuration is just like followings
    Is there any possiblity that the configuration block the TFTP communication ?
    now, ping is reachable and directly, I am connecting AP and PC with upgrade tool .
    and windows firewall is disable on the PC.
    But the upgrade tool is error.
    Please let me know the reason why the TFTP communication is failed.
    best regards
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    Building configuration...
    Current configuration : 1361 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname ap
    no aaa new-mode
    power inline negotiation prestandard source
    username Cisco password 7 XXXXXXXXX
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    shutdown
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    shutdown
    no dfs band block
    channel dfs
    station-role root
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface FastEthernet0
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface BVI1
    ip address 192.168.0.1 255.255.255.0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    bridge 1 route ip

    Shouichi,
    Adding to Scott--After the 1230 family, you don't really need the upgrade tool anymore because the newer APs all come with Manufacturer Installed Certificates (MICs), which is something a lot of the older 1230s didn't have (some did, some didn't).
    One of the main functions of the Upgrade Tool is to generate an SSC on older APs without MICs and then store the key hash for installation into the controller so that the AP can join. (You can even do this without the tool, but it can get pretty labor intensive if you're doing it manually on the AP CLI.)
    The other nice feature of the Upgrade Tool is its batching capability, but you can do this pretty simply with a Windows CLI, CatTools, or scripted within most of the popular terminal apps.
    While it's a decent effort by Cisco to make converting APs a bit easier, unless I'm working on 1230s, I try to avoid the Upgrade Tool as I've found it likes to express its bugs at exactly the wrong moments.
    Justin

  • After installed iPhoto upgrader tool, photos software is still asking for IPhoto needs to be update, why?

    MAC OSX :- 10.10.3
    IPHOTO :- 9.6
    I have recently updated my os x 10.10.2 to 10.10.3 and found iPhoto software dose'nt work. there is some other application appears called photos like iPhone,when i am trying to open it, asking to marge iPhoto library. so tried to marge but it is asking to upgrade iPhoto through a iPhoto Library Upgrader tool. i have installed that but problem is still there - needs to upgrade your iPhoto library. why?

    You need to upgrade the application not the Library. 10.10.3 requires v9.6.1
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • HT5037 The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

    The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.

    Your Library is damaged.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    As for goign back: do you have an undamaged library?
    Regards
    TD

  • HT5037 What is the iPhoto Library Upgrader tool?  Should not need it, because installed Photo 9.5.1 three days ago, AND my iphoto will not open. The message says if I have v8.x or later, I don't need this tool.

    Why is my iPhoto 9.5.1 blocked?
    Message on pop up screen says I need the Library Upgrader tool, when in the very discription of it: "If your library is from iPhoto (v8.x) or later, you don't need to use this tool."

    What version of iPhoto did you have prior to upgrading to iPhoto 9.5.1?  The following is from this download page: iPhoto Library Upgrader 1.1
    This tool prepares libraries from iPhoto 7 or earlier so they can be upgraded with the current version of iPhoto.
    So if you previous version of iPhoto was 7 or earlier you need to download (it installs in the Applications/Utilities folder), launch and apply it to your iPhoto Library before opening the library with iPhoto 9.5.1.
    OT

  • CCX 7.0 pre-upgrade tool ERROR

    Dear ALL,
    I'm planning to upgrade my CCX 7.0 to the latest version,  I know that  I need to  take the backup  with pre-upgrade tool,
    But When  I enter  details of SFTP and  click to take a  backup  I'm getting this error:
    Cisco Unified CCX backup pre-check operation failed. Check the pre-upgrade tool log for more details.
    Please see below  the log file.
    May 4, 2015 2:12:07 PM com.cisco.ccx.w1.log.PUTLogger getLogger
    INFO: ############# Cisco Unified CCX W1 Pre-Upgrade Tool Logger #############
    May 4, 2015 2:12:07 PM com.cisco.ccx.w1.export.ui.PreUpgradeTool main
    INFO: Creating the Pre Upgrade Tool (1.0 Build 108)
    May 4, 2015 2:12:08 PM com.cisco.ccx.w1.export.ui.JHTMLEditorPane init
    WARNING: Pre-Upgrade Tool status colors C8D2DC, F3F3FF
    May 4, 2015 2:12:08 PM com.cisco.ccx.w1.export.ui.PreUpgradeTool initStatus
    INFO: Initializing the status windows
    May 4, 2015 2:12:29 PM com.cisco.ccx.w1.export.ui.WelcomeScreen jButton0ActionActionPerformed
    INFO: CCX Version is 7.0(1)_Build168
    May 4, 2015 2:15:49 PM com.cisco.ccx.w1.export.ui.SFTPScreen jButton0ActionActionPerformed
    INFO: Checking the SFTP connection. Server = 10.100.0.93 , UserName = cisco, Password = 0c52000a73
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ui.ProgressScreen startBackup
    INFO: Starting the backup process ...
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ui.ProgressScreen startBackup
    INFO: Initializing the Export manager thread.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ui.SFTPScreen jButton0ActionActionPerformed
    WARNING: Closing the SFTP connection.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager <init>
    INFO: W1 Pre-Upgrade Tool version is 1.0 Build 108
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager <init>
    INFO: Instantiating the W1 Upgrade ExportManager.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager execute
    INFO: Starting the W1 Upgrade backup operation.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager execute
    INFO: ExportManager arguments are, {BackupLocation [Server = 10.100.0.93, Path = \, UserName = cisco, password = *******, Type = SFTP], StatusListener = com.cisco.ccx.w1.export.ui.W1StatusListener@d57bcb }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.CCXUtil printRuntimeInfo
    INFO:
    ===========================
    Available Processors = 2
    JVM Max Memory = 493.06 MB
    JVM Total Memory = 106.94 MB
    JVM Free Memory = 83.61 MB
    ===========================
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager init
    INFO: W1 Config contents [ ConfigMap : {$$Backup Data Type=W1 Pre Upgrade Backup, JRE Version=1.6.0_13, PUT Version=1.0 Build 108, OS Version=Windows 2003,x86,5.2, Backup Start Time=Mon May 04 14:15:57 AZST 2015, User Name=Administrator}
     ParamMap : {}
     AppProperty : {com.cisco.ccx.w1.proxy.enabled=true, w1.stage.alarm=config\alarm, w1.put.instance.nwerr.skip=true, w1.stage.logs=logs, w1.stage.recordings=recordings, com.cisco.ccx.w1.put.retry=5, com.cisco.ccx.w1.put.colors=C8D2DC,F3F3FF, com.cisco.ccx.config.mgr.args=, w1.put.instance.port=13403, com.cisco.ccx.w1.put.lnf=com.sun.java.swing.plaf.nimbus.NimbusLookAndFeel, w1.stage.jtrace=config\jtapi, w1.stage.database=db, w1.stage.config=config, com.cisco.ccx.w1.config.properties=CustomFileClasspath.properties,currency.properties,SubsystemRmCm.properties,TTSProvider.properties,CustomStep.properties,CustomSubsystem.properties,SubsystemEDBS.properties,locale.properties,application.MIVR.properties,system.properties, com.cisco.ccx.w1.cl.timeout=120, com.cisco.ccx.w1.stage.dir=C:\W1-STI, w1.stage.license=7xLicense, w1.stage.calabrio=cl}
     Backup dir : C:\W1-STI ]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager isDefaultLocale
    INFO: checking if the locale is set to the default locale en_US)
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager isDefaultLocale
    INFO: The current locale is ...en_US
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager isCCXVersionSupported
    INFO: CCX version  = 7.0(1)_Build168
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator <init>
    INFO: CVDCommunicator default constructor.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator getCVDPort
    INFO: Default CVD port set as 994
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator getCVDPort
    INFO: Querying  WIN registry on localhost to get the CVD Master listener port.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator getCVDPort
    INFO: CVD Master listener port string returned from registry = 994
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator getCVDPort
    INFO: Returning CVD Master listener port : 994
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator <init>
    INFO: ccxHost = /127.0.0.1 port = 994
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator openCVDSession
    INFO: Getting the socket input and output stream.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator openCVDSession
    INFO: Sending a CVD Open Session request.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendOpenSessionReq
    INFO: Sending {Req = OPEN_REQ, versionNbr = 1 , invokeID = 123 }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator openCVDSession
    INFO: Waiting for a CVD Open Session response.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 4 , Msg Type : OPEN_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processOpenSessionResponse
    INFO: Invoke ID : 123
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator openCVDSession
    INFO: Got the CVD Open Session response.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager initCVDCommunicator
    INFO: Initialized the CVDCommunicator
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendSvcSnapshotReq
    INFO: Sending {Req = ENABLE_SNAPSHOT_REQ,  service = CRS Cluster View Daemon }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 42 , Msg Type : ENABLE_SNAPSHOT_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Requested service : CRS Cluster View Daemon, service in response : CRS Cluster View Daemon
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Total service count : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.4, state : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.5, state : 0
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendSvcSnapshotReq
    INFO: Sending {Req = ENABLE_SNAPSHOT_REQ,  service = CRS Engine }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 29 , Msg Type : ENABLE_SNAPSHOT_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Requested service : CRS Engine, service in response : CRS Engine
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Total service count : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.4, state : 6
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.5, state : 0
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendSvcSnapshotReq
    INFO: Sending {Req = ENABLE_SNAPSHOT_REQ,  service = Cisco Desktop Recording Service }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 50 , Msg Type : ENABLE_SNAPSHOT_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Requested service : Cisco Desktop Recording Service, service in response : Cisco Desktop Recording Service
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Total service count : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.4, state : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.5, state : 0
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendSvcSnapshotReq
    INFO: Sending {Req = ENABLE_SNAPSHOT_REQ,  service = Cisco Desktop VoIP Monitor Service }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 53 , Msg Type : ENABLE_SNAPSHOT_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Requested service : Cisco Desktop VoIP Monitor Service, service in response : Cisco Desktop VoIP Monitor Service
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: Total service count : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.4, state : 2
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processSnapshotResponse
    INFO: IP Address : 172.30.30.5, state : 0
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkMaster
    INFO: Querying engine master and DB  publisher node.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendRegMasterListener
    INFO: Sending {Req = REG_MASTER_LISTENER, masterName = CRS Engine }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 16 , Msg Type : REG_MASTER_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processMasterResponse
    INFO: Master service name in the response : CRS Engine
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processMasterResponse
    INFO: Master IP address in the response : 172.30.30.4
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendRegMasterListener
    INFO: Sending {Req = REG_MASTER_LISTENER, masterName = CRS SQL Server - Historical }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 33 , Msg Type : REG_MASTER_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processMasterResponse
    INFO: Master service name in the response : CRS SQL Server - Historical
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processMasterResponse
    INFO: Master IP address in the response : 172.30.30.4
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkMaster
    INFO: Engine master node = 172.30.30.4, DB publisher = 172.30.30.4
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkLicense
    INFO: Validating the license info.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendChkoutLicenseRequest
    INFO: Sending {Req = CHECKOUT_LICENSE_REQ,  license = IVR_ENHANCED }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 18 , Msg Type : CHECKOUT_LICENSE_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicChkoutResponse
    INFO: Requested license : IVR_ENHANCED, License in response : IVR_ENHANCED
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicChkoutResponse
    INFO: License checkout : true
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendLicenseRequest
    INFO: Sending {Req = GET_LICENSE_REQ,  license = PRE_SEAT }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 14 , Msg Type : GET_LICENSE_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicenseResponse
    INFO: Requested license : PRE_SEAT, License in response : PRE_SEAT
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicenseResponse
    INFO: License Count : 5
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendChkoutLicenseRequest
    INFO: Sending {Req = CHECKOUT_LICENSE_REQ,  license = WARM_STANDBY }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 18 , Msg Type : CHECKOUT_LICENSE_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicChkoutResponse
    INFO: Requested license : WARM_STANDBY, License in response : WARM_STANDBY
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicChkoutResponse
    INFO: License checkout : true
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator sendLicenseRequest
    INFO: Sending {Req = GET_LICENSE_REQ,  license = IVR_PORTS }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processResponse
    INFO: Response header is :  { Msg Len : 15 , Msg Type : GET_LICENSE_CONF }
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicenseResponse
    INFO: Requested license : IVR_PORTS, License in response : IVR_PORTS
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator processLicenseResponse
    INFO: License Count : 10
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkLicense
    INFO: License Package = Cisco Unified CCX Premium, SeatCount = 5, HA = true, IVR Ports = 10
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkLicense
    INFO: ## License package is Express
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.cvd.CVDCommunicator close
    INFO: Closing the CVD connection.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.export.ExportManager checkProxy
    INFO: Checking the proxy configurations.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isManualProxyEnabled
    INFO: Proxy Enable Reg Value : dword:00000000
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isManualProxyEnabled
    INFO: Manual proxy NOT enabled.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isAutoProxyEnabled
    INFO: Proxy Auto Config URL : null
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isAutoProxyEnabled
    INFO: Proxy Auto Config NOT enabled.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Checking the Java proxy settings.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Querying applicable proxies for the protocol => "http"
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Applicable Proxies : [DIRECT]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Querying applicable proxies for the protocol => "https"
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Applicable Proxies : [DIRECT]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Querying applicable proxies for the protocol => "ftp"
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Applicable Proxies : [DIRECT]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Querying applicable proxies for the protocol => "gopher"
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Applicable Proxies : [DIRECT]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Querying applicable proxies for the protocol => "socket"
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Applicable Proxies : [DIRECT]
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.util.proxy.ProxyUtil isJavaProxyEnabled
    INFO: Java Proxy NOT enabled.
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter <clinit>
    INFO: Cisco Unified CCX root directory : c:\progra~1\wfavvid
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter isMMStarted
    INFO: Manager Manager is NOT started
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: Creating the Windows URL classloader params
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter createParams
    INFO: Raw URLClassloaderParams : "Editor Class Loader";{0}\CiscoManagerManagerImpl.jar;com.cisco.manager.impl.ManagerManagerImpl;-property;{1};{2};{3};{4};-rootdir;{5};com.cisco.ccx.w1.config.mgr.MMInitLock
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: URLClassloaderParams : "Editor Class Loader", c:\progra~1\wfavvid\lib\CiscoManagerManagerImpl.jar, com.cisco.manager.impl.ManagerManagerImpl, -property, application.MCET.properties, -nokeepalive, -rootdir, c:\progra~1\wfavvid, com.cisco.ccx.w1.config.mgr.MMInitLock
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: Redirecting the ManagerManagerImpl output
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: Invoking the ManagerManagerImpl using the URLClassloader
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.URLClassLoader main
    INFO: Invoking the URLClassLoader
    May 4, 2015 2:15:57 PM com.cisco.ccx.w1.config.mgr.URLClassLoader convertToURL
    INFO: *** Adding classpath: c:\progra~1\wfavvid\lib\CiscoManagerManagerImpl.jar, URL = file:/c:/progra~1/wfavvid/lib/CiscoManagerManagerImpl.jar
    May 4, 2015 2:15:58 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: ManagerManagerImpl initialization completed and waiting for the MMInitLock(Startable class to get invoked)
    May 4, 2015 2:15:59 PM com.cisco.ccx.w1.config.mgr.MMInitLock start
    INFO: Inside the startable class
    May 4, 2015 2:15:59 PM com.cisco.ccx.w1.config.mgr.MMInitLock start
    INFO: Notifying the object waiting for the mutex
    May 4, 2015 2:15:59 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: Config framework started completely.
    May 4, 2015 2:15:59 PM com.cisco.ccx.w1.config.mgr.ConfigManagerStarter initMM
    INFO: Restoring the Outputstream if -redirect is enabled
    May 4, 2015 2:15:59 PM com.cisco.ccx.w1.export.cl.CLMigration getAllNodeIPs
    INFO: Cluster IP addresses are, 172.30.30.5, 172.30.30.4
    May 4, 2015 2:16:00 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: CCX Node with IP address 172.30.30.5 is reachable.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: CCX Node with IP address 172.30.30.4 is reachable.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: Getting the node config for UCCX1
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: Local node config is NodeConfig[schema=NodeConfig,time=Mon Nov 09 12:55:40 AZT 2009,recordId=-668476853,desc=,node id=1,computer name=UCCX1,ip addresses=172.30.30.4,model=7816I02,nodeGuid={BDF658EF-26F2-4871-8FE4-C508A8AD387E},osArchitecture=X86-based PC,osName=Microsoft Windows Server 2003,osVersion=502,vendor=IBM,installtime=Mon Nov 09 12:55:03 AZT 2009,upgrade time=Mon Nov 09 12:55:03 AZT 2009,ccm colocated=false,deployment type=1,harddisk size=236472,install path=C:\Program Files\wfavvid\]
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: Getting all engine node ids.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager startConfigManager
    INFO: Engine node ids = 2,1
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getInstance
    INFO: Creating the DB Util instance.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil <init>
    INFO: Loading the net.sourceforge.jtds.jdbc.Driver
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil <init>
    INFO: DB Publisher IP is 172.30.30.4
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil <init>
    INFO: DB CRA Url =  jdbc:jtds:sqlserver://172.30.30.4:4433/db_cra
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil <init>
    INFO: DB CRA Repository Url =  jdbc:jtds:sqlserver://172.30.30.4:4433/db_cra_repository
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil <init>
    INFO: FCRasSvr Url =  jdbc:jtds:sqlserver://172.30.30.4:4433/FCRasSvr
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Getting connection for jdbc:jtds:sqlserver://172.30.30.4:4433/db_cra
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Obtaining new Connection.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getDbSpaceUsed
    INFO: DB Spaced used for db_cra is 479117312 bytes
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager checkSpace
    INFO: Max allowed DB space=10.00 GB, Used db_cra space=456.92 MB
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Getting connection for jdbc:jtds:sqlserver://172.30.30.4:4433/db_cra_repository
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Obtaining new Connection.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getDbSpaceUsed
    INFO: DB Spaced used for db_cra_repository is 9175040 bytes
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Getting connection for jdbc:jtds:sqlserver://172.30.30.4:4433/FCRasSvr
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getConnection
    INFO: Obtaining new Connection.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.db.util.DatabaseUtil getDbSpaceUsed
    INFO: DB Spaced used for FCRasSvr is 6938624 bytes
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager checkSpace
    INFO: Estimating the recording file size.
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.cl.CLMigration getAllNodeIPs
    INFO: Cluster IP addresses are, 172.30.30.4, 172.30.30.5
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.cl.CLMigration getRecordingFolder
    INFO: Recording file location for the node 172.30.30.4 is C:\Program Files\Cisco\Desktop_Audio
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.cl.CLMigration getRecordingFolder
    INFO: Recording folder UNC path for node 172.30.30.4 is \\172.30.30.4\C$\Program Files\Cisco\Desktop_Audio
    May 4, 2015 2:16:01 PM com.cisco.ccx.w1.export.ExportManager getRecSpace
    INFO: Recording folder (*.Raw) size for IP 172.30.30.4 is 0.00 Bytes
    May 4, 2015 2:16:43 PM com.cisco.ccx.w1.export.ExportManager preCheck
    SEVERE: Error while doing Cisco Unified CCX backup pre-check
    com.cisco.lang.IllegalArgumentException: errCode=-1; nested exception is:
        com.ice.jni.registry.RegistryException: Registry API Error 53, '' - 'RegConnectRegistry()'
        at com.cisco.util.RegistryProperties.<init>(RegistryProperties.java:474)
        at com.cisco.util.RegistryProperties.<init>(RegistryProperties.java:408)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRegHandle(CLConfigUtil.java:300)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRecordingsLocation0(CLConfigUtil.java:221)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRecordingsLocation(CLConfigUtil.java:183)
        at com.cisco.ccx.w1.export.cl.CLMigration.getRecordingFolder(CLMigration.java:493)
        at com.cisco.ccx.w1.export.ExportManager.getRecSpace(ExportManager.java:926)
        at com.cisco.ccx.w1.export.ExportManager.checkSpace(ExportManager.java:995)
        at com.cisco.ccx.w1.export.ExportManager.preCheck(ExportManager.java:593)
        at com.cisco.ccx.w1.export.ExportManager.process(ExportManager.java:371)
        at com.cisco.ccx.w1.export.ExportManager.execute(ExportManager.java:263)
        at com.cisco.ccx.w1.export.ui.ProgressScreen$1.run(ProgressScreen.java:80)
        nested stack trace is:
        com.ice.jni.registry.RegistryException: Registry API Error 53, '' - 'RegConnectRegistry()'
        at com.ice.jni.registry.RegistryKey.connectRegistry(Native Method)
        at com.cisco.util.RegistryProperties.<init>(RegistryProperties.java:441)
        at com.cisco.util.RegistryProperties.<init>(RegistryProperties.java:408)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRegHandle(CLConfigUtil.java:300)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRecordingsLocation0(CLConfigUtil.java:221)
        at com.cisco.ccx.w1.export.cl.CLConfigUtil.getRecordingsLocation(CLConfigUtil.java:183)
        at com.cisco.ccx.w1.export.cl.CLMigration.getRecordingFolder(CLMigration.java:493)
        at com.cisco.ccx.w1.export.ExportManager.getRecSpace(ExportManager.java:926)
        at com.cisco.ccx.w1.export.ExportManager.checkSpace(ExportManager.java:995)
        at com.cisco.ccx.w1.export.ExportManager.preCheck(ExportManager.java:593)
        at com.cisco.ccx.w1.export.ExportManager.process(ExportManager.java:371)
        at com.cisco.ccx.w1.export.ExportManager.execute(ExportManager.java:263)
        at com.cisco.ccx.w1.export.ui.ProgressScreen$1.run(ProgressScreen.java:80)
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ExportManager destroy
    INFO: Cisco Unified CCX Backup destroy called.
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ExportManager destroy
    INFO: Final W1 Config contents [ ConfigMap : {License Seat Count=5, Unified CCX Engine Master=172.30.30.4, Unified CCX Engine Count=2, PUT Run On=172.30.30.4, Engine Node IDs=2,1, PUT Version=1.0 Build 108, OS Version=Windows 2003,x86,5.2, Node ID=1, User Name=Administrator, License Package Type=Cisco Unified Express, Unified CCX Rec Nodes=172.30.30.4, 172.30.30.5, IVR Port Count=10, License Package=Cisco Unified CCX Premium, $$Backup Data Type=W1 Pre Upgrade Backup, JRE Version=1.6.0_13, Unified CCX Mon Nodes=172.30.30.4, 172.30.30.5, Unified CCX Nodes=172.30.30.4, 172.30.30.5, Backup Start Time=Mon May 04 14:15:57 AZST 2015, Host Name=UCCX1, Unified CCX DB Publisher=172.30.30.4}
     ParamMap : {Unified CCX Engine Count=2, node.id=1, IVR Port Count=10}
     AppProperty : {com.cisco.ccx.w1.proxy.enabled=true, w1.stage.alarm=config\alarm, w1.put.instance.nwerr.skip=true, w1.stage.logs=logs, w1.stage.recordings=recordings, com.cisco.ccx.w1.put.retry=5, com.cisco.ccx.w1.put.colors=C8D2DC,F3F3FF, com.cisco.ccx.config.mgr.args=, w1.put.instance.port=13403, com.cisco.ccx.w1.put.lnf=com.sun.java.swing.plaf.nimbus.NimbusLookAndFeel, w1.stage.jtrace=config\jtapi, w1.stage.database=db, w1.stage.config=config, com.cisco.ccx.w1.config.properties=CustomFileClasspath.properties,currency.properties,SubsystemRmCm.properties,TTSProvider.properties,CustomStep.properties,CustomSubsystem.properties,SubsystemEDBS.properties,locale.properties,application.MIVR.properties,system.properties, com.cisco.ccx.w1.cl.timeout=120, com.cisco.ccx.w1.stage.dir=C:\W1-STI, w1.stage.license=7xLicense, w1.stage.calabrio=cl}
     Backup dir : C:\W1-STI ]
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ExportManager execute
    SEVERE: Cisco Unified CCX Backup operation failed. ProcessResult = false
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ui.JHTMLEditorPane saveStatus
    INFO: Saving the PUT backup status and logs.
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ui.JHTMLEditorPane createZip
    INFO: Getting the PUT log files from C:\
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ui.JHTMLEditorPane createZip
    INFO: Creating the log archive file C:\PUTLog04-May-15#14-16.zip
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.export.ui.JHTMLEditorPane saveStatus
    INFO: PUT logs backup completed.
    May 4, 2015 2:16:50 PM com.cisco.ccx.w1.util.CCXUtil printRuntimeInfo
    INFO:
    ===========================
    Available Processors = 2
    JVM Max Memory = 493.06 MB
    JVM Total Memory = 118.88 MB
    JVM Free Memory = 90.53 MB
    ===========================

    The primary reason for this error is when a codec is not installed on the box that your running Windows Media Player from (that is the common knowledge part)...a possible reason for this could be that some wav files are being saved in different formats than others. A quick check to see if there are different CTI port groups configured to use different codec would prove that out. Also...can you play the files on another computer or in a different player like VLC?
    Peace,
    Michael Clendening

Maybe you are looking for

  • Can you listen to iTunes on two computers at the same time?

    If I've got iTunes playing on one computer, is it possible to listen on another computer on the same network what's playing on the first computer? I've often got two computers on the go over two floors and it would be smart if they were playing the s

  • In CS6, can I track movement (fixed camera) like I could in CS5

    Hey there, Just trying to track some text to a moving hand, filmed on a tripod so it's fixed view. I could do it in CS5 but I am now using CS6 and the 3D tracker only seems to want to track the environment, not movement within it. Please help! Thanks

  • Customization for Plant to Plant transfer

    Hi Everybody ! There is a requirement saying that the system should request Incoming Certificate for the GR which is based on a Transfer Order(i.e. Plant to Plant transfer). From the answers to my previous query I know that standard SAP does not supp

  • How to download email images

    When I download my (g)mail none of the images show, how do i get them? Solved! Go to Solution.

  • Ricoh CL4000DN printer driver for Snow Leopard

    Has anyone discovered a driver or workaround for a networked Ricoh CL4000DN printer for Snow Leopard? This printer isn't listed in Apple's printer driver list but I downloaded and installed the Ricoh drivers anyway. Didn't help. I submitted a questio