Upgrade usb-9215 with usb-9162 for ni-daqmx

we have purchased usb-9215 last month. we are disappointed with daqmx-base we want to upgrade to daqmx and try it with measurement studio. it looks if we can shift to usb-9162 carrier we can upgrade to daqmx.
pls advice.
NI-DAQmx Upgrade for USB-9211 and USB-9215 Devices Installation Guide - July 2005 - Manuals NI-DAQmx Upgrade for USB-9211 and USB-9215 Devices Installation Guide - July 2005 - Manuals

Tom W. wrote:
Hi All- I want to point out an inaccuracy in John's post- the USB-9215 is NOT supported by NI-DAQmx. You must use a USB-9215A if you would like to program using the NI-DAQmx driver as the USB-9215 is and will only be supported by NI-DAQmx Base. Please check this KnowledgeBase for more details. Thanks-
Huh. I was relying on the readme.html file that ships with NI-DAQ 7.5, which lists simply "NI USB-9215".
I note that the article linked by Tom includes, "An upgrade kit is available for the USB-9211 and USB-9215."
If the original poster just bought his 9215, perhaps he can trade it in on a new one.
Tom- is NI still selling both? Is there a difference in specs, or just in the under-the-hood workings?
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

Similar Messages

How to install usb-9162 for diadem

Hi all,
I want to install a Hi-Speed USB Carrier "NI USB-9162" with a NI 9215A for Diadem.
I did this:
Install the software from CD (driver and max...)
Plug in the hardware in USB (Hardware found)
Reinstall / Update my Diadem 9.1 to 9.1 sp2c
Configure the hardware in "Measurement & Automation" v4.0.0.3010
I see my device in devices.
I created a voltage-task with 4 channels, continous, 1kHz
I started Diadem - DAC and thought, that I could use the icon for NI-DAQ Input, but a doubleclick shows an error.
see Attachment
I think, I forgot anything - perhaps a dll...!?
I couldn't find any help for this hardware for using in diadem on CD.
greets Andreas
Volkswagen AG
Wolfsburg - Germany
Attachments:
error.gif ‏17 KB

Thx again Johannes,
I downloaded and installed it. But under devices in MAx there is only the mx-device. (see Attachment: Max3.gif).
I tried to create a new traditional device but there I couldn't find my device (see Attachment: Max4.gif).
I started DIAdem and clicked to the icon - no error message, but the Max-signal-list is empty.
I added a channel in that list and started my DAC. But then there comes an error-message that this signal isn't defined in Max.
So where can I do that and how?
greets Andreas
Volkswagen AG
Wolfsburg - Germany
Attachments:
max3.gif ‏109 KB
max4.gif ‏39 KB

Mac Mini Upgrade to Lion with USB: can't download Server Add On

I have a Mac Mini on Snow Leopard and I bought the Lion USB key to upgrade to Lion. I have a weak internet connection. Unfortunately, the first thing that happens when I insert the USB key and start the upgrade is that it needs to download the Server Add On. What is very bad is that it says to look on the App Store app to monitor the download but there is nothing happening here. My ADSL box shows no activity. Why do I have to download this? how many Mb is it? can I skip it somehow? If I cancel, it cancels the installation...
I am very disappointed and unhappy by this, I thought I would upgrade to Lion easily, especially after buying the USB key for 69 euros (I live in France).

annmamac wrote:
The only solution I found is wipe the hard drive, install Lion then install the server part. I am not really interested in a drastic solution as this one which takes time and careful backup and is stressful.
At the very least, were I upgrading like you, I'd clone what I have to an external -- either bootable or in a disk image -- in case you need to roll back.
I've never upgraded any version of Server before, but that drastic measure I take all the time with major OS upgrades. And Snow Leopard to Lion is a major OS upgrade.
It's too bad that Apple doesn't make a straight Lion Server OS "bundle" available for purchase for the price of Lion client + server add on. That way you wouldn't have to do a two-step install to get to Lion Server. It certainly exists, I've downloaded it for my Mac Mini Server, which shipped with Lion Server, when I wanted to reinstall Lion Server.

Manually sync Notes and Safari bookmarks via USB cable for iOS device and an iMac with MacOS 10.7 Lion and iTunes 11

"I'm aware that with MacOS 10.8 Mountain Lion there is no support for USB cable sync of iOS devices." Notes and Safari Bookmarks cannot longer be sync via USB cable with iTunes. For owners of iPhone 3G that cannot upgraded the device to a version higher than iOS 4.2, syncing Notes and Safari Bookmarks via usb cable with iTunes is the only option we have. There is no iCloud integration for Notes and Safari Bookmarks under iOS 4.2. I'm not updating to MacOS 10.8, because there is no way to sync Notes and Safari Bookmarks via cable. So I won't be able to sync those anymore unless I upgrade to a newer model of iPhone. I'm not into a new hardware investment, at least not for now. I just want to know if iTunes 11 running in MacOS 10.7 Lion still have the functionality of sync Notes and Safari Bookmarks via USB cable.

Mac OS 10.7.5 and iTunes 11.0.4.
jlbr wrote:
I want to confirm if "other" still appears with iTunes 11 and MacOS 10.7 for sync Notes and Safari Bookmarks:
Yes.
If you are sincing Notes via iCloud, iTunes will tell you so.
If you change the iDevice - Settings> iCloud > Notes - Off, they sync (or not sync) thru iTunes (either wifi or cable).
So my question now would be:
Is "Notes" manual sync checkbox option provided under "Others" in iTunes 11.0.1 with MacOS 10.7 Lion?
If you change the iDevice - Settings> iCloud > Notes - Off, then yes.

I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

I got an Ipod shuffle because I have two cars with USB port for mp3. It doesn't work. Can it ever?

im not shure but if you get an 3.5 mm sterio headphone jack and plug that in your car and shuffle it should work just as good

NI cDAQ 9172 with 3 USB 9233 for collecting impact hammer data

Hello,
I am collecting data on a NI cDAQ 9172 with 3 USB 9233 cRIO. The software I am using is Sound and Vibration assistant. I have setup the necessary parameters and trigger. The impact hammer is connected on the USB 9233 module one and the rest of the channels on the first module and remaining two modules are accelerometer channels. Would I have a problem triggering the rest of the channels on module 2 and 3?
I have attached my project file for you to have a look at. Thank you very much for your help.
Attachments:
Xrx-run1_11-19-try1.seproj ‏239 KB

The data acquisition part of the project should have just one step. All the channels should be in the daq step of the project. In this way they are all sampled simultaneously and all channels will be triggered and sampled at the same time. This looks like you have this in your project.
I would consider using the cDAQ chassis as the holder of the 9233 which you have. In your project you have all the 9233's in the cDAQ chassis - this is also good.
Since your DAQ step has all the channels, the trigger applies to all the channels in the DAQ step. consider putting a time series plot on your view so that you can see all the data after the trigger. In other words drag the triggered data from the trigger step out onto a graph.
You can also review the the example which ships with the assistant for impact test. Pull down the help menu, select open example, select sound and vibration assistant, and then select the SVA_Impact Test example project.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Hi- Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7.

Hi- My Iphone 5 wont charge using power cable or USB...I am using a genuine apple charger/cable..this started after I was prompted with new update for IOS 7 yesterday. My phone is dead and wouldnt power up ..have tried resetting using itunes but i doesnt detect the phone and..pressing sleep/home button doesnt do anything

Update
I guess that it just had a bad connecting port on the phone itself, no clue why it wouldn't work when plugged in both ways other than there is actually some differentiating between the two sides.

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly apprec

I Baught A iMac 2010 From Someone it came with lion but for the programs i use i need snow leopard but when trying to install it won't boot from usb or cd what can be the problem i've been at this for over 24 hours if anyone ca help it'd be greatly appreciate it! Thanks!

Downgrade OS X Lion To Snow Leopard [Video How-To]
http://www.cultofmac.com/110614/downgrade-os-x-lion-to-snow-leopard-video-how-to /
How To Downgrade OS X Lion To Snow Leopard: The Complete Tutorial
http://www.redmondpie.com/how-to-downgrade-os-x-lion-to-snow-leopard-the-complet e-tutorial/
How To Downgrade from Apple OS X Lion to Snow Leopard
http://www.pcmag.com/article2/0,2817,2389334,00.asp

Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

thanks

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

I cant make a bootable (usb/dvd) for windows 8.1 pro 64 bit

right now i am using windows 8.1 pro 32 bit ,, want to change to 64 bit , my CPU is 64 bit and i have 4 GB ram (i know i should have more ram ,, but i dont do this upgrade for the ram , but because some emulators , and some application
ask 64 bit) so i used every possible way on my computer , using windows 7 download tool , rufus , etc programs to make the usb , imgburn for dvd , i did from a friends computer that is windows 8.1 pro 64 bit ,, but nothing everything DOESN'T work ,
all 32 bit editions boot and install just perfect (created by my computer ) so its not a computer problem ,, when i put the media on my computer (dvd/usb) and restart and boot on it ,, its shows me the windows logo ,, after 20 seconds (too much)
it shows the ring , and then it reboots the computer (2/10 tries it manages to go in the language selection screen ,, but when i click next ,, and then i click install now button ,, it reboots again) what is going wrong , and how can i fix it (where
should i make that bootable media ?) i have bought the windows from dreamspark ,, so i use a official iso and serial key

Hi,
This is not license problem, in my opinion, it's more relate with hardware and their driver problem.
Firstly, it would be better to contact the manufacture to identify if your computer support Windows 8.1 X64 edition.
Secondly, if your former system was not removed, try to access into the system and upgrade BIOS editon, after that, try to reinstall the system again for test.
Roger Lu
TechNet Community Support

Can I take synchronous data from 2 NI9215/USB-9162's using VI-Logger Lite

I am a total noob, so this may be posted (although I have done a search and can not find the direct answer)
We have 2 NI-9215 / USB-9162 devices that we want to take synchronous
data from using VI Logger. When these devices were sold to us, we
were told that this was possible, but it appears as if it is not.
Both devices appear in the Devices and interfaces pull down, and I can
operate either one of them separately, but not together.
Thanks

Hi Ted,
Since you have to run the two acquisitions in different tasks, they are run independently and cannot be synchronized. Is there a way for you to specify a start trigger for the task? Also, what do you mean that "it doesn't like running two tasks at once"? Does it slow down your computer performance? What are the specs of your computer?
Regards,
Nicholas B, National Instruments

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

Using cell phone as a 3G USB modem for Leopard

Hi All,
I just get an MacBook Pro the last week, I was happy with the UI of the OS at first sight, but when come to the setting of the network, I am really frustrated.
I get a SE P1i cell phone, I would like to use it as a usb modem for my MAC so that I can have 3G internet connection when on the road. But the problem is that, I can't connect it to my MAC at all!
Leopard can regonize my phone but it seems that none of the modem script(including the SONY ERICSSON script pre-installed) work for my phone. when I checked in the activity log, I see that the result of running every modem scripts are
"CCLExit: -6019 (Modem error, modem not responding.)"
I guess it should not be the problem of my phone as I try using SE K800i, the same result...
although I know that I can use the bluetooth rather the USB cable to connect them together, I would prefer USB cable as it is faster and more secure.
anyway, any help would be appreciated.

detailed instructions:
http://blog.evandavey.com/2008/02/how-to-connect-huawei-e220-usb-modem.html
scripts (and instructions):
http://www.taniwha.org.uk/
(generally I understand one does the same as with a bluetooth phone, but plugs in the usb cable and skips the bluetooth part)

Is it possible to have two USB drives for the IPad? I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive. One of my cameras does not use an SD card. How can I do this?

Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

Upgrade usb-9215 with usb-9162 for ni-daqmx

Similar Messages

Maybe you are looking for