Upgrade window 2003 to Window 2008 R2 approach (Moss 2007)

I have moss 2007 running window 2003 32 bit (1wfe and 1sql server). There quite a few customization that i dont know about. I need to move it to Window 2008 R2 or higher. Anyone have done this? I need a good approach with less risk and impact. I'll build
a new server in window 2008 R2 so it is not an in-place upgrade. I have Moss 2007 SP2, that will work on Window 2008 R2?

- make sure any/all customizations support 64-bit (for SP2007, this is especially true for iFilters, though occasionally WSP's as well)
- install 64-bit onto new server
- add to existing farm -Do you mean adding this using config wizzard?
- move all services from old server to new server - Do this in central admin? Can i just turn on on new server and leave it still on on the old server?
- redirect DNS
- disconnect old server from farm - Do you mean adding
this using config wizzard?
- disconnect old server from domain
- turn off old server
- celebrate

Similar Messages

Window 2003 upgrade to window 2008 R2 for Moss 2007

I am currently running Moss 2007 on window 2003 32 bit. I need to move it to 2008 r2 64bit.
currently 1sql, 1webapp
i plan to add 64bit webapp(running window 2008 r2 64bit) to the farm, then remove the 32 bit webapp. here are my question
is that an ok approach since msdn recommend remove sql server first?
patch? does it have to be the same level? do i install 64 bit patches on win08 R2 or 32 bit? I am assuming 64 since i am running 64 bit window?
what about custom web part, fab40? do i need to redeploy?
Anyone have step by step instruction?

Refer to the following MSDN article
https://technet.microsoft.com/en-us/library/dd637753%28v=office.12%29.aspx?f=255&MSPPError=-2147217396
Also refer to the following article on best approaches to upgrade.
http://www.go4sharepoint.com/Forum/best-approach-upgrade-moss-2007-windows-22904.aspx
And yes, you need to migrate your custom web part and fab40 template manually by redeploying.
Cheers,

Upgrade Windows 2008 R2 sp1 on an Exchange 2010 SP3 server

I have looked high and low for an answer to this question:
1. I have Windows 2008 R2 running Exchange 2010 SP3
2. Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?
3. Are there pre-requisites for doing this?
4. If so, where can I get the documentation?
I have spent hours looking through Google and Technet. Lots of information about compatibility of 2008 R2 and Exchange SP1 and SP2.
Your wisdom and experience would be appreciated. Thank you!!
Charlie

Hi,
"Can I upgrade Windows 2008 R2 to SP1 with Exchange 2010 SP3 onboard?"
Yes, you can.
"Are there pre-requisites for doing this?"
There is no pre-requisites, however, as what Idan Vexler mentioned above, downtime is required.
"If so, where can I get the documentation?"
Here are two related threads for your reference.
http://social.technet.microsoft.com/Forums/en-US/1093a91d-aed8-4c91-b538-ca82f5860523/upgrading-windows-2008-r2-enterprise-to-sp1-on-exchange-2010?forum=exchange2010
http://social.technet.microsoft.com/Forums/exchange/en-US/0a7f29a2-04a5-485f-9b0c-061f89b311a5/installing-windows-2008r2-sp1-on-exchange-server-2010?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

In place upgrade Windows 2008 and SQL 2008

Hi all,
We are planning to upgrade to Windows 2012 and SQL 2012 , can we take this in-place upgrade path in the following order ?
Setup 1 Host with 2 VM's running Windows 2008 R2 on Host and Windows 2008 R2/sqL 2008 on VM's.
1. Host1(running 2 VM's) - In-place upgrade windows 2008 R2 to windows 2012 R2
2. VM1 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2
3. VM2 on host1 - In place upgrade windows 2008 R2 to Windows 2012 R2 (AD Server)
4. SQL running VM1 - In place upgrade SQL 2008 with DB/reporting services to SQL 2012 DB/reporting services
All Servers ( including Host and VM's) are stand alone in a workgroup setup.( except one VM a stand alone AD server by itself).
Thanks for your help.

Hi,
If you want migrate from windows 2008r2 to windows 2012r2, you must install windows server 2008r2 sp1.
http://technet.microsoft.com/en-us/library/dn303416.aspx
For the host 1 upgrade, please refer to the following:
http://blog.powerbiz.net.au/server-2012/in-place-upgrade-from-windows-server-2008-r2-to-windows-server-2012/
For the SQL in-place upgrade, i think you may need to ask in SQL forums:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlservermigration
Hope this helps.
Regards.
Vivian Wang

Domain Controller upgrade windows 2008 r2 to windows 2012

I currently have 3 windows 2008 r2 domain controllers. 1 physical and 2 virtual. I am looking to see what the best upgrade path would be. the physical is the primary and has dhcp and dns services
Stonecold31666

See this,
http://social.technet.microsoft.com/wiki/contents/articles/16797.upgrade-to-active-directory-2012.aspx
Regards
Biswajit Biswas
My
Blogs|TechnetWiki
Ninja
Best regards Biswajit Biswas Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin

In-place upgrade Windows 2008 to 2008R2 and effects on SharePoint

I have a SharePoint farm, with a WFE running on Windows 2008 64 bit. THe APP and SQL server both use 2008R2. It's a complicated setup, with many custom applications. Rather than a fresh install, we would prefer to maintain our current applications and configuration.
Can I perform an in-place 2008R2 upgrade? Will it affect SharePoint? The Farm?
Backup strategies?
Thanks,
Scott

Hi Scott,
Operating System in place upgrade is NOT supported with SharePoint 2010. It is recommended that building a new Win2008 R2 and restoring a backup of your SharePoint 2010.
For more information, you can have a look at the blogs:
https://social.technet.microsoft.com/Forums/en-US/8c638ca6-0edf-4d5d-a443-3841cb64f673/inplace-upgrade-from-windows-2008-to-2008-r2-breaks-sharepoint-2010?forum=sharepointadminprevious
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Upgrade Windows 2008 R2 Standard to 2008 R2 Enterprise fails

Hi,
I am trying to perform an in place upgrade from Windows Server 2008 R2 Standard to Enterprise. I want to setup some things with failover clustering. The install goes all the way to the last step where it is transferring files and then it hangs. This server
is in my home and I don't have a plethora of servers to play with so I need to upgrade. This server is an HP ProLiant ML330 G6. My other server is a DL385G2 running 2008 R2 Enterprise. They are different because I was scouring eBay and pounced when a deal
came up. :-)
This server is a DC and it is running:
DHCP
DNS
Exchange 2010
MS Forefront Security
Print Server
DFS Namespace
DFSR (I have a second server that it replicates with)
All HP services (But I disable them for the upgrade)
I suspect that it is failing on a print driver but I am not sure. I disabled all non-MS services from boot. I also added the system environment variable with the iphlp dll. (can't recall it right at this moment)
The way I have been doing this is to power off the server, break the RAID 1 O/S mirror by removing 1 of the drives, power up and run the upgrade. If it fails, I power off, insert the drive I removed and pop out the "upgraded" drive. Boot up, pop
in the failed upgrade drive and let it rebuild.
Any thoughts? The last time it failed I let it back out the upgrade and I copied off a bunch of the setup log files before I restored the previous mirrored drive.
I am also contemplating upgrading this server to 2012 R2. Would using my RAID 1 method above work? I don't know if the upgrade will change something with the server's computer account therefore not allowing me to revert to 2008 R2.
Lastly, I know that I shouldn't have all of these services on one server, but this is in my home and not a work environment. It runs fairly flawlessly.

Hi,
In addition to Dave Patrick, what is the error message when you upgrade failed?
Meanwhile, please check this article:
http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading-windows-server-2008-r2-without-media.aspx
It seems like the server can't be a DC at the time of upgrade. If you demote a DC using dcpromo, you can upgrade, then re-promote it.
Regards.
If you have any feedback on our support, please click
here
Vivian Wang

How to upgrade the extended web application for FBA from MOSS 2007 to SharePoint 2010?

Hi All,
Currently my farm version is MOSS 2007 with SP3.
I have a web application on port 80, and is based on windows authentication, and i extend it on the port 90, and the authentication is FBA with SqlServer.
I know that SharePoint 2010 has a new claims based authentication, and in a single web application you can do both windows authentication and FBA.
Now i want to know, when i migrate the MOSS 2007 port 80 and port 90, which method should i choose?
1. in SharePoint 2010 farm, Create a classic based web application on port 80, and extend it on port 90, enable FBA on port 90. It is the same as MOSS 2007.
2. in SharePoint 2010 farm, Create a claims based web application, and enable both windows authentication and FBA.
Thanks.

FBA requires claims so you'll need to create a claims based web application. Whilst you might extend the site to give you a FBA portal the web application itself will have to be claims based.
I would definitely be looking at using a database attach upgrade path in your case to give you the opportunity for testing as moving between authentication providers can be painful.

Issue in Upgrading Windows 2008 R2 Standard server to Windows 2012 Standard Srever

Hi
We have a Windows Server 2008 R2 stadard running... (came with the server).
To use 64GB, we have just purchased a licence key (retail) and downloaded ISO (Evaluation version) to upgrade.
Then I got this error message saying that
"Windows Server 2008 R2 Standard cannot be upgraded to Windows Server 2012 Standard Evaluation (Server with a GUI). You can choose to install a new copy of Windows Server 2012 Standard Evaluation (Server with a GUI) instead, but this is different from
an upgrade, and does not keep your files, settings, and programs."
Well, fresh installation is not an option for me. no way..
I read somewhere that it is because I am trying to upgrade from licenced 2008 R2 standard to evaluation 2012 standard. Then I saw a screenshot where you supply a licence key after selecting an edition to choose..
I don't get that screen sinceit is the evaluation version.
Well, I am supposed to upgrade the system before the end of the new year... now I am in a panic.. - - ;;
Can anyone help me with this please???

Hi,
Thank you for posting in Windows Server Forum.
Agree with words of “Dave & Tim” and based on my research, we need to perform a clean installation of Windows Server 2012 Evaluation Versions instead upgrading.
However, if we have licensed Windows Server 2012, we can upgrade to Windows Server 2012 by referring to the Upgrading previous retail versions of Windows Server to Windows Server 2012 part of
Evaluation Versions and Upgrade Options for Windows Server 2012.
Hope it helps!
Regards.

Restore Exchange 2007 SP3 to Windows 2008 R2 from Windows 2003

Perhaps I'm being dense, but I had Exchange 2007 SP3 installed on a Windows 2003 Server, and I've used "setup /mode:recoverserver" to restore it to a Windows 2008 R2 server... how do I restore the databases which I backed up with the Windows backup tool
on 2003?
I installed KB974674, the restore tool onto the 2008 R2 server but when I try and restore the backup it comes up with "this feature is no longer supported". Something I'm missing here?

These things marked as answers are not answers.
I have now thoroughly tested using setup /mode:recoverserver and it works fine going from Windows 2003 to Windows 2008 R2 with Exchange 2007 SP3, done several installations now without a problem.
"Setup /m:RecoverServer cannot be used across operating systems. A server that was originally running Windows Server 2003 can be recovered only on Windows Server 2003, and a server that was originally running Windows Server 2008 can
be recovered only on Windows Server 2008."
This appears to be wrong, unless someone can tell me why it's right (I haven't tried moving Unified Messaging yet). I've done it to 2008 R2 several times now and also in the other direction, from 2008 R2 to 2003, I can't find anything that didn't work
afterward, although I haven't really thoroughly tested OWA yet, I admit (but it does appear to be working).
I think that documentation is out-of-date as it doesn't mention R2 plus I think it was written before SP3 came out and that paragraph is just wrong.
Basically how I do it is like this:
Dismount databases from the 2003 server and copy the storage group folders to a network location or removable media.
Install the Windows 2008 R2 server using the same machine account that was being used by the 2003 server. Install the prerequisites needed for Exchange 2007 SP3 installation on 2008 R2 (note in addition to the IIS components and RPC over HTTP this
also requires the AD tools in RSAT, which I haven't found mentioned in technical documentation). Install the relevant windows updates.
Install Exchange 2007 SP3 using setup /mode:recoverserver Install the update rollup.
Copy the storage groups into the relevant folders on the new server and mount them. Migrate any relevant certificates (e.g. for ActiveSync).
Obviously then check it all over with the diagnostic tools and check it with EXBPA. The backups are obviously totally different, but really I think you should be using DPM anyway.
To me that was pretty easy to do, to be honest. About 1.5 on a scale of one to ten. Basically install it, recover it, copy over some files and mount them.
Seriously on a halfway decent server I've done it in under an hour.

Upgrade from a two tier EBS 11i 11.5.10.2 on Windows 2003 Apps and Windows 2008 R2 DB tier to two Tier R12.2.3 both on Windows 2008 R2

Hi,
Any ideas about the best practices for the migration/upgrade reflected with the below question?
I have a source EBS11i 11.5.10.2 running as a two tier configuration ( apps tier on server ora10 on Windows 2003, DB tier 11.2.0.2 on server ora1 on Windows 8 R2. Can I use the Note 1377213.1 for a migration to a two tier configuration ( apps tier on server T10 running Windows 2008 R2 and EBS 12.2.3 and DB tier running 11.2.0.4 on Windows 2008 R2 )? What alternative approach could you suggest? As far as I know EBS11i is not certified on Windows 2008 R2 and R12.2.0 is not certified on Windows 2003.

Yes you can by following "Application Tier Upgrades and Migrations" section -- Install 12.2 apps tier on 64-bit Windows and proceed with the upgrade.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Microsoft Windows x64 (64-bit) (Doc ID 1330706.1)
Thanks,
Hussein

In place upgrade Windows 2003 to Windows 2008 R2 fails, how to troubleshoot?

Hello,
I'm upgrading in Below is setuterr.log 2014-07-21 15:44:29, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:47:51, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:53, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:57:06, Error place Windows 2003 R2 to Windows 2008 R2 and upgrades rolls back on it's own with no indication for reasoning.
which is full of errors but I can not figure out which specific one is curlpit. Any ideas?
Number of Enumerated Devices = 6[gle=0x00000103]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08071d] MIG Mig::CDownlevelOCStore::AddOCsFromManifests: Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man.: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0808fe] MIG Plugin {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}: BthMig: Failed to migrate bthport keys, bailing out
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\sankap\NTUSER.DAT; giving up (2).[gle=0x00000003]

Hi,
Most probably these kind of errors pop up if the drivers are not compatible. Do you find any .dmp files under folder C:\$WINDOWS.~BT\Sources ? If so
open it with debugger and check for the affected .sys file name.
Check the DVD media, or try a different media.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/691bb048-f63f-41fd-a152-e502671fb27e/upgrade-to-from-windows-server-2003-r2-x64-to-windows-server-2008-x64-failed-4-times-so-far?forum=winserverMigration
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Inplace and side by side upgrade from windows 2003 64 bit R2 contains SSRS 2008 R2 to windows 2008 64 bit R2

Hello All,
   Case 1 -In place upgrade
   I would like to do in place upgrade from windows 2003 64 bit R2 that contains SSRS 2008 to windows 2008 R2 64 bit. The upgrade would be happened at OS level not at SSRS level.
   I would like to know what are the necessary steps should be taken prior/during/post upgrade from SSRS end as we can not rollback if there is some issue with in place upgrade.
Case 2-Side by side upgrade
I would like to do side by side migration from windows 2003 32 bit that contains SSRS 2008 to windows 2008 R2 64 bit. The side by side would be happened at both OS level and SSRS level.
  I would like to know what are the necessary steps should be taken prior/during/post side by side migration from SSRS end.

Before doing anything Take backups .
In case of reporting services..
Back up your symmetric key. For more information.
Back up your report server databases and configuration files. For more information.
Back up any customizations to existing Reporting Services virtual directories in IIS.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Thanks,
Shashikant

Windows 2003 SP2 servers migrating from IIS 6.0 to IIS 7.5 without upgrading to Windows 2008 R2

I have 3 Windows 2003 SP2 servers running IIS 6.0 and my client wants to upgrade to IIS 7.5 without having to upgrade the OS to Windows 2008 R2. Is this possible?
Thanks

No I'm afraid not. The full versions of IIS depend on the OS, so IIS6 on 2003, IIS7 on 2008, IIS7.5 on 2008 R2.
The Express version of IIS can be installed on 2003 but that's for developers only so no use in your situation.
Also worth nothing in terms of upgrading, unless your 2003 installation is 64-bit then you can only do an in place upgrade to 2008 IIS7. There's no 32-bit option with 2008 R2, and no way to do an in place upgrade between 32-bit and 64-bit, so if you really
need to upgrade to IIS 7.5 then your only option would be to start with a new install and then migrate the websites from one server to another.

UPGRADE WINDOWS 2000 TO 2003 OR 2008 WITH EBS - 11.5.10.2 AND DB 10GR2

Hi ...
We have a new project to start upgrade windows 2000 to 2003 or 2008 (Wich it is better ) . As I woudl like to know what our options here .any reference will be more useful .
I think of cloning option . What do you think ?
Thanks in advance .
Regards,

Hi,
We have a new project to start upgrade windows 2000 to 2003 or 2008 (Wich it is better ) . As I woudl like to know what our options here .any reference will be more useful .You would need to go with Windows 2003 as Windows 2008 is not certified with 11i -- See (Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]) for details.
I think of cloning option . What do you think ?You can use Rapid Clone to clone the instance from Windows 2000 to Windows 2003 as per the following docs.
Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
Or, you could just upgrade the OS directly, and in this case please make sure you follow the steps in these docs.
Note: 356878.1 - How to relink the whole Applications 11i Installation
Note: 407055.1 - Process To Upgrade the Operating System and Oracle Database Server
Thanks,
Hussein

Upgrade window 2003 to Window 2008 R2 approach (Moss 2007)

Similar Messages

Maybe you are looking for