Upgrade windows 2003 standard to 2008 enterprise

Current Environment:
Windows Standard 2003 64 Bit Edition
VMware
EP 7.0 Eph1
We want to upgrade our windows version to Enterprise 2008 64 Bit.
Please let me know how to proceed with this ? How do we prepare the system to continue this upgrade without uninstall SAP
Thank you

> We want to upgrade our windows version to Enterprise 2008 64 Bit.
> Please let me know how to proceed with this ? How do we prepare the system to continue this upgrade without uninstall SAP
There are ways of doing in-place upgrades (see Note 1494740 - SAP system migration from Windows 2003 to 2008 (R2) 64-bit) but since the hardware drivers changed from 2003 to 2008 you may have a hard time getting the system back up after you do an in-place upgrade.
I would do a homogeneous system copy, that's the safest way.
Markus

Similar Messages

BPC for NetWeaver OS requirement - Windows 2003 Standard vs. Enterprise

Hello BPC Expert,
I have a question in regard to the Windows Server 2003 edition for SAP BPC 7.0 for NetWeaver. On the Installation Guide of BPC NetWeaver SP03, the prerequisite for the Operating System for .NET Server component is Windows Server 2003 Enterprise Edition.
My question: will Windows Server 2003 Standard Edition work for .NET component? We have a budget concern as the Enterprise Edition will cost couple more thousands than standard.
Thank you,
Bomo

Hi,
Yes you can use the Windows Server 2003 Standard Edition (32-bit and 64-bit). Shouldnt be a problem.
Thanks.

Migrating windows 2003 standard edition to windows 2008 enterprise edition

Hi
We are using ECC 5.0 and our PRD system is running on windows 2003 standard edition,and recently we have got some physical memory problem.as windows 2003 standard edition supports only 4 GB of RAM. and we want to extend our RAM for that we are planning to upgrade os to windows 2008 enterprise edition,is that possible.and after upgrading OS what are the activities that need to be performed for SAP to run succesfully,kindly suggest.
Regards
Pranav

Hi Markus
I read note SAP Note 690432 - Windows 2003 Support in it regarding upgradation of os windows 2003 standard edition to windows 2003 enterprise edition.
Upgrade of Your Operating System
If you upgrade an existing SAP system to Windows Server 2003 perform the
following actions:
o Install the latest R3DLLINS
You find the latest dynamic link libraries R3DLLINS for Windows
Server 2003 on the EXT-Kernel CD in the NTPATCH directory.
o Replace the R/3 kernel with the EXT-Kernel.
If you do not replace it you will get error "SICK" after the first
logon attempt after the start.
In this case, download the disp+work package(s) from the SAP
Service Marketplace at service.sap.com/patches and unpack the
patch(es) to directory usr\sap\exe:
dw*_<patch-level>
Use at least patch level 186.
o Use the latest saposcol version.
This version supports the changed performance counter of Windows
Server 2003 to determine values for ST06 and RZ20.
You can find the latest version in file saposcol_<Patch Level>.CAR.
in the SAP Service Marketplace.
o SAP DB only: See SAP Note 315237.o Compatibility of the Hardware with Windows Server 2003
You can perform the upgrade to Windows Server 2003 only if the
hardware has been explicitly released for this purpose. To check,
do one of the following:
- If the Windows Server 2003 CD is available, check compatibility
with WINNT32.EXE in the \I386 directory. The exact statement
is: <DRIVE:>\I386\WINNT32 /CHECKUPGRADEONLY. The result is
stored as text file WINNT32.LOC in the present Windows
directory (e.g. C:\WINNT).
- The hardware has successfully passed SAP hardware certification
(http://www.addon.de).
- The hardware is contained in the Microsoft Hardware
Compatibility List (http://www.microsoft.com/hcl).
- The hardware has been released for Windows Server 2003 by the
manufacturer. This information is published on the
corresponding website.
o Kerberos Single Sign-On
When the SAP system is installed on Windows Server 2003 you can
setup the Kerberos Single Sign-On. If you use the kerberos protocol
the information exchanged between the SAP frontend and the
application server for authentication is encrypted.
The procedure for setting up Single Sign-On is described in all
recent installation guides which you can download from the SAP
Service Marketplace at: service.sap.com/instguides.
o SAP domain under Windows Server 2003
Follow the instructions of the Windows documentation for the
migration of a Windows NT 4 domain to Windows 2003. For the SAP
environment some additional points need to be observed.
For Windows NT 4 there are two models for the SAP system domain:
- Single domain
All users and the SAP system build one single domain. This
domain can be migrated to Windows Server 2003 and exist there
as single domain.
- Additional domain
There is one domain for the users and a second domain for the
SAP system(s). For a migration to Windows Server 2003 the SAP
system domain has to be created as child domain under the user
domain. A "Top-down" procedure is to be used. The higher domain
(the user domain) must be migrated prior to the SAP child
domain. If the user and SAP domain is part of a larger domain
structure the complete domain structure for Windows Server 2003
needs to be planned in a preparing phase. Usually, the
structure created under Windows NT 4 has to be re-arranged and
consolidated.
The name space of the root domain and all sub-ordinated domains
has to be defined and the distribution of the DNS services
needs to be determined.
Note the following:
The SAP domain has to be created as child domain.
The SAP domain must not be converted into an organizational
unit (OU). OUs are not supported by R3SETUP and R3up.
in it nowhere it is mentioned about system copy so plz suggest.

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

Not showing company list after installing B1 2007 on windows 2003 standard

Hi gurus,
I am facing a problem regarding B1.System not showing company list after installing B1 2007 on windows 2003 standard edition.
Plz help me.
Thanks in advance
Regds
Maddy

Hi Maddy,
Please tell me did u upgrade from 2005 to 2007 or u performed a new installation of 2007???
Vasu Natari.

Sun X4150 Can not install Microsoft Window 2003 Standard 32-bit OS

I have try to install Microsoft Window 2003 Standard 32-bit OS in X4150,but put the OS Media and the output show below error messages
"The system is not a supported platform"
I check the sun system handbook and releated document for this X4150 product,it have been certificated.
I try to install with Window 2003 Standard 64-bit OS,it work ok.The Window 2003 Enterprise 32/64 bit,it work ok also.
Have change the CPU Speed (lower),Update the BIOS,ELOM,the same situration.
Have anyone have this experience with the installation of window 2003 Standard 32-bit.
Tks for your help.

Hi,
Have you tried installing using the Sun Installation Assistant disc, for more info see the Sun Installation Assistant for Windows and Linux User's Guide:
http://docs.sun.com/app/docs/coll/x4150

Windows 2003 Standard-Network Password-never had to enter before

I am on a server at my office. My individual workstation is Win 7. The server is Windows 2003 Standard. Yesterday, I lost connectivity to the net work drives, and my computer is asking for a username and password to get into the server.
I did not do anything with intention....make changes.or install any new software. My IT person does not know how to resolve this problem and can not access the server.
Does anyone here have suggestions how to fix this?
AnnetteG

The server may need to be rebuilt. You can try an in-place upgrade. Integrate service pack, then do the in-place upgrade.
http://support.microsoft.com/kb/816579
http://support.microsoft.com/kb/950349
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Logon failure after upgrade Windows 2003 domain functional level and schema

Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!

OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM

PC Netlink 2.0 and Windows 2003 Standard Edition

Does anyone know if a Windows 2003 Standard Edition Server can be added as a Domain Member Server to a PC Netlink 2.0 domain?
When I try to join the domain I receive the message;
"The following error occurred attempting to join the domain "DomainName":<br />
<br />
The remote procedure call failed and did not execute."
Thanks
Peter

I have the same Problem; no solution yet.
Accroding to Sun Support Doc # 72542.
PC Netlink is based on NT 4.0 Server.
At the highest level it implements NT 4.0 protocols.
.NET clients, such as Windows 2003, implement a different protocol.

In-place "member server" upgrade Windows 2003 to Windows 2008

Hi All
My scenario is to do an inplace upgrade from Windows Server Standard 2003 32bit to 2008 Standard 32bit. This server is a "member server" no AD/DC. Are there any particualr pre configuration i need to do to the server? There is
alot of info. with upgrading a DC but not for a "member server".
Thank you for your time!

Hi,
Regarding the issue here, please see if the below link could help:
Installing Windows Server 2008
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

In place upgrade Windows 2003 to Windows 2008 R2 fails, how to troubleshoot?

Hello,
I'm upgrading in Below is setuterr.log 2014-07-21 15:44:29, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:44:30, Error 2014-07-21 15:47:51, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:53, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:47:55, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:44, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:49, Error 2014-07-21 15:48:53, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:48:56, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:14, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:50:17, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:53:14, Error 2014-07-21 15:57:06, Error place Windows 2003 R2 to Windows 2008 R2 and upgrades rolls back on it's own with no indication for reasoning.
which is full of errors but I can not figure out which specific one is curlpit. Any ideas?
Number of Enumerated Devices = 6[gle=0x00000103]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=00000002x[gle=0x80092004]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
Failed to find driver file path. Error=ffffffffx[gle=0x00000003]
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll] does not exist.[gle=0x00000003]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll, {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
[0x08071d] MIG Mig::CDownlevelOCStore::AddOCsFromManifests: Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man.: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08081e] MIG Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\security-ntlm-lmc.man: XmlException: hResult = 0x0, Line = 18, Position = 31; . void __cdecl UnBCL::XmlDocument::Load(class UnBCL::String *)
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0808fe] MIG Plugin {e0cbf06c-cd8b-4647-bb8a-263b43f0f974}: BthMig: Failed to migrate bthport keys, bailing out
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x08085f] MIG UpgHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, LOAD_WITH_ALTERED_SEARCH_PATH) failed gle=0x7e.[gle=0x0000007e]
[0x080863] MIG UpgHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007e.[gle=0x0000007e]
[0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll, {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
[0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\sankap\NTUSER.DAT; giving up (2).[gle=0x00000003]

Hi,
Most probably these kind of errors pop up if the drivers are not compatible. Do you find any .dmp files under folder C:\$WINDOWS.~BT\Sources ? If so
open it with debugger and check for the affected .sys file name.
Check the DVD media, or try a different media.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/691bb048-f63f-41fd-a152-e502671fb27e/upgrade-to-from-windows-server-2003-r2-x64-to-windows-server-2008-x64-failed-4-times-so-far?forum=winserverMigration
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Upgrade window 2003 to Window 2008 R2 approach (Moss 2007)

I have moss 2007 running window 2003 32 bit (1wfe and 1sql server). There quite a few customization that i dont know about. I need to move it to Window 2008 R2 or higher. Anyone have done this? I need a good approach with less risk and impact. I'll build
a new server in window 2008 R2 so it is not an in-place upgrade. I have Moss 2007 SP2, that will work on Window 2008 R2?

- make sure any/all customizations support 64-bit (for SP2007, this is especially true for iFilters, though occasionally WSP's as well)
- install 64-bit onto new server
- add to existing farm -Do you mean adding this using config wizzard?
- move all services from old server to new server - Do this in central admin? Can i just turn on on new server and leave it still on on the old server?
- redirect DNS
- disconnect old server from farm - Do you mean adding
this using config wizzard?
- disconnect old server from domain
- turn off old server
- celebrate

Upgrading Windows 2003 Ent and Exchange 2000 to SBS?

Hi. I'm wondering the best course of action from a planning standing.
I have a single domain Windows 2003 R2 Enterprise Server. This has VMware 2.0 Server, SQL Server and TFS. The VMware is hosting Exchange 2003 and a second Domain Controller. (yes, not an optimal solution. Fortunately my Dell PowerEdge
with 8 Xeon cores and 16 G's memory has been holding up well).
I'm thinking that the least risky upgrade is to go to SBS 2008 server with Hypervisor. I've read that this is a supported upgrade path. Then drop VMware server.
What would people more experienced than me recommend?

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Problem on installation of windows 2003 Standard Ed. 64 bit with 10 GB RAM

Hi,
I'm trying to install the Oracle 10G R2 on Windows 2003 Server Standard Edition 64 bit on HP machine 64 bit.
My problem is that the Oracle is seeing just 4GB of RAM.
I found some Oracle notes that explain this problem for machine and OS with 32 bit.
Any idea?
Thanks,
Sergio

Are you installing Oracle 32-bit?
(In that case, the process virtual memory addressing is limited to 2^32 = 4GB. Note also it is virtual, not physical memory)
64-bit editions (e.g. for X64) are available from:
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Message was edited by:
orafad

Windows 2003 Standard Edition (Cluster Configuration Storage page)

I am trying to install RAC R2 on windows Server 2003 (Standard Edition). I am using FireWire 800 SIIG to connect to Maxtor OneTouch III External HDD.
When installing cluster Services, i do not see the Cluster Storage Devices. When i go to Computer Management, i see all the partitions of the raw device.
One "Cluster Configuration Storage" page, the Available Disks show no partitions.
Oracle installtion documentation says "On the Cluster Configuration Storage page, identify the disks that you want to use for the Oracle Clusterware files and, optionally, Oracle Cluster File System (OCFS) storage. Highlight each of these disks one at a time and click Edit to open the Specify Disk Configuration page where you define the details for the selected disk"
In my case, i do not see any disks. What am i missing?
Any Thoughts. Please advise
Thanks
-Prasad
Message was edited by:
pinjam

You have a more fundamental problem, Firewire disks will not work for RAC on Windows. The storage needs to be shared, Firewire disks can't be shared on Windows. On Linux, Oracle took the open source firewire driver and modified it to allow more than one host to connect. On Windows the driver is closed source so they can't do that.
I presume you are wanting to try-out RAC on Windows, If so another solution may be to download one of the many iSCSI Servers that are available. Microsoft ship an iSCSI Initiator for Windows, this allows you to share a 'block device' which is what RAC needs - then you can choose your RAC Database storage method of choice, ASM, OCFS, RAW. I prefer ASM

Upgrade windows 2003 standard to 2008 enterprise

Similar Messages

Maybe you are looking for