Upgrade wlc to 7.4.100.60 AP3600 crash
Hi,
I have in a LAB and wlc 5508 with V7.4.100.0 working with 3 lap 1242 and tow 3602, I made the upgrade to the new version 7.4.100.60 the wlc is OK, but the 3600 neve came up, I consol them and was in a "ROMMON"
AP:
I had to upload the image because the ap send an error with the image. then I tried to join the 3600 again with the wlc and when the wlc downloads the new image to the access point, the AP crash again.
Do you know why is this ??
thanks
Hi,
I do not have the crash info, I download the firmware into the wlc again, I try to join the AP and works OK, I think the upgrade in the wlc was kind of corrupt.
Now it is working good.
thanks
Similar Messages
-
Wireless dhcp issue after upgrading WLC to 7.6.100
Hi All,
We have upgraded our controllers to version 7.6.100. After upgrading, the access points also upgraded their version to 15.2(4)JB3. But, the problem is that after this process the APs do not get IP. It stays on this state:
*Sep 26 03:55:36.334: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
The DCHP configuration is OK, since it is working in other two controllers we have and that we are not upgrading untill this issue is solved.
If we connect the APs via console and configure a static IP and controller's IP, the AP registers and works fine. But, the access points are located in 20 remote sites, so we would like to avoid going site by site.
Has anyone suffered this issue and knows how to "recover" those access points?
Thank you very mucho for your help!Hi,
Thank you for your answer conraddaniel.
But, our issue was an error on the DHCP. The DHCP server pool for the APs was configured with lease time infinite (on a Cisco 6500). After capturing the packets and debugging on the AP we realized that the AP were receiving wrong values:
DHCP: Scan: Renewal time: 2147483647
DHCP: Scan: Rebind time: 536870911
So, on the AP debugging we saw:
DHCP: Scan: Renewal time larger than Rebind time
On Cisco documentation:
T1 Timer(Renewal) After a certain portion of the lease time has expired, you attempt to contact the server that initially granted the lease in order to renew the lease so its IP address can still be used.
T2 Timer(Rebinding) If renewal with the original leasing server fails, because, for example, the server was taken offline, then you ideally try to rebind to any active DHCP server and try to extend its current lease with any server that allows it to do so.
These T1 and T2 timers can be any values, but must be less than the IP address lease duration. T1 Timer must be less than T2. Generally T1 is set to 50 percent of the lease duration and T2 is set to 87.5 percent of the lease duration. Use this rule to set T1 and T2 timers.
On the previous version of the WLC, the DHCP was configured in the same way and we confirmed that the APs received same times, but they ignored those wrong values.
The workaround was to modify the lease time of the DHCP pool (1 day). This way, both timers had valid values and the APs accepted the DHCP OFFER. We still do not know why with lease infinite these timers have wrong values (a bug?). -
Wireless Clients can't connect post WLC Upgrade to version 7.4.100.0
Upgraded WLC Flex 7500 controller to: 7.4.100.0
Previous WLC Controller version: 7.2.111.3
After the upgrade, all AP's reported back to the controller and looked like working. We have 50+ branch sites that connect back via Layer 2 to the main office. The main office SSID's were broadcasting and users could connect and get the proper IP's. Users that connected back through FlexConnect AP's couldn't obtain an IP address. The client would authenticate to the WLC and accept the SSID key, but would not get an IP address. I see with the 7.4.100.0 upgrade there are more options for DHCP for each interface, which we don't use interfaces for all sites as we did in the early days, now we make sure the flex connect tab has the vlan identifier in the tab and the traffic goes out the local firewall etc. Each remote site has a Linux based firewall and DHCP server.
Looking for any insight with the 7.4.100.0 upgrade that may cause clients to not connect and obtain an IP address.
We have since back dated our WLC Software to: 7.2.111.3 to allow things to work pre upgrade which everything worked fine.
Any suggestions would be great, we had to upgrade version 7.4.100.0 to support our AP 1602.
Thanks in advance.
MattVerify that you have an upgraded FUS image. Second, make sure your WLAN to vlan mapping on the FlexConnect AP's have the correct vlan mapping. I have seen these change to the default vlan mapping.
Sent from Cisco Technical Support iPhone App -
Wlc 2504 7.4.100 to 7.4.110 upgrade fails
Hello,
I've got a strange behaviour while upgrading my 2504 wlc from 7.4.100 to 7.4.110. I used the gui procedure to transfer the updated aes file to the wlc. The procedure started fine, finished downloading, and then the wlc got completely stuck on "Writing New RTOS to flash" message, all ap loosed connection all clients down, claimings, etc... Then after more than 10 minutes watching my laptop screen I decided to hard reboot the wlc.
Initially I saw the new image booting but, at the end, I finally figured out that the backup image instead booted and the show boot from the controller shows the following:
(Cisco Controller) >show boot
Primary Boot Image............................... 7.4.110.0 (default)
Backup Boot Image................................ 7.4.100.0 (active)
The controller now is working fine with the old image, but I need the upgrade.
What do I have to do now ? I didn't understand what happened.
Thank you for your help
byeUpgrading to Controller Software Release 7.4.100.60
Guidelines and Limitations
• When H-REAP access points that are associated with a controller that has all the 7.0.x software releases that are prior to 7.0.240.0 upgrade to the 7.4.100.60 release, the access points lose their VLAN support configuration if it was enabled. The VLAN mappings revert to the default values of the VLAN of the associated interface. This issue does not occur if you upgrade from 7.0.240.0 or later 7.0.x release to the 7.4.100.60 release.
• While a client sends an HTTP request, the Controller intercepts it for redirection to login page. If the HTTP request intercepted by Controller is fragmented, the Controller drops the packet as the HTTP request does not contain enough information required for redirection.
• We recommend that you install Wireless LAN Controller Field Upgrade Software for Release 1.7.0.0-FUS, which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_1_7_0_0.html.
• If you are using a Cisco 2500 Series controller and you intend to use the Application Visibility and Control (AVC) and NetFlow protocol features, you must install Wireless LAN Controller Field Upgrade Software for Release 1.8.0.0-FUS. This is not required if you are using other controller hardware models. For more information, see http://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_1_8_0_0.html.
• After you upgrade to the 7.4 release, networks that were not affected by the existing preauthentication ACLs might not work because the rules are now enforced. That is, networks with clients configured with static DNS servers might not work unless the static server is defined in the preauthentication ACL.
• On 7500 controllers if FIPS is enabled, the reduced boot options are displayed only after a bootloader upgrade.
Note Bootloader upgrade is not required if FIPS is disabled.
• If you require a downgrade from one release to another, you might lose the configuration from your current release. The workaround is to reload the previous controller configuration files saved on the backup server or to reconfigure the controller.
• It is not possible to directly upgrade to the 7.4.100.60 release from a release that is older than 7.0.98.0.
• You can upgrade or downgrade the controller software only between certain releases. In some instances, you must first install an intermediate release prior to upgrading to software release 7.4.100.60. Table 2 shows the upgrade path that you must follow before downloading software release 7.4.100.60.
For more information :
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74mr1.html#wp976667 -
Upgrade WLC 5508 Ver. 7.0.98.0 to Ver 7.6.110.0
i will upgrade WLC 5508 Ver 7.0.98.0 with License 50 AP. to Ver 7.6.110.0 will it ask to install license ?
No, It will not ask for again.
Just upgrade the software.
Regards
Dont forget to rate helpful posts -
Upgrade WLC 5508 to 7.4.121.0 problem
After I upgraded WLC 5508 from 7.2.111.3 to 7.4.121.0, all 3602i APs don't associate with the controller. All APs were working/associating with controller on 7.2.111.3 at same setting. IP address of APs are setup as DHCP.
The error message is "AP couldn't get IP address".
Any one has this type of problem when you upgrade WLC 5508 from 7.2.111.3 to 7.4.121.0.
Thanks,Hi,
This doesn't look like software issue.
You have to check why the APs are not able to get ip address. Try connecting a PC to a swtich port where one of these APs are connected and see if you are able to get IP on PC.
Also check if the DHCP server is reachable and if there are IP address in the pool assigned for APs.
HTH,
Thanks & Regards,
Ishant
*** Please rate the post if you find it useful *** -
Hi,
How is the correct steps for the upgrade of the WLC4400 from a version 4.1 to 4.2 version?
I backup the configuration running in the version 4.1.
I download, and put the file of the Software 4.2 in the TFTP directory.
I start the transfer from the TFTP to WLC.
The copy was succesfull.
I restart the WLC and Save the config.
But, the WLC lost the configuration (running the version 4.2), I connect to the console port and this showed the Wizard to start the initial configuration :S
What is the correct steps to upgrade WLC.Hi Ricardo,
This is a good doc with Step by Step info
Wireless LAN Controller (WLC) Software Upgrade
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml
Cheers!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727 -
Am I the only one experiencing battery drain with the 6.1.3 upgrade? It went from 100% to 63% in 7 hours WITH NO USE! I've had worse luck with the i5 than the i4. This is the first time I regret being in a two year contract. I might add that this is my 3rd i5
So now 12 days later and another replacement I'm still having issues and apple still isn't helping. My phone has started shutting off unexpectedly again today. Does anyone have any suggestions on where to go from here?
<Edited by Host> -
After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic
After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic (happens every 20 minutes or so). Please help me with this, it's getting very frustrating. Have tried disk utility, there were errors (file system was corrupted), the disk utility managed to repair the disk but the crashes continue.
Etre-check:
EtreCheck version: 1.9.12 (48)
Report generated 26 juli 2014 12:29:37 CEST
Hardware Information:
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:14:20
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Iomega Iomega 500,11 GB
EFI (disk1s1) <not mounted>: 209,7 MB
IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (499,32 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
[not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
[loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
[not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.2.12) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
StartOuc: Path: /Library/StartupItems/StartOuc
VirtualBox: Path: /Library/StartupItems/VirtualBox
wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.fortinet.forticlient.appfw.plist Support
[running] com.fortinet.forticlient.epctrl.plist Support
[running] com.fortinet.forticlient.fmon.plist Support
[running] com.fortinet.forticlient.servctl.plist Support
[loaded] com.fortinet.forticlient.vpn.plist Support
[running] com.fortinet.forticlient.wf.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[failed] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
FIREBOX Control
iTunesHelper
Dropbox
Emil
NIHardwareAgent
FortiClientAgent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.1.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix online plug-in Support
Flash Player Support
Native Instruments USB Audio Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 148.25 GB Disk used: 124.04 GB
Destinations:
IOMEGA [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 124.04 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
8% mds_stores
4% com.apple.WebKit.WebContent
2% Safari
1% WindowServer
1% diskimages-helper
Top Processes by Memory:
190 MB mds_stores
106 MB com.apple.WebKit.WebContent
98 MB Safari
90 MB com.apple.IconServicesAgent
82 MB Dropbox
Virtual Memory Information:
4.64 GB Free RAM
1.52 GB Active RAM
947 MB Inactive RAM
684 MB Wired RAM
1.20 GB Page-ins
0 B Page-outsHi, thanks for the reply. I deleted some of the old stuff that showed up on the report (have removed virtual box long ago but some residual files were apparently left). It didn't help though. Will remove forticlient too as a test.
Meanwhile here's the new etre-check and crash report:
last crash:
Anonymous UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Sat Jul 26 13:21:42 2014
panic(cpu 1 caller 0xffffff801a2dc24e): Kernel trap at 0xffffff801a5e2e49, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef811ca9bea0, CR3: 0x000000004274c000, CR4: 0x0000000000000660
RAX: 0x0000000000000100, RBX: 0xffffff802dd897b0, RCX: 0x00000000e7b76fff, RDX: 0x0000000018489000
RSP: 0xffffff811ca9be00, RBP: 0xffffff811ca9be00, RSI: 0xffffff8115e0d068, RDI: 0xffffef811ca9be80
R8: 0xffffff8115d9d078, R9: 0xffffff8115e0d068, R10: 0xffffff811ca9bb90, R11: 0x0000000000000246
R12: 0x0000000000000000, R13: 0xffffff801a7693d1, R14: 0xffffef811ca9be80, R15: 0x0000000000000000
RFL: 0x0000000000010282, RIP: 0xffffff801a5e2e49, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef811ca9bea0, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff811ca9ba90 : 0xffffff801a222f79
0xffffff811ca9bb10 : 0xffffff801a2dc24e
0xffffff811ca9bce0 : 0xffffff801a2f3746
0xffffff811ca9bd00 : 0xffffff801a5e2e49
0xffffff811ca9be00 : 0xffffff801a5f6733
0xffffff811ca9be60 : 0xffffff801a5f20be
0xffffff811ca9bf00 : 0xffffff801a5f1ecf
0xffffff811ca9bf60 : 0xffffff801a640777
0xffffff811ca9bfb0 : 0xffffff801a2f3c38
BSD process name corresponding to current thread: dbfseventsd
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000001a000000
Kernel text base: 0xffffff801a200000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 3901629665348
last loaded kext at 3718616795316: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f9c773000, size 49152)
last unloaded kext at 3844885002402: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f9c658000, size 16384)
loaded kexts:
com.fortinet.fct.kext.avkern 1.0.1
com.fortinet.fct.kext.fctwfnke 1.0
org.virtualbox.kext.VBoxUSB 4.2.12
org.virtualbox.kext.VBoxDrv 4.2.12
com.apple.filesystems.smbfs 2.0.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.28
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 160,04 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Iomega
USB Device: Built-in iSight
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:
new etre check:
EtreCheck version: 1.9.12 (48)
Report generated 26 juli 2014 13:24:10 CEST
Hardware Information:
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:3:27
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Iomega Iomega 500,11 GB
EFI (disk1s1) <not mounted>: 209,7 MB
IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (498,79 GB free)
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
[not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
[loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
[not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.fortinet.forticlient.appfw.plist Support
[running] com.fortinet.forticlient.epctrl.plist Support
[running] com.fortinet.forticlient.fmon.plist Support
[running] com.fortinet.forticlient.servctl.plist Support
[loaded] com.fortinet.forticlient.vpn.plist Support
[running] com.fortinet.forticlient.wf.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[running] com.spotify.webhelper.plist Support
User Login Items:
Dropbox
Emil
NIHardwareAgent
FortiClientAgent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.1.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix online plug-in Support
Flash Player Support
Native Instruments USB Audio Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 148.25 GB Disk used: 123.36 GB
Destinations:
IOMEGA [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 123.36 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
4% mds
4% WindowServer
3% Mail
3% backupd
1% mdworker
Top Processes by Memory:
98 MB com.apple.IconServicesAgent
82 MB Dropbox
74 MB Mail
41 MB WindowServer
41 MB Dock
Virtual Memory Information:
5.66 GB Free RAM
1.17 GB Active RAM
346 MB Inactive RAM
603 MB Wired RAM
318 MB Page-ins
0 B Page-outs -
Upgraded to iPhoto 9 and now it is crashing every few minutes
I installed iLife and upgraded to iPhoto 9, now my iPhoto keeps crashing. Does anyone have any idea how to fix this?! (Also, I can't see any of the thumbnails for my photos, they are just empty boxes--yet if you right click and choose Show File it brings you to the jpg)
The crash report is:
Process: iPhoto [2006]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: 8.1 (8.1)
Build Info: iPhotoProject-4150000~4
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2010-07-02 19:27:15.458 -0500
OS Version: Mac OS X 10.6.3 (10D575)
Report Version: 6
Interval Since Last Report: 3012 sec
Crashes Since Last Report: 4
Per-App Interval Since Last Report: 2845 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: 6C8BA800-0502-429B-A22A-96D4F6C5767C
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000084010000
Crashed Thread: 11
Thread 0: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x95c992fa machmsgtrap + 10
1 libSystem.B.dylib 0x95c99a67 mach_msg + 68
2 com.apple.CoreFoundation 0x948c700f __CFRunLoopRun + 2079
3 com.apple.CoreFoundation 0x948c60f4 CFRunLoopRunSpecific + 452
4 com.apple.CoreFoundation 0x948c5f21 CFRunLoopRunInMode + 97
5 com.apple.HIToolbox 0x96a420fc RunCurrentEventLoopInMode + 392
6 com.apple.HIToolbox 0x96a41eb1 ReceiveNextEventCommon + 354
7 com.apple.HIToolbox 0x96a41d36 BlockUntilNextEventMatchingListInMode + 81
8 com.apple.AppKit 0x91540135 _DPSNextEvent + 847
9 com.apple.AppKit 0x9153f976 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 156
10 com.apple.AppKit 0x91501bef -[NSApplication run] + 821
11 com.apple.AppKit 0x914f9c85 NSApplicationMain + 574
12 com.apple.iPhoto 0x00123e6a 0x1000 + 1191530
13 com.apple.iPhoto 0x0000354e 0x1000 + 9550
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x95cbfb42 kevent + 10
1 libSystem.B.dylib 0x95cc025c dispatch_mgrinvoke + 215
2 libSystem.B.dylib 0x95cbf719 dispatch_queueinvoke + 163
3 libSystem.B.dylib 0x95cbf4be dispatch_workerthread2 + 240
4 libSystem.B.dylib 0x95cbef41 pthreadwqthread + 390
5 libSystem.B.dylib 0x95cbed86 start_wqthread + 30
Thread 2:
0 libSystem.B.dylib 0x95c9935a semaphoretimedwait_signaltrap + 10
1 libSystem.B.dylib 0x95cc6ea1 pthread_condwait + 1066
2 libSystem.B.dylib 0x95cf5a28 pthreadcond_timedwait_relativenp + 47
3 com.apple.Foundation 0x99212a88 -[NSCondition waitUntilDate:] + 453
4 com.apple.Foundation 0x991cb7f9 -[NSConditionLock lockWhenCondition:beforeDate:] + 279
5 com.apple.Foundation 0x991cb6dc -[NSConditionLock lockWhenCondition:] + 69
6 com.apple.proxtcore 0x00f6a201 -[XTMsgQueue waitForMessage] + 49
7 com.apple.proxtcore 0x00f58363 -[XTThread run:] + 387
8 com.apple.Foundation 0x991d68dc -[NSThread main] + 45
9 com.apple.Foundation 0x991d688c _NSThread__main_ + 1499
10 libSystem.B.dylib 0x95cc6a19 pthreadstart + 345
11 libSystem.B.dylib 0x95cc689e thread_start + 34Welcome to the Apple Discussions. First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and see if you still crash.
If necessary backup and launch iPhoto with the Command+Option keys depressed to rebuild the library. Select the last three options.
Click to view full size
OT -
After upgrading to Lion, ITunes will not open without crashing.
Upgraded the MacBook to Lion and now ITunes crashes everytime I try to open it. It gives an unknown error message (-45054). any ideas?
DaveMake sure you've installed all of the available OS X Lion and iTunes updates.
If you aren't sure how to update, see this -> OS X: Updating OS X and Mac App Store apps -
I originally bought Acrobat 9 and later upgraded to Acrobat 10 pro. My computer crashed and I am trying to re-install Acrobat 10 pro. I have serial numbers for Acrobat 9 and an Acrobat 10 pro upgrade. What do I do?
Hi Shane,
Please download Acrobat X Pro from the link below.
http://www.adobe.com/downloads/other-downloads.html
Install the software and when prompted for the previous version qualifying product, select Acrobat 9 and enter the serial key of Acrobat 9.
This should install and activate Acrobat X Pro on the machine.
Regards,
Anand -
Flash Plug in is crashing after recent upgrade. I tried uninstalling, and reinstalling, still crashing. Firefox and Plug-in are current. What else can I do?
What I suggest you do here is to use Adobe's uninstaller tool to uninstall Flash first of all: http://kb2.adobe.com/cps/141/tn_14157.html
Then reboot, go to http://get.adobe.com/flashplayer/ and reinstall it.
I notice too that you have an outdated version of Shockwave For Director. You can update that via http://get.adobe.com/shockwave/ -
HT1338 problems with OS X Lion. I upgraded and now my macbook pro has been crashing...
I am having problems with OS X Lion. I upgraded and now my macbook pro has been crashing... what's going on? and someone please help !!!!
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Hi
I wan to upgrade the IOS version on WLC 5508, but I do not is recommended,
Can you help me is recommended upgrade for this version?.
The apple devices have a problem with retry authentication constantly
regardsAfter WLC upgrade to 8.0.100 [ not in HA mode], the AP seem to be dropping out and reconnect using the fallback to IP- inspite of the statically configured IP on the AP
Running Outdoor mesh AIR-CAP1552E-N-K9 on WLC 5508
(Cisco Controller) >show boot
Primary Boot Image............................... 8.0.100.0 (default) (active)
Backup Boot Image................................ 7.6.101.2
=========
Last AP disconnect details
- Reason for last AP connection failure.................... The AP has been reset by the controller
- Last AP disconnect reason................................ Unknown failure reason
Last join error summary
- Type of error that occurred last......................... Lwapp join request rejected
- Reason for error that occurred last...................... No Mwar payload found in join request
- Time at which the last join error occurred............... Dec 03 00:05:26.114
AP disconnect details
- Reason for last AP connection failure.................... The AP has been reset by the controller
Maybe you are looking for
-
User logon history date and time details
Hi, can any tell me the user logon history tables, as usr02 is only having the present log on details
-
Keyword Containing Count Missing in LR3
In LR2 the keywords panel shows a count for the parent keywords, in LR3 this seems to be missing. For example I have a New Zealand keyword tag under Country which has a count of 17. Below this NZ keyword are North Island and South Island with counts
-
About 2-3 days ago, I tried installing an app on my iPod touch. The download isn't paused, and it isn't completed yet. It won't delete. It's stuck on the icon that looks like a target but has the lines through it. And I have the app iPhoto which rece
-
My cc apps won't install on my mac?
Illustrator cc and Photoshop cc are updated on the creative cloud thingy, but it wont install on my mac. What should I do?
-
Help, I tell you this is ridiculous can't anything be easy anymore. I updated my imac to snow leopard and you tube was working. Apple required a software update, so I continued and now my Adobe flash player doesn't work anymore. I get a blocked error