Upgrade WLS 8.1 to SP3

Hi all,
it seems there is no way to download only the SP3 for an WLS 8.1 (not SP2) upgrade. What is the preferred way to upgrade the 8.1 installation (the machines do not have direct internet access) ?
Thanks,
Mike

The upgrade installer for 81sp3 allows you to upgrade from all prior versions of 81 (GA or SP2). Upgrade installers are only available from the bea support site (not on the main download page).

Similar Messages

  • Upgrading of WLS 6.1 from SP3 to SP5

    Can anyone help me.
    I am going to upgrade WLS 6.1 from SP3 to SP5.
    How can i do this ?
    From where do i download the ServicePack (SP5) ?
    Is there someting i have to be aware off, about the license ?

    Hi Paul
    This is a JVM bug, Upgrade to 1.3.1_08 jvm from sun
    Contact weblogic support for temporary workaround
    Paul Wilson wrote:
    We've a client running 6.1 sp2 on Solaris, who is experiencing
    Weblogic hanging for roughly 10 minutes at a time. On resumption they
    get:
    ####<06-May-03 16:28:50 BST> <Critical> <WebLogicServer> <edox>
    <Mendel> <ListenThread> <system> <> <000204> <Failed to listen on port
    80, failure count: 1, failing for 1,052,234,928 seconds,
    java.net.SocketException: Software caused connection abort>
    ####<06-May-03 16:28:51 BST> <Notice> <WebLogicServer> <edox> <Mendel>
    <ListenThread> <system> <> <000205> <After having failed to listen,
    the server is now listening on port 80>
    The last time it occurred, I got them to take a thread dump and all
    but one execution thread and the listener threads were idle. One
    execution thread was busy reloading (or loading) a class from the war.
    I've asked them to ensure that the reload period is -1, but that
    shouldn't cause a 10 minute hang; plus nothing had changed. Red
    herring?
    As an experiment I wrote a servlet that just blocks its execution
    thread: after about a thousand calls to this on our dev box, we get
    <May 14, 2003 5:45:42 PM BST> <Critical> <WebLogicServer> <Failed to
    listen on port 6001, failure count: 3, failing for 1,052,930,739
    seconds, java.net.SocketException: Too many open files>
    AFAIK this means that we've run out of file descriptors. Our client
    doesn't get this, so I don't think that is happening to them.
    A number of people on weblogic.* groups reported similar problems
    about a year ago, but without any really definitive resolutions.
    Anyone solved this, even by upgrading?

  • Upgrade Exchange 2007 sp1 to sp3

    Good day,
    I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
    that -  "    Organization Checks              ......................... FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Hub Transport Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Client Access Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Mailbox Role Checks              ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
    My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
    Regards,
    Brian

    Good day,
    I have 3 exchange 2007 sp1 servers in my domain in different subnets. I need to upgrade all of them to sp3. i started with one branch server that is not in the same site with the domain schema master and im getting errors during instalation preparations
    that -  "    Organization Checks              ......................... FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Hub Transport Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Client Access Role Checks        ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
        Mailbox Role Checks              ......................... FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have not been created, and setup cannot cre
    ate them because the local computer is not in the same domain and site as the sc
    hema master.  Run setup with the /prepareAD parameter on a computer in the domai
    n toyota and site Default-First-Site-Name, and wait for replication to complete.
    My question is do i need to first upgrade the one in the same site with the scema master? and what will happen to the other remote server in different subnets?? how will i upgrade them given these errors?
    Regards,
    Brian
    Prepare the domains as required. You have to prep the forest first for SP3 before upgrading Exchange itself
    Follow all the instructions
    http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
    Prepare Active Directory and Domains
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Upgrading WLS+ADF to 11.1.1.6: problem with ADF libraries

    Hi,
    I'm upgrading a standalone ADF environment (on RHEL5 64-bit) from 11.1.1.2.0 to 11.1.1.6.0. I followed note 1408663.1 "How to upgrade a WLS domain extended with ADF libraries" so first upgraded WLS to 10.3.6., then uninstalled Application Developer and finally installed the new ADF Runtime.
    When I ran the upgradeJRF command in wlst for my existing domain, I got a listing of 11.1.1.2.0 targets and no mention of 11.1.1.6.0 (no error messages either, though). Starting the servers I'm still seeing deployments such as adf.oracle.domain(1.0,11.1.1.2.0) and adf.oracle.domain.webapp(1.0,11.1.1.2.0). Shouldn't these be 11.1.1.6.0 now? Also tried re-deploying my application, re-built with JDeveloper 11.1.1.6.0, but the library deployments are still on 11.1.1.2.0.
    How can I upgrade the existing domain to 11.1.1.6.0?
    Regards,
    Joonas

    hi Joonas
    Joonas Linkola wrote:
    ...Starting the servers I'm still seeing deployments such as adf.oracle.domain(1.0,11.1.1.2.0) and adf.oracle.domain.webapp(1.0,11.1.1.2.0). Shouldn't these be 11.1.1.6.0 now? ...See also the related ADFEMG JIRA issue ADFEMG-112, "ER 12834041 : ADF RUNTIME LIBRARIES DON'T SHOW THE CORRECT VERSION NUMBERS IN WLS CONFIG.XML"
    at http://java.net/jira/browse/ADFEMG-112
    (or the forum message at Re: ADF Version to be used on a FormsReports 11gR2 install )
    regards
    Jan Vervecken

  • Upgrading XP-Pro SP2 to SP3. Consequences to....

    Hi!
    Upgrading XP-Pro SP2 to SP3. What are the consequences to:
    1]  Recovery Console, especially if installed on your drive? Should it be reinstaled? But it will need a CD with SP3 version of XP.
    2]  Previously created recovery disk. Should it be recreated? If you do, is it actually taking account of SP3?
    3]  Can the SP3 upgrade be slipstreamed as SP1 and SP2, creating a SP3 version of XP?
    There are more questions, but this are the most important.
    Thanks for your interest.
    Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

    ANSWERS TO MY QUESTIONS WITH XP-SP3 RELEASED AND INSTALLED, FOR THE BENEFIT OF MEMBERS.
    1] The Recovery console should be reinstalled after the SP3 upgrade, but....
    2] you must create first a slipstream CD of XP PRO SP3, which can certainly be done, 
    3} following previously issue procedure by MS, so that it can find the new information.
    In the same vane, you can not slipstream Vista to SP1. MS is suppose to provide it.
    Cheers
    Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

  • WLS not starting with SP3

    I believe I've followed the installation instructions for SP3. However I
    get the error below when trying to start WLS (from the command line using
    'wlserver.exe'). I've added weblogic510sp3boot.jar to the beginning of
    CLASSPATH and have added weblogic510sp3.jar to the beginning of the WL
    classpath (using wlconfig).
    Any ideas what is going on?
    Thanks,
    Mike
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
    weblog
    ic.boot.ServerClassLoader: method
    getClassLoadNotify()Lweblogic/boot/ClassLoadNo
    tify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:140)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
    (RecursiveReloadOnModifyClassLoader.java:53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
    Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
    ntextImpl.java:1392)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
    l.java:516)
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Comp
    iled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
    getClassLoa
    dNotify()Lweblogic/boot/ClassLoadNotify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:140)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
    (RecursiveReloadOnModifyClassLoader.java:53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
    Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
    ntextImpl.java:1392)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
    l.java:516)
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Comp
    iled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    WebLogic Server terminated with an abnormal condition of 1

    I believe these should be in the weblogic.class.path, not here:
    D:\weblogic\classes;D:\weblogic\lib\weblogicaux.jar;D:\webl
    og
    ic\myserver\clientclasses;D:\weblogic\myserver\serverclasseshttp://www.weblogic.com/docs51/install/startserver.html#1029223
    Thanks,
    Michael
    "John J. Thomas" wrote:
    >
    Mike,
    I'm getting the same error and I can't seem to figure it out?
    JT
    Mike DiChiappari wrote:
    Before anyone reponds that boot.jar is not in the classpath, here is my
    classpath (as printed from the command prompt). I start WLS from the
    command
    line (by typing "wlserver") after typing "setenv.cmd", which sets the
    classpath shown below.
    CLASSPATH=d:\weblogic\lib\weblogic510sp3boot.jar;d:\jdk1.2.2\lib\tools.jar;D
    weblogic\license;D:\weblogic\classes;D:\weblogic\lib\weblogicaux.jar;D:\webl
    og
    ic\myserver\clientclasses;D:\weblogic\myserver\serverclasses
    Mike
    -----Original Message-----
    From: Mike DiChiappari <[email protected]>
    Newsgroups: weblogic.support.install
    Date: Sunday, June 18, 2000 9:17 PM
    Subject: WLS not starting with SP3
    I believe I've followed the installation instructions for SP3. However I
    get the error below when trying to start WLS (from the command line using
    'wlserver.exe'). I've added weblogic510sp3boot.jar to the beginning of
    CLASSPATH and have added weblogic510sp3.jar to the beginning of the WL
    classpath (using wlconfig).
    Any ideas what is going on?
    Thanks,
    Mike
    The WebLogic Server did not start up properly.
    Exception raised: java.lang.reflect.InvocationTargetException
    java.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError:
    weblog
    ic.boot.ServerClassLoader: method
    getClassLoadNotify()Lweblogic/boot/ClassLoadNo
    tify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:140)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
    (RecursiveReloadOnModifyClassLoader.java:53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
    Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
    ntextImpl.java:1392)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
    l.java:516)
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Comp
    iled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method
    getClassLoa
    dNotify()Lweblogic/boot/ClassLoadNotify; not found
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:140)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:112)
    at
    weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoa
    der.java:104)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>
    (RecursiveReloadOnModifyClassLoader.java:53)
    at
    weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$Single
    Slave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
    at
    weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletCo
    ntextImpl.java:1392)
    at
    weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImp
    l.java:516)
    at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java,
    Comp
    iled Code)
    at weblogic.t3.srvr.HttpServer.start(HttpServer.java:442)
    at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
    at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.Server.startServerDynamically(Server.java:99)
    at weblogic.Server.main(Server.java:65)
    at weblogic.Server.main(Server.java:55)
    at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
    at java.lang.Thread.run(Thread.java:479)
    WebLogic Server terminated with an abnormal condition of 1
    Thanks,
    Michael
    -- BEA WebLogic is hiring!
    Check our website: http://www.bea.com/

  • After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working

    Hi,
    We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
    PROBLEM- The following error comes up when we try to access OWA :
    Exception
    Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
    Exception message: Object reference not set to an instance
    of an object.
    Call stack
    Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
    Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
    Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
    Inner Exception
    Exception type: System.NullReferenceException
    Exception message: Object reference not set to an instance
    of an object.
    Call stack
    Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
    Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
    Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
    Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
    ACTION TAKEN SO FAR :
    1. Removed OWA virtual directories and recreated them again.
    2. IIS has been reset.
    3. Restarted the HUB/CAS server.
    4. Created public folder database.
    Even after doing all these activities, owa is still inaccessible. Please help.
    Regards,
    Ankur

    Hi Ankur,
    From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
    If it is a successful upgrading, please follow the steps below for troubleshooting.
    1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
    2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
    3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your 
    https://URL), check "Only redirect" box and Status code Found 302.
    4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Upgrade ZCM 11 SP1a to SP3

    Our zone is currently running ZCM11 SP1a, I'm looking into upgrading to SP3. From the docs I see that primary server cannot be upgraded directly from SP1a to SP3, but agents can be upgraded directly. I will also need to upgrade the server OS (SLES11 SP1), so the entire server upgrade will probably be a several evening affair.
    So there will be an interim period when agent on workstations is SP1a, but server is running SP2 or SP3. Will that cause any problems?

    This should be fine.
    On 6/11/2014 4:36 AM, vatson wrote:
    > but server is running SP2 or SP3. Will that cause any problems?
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Upgrade WLS from 10.3 to 10.3.1

    Hi,
    It's my first time to upgrade an WLS server installation.
    When I upgrade WLS from 10.3 to 10.3.1 where I should install the WLS binaries?
    (same directory than WLS 10.3 or a new one).
    Maybe I missed something in the doc's but in the WLS 10.3.1 upgrade guide I could only find how to upgrade e.g. security provider, domains, .... AFTER installing the binaries.
    regards
    Peter

    Hello Peter,
    I had the same problem.
    According to the install documentation for Forms/Reports you can only extend a domain which was created by the Portal, Form, Reports, Discoverer installer.
    These domain type is called Classic.
    So if you have already a domain which is still empty, remove it and create a ClassicDomain with the Forms/Reports installer.
    If your existing domain is not empty you have to create a second domain of type Classic
    Kind regards
    Juergen

  • Upgrading WL6.1 SP2 to SP3

    hi all
    i would like to know what is the ways of upgrading the WL from SP2 to SP3
    i have installed WL6.1 SP2 on my solaris station and i want to upgrade it to SP3
    is there a way of upgrading rather then installing new WL.
    thanks in advance
    shlomit

    Shlomit <[email protected]> wrote:
    i have installed WL6.1 SP2 on my solaris station and i want to upgrade it to SP3.
    Is there a way of upgrading rather than installing new WL? Shlomit,
    Sure. Go to bea.com, download service pack 3, install as follows:
    $ /opt/bea/jdk131/bin/java -cp wls61sp3_upgrade_generic.zip install -i console
    Preparing CONSOLE Mode Installation...
    ===============================================================================
    Choose Locale...
    ->1- English
    CHOOSE LOCALE BY NUMBER: 1
    ===============================================================================
    WebLogic Server 6.1 Service Pack 2 (created with InstallAnywhere by Zero G)
    ===============================================================================
    Introduction
    This installer will guide you through the installation of Service Pack 3 of
    WebLogic Server 6.1. Use command "next" to proceed to the next screen. If you
    want to change something in a previous screen, use command "previous" or
    "back". You may quit the installer at any time by using the command the
    "quit".
    PRESS <ENTER> TO CONTINUE:
    ===============================================================================
    Choose BEA Home Directory
    1- /opt/bea
    Existing BEA Home: 1
    ===============================================================================
    Installing...
    [==================|==================|==================|==================]
    [------------------|------------------|------------------|------------------]
    ===============================================================================
    Install Complete
    Congratulations! The installation of Service Pack 3
    for WebLogic Server 6.1 is complete.
    The installer has saved copies of files which you may have modified to:
    /opt/bea/wls/servicepacks/sp3/backup
    Press "Enter" to quit the installer:
    $
    Then, to verify...
    MBean reports:
    WebLogic Server 6.1 SP3 (...etc...)
    Let me know if you need more assistance.
    Brian J. Mitchell
    BEA Systems Administrator
    TRX
    Atlanta, GA
    email: [email protected]
    office: 404-327-7238
    mobile: 678-283-6530

  • Upgrade service error after ZFD3 SP3 to ZFD4.01 upgrade

    Hi,
    Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
    documentation instructions I still get the following error on the Inventory
    Service startup screen:
    "The Upgrade Service is migrating the schema
    An error has occurred. The upgrade service is exiting now."
    The Inv Srv object Server Status log says:
    "1178: An error occured while performing the DBSchema migration
    1177: Unable to complete all the operations, the upgrade service is exiting
    with errors.
    106: The Storer succesfully connected to the database
    108:the database in not initialized as it is being upgraded"
    All of these errors on the support site have as a fix either restart the
    Inventory Service or contact Novell.
    I've spent some hours now looking for a fix on Knowledgebase and in the Zen
    forums but can't find anything useful. This is the second time I've run the
    upgrade and this problem has occurred. I've reinstalled Zen3.2 from scratch,
    applied SP1 and SP3.
    I've checked policies and database objects, all appears as it should be.
    These seem to be the relevant errors from the log files:
    Migration Log:
    Migration Exception Message->Could not add the dbspace..ASA Error -121:
    Permission denied: unable to create the dbspace file "CIM10",
    SQLState->42501, ErrorCode->262
    Zenworksinvservice log file:
    [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
    in AlterProcedure
    [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
    SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    again
    See full logs below.
    Is there no option but to go straight to Novell?
    Regards,
    Steve Law
    zenworksinvservice-041202123653303.txt
    [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:53.349] ZENInv - Service Loader:
    getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
    Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
    [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS returnedtrue
    [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service start
    is pending...
    [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:53.827] ZENInv - Server Config:
    getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case Ignore
    String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
    zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
    [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
    [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy DN
    is CN=Zen32 Server Package:General:ZENworks
    Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:54.918] ZENInv - Server Config:
    getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
    Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
    [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN: Attributes
    of:
    [12/2/04 12:36:55.001] ZENInv - Server Config:
    getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
    zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
    zendbdatabasetype=zendbDatabaseType: Integer 0,
    zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
    Case Ignore String
    jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
    zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
    com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
    CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address: 13;20;,
    zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
    sybase:, zendbjdbcport=zendbJDBCPort: 2638}
    [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS returnedtrue
    [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
    started...
    [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service start
    is pending...
    [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
    getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
    >
    [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS returnedtrue
    [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
    fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From 00:00:00
    To 22:55:00 (Randomly dispatch during time period)
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned: true
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
    [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
    started...
    [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
    Attributes of:
    [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
    getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
    12 0}
    [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
    returnedtrue
    [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
    zenInvComponentStatus = 4.0 12 0
    [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
    zenInvComponentStatus = 4.0 12 0
    [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
    [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
    'ServiceStatusChangeListener' invoked
    [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true) failed
    in AlterProcedure
    [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:04.881] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
    "- l, "Tw s, "Ty T, "T j, "T-
    l, " s, " T, "6 j, "9Y l}
    [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:04.984] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-O j,
    "- l, "Tw s, "Ty T, "T j, "T-
    l, " s, " T, "6 j, "9Y l}
    [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.277] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified records
    are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or ZFS3.0
    SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    again
    [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.358] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.435] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "- l,
    "Tw s, "Ty T, "T j, "T- l, "
    s, " T, "6 j, "9Y l, "~; s}
    [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:05.738] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified records
    are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, Running EnumModifier in integrated mode with
    upgradeService
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
    [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables,
    dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbType:0
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbUser:MW_DBA
    [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    modifyEnumTables, dbPasswd:novell
    [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
    [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
    Successfully
    [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
    [12/2/04 12:37:07.067] ZENInv - Storer: Start with
    'ServiceStatusChangeListener' invoked
    [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
    [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
    HashTable
    [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from ServiceObject
    [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
    [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
    ServiceObject
    [12/2/04 12:37:17.014] ZENInv - Selector:
    InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
    [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from ServiceObject
    [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
    [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
    Invoked
    [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
    Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
    DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check wether
    this is a directory or File
    [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user: MW_DBA
    driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds: port:
    2638
    [12/2/04 12:37:17.024] ZENInv - Selector: Directory
    ExistsDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
    ConfirmedDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
    DATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
    [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
    [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable From
    Serialized File
    [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
    FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
    jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
    [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
    CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
    [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
    HashTable
    [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully From
    Serialized File
    [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
    ServiceObject
    [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
    ServiceObject
    [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
    ServiceObject
    [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
    ServiceObject
    [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
    DATA:\Zenworks\ScanDir\conv\
    [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether this
    is a directory or File
    [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
    [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
    [12/2/04 12:37:17.045] ZENInv - Selector:
    [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
    Object
    [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
    Object
    [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
    Synch Object
    [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties file
    [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
    [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
    FileServiceController: Startup Properties: {chunksize=4096,
    lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
    tory, lockseed=ScanSelectorLock, transfers=100,
    rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
    servicename=zenInvScanCollector, portnumber=0}
    [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor, String[])
    not found in
    'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
    [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
    started
    [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW SyncServiceTable
    Constructor Invoked
    [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
    Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
    DATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
    exists. Check wether this is a directory or File
    [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
    ExistsDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory Existence
    ConfirmedDATA:\Zenworks\ScanDir\stable\
    [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
    Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
    [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
    SyncServiceTable
    [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
    existing SyncServiceTable
    [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written into
    XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:18.520] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
    are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
    Attributes of:
    [12/2/04 12:37:18.595] ZENInv - Status Reporting:
    getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw s,
    "Ty T, "T j, "T- l, " s, "
    T, "6 j, "9Y l, "~; s, "s? T}
    [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
    DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
    returnedtrue
    Migration Log
    Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
    Unzipping the file migrate.zip
    Transforming the Migration SQL files...
    ...3
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
    is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nPotsModem_1 is done with 545 0x03010c0a010202
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nOperatingSystem_2 is done with 143 0x03010e02
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nNetworkAdapter_3 is done with 544 0x03010c0b04
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    nDiskDrive_4 is done with 543 0x03010c080301
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
    nOperatingSystem_5 is done with 547 0x03010e0201
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
    deoadapter_6 is done with 53 0x03010c030c0201
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
    stemInfo_7 is done with 228 0x03020404
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
    undadapter_8 is done with 546 0x03010c16
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
    therboard_9 is done with 221 0x0302040101
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
    gicalDiskDrive_10 is done with 113 0x03010c110402
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    ventoryscanner_11 is done with 181 0x03011402
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    stalleddriver_12 is done with 548 0x2701
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
    stalledDirectory_13 is done with 551 0x4a
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
    s_14 is done with 35 0x03010c0301
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
    os_15 is done with 180 0x0301140101
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    CurrentLoginUser_16 is done with 549 0x48
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    LastLoginUser_17 is done with 550 0x49
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    User_18 is done with 205 0x03011a
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19 is
    copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
    0 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
    _21 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
    _22 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
    23 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
    or_24 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
    twareOperatingSystem_24 is done with 142 0x03010e01
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
    26 is copied
    \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30 is
    copied
    Starting Schema Migration
    Adding the extra db spaces...
    SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
    has the results
    File_NAME=mgmtdb9.db
    dbfile's base directory =
    SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
    CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
    Totaltime taken for Schema Migration : 149
    Migration Exception Message->Could not add the dbspace..ASA Error -121:
    Permission denied: unable to create the dbspace file "CIM10",
    SQLState->42501, ErrorCode->262

    I am getting identical errors with NW6.5 SP3, edir 8.7.3.6 upgrading from
    ZFD4.01 to ZFD6.5. Haven't found any knowledgebase items on it.
    Thanks,
    Doug Streit
    > Extra info: this is a NW6.5 SP2 server with edir 8.7.3.3, Sybase database.
    >
    > "SLaw" <[email protected]> wrote in message
    > news:[email protected]...
    > > Hi,
    > >
    > > Having upgraded from ZFD3.2 SP3 to ZFD4.01 and carefully following the
    > > documentation instructions I still get the following error on the
    > Inventory
    > > Service startup screen:
    > >
    > > "The Upgrade Service is migrating the schema
    > > An error has occurred. The upgrade service is exiting now."
    > >
    > > The Inv Srv object Server Status log says:
    > >
    > > "1178: An error occured while performing the DBSchema migration
    > > 1177: Unable to complete all the operations, the upgrade service is
    > exiting
    > > with errors.
    > > 106: The Storer succesfully connected to the database
    > > 108:the database in not initialized as it is being upgraded"
    > >
    > > All of these errors on the support site have as a fix either restart the
    > > Inventory Service or contact Novell.
    > >
    > > I've spent some hours now looking for a fix on Knowledgebase and in the
    > Zen
    > > forums but can't find anything useful. This is the second time I've run
    > the
    > > upgrade and this problem has occurred. I've reinstalled Zen3.2 from
    > scratch,
    > > applied SP1 and SP3.
    > > I've checked policies and database objects, all appears as it should be.
    > >
    > >
    > > These seem to be the relevant errors from the log files:
    > >
    > > Migration Log:
    > > Migration Exception Message->Could not add the dbspace..ASA Error -121:
    > > Permission denied: unable to create the dbspace file "CIM10",
    > > SQLState->42501, ErrorCode->262
    > >
    > > Zenworksinvservice log file:
    > > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
    > failed
    > > in AlterProcedure
    > > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
    > ZFS3.0
    > > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    > > again
    > >
    > > See full logs below.
    > >
    > > Is there no option but to go straight to Novell?
    > >
    > > Regards,
    > >
    > >
    > > Steve Law
    > >
    > > zenworksinvservice-041202123653303.txt
    > > *********************************
    > > [12/2/04 12:36:53.280] ZENInv - Service Loader: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:53.349] ZENInv - Service Loader:
    > > getAttributes:Attributes={zeninvhostserver=zeninvH ostServer: Distinguished
    > > Name CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, zeninvrole=zeninvRole: Integer 25}
    > > [12/2/04 12:36:53.358] ZENInv - Service Loader: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:53.725] ZENInv - Server Config: The severconfig service
    > start
    > > is pending...
    > > [12/2/04 12:36:53.784] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:53.827] ZENInv - Server Config:
    > > getAttributes:Attributes={zeninvscanfilepath=zenin vScanFilePath: Case
    > Ignore
    > > String \\SERVER1\DATA\Zenworks\ScanDir, zeninvrole=zeninvRole: Integer 25,
    > > zeninvcomponentstatus=zeninvComponentStatus: 4.0 12 0}
    > > [12/2/04 12:36:53.832] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:53.838] ZENInv - Server Config: Getting Cascade INit time
    > > [12/2/04 12:36:54.844] ZENInv - Server Config: Database Location Policy
    > DN
    > > is CN=Zen32 Server Package:General:ZENworks
    > > Database.OU=Policies.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:36:54.887] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:54.918] ZENInv - Server Config:
    > > getAttributes:Attributes={zenlocdatabaseobject=zen locDatabaseObject:
    > > Distinguished Name CN=SERVER1_invDatabase.OU=BMO.OU=UK.O=OURTREE}
    > > [12/2/04 12:36:54.923] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:54.967] ZENInv - Server Config: getAttributesofDN:
    > Attributes
    > > of:
    > > [12/2/04 12:36:55.001] ZENInv - Server Config:
    > > getAttributes:Attributes={zendbpassword=zendbPassw ord: novell,
    > > zendbjdbcprotocol=zendbJDBCProtocol: jdbc:,
    > > zendbdatabasetype=zendbDatabaseType: Integer 0,
    > > zendbjdbcsidservice=zendbJDBCSIDService: 11.32.25.98, zendburl=zendbURL:
    > > Case Ignore String
    > > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4,
    > > zendbjdbcsubname=zendbJDBCSubName: Tds:, zendbjdbcdriver=zendbJDBCDriver:
    > > com.sybase.jdbc.SybDriver, host server=Host Server: Distinguished Name
    > > CN=SERVER1.OU=BMO.OU=UK.O=OURTREE, network address=Network Address:
    > 13;20;,
    > > zendbuser=zendbUser: MW_DBA, zendbjdbcsubprotocol=zendbJDBCSubProtocol:
    > > sybase:, zendbjdbcport=zendbJDBCPort: 2638}
    > > [12/2/04 12:36:55.013] ZENInv - Server Config: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:56.297] ZENInv - Server Config: The severconfig service is
    > > started...
    > > [12/2/04 12:36:56.320] ZENInv - Sync Scheduler: The scheduler service
    > start
    > > is pending...
    > > [12/2/04 12:36:56.382] ZENInv - Sync Scheduler: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:56.459] ZENInv - Sync Scheduler:
    > >
    > getAttributes:Attributes={zeninvsyncrepeatinterval =zeninvSyncRepeatInterval:
    > > >
    > > }
    > > [12/2/04 12:36:56.463] ZENInv - Sync Scheduler: Logout from NDS
    > returnedtrue
    > > [12/2/04 12:36:56.585] ZENInv - Sync Scheduler: This is the schedule
    > > fetchedRun Daily: Monday, Tuesday, Wednesday, Thursday, Friday From
    > 00:00:00
    > > To 22:55:00 (Randomly dispatch during time period)
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: fetchSchedule returned:
    > true
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: Schedule Fired
    > > [12/2/04 12:36:56.597] ZENInv - Sync Scheduler: The scheduler service is
    > > started...
    > > [12/2/04 12:36:56.721] ZenInv - Upgrade Service: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:36:56.752] ZenInv - Upgrade Service:
    > > getAttributes:Attributes={zeninvcomponentstatus=ze ninvComponentStatus: 4.0
    > > 12 0}
    > > [12/2/04 12:36:56.756] ZenInv - Upgrade Service: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Info : Read
    > > zenInvComponentStatus = 4.0 12 0
    > > [12/2/04 12:36:56.758] ZenInv - Upgrade Service: Inventory Server
    > > zenInvComponentStatus = 4.0 12 0
    > > [12/2/04 12:36:56.789] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceIni
    > t'
    > > [12/2/04 12:36:56.815] ZENInv - STRConverter: Start with
    > > 'ServiceStatusChangeListener' invoked
    > > [12/2/04 12:37:04.691] ZenInv - Upgrade Service: migrateDbToP1(true)
    > failed
    > > in AlterProcedure
    > > [12/2/04 12:37:04.807] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:04.845] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:04.881] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
    > j,
    > > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
    > > l, "�� �s, "� �T, "�6� j, "�9Y l}
    > > [12/2/04 12:37:04.898] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:04.912] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:04.951] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:04.984] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-�O
    > j,
    > > "-�� l, "Tw� �s, "Ty� �T, "T�� j, "T�-
    > > l, "�� �s, "� �T, "�6� j, "�9Y l}
    > > [12/2/04 12:37:04.990] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:04.991] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.113] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.209] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.246] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.277] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.284] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.285] ZENInv - Status Reporting: Number of modified
    > records
    > > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.286] ZenInv - Upgrade Service: Upgrade to ZfD4.0 or
    > ZFS3.0
    > > SP1 failed. Reinstall ZFD4.0 or ZFS3.0 SP1 and start the inventory server
    > > again
    > > [12/2/04 12:37:05.288] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.326] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.358] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.364] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.365] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.403] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.435] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "-��
    > l,
    > > "Tw� �s, "Ty� �T, "T�� j, "T�- l, "��
    > > �s, "� �T, "�6� j, "�9Y l, "�~; �s}
    > > [12/2/04 12:37:05.441] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.445] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.568] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.670] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.707] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:05.738] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:05.747] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:05.748] ZENInv - Status Reporting: Number of modified
    > records
    > > are: 0 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, Running EnumModifier in integrated mode with
    > > upgradeService
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbDriver:com.sybase.jdbc.SybDriver
    > > [12/2/04 12:37:05.767] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables,
    > >
    > dbURL:jdbc:sybase:Tds:11.32.25.98:2638?ServiceName =mgmtdb&JCONNECT_VERSION=4
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbType:0
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbUser:MW_DBA
    > > [12/2/04 12:37:05.768] ZenInv - Upgrade Service: [EnumModifier]
    > > modifyEnumTables, dbPasswd:novell
    > > [12/2/04 12:37:06.844] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.selector.Se lectorServiceInit'
    > > [12/2/04 12:37:07.046] ZENInv - Selector: Selector Services Started
    > > Successfully
    > > [12/2/04 12:37:07.046] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
    > > [12/2/04 12:37:07.062] ZENInv - Selector: Selector Code Profiling disabled
    > > [12/2/04 12:37:07.067] ZENInv - Storer: Start with
    > > 'ServiceStatusChangeListener' invoked
    > > [12/2/04 12:37:17.010] ZENInv - Selector: Getting ServerConfig HashTable
    > > [12/2/04 12:37:17.010] ZENInv - Selector: Getting InvServiceObj from
    > > HashTable
    > > [12/2/04 12:37:17.011] ZENInv - Selector: Getting NDSTree from
    > ServiceObject
    > > [12/2/04 12:37:17.013] ZENInv - Selector: NDSTree=null
    > > [12/2/04 12:37:17.014] ZENInv - Selector: Getting InventoryServiceDN from
    > > ServiceObject
    > > [12/2/04 12:37:17.014] ZENInv - Selector:
    > > InventoryServiceDN=CN=SERVER1_ZenInvService.OU=BMO .OU=UK.O=OURTREE
    > > [12/2/04 12:37:17.014] ZENInv - Selector: Getting ScanDir from
    > ServiceObject
    > > [12/2/04 12:37:17.015] ZENInv - Selector: ScanDir=DATA:\Zenworks\ScanDir
    > > [12/2/04 12:37:17.021] ZENInv - Selector: NEW SyncServiceTable Constructor
    > > Invoked
    > > [12/2/04 12:37:17.022] ZENInv - Selector: Creating-Verifying
    > > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.022] ZENInv - Selector: Checking for
    > > DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.023] ZENInv - Selector: synchTableDir exists. Check
    > wether
    > > this is a directory or File
    > > [12/2/04 12:37:17.024] ZENInv - Storer: Storer from dblocation user:
    > MW_DBA
    > > driver: com.sybase.jdbc.SybDriver protocol: jdbc:sybase: subname: Tds:
    > port:
    > > 2638
    > > [12/2/04 12:37:17.024] ZENInv - Selector: Directory
    > > ExistsDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.024] ZENInv - Selector: Directory Existence
    > > ConfirmedDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.025] ZENInv - Selector: Serialize-Deserialize File
    > > DATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.025] ZENInv - Selector: Initializing SyncServiceTable
    > > [12/2/04 12:37:17.025] ZENInv - Selector: SynchTable Does not Exist
    > > [12/2/04 12:37:17.026] ZENInv - Selector: Attempting to Load SynchTable
    > From
    > > Serialized File
    > > [12/2/04 12:37:17.026] ZENInv - Selector: DeSerializing hashTable
    > > FromDATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.029] ZENInv - Storer: url[From DBObject]:
    > > jdbc:sybase:Tds:11.32.25.98:2638?ServiceName=mgmtd b&JCONNECT_VERSION=4
    > > [12/2/04 12:37:17.035] ZENInv - Storer: wsdn:
    > > CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREEi = 0
    > > [12/2/04 12:37:17.037] ZENInv - Selector: DeSerializing SyncService
    > > HashTable
    > > [12/2/04 12:37:17.041] ZENInv - Selector: SynchTable Loaded Sucessfully
    > From
    > > Serialized File
    > > [12/2/04 12:37:17.042] ZENInv - Selector: Getting hasDatabase status from
    > > ServiceObject
    > > [12/2/04 12:37:17.042] ZENInv - Selector: hasDatabase is true from
    > > ServiceObject
    > > [12/2/04 12:37:17.042] ZENInv - Selector: Getting isStandAlone status from
    > > ServiceObject
    > > [12/2/04 12:37:17.043] ZENInv - Selector: isStandAlone is true from
    > > ServiceObject
    > > [12/2/04 12:37:17.043] ZENInv - Selector: ConvDir
    > > DATA:\Zenworks\ScanDir\conv\
    > > [12/2/04 12:37:17.044] ZENInv - Selector: ConvDir exists. Check wether
    > this
    > > is a directory or File
    > > [12/2/04 12:37:17.044] ZENInv - Selector: DATA:\Zenworks\ScanDir
    > > [12/2/04 12:37:17.045] ZENInv - Selector: DATA:\Zenworks\ScanDir\DbDir
    > > [12/2/04 12:37:17.045] ZENInv - Selector:
    > > [12/2/04 12:37:17.048] ZENInv - Selector: Getting SELECTOR_STORER Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_COLLECTOR Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting SELECTOR_CONVERTER Synch
    > > Object
    > > [12/2/04 12:37:17.049] ZENInv - Selector: Getting CONVERTER_SELECTOR Synch
    > > Object
    > > [12/2/04 12:37:17.050] ZENInv - Selector: Getting SYNCHSERVICE_SELECTOR
    > > Synch Object
    > > [12/2/04 12:37:17.061] ZENInv - Storer: Loading Storer test properties
    > file
    > > [12/2/04 12:37:17.080] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > > 'com.novell.zenworks.common.inventory.scancollecto r.ScanCollector'
    > > [12/2/04 12:37:17.338] ZENInv - IFS Server: zenInvScanCollector:
    > > FileServiceController: Startup Properties: {chunksize=4096,
    > >
    > lockfactory=com.novell.zenworks.common.inventory.i fs.utils.MemoryFileLockFac
    > > tory, lockseed=ScanSelectorLock, transfers=100,
    > > rootdirectory=DATA:\Zenworks\ScanDir, timeout=60000,
    > > servicename=zenInvScanCollector, portnumber=0}
    > > [12/2/04 12:37:17.499] Service Manager: start(ServiceDataAccessor,
    > String[])
    > > not found in
    > >
    > 'com.novell.zenworks.desktop.inventory.InvSyncServ ice.ManagableSyncService'
    > > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: SyncService thread
    > > started
    > > [12/2/04 12:37:17.579] ZENInv - Inventory Sync Service: NEW
    > SyncServiceTable
    > > Constructor Invoked
    > > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Creating-Verifying
    > > Serialize-Deserialize Location DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.580] ZENInv - Inventory Sync Service: Checking for
    > > DATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: synchTableDir
    > > exists. Check wether this is a directory or File
    > > [12/2/04 12:37:17.585] ZENInv - Inventory Sync Service: Directory
    > > ExistsDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service: Directory
    > Existence
    > > ConfirmedDATA:\Zenworks\ScanDir\stable\
    > > [12/2/04 12:37:17.586] ZENInv - Inventory Sync Service:
    > > Serialize-Deserialize File DATA:\Zenworks\ScanDir\stable\STABLE.SER
    > > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Initializing
    > > SyncServiceTable
    > > [12/2/04 12:37:17.587] ZENInv - Inventory Sync Service: Will Use the
    > > existing SyncServiceTable
    > > [12/2/04 12:37:18.445] ZENInv - Status Reporting: Messages are written
    > into
    > > XML file for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.484] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:18.520] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:18.525] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.526] ZENInv - Status Reporting: Number of records to add
    > > are: 1 for DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.564] ZENInv - Status Reporting: getAttributesofDN:
    > > Attributes of:
    > > [12/2/04 12:37:18.595] ZENInv - Status Reporting:
    > > getAttributes:Attributes={zeninvserverlog=zeninvSe rverLog: "Tw�
    > �s,
    > > "Ty� �T, "T�� j, "T�- l, "�� �s, "�
    > > �T, "�6� j, "�9Y l, "�~; �s, "�s? �T}
    > > [12/2/04 12:37:18.600] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.601] ZENInv - Status Reporting: Adding record 0 for
    > > DN=CN=SERVER1_ZenInvService.OU=BMO.OU=UK.O=OURTREE
    > > [12/2/04 12:37:18.699] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > > [12/2/04 12:37:18.783] ZENInv - Status Reporting: Logout from NDS
    > > returnedtrue
    > >
    > > Migration Log
    > > ***********
    > > Starting the AlterProcedure Log at 2004-12-02 11:45:29.731
    > > Unzipping the file migrate.zip
    > > Transforming the Migration SQL files...
    > > ..3
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Initial_0
    > > is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nPotsModem_1 is done with 545 0x03010c0a010202
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nOperatingSystem_2 is done with 143 0x03010e02
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nNetworkAdapter_3 is done with 544 0x03010c0b04
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ze
    > > nDiskDrive_4 is done with 543 0x03010c080301
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Wi
    > > nOperatingSystem_5 is done with 547 0x03010e0201
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\zenworks_vi
    > > deoadapter_6 is done with 53 0x03010c030c0201
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Sy
    > > stemInfo_7 is done with 228 0x03020404
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_so
    > > undadapter_8 is done with 546 0x03010c16
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Mo
    > > therboard_9 is done with 221 0x0302040101
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Lo
    > > gicalDiskDrive_10 is done with 113 0x03010c110402
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    > > ventoryscanner_11 is done with 181 0x03011402
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_in
    > > stalleddriver_12 is done with 548 0x2701
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_In
    > > stalledDirectory_13 is done with 551 0x4a
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bu
    > > s_14 is done with 35 0x03010c0301
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_bi
    > > os_15 is done with 180 0x0301140101
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > CurrentLoginUser_16 is done with 549 0x48
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > LastLoginUser_17 is done with 550 0x49
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\ManageWise_
    > > User_18 is done with 205 0x03011a
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\misc_19
    > is
    > > copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybcustom_2
    > > 0 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybdelprocs
    > > _21 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybextended
    > > _22 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\sybrmaudit_
    > > 23 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\CIM_Process
    > > or_24 is copied
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Zenworks_Ne
    > > twareOperatingSystem_24 is done with 142 0x03010e01
    > >
    > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\indytoprom_
    > > 26 is copied
    > > \DATA:\zenworks\Inv\Server\wminv\properties\migrat e\sybase\input\Post_30
    > is
    > > copied
    > > Starting Schema Migration
    > > Adding the extra db spaces...
    > > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM9%'
    > > has the results
    > > File_NAME=mgmtdb9.db
    > > dbfile's base directory =
    > > SELECT file_name FROM SYSFILE WHERE dbspace_name LIKE '%CIM10%'
    > > CREATE DBSPACE CIM10 AS 'mgmtdb10.db'
    > > Totaltime taken for Schema Migration : 149
    > > Migration Exception Message->Could not add the dbspace..ASA Error -121:
    > > Permission denied: unable to create the dbspace file "CIM10",
    > > SQLState->42501, ErrorCode->262
    > >
    > >
    >
    >

  • ITunes 10.1.2 upgrade on  Win XP Pro SP3 Kills Internet access

    The latest iTunes 10.1.2 install on my Win XP Pro SP3 system kills my Internet access. Internet status shows that I'm connected but Internet Explorer and Firefox can't connect to the server. Running Win XP Pro SP3 with all MS updates applied on a Dual-Core Intel 6600 chip, 4 gig of memory and a couple of terabytes of hard drive. When I do a restore from my backup hard drive to the prior OS and iTunes version, everything is back to normal. I didn't receive any error notifications both times from the install. I first did the install from the Apple website directly (and lost Internet access), then restored my backup system and downloaded the update separately and then installed and lost Internet access again. Am now back up using iTunes 10.1.1.4. Is this update from Egypt? (supposed to be funny).
    Thanks-
    Richard

    Thanks for the link. I noticed that "Swut" from Orange County, Ca (see the post below) had a reply in the link you gave me referring to "Vipre" , which is an Anti-Virus program that I also use, like "Swut".
    I will investigate this further. In defense of Apple, there is no way that they can test against every bit of software that we run on these PCs. I would hope that if we find out that there is some problem with the Vipre interface, both Apple and the Vipre people will be made aware of the problem.
    Before I try the iTunes 10.2.1 upgrade again, I'll contact Sunbelt Software- the people who make Vipre and see if they have heard of this problem. I'll let all of you know what the results are.
    Thanks- Richard Van Nostrand
    "From Swut
    From: Orange County, CA
    Registered: Jan 28, 2008
    Re: iTunes 10.1.0.56 update kills network interface - Windows 7
    Posted: Dec 12, 2010 2:32 AM in response to: TG10987
    I didn't have to go all the way through with TRG10987s solution. When I got to step 4 I noticed that VIPRE had installed multiple virtual network adapters on to of the network adapters. I uninstalled VIPRE thereby deleting the virtual adapters ran the upgrade, and reinstalled VIPRE. Everything works fine now.
    Thanks to TG10987, who put me on the path."

  • Upgrade problem CE 7.1 SP3 to SP4  (ESP_FRAMEWORK)

    Hi all,
    I have a problem upgrading the version of CE 7.1 SP3 to SP5.
    Deproying component 'sap.com/ESP_FRAMEWORK' is aborted .
    Please Help me . How to Resolve this problem?
    My system is NW CE 7.1 Productive Edition SP03 , win2003 x64.
    @Following is Detail.
    1.I downloaded the SP05(from SP03) files from SMP.
    2.I had start the update tool ( CEUPDATE69_0-10005101.EXE ) .
    (I could'nt use [Update Management Service tool] ,because of my network environment is using 'http proxy user/password'.)
    3.When deployment phase ,following error was occured.
    Details message(s):
    Software component ESP_FRAMEWORK deployment messages:
    Deployment of archive \\vmces10\sapmnt\trans\EPS\in\ESPFRAMEWORK05_0-20001918.SCA for component sap.com/ESP_FRAMEWORK aborted
    Detailed message: 1. Contains Aborted deployment component: sdu id: sap.com_tc~esi~esp~app sdu file path:
    E:\usr\sap\CES\J00\j2ee\cluster\server0\.\temp\tc~bl~deploy_controller\archives\62\ESPFRAMEWORK05_0-20001918_SCA1211224546031\DEPLOYARCHIVES\sap.com~tc~esi~esp~app.sda
    version status: HIGHER deployment status: Aborted description:
      1. [ERROR CODE DPL.DS.5402] JLinEE reported following erros for sap.com/tc~esi~esp~app application.
       ERRORS: * Application Model Builder: Content is not allowed in prolog., file: sap.com~tc~esi~esp~app.sda#META-INF/application.xml, column 1, line 1
       , severity: error * Web Model Builder: Content is not allowed in prolog.
       , file: sap.com~tc~esi~esp~app~web.war#WEB-INF/web.xml, column 1, line 1, severity: error Hint: 1) Given application file is not valid one.
    Deployment of archive \\vmces10\sapmnt\trans\EPS\in\ESPFRAMEWORK05_0-20001918.SCA --> sap.com~tc~esi~esp~wsil.sda for component sap.com/tc~esi~esp~wsil
    is rejected because deployment of other component it depends on is rejected
    Detailed message: 1. Aborted deployment archive: sdu id: sap.com_tc~esi~esp~app contained in software archive: sdu id: sap.com_ESP_FRAMEWORK
    Deployment of archive \\vmces10\sapmnt\trans\EPS\in\ESPFRAMEWORK05_0-20001918.SCA --> tc~esi~uddi~sr~proxy~ear.sda for component sap.com/tc~esi~uddi~sr~proxy~ear
    is rejected because deployment of other component it depends on is rejected
    Detailed message: 1. Aborted deployment archive: sdu id: sap.com_tc~esi~esp~app contained in software archive: sdu id: sap.com_ESP_FRAMEWORK
    Deployment of archive \\vmces10\sapmnt\trans\EPS\in\ESPFRAMEWORK05_0-20001918.SCA --> sap.com~tc~esi~esp~app.sda for component sap.com/tc~esi~esp~app aborted
    Detailed message: 1. [ERROR CODE DPL.DS.5402] JLinEE reported following erros for sap.com/tc~esi~esp~app application. ERRORS: * Application Model Builder: Content
    is not allowed in prolog., file: sap.com~tc~esi~esp~app.sda#META-INF/application.xml, column 1, line 1, severity: error * Web Model Builder: Content
      is not allowed in prolog., file: sap.com~tc~esi~esp~app~web.war#WEB-INF/web.xml, column 1, line 1, severity: error Hint: 1) Given application file is not valid one.
    See Deploy Controller log E:\usr\sap\CES\J00\j2ee\JSPM\log\log_2008_05_20_03_52_08\deploy_2008-05-20_04-07-44.log for details.
    Thanks in advance,
    Best regards,
    Seot

    Hi Vani
    thanks again.
    -->1. Do you have the value of the key UpdatePolicyURL?
    I think UpdatePolicyURL doesn't have relation to SP applying.
    What meaning is it?
    -->2. I assume you do have an SID.
       'SID'  means SAP support market place's ID ?
       I had just registered OSS message.
    -->Also, could you please chk this doc?
       yes. I proceedured patching with this doc.
    *additional logs are following
    JSPM_MAIN_1_01.LOG
    Deployment of archive F:\sp5\BIWDALV05_0-20001925.SCA --> bi~alv~common.sda for component sap.com/bi~alv~common is rejected because deployment of other component it depends on is rejected
    Detailed message:
              1. Aborted deployment archive:
    sdu id: sap.com_tc~esi~esp~app
    contained in software archive:
    sdu id: sap.com_ESP_FRAMEWORK
    See Deploy Controller log E:\usr\sap\CES\J00\j2ee\JSPM\log\log_2008_05_26_22_49_27\deploy_2008-05-26_22-59-15.log for details.
    <br><b>Overall deployment messages:</b>
    Deployment finished with error.
    May 26, 2008 11:20:06 PM [Error]: Deployment of queue STI-1211809786655 completed with error Deployment finished with error.
    JSPM version is 7.10.5.0.24. Current JSPM log directory is E:\usr\sap\CES\J00\j2ee\JSPM\log\log_2008_05_26_22_49_27.
    deploy_2008-05-26_22-59-15.log
         695. Client path 'F:\sp5\ESPFRAMEWORK05_0-20001918.SCA --> sap.com~tc~esi~esp~app.sda'
         Sdu info :name 'tc~esi~esp~app', vendor 'sap.com', location 'SAP AG', version '7.1005.20080201145918.0000', software type ('J2EE', sub type ''), dependencies :[( name 'tc~esi~esp~lib', vendor 'sap.com') , ( name 'tc~esi~esp~api', vendor 'sap.com') ]
              Deploy status is 'Aborted'
              Description:'1. [ERROR CODE DPL.DS.5402] JLinEE reported following erros for sap.com/tc~esi~esp~app application.
    ERRORS:
    * Application Model Builder: Content is not allowed in prolog., file: sap.com~tc~esi~esp~app.sda#META-INF/application.xml, column 1, line 1, severity: error * Web Model Builder: Content is not allowed in prolog., file: sap.com~tc~esi~esp~app~web.war#WEB-INF/web.xml, column 1, line 1, severity: error
    Hint: 1) Given application file is not valid one.'.
    regards.
    seo

  • Having trouble upgrading WLS to 10.3.2

    Hi guys,
    I'm having trouble upgrading the domain which is created in a prior release of weblogic to 10.3.2.
    I tried to start the server and it prompted me with the option of upgrading. But somehow failed to do the upgrade.
    Here is the detailed log...:
    <May 9, 2011 8:17:25 PM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-1
    -133393-1.6.0_20-20100512-2126-linux-x86_64 from Oracle Corporation> ration> tion>
    The domain being started was created in a prior release and is being started with WebLogic Server 10.3.2.0 software. WebLogic Serve
    will attempt to backup this domain and upgrade the domain to WebLogic 10.3.2.0 format. If the domain contains WebLogic Workshop, Por
    tal, or Integration elements, the procedure should be aborted and the WebLogic Platform upgrade tool must be used to upgrade the dom
    ain.d to upgrade the domain.pgrade the domain.r release and is being started with WebLogic Server 10.3.2.0 software. W
    Do you want to continue [y/n]?: y
    <May 9, 2011 8:20:23 PM GMT> <Info> <Management> <BEA-141200> <Detected a domain which was createdf
    rom an earlier release of WLS. The Domain will be upgraded to the current 10.3.2.0 release.> lease.> ase.>
    Calling Wizard framework for upgrade: args2: [-mode=silent, -file=wcf/plugin_silent_wizard.xml, -p:plugin:plugin.silent.response.fie
    =weblogic/upgrade/domain/responses.xml, -log=stdout, -p:plugin:plugin.executionPlan.file=weblogic/upgrade/domain/execplan.xml, -p:pl
    onfiguration to: 8.1
    <May 09, 2011 8:20:25 PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
    <May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    2011-05-09 20:20:26,215 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Domain directory selected: /opt/fedex/ccii/welogic/ccii-mem-sip/bin PM GMT> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to: 8.1>
    <May 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Server Names in this directory: [MemL1SIPServr1]ay 09, 2011 8:20:26 PM GMT> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /opt/fedex/ccii/weblogic/ccii-mem-sip/bin>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
    2011-05-09 20:20:28,212 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Current domain version 8.1.4.0 will be upgradd to 10.3.2.0. 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Server Names in this directory: [MemL1SIPServer1]>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Current domain version 8.1.4.0 will be upgraded to 10.3.2.0.>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
    2011-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Preparing to select optional actions>
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>1-05-09 20:20:28,261 INFO [prepare] com.bea.plateng.wizard.plugin.LogMessageObserver - Preparing to select optional actions
    2011-05-09 20:20:28,283 INFO [execute] com.bea.plateng.wizard.plugin.LogMessageObserver - Admin Server exists in this directory. Configration will be written out later.NFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written ou
    <May 09, 2011 8:20:28 PM GMT> <INFO> <Upgrade> <BEA-800000> <Admin Server exists in this directory. Configuration will be written out laer.>guration will be written out later.
    2011-05-09 20:20:28,287 FATAL [execute] com.bea.plateng.wizard.WizardController - Uncaught Exception
    java.lang.NullPointerException
    at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
    at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
    at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
    at java.lang.Thread.run(Thread.java:619)
    <May 09, 2011 8:20:28 PM GMT> <FATAL> <Upgrade> <BEA-800000> <Uncaught Exception>
    java.lang.NullPointerException
    at weblogic.upgrade.domain.configuration.NodeManagerCredentialsPlugIn.execute(NodeManagerCredentialsPlugIn.java:123)
    at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
    at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
    at java.lang.Thread.run(Thread.java:619)
    A fatal error has occurred. This application will terminate.
    <May 9, 2011 8:20:28 PM GMT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: Error upgrading the domain. Look at your sandard output and error for more information> tion>
    <May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
    <May 9, 2011 8:20:28 PM GMT> <Error> <WebLogicServer> <BEA-000383>
    <May 9, 2011 8:20:28 PM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    Hope you guys find me a solution for this...Thank you.

    Hi, not positive, but it sounds like maybe the Optical drive is flaky, but a lomg shot...
    I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
    Disconnect the USB cable from any Uninterpretable Power Supply so the system doesn't shut down in the middle of the process.

  • Upgrade Exchange 2010 SP2 to SP3 getting fail

    Hi,
    I am trying to upgrade from exchange 2010 SP2 to SP3, but it getting failed.
    I have already run the prepare schema, prepare and domain prep in all domains and it got replicated in DR Domain controllers.
    But, still i am not able to upgrade the server. The error says,
    Preparing Exchange Setup
        Copying Setup Files                           COMPLETED
    The following server roles will be upgraded
    Languages
    Hub Transport Role
    Client Access Role
    Management Tools
    Performing Microsoft Exchange Server Prerequisite Check
        Configuring Prerequisites                                 COMPLETED
        Organization Checks                                      
    FAILED
         Setup needs to contact the Active Directory schema master but this computer
     is not in the same Active Directory site as the schema master (Default-First-Si
    te-Name).
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Language Pack Checks                                     
    COMPLETED
        Hub Transport Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
        Client Access Role Checks                                 FAILED
         Setup encountered a problem while validating the state of Active Directory:
     Exchange organization-level objects have been created but have not yet replicat
    ed to the local domain.  Wait for replication to complete and then run setup aga
    in.
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    Exchange Server setup encountered an error.
    Thanks,
    San

    Hi,
    Schema updates should be done on a schema master or on a DC in the same AD site as the schema master. Once extended, the updates will replicated via AD replication. To narrow down the issue, I recommend you check if there is any event related to replication
    on domain controller holding schema master role.
    Is the schema master role in the same site as the Exchange server which you want to upgrade? If not, you can try to transfer FSMO role to a domain controller which is in the site where you want to install Exchange 2010 SP3 and then upgrade to check the result.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for