Upgrade XIR2 SP2 to XIR3

Hi,
we are planning an upgrade from XIR2 Sp2 to XIR3 SP3. I've read the upgrade guide which suggests that you can perform a direct upgrade on XIR2 in situ, but I've seen a number of posts where people are saying that you need to perform a clean installation of R3 and migrate all content across..The later was the approach I had planned on.
Thanks in advance.
Paul.

Hi Paul,
In my humble opinion, whenever you perform a major upgrade, you should always create a brand new instance of the system database (a.k.a. CMS database) for the new installation. After the installation is completed, you can migrate the contents over using Import Wizard. I don't trust BIAR files because they are not reliable....got burned way too many times.
As far as security, XI 3.1 is different from XI R2, especially on inheritance. The best practice is to rebuild security from the ground up in XI 3.1. I have done that myself and it is not that hard (even though we have 20,000+ users in the system). I have written a blog on upgrade and you can find it on http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/19997. [original link is broken] [original link is broken] [original link is broken]
By the way, the current version is not called R3. SAP is trying to avoid any confusion because R3 is also the name of an ERP product. Therefore, the current version of SAP BusinessObjects is simply called XI 3.1.
Hope this helps.

Similar Messages

Weblogic 6.1 server upgrade from SP2 to SP3

Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

Upgrade installer from SP2 to SP3 is only available for paid BEA
customers. You need a login at http://support.bea.com
Kumar
kiran rane wrote:
Hi All
We have weblogic server 6.1 SP2 installed on the solaris machine. Now we
have to upgrade our weblogic server 6.1 SP3. We also have downloaded the installable.
But that installable seems to over-write the previous weblogic server & installs
the server afresh. Is there any patch kinda thing available which allows me to
upgrade from SP2 to SP3 ? I don't want a fresh new install of SP3 server.
thanks in advance
-Kiran Rane

ReportPart class new XIR2 SP2 webservices SDK

The following information is quoted from the BO XIR2 SP2 and Productivity Pack Release Note Chapter 8. I am interested in the following two class addtions. But I can't seem to be able to find them in the web services SDK java reference as describle in the release note. Can anyone kindly tell me where I should be looking at for the new classes documentation. Thanks in advance,The following APIs are added in this release. For more information on these APIs, refer to Java API Reference at <a href="http://devlibrary.businessobjects.com/">http://devlibrary.businessobjects.com</a>u2022 ReportPart: The ReportPart class helps you in accessing a particular part of a report. For example, a section or table in a report.u2022 NavigateToReportPart: The NavigateToReportPart class is used to navigate to a particular part of a report. To view the corresponding report part, you must retrieve a particular ReportPartReference from the XMLView of the report and set it to RetrieveView instance using setReportPartReference() (For .NET, ReportPartReference) method.

Those classes, as you saw, are new to Web Services ReportEngine API with Service Pack 2.
Unfortunately, the on-line documentation is currently based on CHF15, and is yet to be updated for Service Pack 2.
I've heard it should be updated in a few days.
Thank you for your patience.Â
Ted Ueda

To what extent can XIR2 users use XIR3 platform, if at all?

We are deploying XIR3 and we have suddenly been asked if XIR2 users can use the system. Is so what can / cannot be used? For example:
1. Can an XIR2 user login to an XIR2 repository?
2. Can they use an XIR2 Desktop Intelligence against an XIR3 CMS, Universe?
3. Can they schedule an XIR2 report via an XIR3 repository?
My suspicions are that they cannot, but if someone would be so kind as to clarify or advise which document to refer to that would be great
Thanks...

It's a large multinational company. One team is Global projects (just migrated from v 5.1.6 to XIR3). The other team is on a seperate group (R2, and will not upgrade for a while).
One team has an XIR3 server, R3 universes and R3 reports. The other team only has an R2 deployment (reports, universes, connections - all). The R2 deployment has a different set of users, reports and universes but they need some of the R3 reports, connections and universes even though their users do not exist in the R3 environment.
I found the following on page 57 of xi3_bip_upgrade_en.pdf:
Although it is recommended that you upgrade all your Desktop Intelligence
clients to Desktop Intelligence XI 3.0, you can continue using Desktop
Intelligence XI Release 2 clients against a BusinessObjects Enterprise XI
3.0 server during the upgrade phase.
You can continue to use Desktop Intelligence XI Release 2 clients to connect
to an XI 3.0Central Management Server (CMS), and to create, view, and
edit Desktop Intelligence XI 3.0 documents that use either of the following.
u2022 XI Release 2 universes.
u2022 XI 3.0 universes that are based on XI Release 2 universe connections.
You can also use Desktop Intelligence XI Release 2 and XI 3.0 clients on
the same computer.
Desktop Intelligence XI Release 2 does not work with universes that are
based on XI 3.0 universe connections.
Desktop Intelligence XI 3.0 clients work with both XI Release 2 and XI 3.0
universes and universe connections. However, you cannot use Desktop
Intelligence XI 3.0 to connect to an XI Release 2 CMS, or to use Desktop
Intelligence documents through an XI Release 2InfoView.
Note:
u2022 It is highly recommended that you upgrade to Desktop Intelligence XI 3.0
clients. Desktop Intelligence Release 2 and BusinessObjects Enterprise
XI 3.0 interconnectivity should only be used to make the upgrade
BusinessObjects Enterprise 3.0 easier.
u2022 Do not use the Central Management Console (CMC) or Designer XI 3.0
to edit XI Release 2 universe connections. Using the CMC or Designer
to edit an XI Release 2 universe connection will convert the universe
connection to an XI 3.0 format, and break compatibility. Desktop
Intelligence XI Release 2 clients will not be able to use the XI 3.0 universe
connections.

Issues after upgrading to SP2 mm: Blank page first page.

Hello, ever since upgrading to mm sp2 on .net 2008 I been having an issue. I created a new project and everything done by the books. When I run the report through the browser everything initially seems normal, it asks for input parameters then login info. When the report is ready to be displayed, the page is blank but has all the Crystal toolbars and such. If i were to perform an action like hit the zoom button, the report will magically be displayed! It seems the viewer has an issue initially rendering the report until I hit something on the toolbar like the zoom button. I just zoom in 100% and the report displays! Anyone have this issue and know how to resolve it?
If I were to export this blank page to PDF, the report will be displayed on the PDF correctly. just strange.
Thanks in advanace.

Copy the CrytalReportViewers12 folder from your development computer to the \aspnet_client\system_web\2_0_50727 in the IIS default website.
If you are using ReportRefresh, comment that out.
Try a different Browser like Firefox.
Are you browsing from the work station or from the Server? Can you try it from the Server?
Try a new test app. Run a saved data report (Crviewer1.reportsource). Do not use sessions or postbacks. Does this test app work?
Ludek
Edited by: Ludek Uher on Oct 20, 2009 7:13 AM

No Sound after upgrade XP SP2

Hi,
I have a MSI 865pe neo2-P motherboard, the sound used to work fine with win XP sp1 and with my ATI all-in-wonder (vga, tv, line in input).
Now since the upgrade to XP SP2, I have no sound from any windows program, it does not capture sound on line in when I record movies and there is no sound from audio-cds (even if i connect the jack to the cd-drive).
In the display drivers the AC 97 device is working properly, but if i try to raise the sound volume meter, ther is no normal sound, only the annoying PC speaker error beep. If I try to play mp3 files there is an error. In volume control there is no item muted.
I have tried every different settings: hearphones, audio driver versions, safe bios settings, unplugged other devices (cd-rom etc). I also upgraded to the latest realtec AC 97 driver: 5.10.0.5770 (wdm_a368)
Are you having the same problem? How can my PC have sound again?
best regards,
joaquim.

Try to look at the system properties for conflicts or driver problems. Try to download an updated driver on your sound device too.

Exchange 2010 upgrade to SP2 failed

I got errors when trying to upgrade Exchange Server 2010 to SP2. It failed on the hub transport role.  Any ideas on how to repair this? The server had a previous issue and I was trying to resolve it by installing SP2. Thank
you.
[01/02/2013 19:11:29.0066] [1] Executing:
          $vdirName = "PowerShell (Default Web Site)";
          $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
          $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
          if ($vdir -eq $null)
            $vdirName = "PowerShell";
            new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
          else
            update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
            Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
[01/02/2013 19:11:29.0066] [2] Active Directory session settings for 'Get-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0066] [2] Beginning processing get-PowerShellVirtualDirectory -Server:'Exchange.BGCC.local' -DomainController:'Exchange.BGCC.local'
[01/02/2013 19:11:29.0082] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
[01/02/2013 19:11:29.0082] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0082] [2] Searching objects of type "ADPowerShellVirtualDirectory" with filter "$null", scope "SubTree" under the root "EXCHANGE".
[01/02/2013 19:11:29.0129] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0129] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
[01/02/2013 19:11:29.0191] [2] [WARNING] IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell wasn't found. Please make sure you've typed it correctly.
[01/02/2013 19:11:29.0207] [2] Ending processing get-PowerShellVirtualDirectory
[01/02/2013 19:11:29.0207] [2] Active Directory session settings for 'Update-PowerShellVirtualDirectoryVersion' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred
Domain Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0207] [2] Beginning processing update-PowerShellVirtualDirectoryVersion -DomainController:'Exchange.BGCC.local'
[01/02/2013 19:11:29.0207] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
[01/02/2013 19:11:29.0222] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0222] [2] Ending processing update-PowerShellVirtualDirectoryVersion
[01/02/2013 19:11:29.0238] [2] Active Directory session settings for 'Set-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
Controllers: '{ Exchange.BGCC.local }'
[01/02/2013 19:11:29.0238] [2] Beginning processing Set-PowerShellVirtualDirectory -InternalUrl:'http://exchange.bgcc.local/powershell' -DomainController:'Exchange.BGCC.local' -WindowsAuthentication:'False' -RequireSSL:'False' -Identity:'Exchange.BGCC.local\PowerShell
(Default Web Site)'
[01/02/2013 19:11:29.0238] [2] Searching objects "Exchange.BGCC.local\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" under the root "$null".
[01/02/2013 19:11:29.0269] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0285] [2] Processing object "EXCHANGE\PowerShell (Default Web Site)".
[01/02/2013 19:11:29.0316] [2] The properties changed on the object 'PowerShell (Default Web Site)' (CN=PowerShell (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=BGCC,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=BGCC,DC=local) are: "{ InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={ }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={ } }".
[01/02/2013 19:11:29.0316] [2] Saving object "EXCHANGE\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" and state "Changed".
[01/02/2013 19:11:29.0316] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
[01/02/2013 19:11:29.0316] [2] Authentication settings are being applied on the IIS virtual directory "IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell".
[01/02/2013 19:11:29.0378] [2] [ERROR] Unexpected Error
[01/02/2013 19:11:29.0378] [2] [ERROR] A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [2] [ERROR] The system cannot find the path specified.
[01/02/2013 19:11:29.0394] [2] Ending processing Set-PowerShellVirtualDirectory
[01/02/2013 19:11:29.0394] [1] The following 1 error(s) occurred during task execution:
[01/02/2013 19:11:29.0394] [1] 0. ErrorRecord: A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Common.LocalizedException: A failure occurred while trying to update metabase properties. ---> System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the
path specified.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Exchange.Management.Metabase.IisUtility.SetAuthenticationMethod(DirectoryEntry virtualDirectory, AuthenticationMethodFlags method, Boolean value)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetIisVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String metabasePath)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetSplitVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String nego2Path, TaskErrorLoggingDelegate errorHandler, LocalizedString
errorMessage)
   --- End of inner exception stack trace ---
[01/02/2013 19:11:29.0394] [1] [ERROR] The following error was generated when "$error.Clear();
          $vdirName = "PowerShell (Default Web Site)";
          $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
          $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
          if ($vdir -eq $null)
            $vdirName = "PowerShell";
            new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
          else
            update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
            Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
        " was run: "A failure occurred while trying to update metabase properties.".
[01/02/2013 19:11:29.0394] [1] [ERROR] A failure occurred while trying to update metabase properties.
[01/02/2013 19:11:29.0394] [1] [ERROR] The system cannot find the path specified.
[01/02/2013 19:11:29.0394] [1] [ERROR-REFERENCE] Id=PowerShellComponent___0933481a46d24e77abfdf174e8240b80 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[01/02/2013 19:11:29.0394] [1] Setup is stopping now because of one or more critical errors.
[01/02/2013 19:11:29.0394] [1] Finished executing component tasks.
[01/02/2013 19:11:29.0441] [1] Ending processing Install-BridgeheadRole

Hi
I found a thread that with the same error message
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/2e0bebab-cbc5-4f14-a7b4-62cca7da8e82
As it described, there is a firewall between the emc and exchange server and this was cutting the connection.
Hope that will help
Cheers
Zi Feng
TechNet Community Support

Group Policy upgrade to SP2 problem

Hi guys,
We are having the following issue. We have upgraded our XP group policy to SP2. Now each time users login, the first thing they see is a 'restrictions' window saying "this operation has been canceled due to restrictions in effect on this computer."
I wonder how I can figure out which group policy setting is causing this? The same policy worked when the policy was an SP1 policy, but once updated to SP2 it will give that error message. Thank you.

Jakub,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?

Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ? Currently running RTM version of SQL Server 2008 R2.

Hi There,
As a testing purpose long time back i did this. I did this step by step
I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
Then upgraded to 2008 SP2.
Then upgraded to 2008 SP3
Then upgraded to 2008 R2.
Then upgraded to 2008 R2 SP1
Finally to SP2
I dint find any issue.
I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
Every thing is fine in the LAB equipment i tried this.
Gautam.75801

Upgraded to SP2. Now Crystal goes through configuration every time it is launched.

Post Author: krpurcel
CA Forum: Upgrading and Licensing
This morning I upgraded Crystal Report XI. First I installed SP1, then I installed SP2. The installation completed successfully. However every time I launch Crystal now it goes through its configuration process before the software opens. Once that is finished the software opens and works properly.
I should not be going through this configuration setup every time I launch the software. How do I fix this problem?
Thanks!
Kevin

Post Author: V361
CA Forum: Upgrading and Licensing
I had the same issue, I reinstalled CR (from disk) opened and ran a test report (yes that step is important) CR does the configuration piece when you do that. I then applied SP1 and opened a test report, and let CR do the Configuration. Then applied SP2 and ran a test report. All that being said, My CR XI now runs ok.
My Product version is now 11.5.8.963

Upgrade WL7 SP2 to SP5

Hi,
I wish to upgrade our WL7 instance from SP2 to SP5 by applying the SP5 upgrade.
As we have many clients that connect to us via T3 and they all have the weblogic7
SP2 jar in their classpath, would their be any compatbilities issues between SP2
and SP5.
Kevin

Hi Kevin,
You can checkout the following link which has some more info on this topic.
http://edocs/wls/docs70/compatibility/compatibility.html
Even though it mentions about t3 being supported between 61 and 70, it also
implies that its supported between SPs too IMHO.
--Nagesh
"Kevin Sharfman" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I wish to upgrade our WL7 instance from SP2 to SP5 by applying the SP5upgrade.
As we have many clients that connect to us via T3 and they all have theweblogic7
SP2 jar in their classpath, would their be any compatbilities issuesbetween SP2
and SP5.
Kevin

CR2008 hangs after upgrade to SP2 when opening a report w/ invalid printer

Hi,
until CR2008 SP1, when I open a report that was formatted for an unknown printer, a messagebox is displayed with that message an I was able to edit the report and/or assign a correct printer to it. After installing SP2 this behaviour is changed in a an "application hang". CR2008 stops responding. When I open that same report in CR2008 SP1 and delete the printer info, the report opens without any problems in CR2008 SP2
THIS I.M.H.O. A SERIOUS BUG!!!!
Regards,
Adri

From the header of this forum:
+Forum: .NET Development - Crystal Reports
This forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net+
As your query concerns the Crystal Reports Designer, I am moving the thread to the Crystal Reports Design forum.
Ludek

XIR2 SP2 password needed

I am trying to download XIR2_sp2 and it is prompting me for a password to extract the zip file. Where do I get this?
I also have a customer that is on version 11.5.11.1470 what service pack would this be?

Hi,
11.5.11.1470 refers to BO XIR2 + SP5 .You can get temporary license keys on our website.
1] Goto https://service.sap.com
2] Goto Keys and Requests tab
3] You can find license keys here.
Sincerely,
Nikhil Dharme

BO XIR2 SP2 installation order

Post Author: prabhanjana
CA Forum: Deployment
Hi all,
I have installed BO XI R2 Server on my m/c which has Windows 2000 server after that i have installed SP1 --> MHF1 -->CHF13 --> CHF14 and then when i am trying to install SP2 integration pack it is giving error "unable to register critical hot fix for BOXIR2".
Pls let me know what is the order and what are the pre requisites before installing the SP2.Pls let me know the names of the critical hotfixes etc.
I want to work with Content Search facility of BO.For this what are the patches i need to install.
Pls help me in this regard.
Thanks & Regards,
Prabhanjana

Post Author: Long
CA Forum: Deployment
Did you got answer for this, We have same thing, on Windows 2003 server, installed SP1 --> MHF1 -->CHF13 --> CHF15, Now we want to go SP2 with FP2.3 ( I believe that this the latest one), but we do not know how, what should download as there are too many choices, BTW, we download SP2 on much and Aug. twice, the 2 download is not identical. Even for Getting Start file. Any suggestion or experience is welcome.

Exchange 2010 SP1 Upgrade to SP2 and SP3. Choose language.

Hello.
I going to install Exchange 2010 SP1 multilanguage and then update to SP2 and SP3
But then i download SP2 from Microsoft it's ask fоr choose language.
It ask about installer language or about Exchange language?
What language i need to choose if i have multilanguage Exchange SP1 installer?
And if i want to Exchange EMC be in English and Outlook on client machine shows Russian what language i need to choose when install first role from Exchange 2010 SP1 multilang DVD?

Exchange EMC language depends on OS version where you are running it.
Besides about client language you have to choose Russian language pack during install. More info below...
The language of the Outlook user interface that an Outlook user sees, including the content generated by Exchange, depends on the following:
The language the user is using in Outlook
Whether the language they're using in Outlook is supported by Exchange 2010
Whether the language they're using in Outlook has been configured to be available on the Exchange 2010 server
Consider the following scenarios:
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox and both Outlook and Exchange 2010 support the language the user has specified, <Language A>, the user will see all messages and Exchange-generated
mailbox components, for example, the Inbox, in Language A.
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox that's been set to <Language B>, the Outlook user will see the Outlook user interface in Language A, but will see the content generated
by Exchange. For example, by default, folder names such as Inbox,
Deleted Items, and Sent Items display in <Language B>.
You can change the Exchange mailbox language setting on the server using Exchange Management Console or the Exchange Management Shell. For information about how to use the Shell to change the language setting for a mailbox on a server, see
Set-MailboxRegionalConfiguration.
From: Client Language Support for Outlook -
http://technet.microsoft.com/en-us/library/dd638175%28v=exchg.141%29.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Upgrade XIR2 SP2 to XIR3

Similar Messages

Maybe you are looking for