Upgraded 5s to 8.02 Wifi is dead, will not allow me to shut off FindmyPhone to restore. Help

Updated my phone to 8.02, now my wifi is dead, and so I hooked it to my computer and it is asking i turn off FindMyPhone, Try to and it says there has been a verifcation problem with iCloud.  Then goes back to the password again.  Help.

Top gray bar says Mail Upgrade
Below that
Cleaning up changes
Then a blue progress bar that does not move
Below that
While you wait, you can read about the new features in Mail  Read More

Similar Messages

  • HT6162 My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    My phone will not let me download the most recent update for iOS 7.1. It says I need a wifi connection and will not allow me to push the 'Download & Install' button, even when I am at home and my wifi is on. How do I fix this?

    Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
    The app store always gives you the option to use a previous version of the app IF it is available for your device.
    Sorry but you are stuck without new hardware.
    PJRS

  • After upgrading to snow leopard my HP C5180 printer will not allow me to scan to the computer, it only works as a copier?

    Hello,
    My hardrive crashed, replaced and reinstalled. However after upgrading to Snow Leopard v.10.6.8, my HP C5180 printer will not give me an option to scan an image to the computer. It only functions as a copier. Any suggestions are greatly appreciated!
    Thanks

    If your driver is up to date (you didn't say) then you can try Image Capture in your Applications folder or take a look at VueScan http://www.hamrick.com/

  • I just upgraded to Mavericks and I got a box that is title mail upgrade.  I can not close it or get rid of it and it will not allow me to shut down my computer.  Can anyone help

    I just upgraded to Mavericks and a box popped up the the screen that says Mail Upgrade.  It does not have the 3 buttons in the left corner.  How can I get rid of this?  It will not even let me log out of my computer.

    Top gray bar says Mail Upgrade
    Below that
    Cleaning up changes
    Then a blue progress bar that does not move
    Below that
    While you wait, you can read about the new features in Mail  Read More

  • Since upgrading to Lion OS, Firefox (6.0.2) will not allow the print option in Preview (5.5) for PDFs. The Rainbow wheel turns until I eventually force close.

    I cannot print wirelessly to printer or to Evernote, etc. Print option will not work. If I use Safari, the PDF will print.

    Most likely culprits are one of these:
    com.vmware.kext.vmnet          0073.02.98
    com.vmware.kext.vmioplug          0073.02.98
    com.vmware.kext.vsockets          90.1.5
    com.vmware.kext.vmci          90.1.1
    Boot into safe mode, put the machine to sleep, wait about 10 minutes, wake it, and see if the issue persists. If not, dump vmware, restart normally, and repeat the sleep/wake steps.
    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Hi All. I reluctantly upgraded to IOS 7 last night and now cannot access my home WIFI, all other non Apple devices are fine. I have reset, it will not allow me to 'forget this network', doesnt show the option. I have turned on and off

    Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks

    Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

  • Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

    Iphone 6Plus will not allow POP email account and cannot print to my wifi printers, I did on my Iphone 5 until I upgraded, can anyone help

    I had talked with three people at Apple tech support on the phone, one person in the Apple store in Indianapolis, plus the other places I mentioned. Only the one young man in the Apple store was even able to identify the problem which was the POP vs. IMAP issue. And then like you said he was only able to say he hoped it would be fixed in the next update release. I did call him back this morning and told him about your simple solution, that I had seen it at the Apple forum, and that he might suggest bringing this topic up at the next staff meeting. I also let my Verizon rep know and an agent at Comcast. Something so simple yet it took three days and a lot of frustration to get fixed. Thanks again. You're my hero! ~ Carol Thomas
    Also forgot to mention ... I got the iPhone 6 Plus about three weeks ago and did not have this problem. But I did a backup of my iPhone 5S on the computer and then used that backup to restore to my new iPhone. The iPad I did differently and just set it up as a new iPad with no restoring from the old one. That must have made a difference on the phone because it was set up just like the 5S ... as a POP3.

  • My wife has the iphone5 and when connecting to itunes on the computer its stating to upgrade to 10.7 itunes software, the computer is not allowing us to upgrade what can we do

    the itunes 10.7 software is needed in order for iphone5 to be connected but the mac computer will not allow us to upgrade, what im i doing wrong

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

    After I upgraded to Maverick my Epson WF-2504 scanner will not work.  There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download.  It tells me to go to "software update" ???  Any suggestions?

    Thanks Arthur,
    I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
    One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
    I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here.  If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
    I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
    Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
    A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
    Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

  • I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

    i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

    From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
    Take the following steps:
    1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
    2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
    The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
    I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
    Hope this helps!

  • My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

    My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

    I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

  • After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

    After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

    I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My macbook pro is connected to wifi but it will not connect to the internet.

    My macbook pro is connected to wifi but it will not connect to the internet. When I go on safari, it says that "Safari can't verify the identity of the website". Then I tried to update flashplayer but you need the internet to update it. All this only started happening after that Moutain Lion software was downloaded onto the laptop. Please help, I have been internet-less for a couple months now.

    Hi rynhelp,
    If you are not able to connect to the internet after installing Mountain Lion, see this article for information on how to start troubleshooting:
    OS X Mountain Lion: Use Network Diagnostics
    http://support.apple.com/kb/PH10984
    You may find additional troubleshooting information in this article useful:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    It is written for Lion but works for Mountain Lion as well.
    Cheers,
    - Ari

  • Wife's Mac Book Pro locked up will not allow her to log on, it froze up on her so she did a hard shut down by holding power button until it shut down.  Will power up but not allow her to log in on the log in screen.  Any suggestions?

    Wife's Mac Book Pro locked up.  She shut it down by holding power button unitl it shut down,  when she powers it up now it will not allow her to log in on the log in screen.  Any suggestions?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for

  • How do I connect my mac book pro to a second monitor

    I have a macbook pro and want to connect it to a 2nd monitor.  How can I do that?

  • New MBP i5 does not boot after hard disk swap

    Hi there, I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard d

  • Video chat wont work!!!

    hi, so im trying to video chat with my friend at another college. i can text chat fine and everything. However when i try to video chat it says not cnnected and the person isnt responding when i know she is. the error is this. Date/Time: 2008-08-24 2

  • Disable a keyboard key control in listview

    how to disable a keyboard key control in listview ? example page down Thank's

  • TouchScreen Drivers for Windows 7

    Hello, I installed Windows 7 in multiboot and I tried the touchscreen but it didn't work. I need a driver for my HP Pavilion n011dx x360. Please help as soon as possible!!!