Upgraded Battery and Sleeve for new X61s?

Hey Experts,
I just received my new X61s. Do you guys have any suggestions as to a better battery or a protective sleeve that I should purchase? I'd like to carry the laptop back and forth to class in my messenger bag with my books, and I'd prefer not to have to carry an additional laptop bag.
I'm not sure which battery came with the computer. I can only seem to find two numbers that may help the savvy identify it:
FRU P/N 42T5247
ASM P/N 92P1164
Thanks so much for any advice!

Thanks! Yep, I guess that's my inclination.
The old charger works fine btw (just that it has a small section of exposed wire).
I'll give it one more try with the SMC reset and if that doesn't work I'll probably send them back.

Similar Messages

I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

That pretty much eliminates all the user-serviceable parts the phone has.
When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.

How to setup MM costing and drive for new parts before ECM release key is triggered?

Hi,
I am on the engineering side of SAP ERP where I create new materials, BOMs, etc. We do this with a change master without release key today. We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM). The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production. There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed. Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
Thanks,
Joseph

the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

Urgent: Need a docking speaker with internal battery and suitable for ipad or iphone4

Need a docking speaker with internal battery and suitable for ipad or iphone4
Does the following model fit those requirements? Do you have any recommendation for me on a docking speaker?
Philips - Fidelio Primo Docking Speaker for Apple® iPod® and iPad®
Model: DS9/37 | SKU: 3374032
Philips - Fidelio Docking Speaker for Apple® iPhone® and iPod® Model: DS7550/37 SKU: 2141072
Philips - Fidelio Docking Speaker for Apple® iPod® and iPhone® Model: DS8500/37 SKU: 3792704

You should not need to have special IP address configurations to manage your devices and software. You can do this in the private network offered by any router, provided all devices being managed are behind that router. If for some reason you need a static IP on the network (such as for the server itself), then you can delegate one to the server in your router, but you dont need a special public IP address configuration from your ISP to set this up and make use of it.

Can i exchange my appe ipod touch cable and headphone for new one

can i exchange my appe ipod touch cable and headphone for new one

Only if they are in warranty and have factory defects.

Best approach to upgrade MaxDB AND move to new OS release

What would be the best approach to upgrade Contentserver MaxDB 7.5 on W2K server (32-Bit) to MaxDB 7.7 on Windows 2008 Server x64 (R2?)?
1. a) Upgrade MaxDB on the existing installation
     b) Create a complete backup
     c) Install latest release on new machine
     b) recover with backup from existing installation on new machine
2. a) Create a complete backup from existing installation
    b) Install same release on new machine
    c) recover with backup from existing installation on new machine
    d) upgrade to latest release on new machine
Both approaches share the problem that you have to run a OS/DB release constellation that is not released according to SAP PAM. The second approach has the advantage that the source system will not be touched and is still available in the original status if something fails. But the main issue is the compatibility question (7.5 not released for W2008, 7.7 not released for W2K)
Any suggestions?
Thanks,
Matthias

Natalia,
thanks for your answer.
> Do you have Content Server 6.40 ?
yes.
> the MAXDB version 7.5 is not released on W2008
neither is 7.7 on W2K.
> I recommend to go with 1 option.
Which would be this one:
>>1. a)Upgrade MaxDB on the existing installation
So can I upgrade to 7.7 on W2K though it is not released for this combination?
Best Regards,
Matthias

Initial battery charging time for new Curve 8900

Does anyone know what should be the Initial charge time for a new 8900 Curve?
Different sites say different things.........
Thanks.

Hi and welcome to the forums!
Here is a great link on battery optimization and charging, by JSANDERS:
The newer lithium batteries are addressed.
Thanks,
Bifocals
http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Cairo-compmgr-git and shadows for new windows

Hi, I'm using stand-alone Openbox and installed cairo-compmgr-git from AUR. Everything seems to work fine except for one thing, shadows don't get drawn for new windows, just for the ones I have already open when I run "cairo-compmgr -n". This doesn't happen with cairo-compmgr from the community repository, but with this version, conky windows have shadows. Xcompmgr-dana works fine also, but the entire screen flickers when dragging things around. Any ideas? Thanks in advance.

I got the same problem today after a normal update, now the cairo-compmgr from the community repo is having the same issue. I deleted the config file from ~/.config/cairo-compmgr and nothing.
Some help will be appreaciated

GID and UID for news

I have built packages for INN, a news server capable of being a private server with only a few groups, to a massive server running thousands fo groups, which seem to have a bit of a problem with what UID and GID the news user and group has.
The only news server that is an official package is sn which uses a UID of 9 and a GID of 13.
Is there an official place to lookup sub 500 UID's and GID's, and or register them for news or indeed any other user?

Hi Mohan,
On linux systems you cannot bind to ports lower than 1025 unless you are a privileged user (AKA root). On the other hand, you don't want to run a lon-running process like weblogic as a root user.
So the solution is to start up weblogic as privileged user, bind to low port numbers (usually 80 for HTTP, 161 for SNMP and such) and then weblogic itself changes the user that runs it's process to a low-privilege user such as "nobody" or a dedicated user you create.
Anywhere in this post "user" can be substituted for "group".
Hope I explained well,
Eli

$9.95 upgrade to Snow Leopard for new computers?

My son bought a MBP for college last month and was told he could upgrade to Snow Leopard for the price of the disks ($9.95, I think) when it came out. Now that it is announced, I don't see any info on this upgrade path. Can anyone help?
Thanks.

Fill out the form here:
http://www.apple.com/macosx/uptodate/

Sleeve for new (7/11) MacBook Air?

I'm looking for a recommendation for a sleeve for my new MBA. I bought the Incase sleeve from the Apple Store, but the Air swims in it. (I guess I should have realized that possibility, as the sleeve is also advertised as usable with a MBP.) I'd like something that fits a good deal closer to the machine. Any recommendations would be appreciated.

rooCASE Super Bubble Neoprene Sleeve Case Cover for Apple MacBook Air 11.6-inch Laptop
Fits like a glove.
http://www.amazon.com/gp/product/B004BQTSKC
http://ecx.images-amazon.com/images/I/61Tlzu-zVfL._AA1500_.jpg

IPhone 16 GB white - Issues - Can I pay to restock and exchange for new?

Hi,
My wife and I bought new iPhones on monday to replace our originals.
I have had nothing but troubles.
The first unit, the hold button broke and retreated into the shell - the exchanged it.
The second unit, the screen is way too yellow, ever after the update. Also, I have not been receiving calls. I went to genius and talked to AT&T, they say everything is working fine. Let us know if I keep having issues, etc. I think the phone is a lemon, my wife's 3G phone is perfect.
If i go back to the Apple store, and pay the restocking fee, can I just exchange for a brand new phone?

Apple will not accept a return for an iPhone purchased at Consumer Cellular. You cannot
add additional memory to an iPhone. If you wish one with more memory, sell
the one you have and use the funds received towards the purchase of the model
you desire.
You can return your current iPhone to your wireless provide, purchase one with
more memory at Apple and take that iPhone to Consumer Cellular to have them
activate it on their network. Before doing so, be use that Consumer Cellular will
accept iPhones not purchased directly from them and if they do, which models
they support.

I bought a new battery and charger for my macbook 13" and the battery wont hold a charge what can i do

i recently bought a new charger and battery for my mac book and it wont charge what can i do

Click here and request assistance.
(74911)

I understand there may be a new Apple TV coming out in 2014. Hopefully this could be a game changer in our lives and not just a product upgrade. I also understand that Apple does not except unsolicited ideas and suggestions for new products.

This is totally reasonable. That being said, understanding this is neither a "suggestion" nor an "idea", I was wondering how great it would be if the new Apple TV would have built in Radio Frequency control capability for all HT products. Comcast has RF control with it's new x1 box but it does not work with other components like a DVR, AV Receiver or other HT devices. Logitech offers remotes that one has to program with all the codes per individual manufacturer but this still requires an RF base station and external blasters.
                If the Apple had a relationship with the different audio/video manufacturers so that one could simply use an Apple TV remote ( or optionally use ipad, iPhone, MAC ) to control everything HT, then this simplicity would capture a huge audience in a big way!! Of course..........this is not a suggestion or an idea :-).
                Faithful Apple Fan, BPACK

You can submit feature requests to Apple customer service.
I was wondering how great it would be if the new Apple TV would have built in Radio Frequency control capability for all HT products.
No idea what you mean by HT devices, but it is unlikely Apple would release a product to support 3rd party devices. On top of which changing the ATV remote to be RF instead of IR would break all the existing remotes that are able to work with ATV. And would be MUCH more expensitve.
Comcast has RF control with it's new x1
Only becasue they HAVE to because they only provide one actual cable box, with other dumb box termtinals.   So remotes have to be able to work in other rooms since they all have to connect to the real cable box.
but it does not work with other components like a DVR, AV Receiver or other HT devices.
Right, since once you switch to RF you break compatablity with all the other IR devices out there which is pretty much 99% of them.
                If the Apple had a relationship with the different audio/video manufacturers so
Apples whole business model is locking out other manufatures.

About using categories and perspectives for new user

We are just beginning a conversion and upgrade project to convert our Web site to Oracle Portal. I'm trying to get a good handle on some different things we need to resolve as part of the project. One of the first decisions is using Categories and Perspectives.
I'd like to ask users about how they have used categories and perspectives and some real-world examples of how these work and improve the site and user experience.
About us
We're a big nonprofit river authority and wholesale electric provider in Austin, Texas. Currently, we offer very limited online transaction capabilities. However, we are diverse organization and users come to us looking for every specific information, so these elements may be very helpful. I'm evaluating how we can use these and other elements to make recommendations. Some real-world examples and best practices would help a lot.
Thank you, Charles Boisseau
Web editor
Lower Colorado River Authority
[email protected]

Continuing the thread...
Perspectives and categories may be leveraged in custom search portlets, so that you can enter the content one time, in one place, and have selected content display in multiple places.
Re: our "news" concept: our central communications group posts news stories tagged with one or more perspectives, such as which school is related to the story. This allows us to keep all of our news stories in one page group, but reuse the content elsewhere. For example, for the School of Nursing intranet, we can use a custom search portlet that automatically displays only that school's stories.
You'll want to do some up-front planning regarding your classification scheme. One significant limitation of both categories and perspectives is the inability to change the hierarchy. Oracle Portal product team, if you're reading this, this is a serious pain! I might also recommend leaving your classification scheme relatively flat. Tagging content with perspectives becomes more difficult if the content contributor has to visually traverse a deep hierarchy of perspectives.
Categories work similarly, but we mainly use them to visually sort items on a page using the "Group By" feature of a region.
Hope this gets some gears turning.
-John

Upgraded Battery and Sleeve for new X61s?

Similar Messages

Maybe you are looking for