Upgraded Firmware now setup page wont open

I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page, any suggestions??
Solved!
Go to Solution.

Don't know what happened, but it magically worked before I tried to ping it. Of course upgrading the firmware didn't help the speed at all so it was a waste of time, for my first experience with a router it is starting to look like I made a poor discussion in brand. I have spent more time fixing this thing then enjoying it, well time to make another post thanx for the help.

Similar Messages

  • Updated my computer to OSX Yosimite 10.10.2, and now my IPhoto wont open

    Updated my computer to OSX Yosimite 10.10.2, and now my IPhoto wont open. It said I needed to update to the newest version of IPhoto through the APP store, so I tried, but it has been stuck on 'INSTALLING' for hours. All of my mothers wedding photos, as well as the photos I need for school are in there! HELP!

    Until you Upgrade to iphoto 9.6 you will not be able to use iPhoto
    You can try canceling the upgrade and re-starting it
    LN

  • OS upgrade and now iTunes won't open.

    I work for a computer repair shop. I am not a tech, none of them are in today due to unforseen circumstances. A client called, she had her OS upgraded to Snow Leopard (OS X 10.6?) on her (white) Macbook and now her iTunes wont open at all. She said she tried opening it multilple ways, but when she clicks on it in the the dock it doesn't do anything. She thinks she has the right version. Any ideas?

    Reinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
    You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
    If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
    In the MAS, hold option and click Purchases to redownload Lion
    FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
    See this for more info
    https://discussions.apple.com/docs/DOC-3046

  • I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. please help

    I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. it stays on the opening screen and the message
    shows up that I must update the mediathek. If I click on update the program shuts down. How can I fix this?

    I downloaded the new iphoto and the upgrade
    Does that mean, you are running iPhoto 9.6 on MacOS X 10.10.1 Yosemite? Or are you using an older MacOS X? "New" iPhoto is relative and depends on your system.
    If I click on update the program shuts down. How can I fix this?
    Does "shut down" mean it crashes?  Then post please the error log from the error panel here - copy and paste the report into your next answer (the first 50 lines should suffice)
    Where is your iPhoto Library (Mediathek) stored? Have you moved it to an external drive, or is it still in your Pictures folder (the order "Bilder")?

  • I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

    I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

    Do you mean that the old version of iMovie (which version?) worked until you installed the FCP trial?
    Note that you can only transfer projects from the latest version of iMovie (10) to FCP 10.1
    Geoff.

  • App page wont open

    my app page wont open says somthing about an error report

    Hi,
    Could you please share more information on exactly what you are trying to do?
    Thanks,
    Ankit

  • Enable https on Apex application and now the page wont display

    Hi,
    I enabled https under security, instance on Apex application and now the page wont display. Please help because I wanted to start using https on my url

    Hi,
    I enabled https under security, instance on Apex application and now the page wont display. Please help because I wanted to start using https on my url

  • Did the requested upgrade and now iTunes won't open for anything

    I upgraded to the newest version and now iTunes wont open, no error message, nothing. It looks as if it's going to launch when I click on it but nothing happens. This Happened last time I upgraded but it worked itself out after a few mins but this has been all day... nothing is working.
    I tried to plug my iPod in and not even that will launch iTunes.
    In a similar topic it was asked if QuickTime would launch, my QuickTime will open but it has been loading for 2hrs now.... WHATS GOING ON?!!???
    Dell dimension desktop   Windows XP  

    Me too... The other post relating to this was with a PC but the same is happening for macs too by the look of it. Has anyone got an idea of how to sort this out? I don't suppose it's possible to find an earlier version of iTunes to download? I'm going to have a search now cos I need iTunes to be working!

  • E65...Settings page wont open, and reminders stuff...

    hi, i just got my brand new e65 for christmas.
    Problem #1:
    about 3 days ago i went to open my settings and found out it would not open!!
    what happens is i go into menu...all is normal,
    i then go into tools...all is normal,
    then, once i click on settings, the page opens with only the theme background...nothing else! it then stays like this for about 30 seconds and then goes back to the tools menu page!!
    can someone PLEASE help with with this!! how do i fix it!? or do i have to take it back to the shop...or what...???
    Problem #2:
    2 nights ago i had a reminder (meeting) set into my phone. it was set to go off at 8am. at about 4:45am i got woken up my my phone buzzing. i looked at it and the reminder was on the screen. i looked at the time (on the phone) and it said it was 7:45am. it was pitch dark outside so i knew it wasnt that late! so i looked at my clock in my room and it said 4:45am!!!!
    so i close the reminder, and went back to the main screen, i was just about to go into the time and date settings because i thought the auto update might have some how changed its own settings or something, so i did it, and sure enough soon remembered my settings wont open (it was 5am! give me a break! lol) so i got out of the menu and then the clock decided to read 11:55am!! **bleep**!!!
    this morning, another reminder was suposed to go off. ahain at 8am. but this moring, i woke up a 11am, looked at my phone and "to my suprise" (not) there as no reminder to be displayed...at all! and ontop of that...the clock read 7:27am!! **bleep**! so i went into the calendar just to check if i set the reminder for the right day (i did) and when i got out of it..the **bleep** clock said it was 5:16am!!!! W H A T T H E ! ! !
    so if ANYONE has ANY insight into what the hell is going on with this damn phone...PLEASE fill me in!!! haha
    oh, p.s. sorry for the novel! had to give all the details!! haha
    oh by the way, the time is 12:31pm on my phone right now...its actually 10:17pm!
    Message Edited by xashx on 06-Jan-2008 12:18 PM
    IM OVER TECHNOLOGY!!!
    i swear i have something in me! everything to do with technology either breaks or doesn't work for me!!! it sucks...

    ****UPDATE****
    okay i think this phone is possessed or something!! lol
    just as i was looking in the main Eseriers page i notice that first topic post from the administrator or whoever. and i was reading about the updates ect. as i was doing this i turned off the phone and turned it back on to get the clock right again. as it was turning on i decided to start downloading the software updater. as this was downloading the phone came back on with the same time (the wrong one 12:40pm) so i looked back up to okay the download...looked back down and the right time was on it!
    **bleep**!
    so i randomly decided to go and see if the settings page would open...and...OH! what do ya know!! it opened!! how convenient! just as i was downloading he update!!
    W I E R D O R W H A T! ! !
    what is going on with this thing!!??
    IM OVER TECHNOLOGY!!!
    i swear i have something in me! everything to do with technology either breaks or doesn't work for me!!! it sucks...

  • Recent update to 10.6.8 and now Finder app wont open.  Error 10810

    I cannot open finder after a recent update.  I get one error messages such as The application Finder can't be opened. - 10810.
    On reboot I get nothing but "finder quit unexpectedly"
    Can anyone help?  Im pretty much a novice and only recently upgraded to Snow Leopard and now Im pretty much dead in the water without the Finder app.

    Followed the directions on the Snow Lepoard disc.  Then did updates to bring it up to the 10.6.8
    Unfortunately I did not backup first.  I thought Time Machine could help but it wont open either. 
    Not sure what to do now.  Should I try to re-install snow leopard?

  • WRVS4400N v2 - upgraded firmware, now old and default passwords don't work

    Hi,
    I upgraded the firmware for my WRVS4400N v2 to version 2.0.2.1 firmware, now old and default passwords don't work. I have tried resetting it as well, and the default password does not work. Any suggestions?
    Thanks

    Okay, problem was using IE9. Changing to another browser (FF5) allowed access. Strange... Anyone know by IE9 wont work? It has worked in the past.

  • I upgraded and now it will not open

    I upgraded my iphoto and now I can not open it.  It told me to upgrade using the iphoto library upgrader,  I did and still not working..

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what do you see when iPhoto opens?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • Downloaded new version  and now itunes store wont open

    downloaded newer version of itunes old one worked just fine now it wont open itunes store the bar gets half full and doesnt go any further

    Even though you've got a newer version of iTunes, it might be worth checking through the following document with that one:
    iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store

  • Can't upgrade anymore but file still wont open?

    So i have this project that won't open. I have a trail version on 2014.1. my friend says it works on his bought version which seems to be 2014.2. Is this really the reason the project wont open. When I try It says- This project was saved in a newer version of APP and cannot be opened in this version?!
    Please help thanks,
    Ben.

    I found this thread on the kdemod fora.
    http://chakra-project.org/bbs/viewtopic.php?id=1190
    Just change to testing until the 'big' changes are made. Updating my computer now.. :-) 'Testing' doesn't sounds really safe but i'm just gonna do it..
    And lol, even pacman is replaced by a kdemod package.. :+ kdemod-pacman .. :')
    Last edited by WernerL (2009-08-08 12:35:31)

  • Hi, im trying to update my itunes to the latest update 2013 and i keep getting the error 2324 and now my itunes wont open at all...did i loose all my media i dont know what to do next please anybody help me thanks

    hi, for the last 3 hours i ve been trying to install and update itunes to the lates update....before my itunes would open just like i want it to  and ever since i tried updateing to the new software my itunes wont open i get a code 2324....i realy dont want to have to put itunes on a diferent computer....please help on what to do to fix this and get my library back cause it wont open....please desperately need help
    Laura Brown

    The first step is to try this Microsoft fixit:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    If that doesn't work we will have to try something more complicated. It is a could not open file error message from the installer.

Maybe you are looking for

  • How to enter a query into a role

    Hello Everyone, We are starting to look at the new analyzer.  We cannot find how to Enter a query in a role.  In the old analyzer there was a button called this.  Where is it in the new analyzer?  How to you enter and assign a query to a role? Thanks

  • Terms of Payment consideration in Price comparision of Quotations

    Hi, While Price comparision of the Quotations submitted by vendor, can I take the Payment terms into consideration? If so how? I have given the terms of payment in the quotations but it is showing as an additional information only in price comparisio

  • Can a TOC be inserted into a text box in Pages?

    Good evening. I am part way into creating a first document in Pages. Things are going well, for the most part, though I admit there is a learning curve here. One problem I am encountering is getting a Table of Contents (TOC) to generate inside a text

  • [N95 8Gb Pc Suite]Impossible to synchronize : "syn...

    Hello, My config : - Windows XP SP2 - PC Suite 6.85.14.1 - Nokia N95 8 Gb (v15.0.0.15) - Lotus Notes 6.5 - synchronization parameters : bidirectional, agenda and contacts The problem : Everything was working fine until the last few days. I can't sync

  • Two Communication Server in the same Server ?

    Hi All, do you know which are the steps and recommendations to install TWO Communication Station in the same server (Windows 2003) ? The first one is connect to CRM develop system, and the second one to the CRM Quality System. Regards, Davide [email