Upgraded from 10.3.9 to 10.4.7 and now need "updated" iDVD to make movie?!
Story is- imported my clips (on top of which they were muxed and had to be converted! Darn Sony!), edited them and decided to do without iDVD chapers and go straight to "Create iDVD Project".
Won't work- message reads "Compatible version of iDVD required. This feature requires iDVD versions 3.0 or later. Please blah, blah, blah."
Now- last I checked you got both iMovie AND iDVD in the same package and I am not sure why my Tiger upgrade has left me up the creek without a paddle.
iMovie pans out to be version 4.0.1 and lo and behold there is NO application iDVD at all on my poor bemused G4 PB!!!!
What did I do wrong (if anything) and what do I need to do right to fix this?
Thank you one and all!
Sorry it took a couple of days to get back here. Life is a bit hectic. Erm- thanks for that! I have not yet made a iDVD move so will bear what you say about the extra and unneccessary rendering in mind.
I never got the iLife CDs (PB is pre-iLife CDs) so will search on the install CDs. Seems mightily daft to me... Question- seeing as I got Panther with the Powerbook (specifically OS10.3.5) and then bought a single upgrade CD for Tiger which I only just installed (and which is the reason why this is happening I think) what is going on? Did the Tiger install sort of "remove" my earlier version of iDVD?
OK- on the Sony- it is a still camera's short footage which shows up as muxed. So it is not a DV import but a QT .MPEG file which was dragged off the memory stick. Not to worry- I found MPEG Streamclip to be an ace bit of kit and so simple to use.
Thank you SO much for your help. I can happily make my films once more!
Similar Messages
-
Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all!
Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all! Im using Logic 7.1 Everything was fine till I upgraded.... Now when I click to open Logic it never gets past the startupscreen, and then I get a message saying "Logic has unuexpectedly quit" and I get an option to either close it or restart it or report it to apple, whatever option I choose freezes Logic and I have to right click it in the dock to end the program because it is not responding. Any help is really appreciated! I have wirk I need to get done! (teaches me to upgrade in the middle of a project... what a rookie mistake!)
Repeat after me...
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
Especially as big an upgrade as a whole new OS!!
O.K. for starters, have you done the routine maintenance, repairing permissions, etc..?
Have you installed the Pro Application support specifically for Tiger?
Let's start there... -
I uninstalled Beta 4 and re-installed 3.6.13 now Firefox will not open at all I tried to uninstall to start again but it will not uninstall either it does nothing, I have been using Firefox for a long time but cannot resolve this problem can anyone help and give me a solution please. As I use Firefox as my web browser it is very frustrating.
The fact it will not uninstall appears to be something completely new as nobody I know who uses Firefox has ever encountered this in the past.Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls
If necessary then also see:
* http://kb.mozillazine.org/Browser_will_not_start_up
* http://kb.mozillazine.org/Error_loading_websites -
when I go to my roboform to signin to my fidelity account firefox won't accept the sign in or password
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Upgraded from some very old Firefox version (16?) and now I'm not getting the new UI
I was having a pretty old version of Firefox (16?) and decided to upgrade it today. So I updated using the following steps:
1) Click orange Firefox menu button
2) Help> About
3) Click Check for updates and click update
But after Firefox updated I noticed that I'm not getting the new UI. Please take a look at the screenshot. I'm seeing the following issues:
* The Aero theme is not present. I'm still getting the old theme. Look at the top - there is no space above the tabs
* Got a huge right click menu (solved after updating Firebug)
* Buttons and UI is still old. Look at the Back/Forward buttons
* Bookmarks button is not present (in the website it shows on the right side next to the search bar)
* The whole browser still feels like the old one only when I'm scrolling around and surfing. I used the ne v22 in my office workstation and that felt more sturdy and crisp. I don't know whether this one is running on the old engine or some update didn't happen properly.
Please see the screenshot attached here: http://oi43.tinypic.com/keaesk.jpgBump. Could someone please help me to restore the Aero look to FF?
-
I upgraded from an iPhone 5 to an iPhone 6 and now iMessage isn't working
I just went from an iPhone 5 to and iPhone 6. Maybe I activated it wrong? I followed the steps and put the SIM card from my 5 into the 6. I've turned off iMessage and facetime on the 5 however I can't recieve any iMessages. Sometimes I can send iMessages and sometimes i can't
Denise539
Thank you trying those steps out. i want to you to review a few things on the phone. Is you Cellular data turn on? Settings>Cellular Data should be green When you access "Messages" in settings, are you able to turn '"iMessage" on and off? Provide us more details to resolve this today.
YareliM_VZW
Follow us on Twitter at @VZWSupport -
I keep getting a message about my disc being unable to be repaired and it wont install the mountain lion or my old 10.6. Any suggestions??
Your HD may be damaged, simply restart in the Recovery Patition (hold down Option key on start up tone and choose Recovery) then open Disk Utility, choose the internal HD and run Repair Disk, if any errors appear after the 2nd or third pass your HD is probably damaged and needs to be repaired.
-
iPhoto says it won't import photos from my Fujifilm Finepix S1000 camera because it's the wrong format (jpeg). It always has before... but I upgraded to Lion then went back to Snow Leopard and now it's not working. Suggestions? Thanks!
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
Hi, I upgraded from iOS 5.1.1, to iOS 6, and it's ridiculously slow, I can't sync to my computer, (manually manage music), and all of my photos were gone. How can I get my photos back? It says restoring photos, but it's said that for two days now!
It just does't sync. I connect it to itunes, but nothing happens. Where it says how much space I have, it's just on ebig bar that says other. I can play my music on itunes, but not when i unplug it.
All of my photos were gone, i took and saved them with my ipod.
The photo app is saying restoring.
What should i do? -
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again? Just a patch/update or do I need to uninstall and install?
antoniobesteban wrote:
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
Where are you seeing that information? Got a link?
According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
Plenty of people, including me, are currently running CC on Mavericks. -
Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?
If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck. -
Could you tell me please why I could not do the upgrade from Adobe Lightroom 5 to Lightroom 6 ( standard version not CC ) !? I make the payment, I have the confirmation of payment, i have the license key, but when I want to download my upgrade, i receive the message "413 Header Length too large". Thank you. Catalin Mihaescu from [email protected]
Are you using Chrome? I noticed these errors on Adobe's website redesign using Chrome. Try a different browser.
-
How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?
Hi Raymond,
I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
Thank you for posting on Adobe Forums. -
Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.
Hey Ian
That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Thank you for using the Apple Support Community.
-Norm G. -
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.
Maybe you are looking for
-
Two storage location concept in EWM AFS ROD.
Hi Experts, This post looks very old so opening a new thread. http://forums.sdn.sap.com/thread.jspa?threadID=1563967 As mentioned I would like to know the working of AFS and ROD storage locations in EWM. ROD -- F1 Unrestricted in putaway , AFS
-
URGENT. I keep getting error update 27 while trying to update my iphone 5s to 8.3!!!!
Okay first things first I already tried to update it over the air but then it got into a bootloop which means it won't go past the apple logo screen when i try to turn it on. So i got it into recovery mode and i've been given two options: to update i
-
How to Use "IR IN" and "SERIAL OUT" Connectors
I tried an LED connected to a mini plug to see if I could place it in front of my concealed cable box, but there is no signal coming out of either connector. How do they work?
-
Difference among the reporting tool
Hi There, I am new on Hyperion, I am wondering what is the differences among these reporting tools: 1. Interactive Reporting 2. Financial Reporting 3. SQR Production reporting
-
Single photo removal from iPad2 files
How do I remove pictures from files/albumns without removing them from other files or albumns. After copying pictures from "Photos", Last in or dated Events file into a newly developed titled albumn, I've tried to delete the original picture from the