Upgraded from 10.5 to 10.6. IP Printing not working?

Hello,
I recently upgraded from 10.5 to 10.6 Snow Leopard and as I knew, our Appletalk Printers no longer showed up. I knew this would be the case and tried adding the printers via IP. I've printed out the spec sheets from the printers to obtain the IP addresses. I entered them and from what I can tell, everything went fine. It said it was a valid IP and each of the printers showed up under the list of printers. When I went to print none of them work. It says it can't find it on the network. As a side note (or possibly the problem) when I found the printers via IP address, it did not put the name of the printer in the name field but the IP Address itself. Is this normal and can I change the name to the actual printer name OR should the printer name show up automatically?
Here are the printers:
HP Laserjet 5000
Kyocera 5035
Kyocera 1650
Here is what I've tried:
1. Software Update… until I could update no more.
2. Updated all print drivers. Each of them show up in the "Select Printer Software" dropdown menu.
3. Reset Printing System in the Print & Fax menu.
4. Replaced the "CUPS" directory/older via this links instructions. http://www.gcsdblogs.org/roodhouse/?p=2349
I am currently repairing permissions. Right now the estimated time is 2 HOURS. Incredibly long but maybe due to the upgrade??
Any and all help would be appreciated. Thank you in advance.
Randy

Addition:
The repair permissions/cup folder move I mentioned above did not work. I have now also tried changing the ownership of one of my kyorera files to "root" as mentioned in another post on here yet that did not work either.
Thanks again for any help you can provide. I keep scouring these forums but have yet to find anything.
Randy

Similar Messages

After upgrading from 4.6C to ECC 6.0 templates not working in smartform

Hello,
After upgrading from 4.6C to ECC 6.0 templates not working properly in smartform, although value is flowing to the point the template is getting called and inside the template there are text elements where placeholders are kept to display the value, when the print is taken there are no values being displayed by the text elements.
Please note - Text elements doesnot have any conditions present in the condition tabstrip.
Thanks,
Abhishek

Hi,
After the upgrade, you will have to do the security upgrade.
Please follow these steps.
1. Go To SU25
2. Run step 2A to 2D.
3. In step 2C, you shall get the list of all the affected roles.
Click on first role. It will take you to authorizations of that role. Click on the "New" tab there to find the new objects added to the role after the upgrade.
Note: You can open the same role in the unupgraded system to check.
4. Provide the access to the required authorization objects.
5. Disable the unwanted authorization objects.
6. Generate the profile.
7. Follow the same steps for all the affected roles listed.
Please note that you will have a list of new objects added.You need to maintain them inorder to avoid any access issues.
8. After step 2C, complete 2D.
Regards,
Imran

I just purchased the upgrade from trial to full version. It does not work. It asks for my orginal serial key and when I paste in the trial key it says invalid??

Downloaded trial and then purchased the activate the full version option. The activation keys don't work. It wants an 'original' key. When I use the trial key it rejects it as invalid! Have I just been robbed of 75 quid?

lanceblack,
You know, I had seen your similar post in other forum with same issue. This itself is confusing for other participants including myself to keep track of forum discussion regarding same issue.
It would be nice if you keep your issue in proper forum in one place, less confusion for others.
Corky02 said better than I did yesterday. I am not quite sure why or what impresssion that you'd easily upgrade from try-out app into full-license. For many people are aware that what it means or what does this having to do with upgrading qualification with any applications. Why did you think you would get to upgrade that easily from trail try out app to licensed one?
I don't think the Apple's ads are misleading. I just think you got yourself confused. Sorry I can't help you. IF I am Apple employee, I would love to help you and get this resolved for you. I am just one of those participants helping others.
Once again, I am sorry that you get your view all wrong and lead into thinking that you are entitled to do so. But you need to understand that once if you had purchased a full license app from try-out app. Most people know what does that mean with try out app for the first time. And most people know that if they wish to purchase an application, this means purchasing a boxed (or electronic downloaded file) from Apple retail store (or online store). Plus, new venue at Apple offering Mac App store. I think that is a little confusion for some people who are not familiar with the difference.
I do believe that if you purchase from Mac App store, it doesn't require to put in license serial number. I think it is a different approach for some reason. I had bought some other Mac apps (not Aperture) from Mac App store few times. I haven't purchased Aperture updated version straight from Mac App store online. I bought mine from Apple retail store in Canada in person.
I still don't understand why you still think Apple is misleading you all the way. I don't think it is. In case if you haven't notice... there is way for you to get in touch with Apple called Apple Support Express Lane. Give it a try.

Upgrade from Bootcamp 3.0 to 3.1 does not work - error 2229

Hi,
I´m running Snow Leopard and Win7 on my MBP 2008, each at 250GB HDD space. I installed both together. Before, I had Win Vista and Mac OSX Tiger installed and hardware worked in both OS´s. But I had to exchange my HDD and install everything from scratch. Ever since, I can´t use right click on Trackpad or Bluetooth properly in Win 7. In Snow Leopard, everything works fine.
I found out a couple of different ways trying to fix this, but nothing worked. Now I found the hint to install this here http://trackpad.powerplan7.com/ but this requires the previous installation of Bootcamp 3.1. Problem is that I have Bootcamp 3.0 installed (with bugs, as said before - meaning trackpad etc. is not working properly).
Anything I try fails - I can´t install single drivers from Bootcamp CD (it says it worked, but nothing happens), I can´t upgrade to Bootcamp 3.1 (still the error "2229")...
So I´m lost at the moment and try to always have an external mouse with me, that´s USB connected.
Does anyone here know better ?
Thx,
Simon

I dontknow if this will help you or not, ut back when the BootCamp v3.1 update came out, there were a number of people who could not get it to install. For many of them it was that they had a third-party software installed which added a display-adapter to their system (LogMeIn, etc.) If you have anything like that installed, try un-installing it first, then reboot, and try the bootcamp install. If that works, then you can easily re-install the other software again (although you may need to uninstall it again fr the next bootcamp update).

Upgraded from Iphone 4 to 5s and text iMessage not working

Hello,
I've just upgraded my phone from a 4 to a 5S. In the store the clerk called my
phone to make sure it was working. Before I got home my wife had sent me several
texts that went to my old phone. After getting home I went through iTunes and restored
my new phone with the contacts/apps etc from my old phone. I've tried logging out
of all iTunes, FaceTime, iMessage etc on old phone but still can't get new phones iMessage
to work. Also reset old phone and removed SIM card. Any suggestions to fix this?
Thanks for your help.

Chris,
Thanks for the speedy response. To answer you questions:
No- iMessage has never worked.
It recognizes my new phone number when I look in the cellular
settings. In the messages settings I can't find my phone #, just turn
iMessage on/off, sign in with Apple ID which I've tried, SMS and a couple
other items that's it. No send and receive options.
iMessage is not activated.
My wife sent the texts to my phone number not my Apple ID.
I'm not getting anymore messages on the old device.
I got one text on the new phone from a buddy with an iPhone but
it was just a SMS text.
I hope this info helps.
My phone works though, I just checked, just iMessage/FaceTime
and texts aren't working. My wife sent me a text that neither phone
has received.
Thanks

Just upgraded from Mountain Lion and now some programmes do not work. How to go back to Mountain Lion

Just upgraded to Yosemite from Moutain Lion. Want to go back as it refuses to run some programmes

Yosemite/ OS X Mavericks: Revert to a previous OS X version

I upgraded from 10.3 and now "Connect to Server" not working!

yesterday I upgraded my co-worker's computer from 10.3 to 10.4, and for some reason he can connect to the internet but he can't connect to our server. We ususallly go to "Go to Server," type in our server address and then that window will go away and a new window will pop up showing that it is searching for that address. However, when I click on "Connect" the window remains and nothing happens. Thus we cannot connect him to the server, although he is able to connect to the internet with no problem.
Any suggestions?

what about trashing the finder preferences? did you try that first? I was thinking of trying that....

Upgrading from iOS 4 to iOS 6.1.2 not working

I regrettably jailbroke my 4th gen iPod touch back on iOS 4 and tried to upgrade to iOS 6.1.2 today but the iPod is stuck on the screen with the usb cable and the arrow pointing to the itunes icon.

Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

Upgrade from 10.5.8 to 10.6 does not work on MacMini

Hi
I tried all advices given on the support pages, well, all but removing my boot volume, as I installed many different programs, but neither an upgrade nor an installation of snow leopard does work.
I always get the message like: volume cannot be used to start the system
the only thing I did some time ago was installing ubuntu and thus repartitioning the internal disk (resizing the MacOs partition and adding an ext3 partition an a swap partition)
any help appreciated, cc

Welcome to Apple Discussions!
A Mac Mini with only 2 USB ports on the rear can't have Snow Leopard installed.
A Mac Mini with more USB ports can only install Snow Leopard, if at least 1 GB of RAM is available. Go to Apple menu -> About This Mac. If it is says 512 MB of RAM, that's not enough. So even if the hard drive is formatted properly, your hardware must also be ready for it.

Upgrade from Ps CC Trial to Purchased Ps CC not working

About two months ago I downloaded the Photoshop CC Trial. Last week I purchased the Photoshop/Lightroom combo. Lightroom I downloaded and it works fine, however, everytime I go to launch Ps CC it tells me that my trial has expired. I have attempted multiple uninstalls and installs and I am still having the same issue. I even uninstalled every Adobe program on my machine and reinstalled and that didn't work either.
I am running OSX 10.9.2
If anyone knows of a solution to this problem, that would be great.
Thanks,
Sam

Did you run the cleaner after uninstalling?
Discussions of RE-installing
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
 Cheers, Tom

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will let me update

I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will not let me update and closes Bridge down.
I have uninstalled and reinstalled 3 times and still no success. Any suggestions?

What system are you on? Did you run the Creative Suite Cleaner Tool inbetween your install attempts? If not, try that to produce a "clean" install with factory defaults. Other than that there could be some specific system issues at play, but again, we'd need to actually know what system you are on...
Mylenium

How do I upgrade from PS cs5 to CS6? I am not interested in the cload.

How do I upgrade from PS cs5 to CS6? I am not interested in the cload. Please tel me the URL.
[email protected]

You can only upgrade online from Adobe.
See http://www.adobe.com/products/creativesuite/upgradeinfo.html

Upgrade from Elements 7 to Elements 11 poses printing problems

I upgraded from Elements 7 to Elements 11 and now when I print a photo using Elements 11 it is extremely dark (almost black). I am using an Epson R1900 Photo printer and the same settings for printing in both Elements 7 and 11 and can't figure out why the pictures are too dark in Elements 11. Can anyone help with this?

Thanks for the ideas:
Yes, printing in the OS Print program (Windows 8) does produce better
photos than directly through Elements 11. Also, printing from the Elements
Organizer produces the better photos I am looking for and can obtain from the
Editor in Elements 7. I still wonder why the Elements 11 Editor produces
almost black pictures? But at least I have some alternatives for printing
better photos after I have used the Editor and saved the corrected photo.
Corvettelarry.
In a message dated 1/14/2013 8:19:44 A.M. Eastern Standard Time,
[email protected] writes:
Re: Upgrade from Elements 7 to Elements 11 poses printing problems
created by andaleebfatima1
(http://forums.adobe.com/people/andaleebfatima1) in Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4991885#4991885)

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

After upgrading from ITunes6 on ITunes 7 my videos doesn´t work

after upgrading from ITunes6 on ITunes 7 my videos doesn´t work. there are no error messages, popups or ballons. songs are no problem, only the videos?!
Can somebody help me?
Thanks
Cross

hmmmm. let's try checking to see if they will still play in your current version of QuickTime.
in itunes, right-click on one of the videos that is causing the grief, and select "Show in Windows Explorer".
right click the icon of the file in the Explorer window that comes up and select "Open With ...", and try to open it with your QuickTime player. does it play there or do you get funny business with that too?

Upgraded from 10.5 to 10.6. IP Printing not working?

Similar Messages

Maybe you are looking for