Upgraded from 11 to R12 -- GL,AP and FA modules

Hello All,
I need help on configuring R12 environment. We had GL,AP and FA modules in 11i which is upgraded to R12 envt, I need to do the initial configuration steps for these modules so that they are up and working for the end users.
I would appreciate if someone can detail the steps for me.
Thanks
Madhav

if you had upgraded from 11i to R12, pls follow guide on below link
http://download.oracle.com/docs/cd/B34956_01/current/acrobat/r12upg11i.zip

Similar Messages

Upgrade from 11i to R12 - Custom Forms,Reports and Workflows

Dear Community Friends,
We are planning for upgrade from oracle apps 11.5.10.2 to R12.
We have custom Forms,Form Libraries,Reports and Workflows.
Kindly provide me for approach on how to migrate Custom form libraries,reports and Workflows.
I beleive, this thread will exists as one shot point for custom forms,reports,workflow upgradation from 11i to r12 with detailed steps.
I know that many links exists here in the forum for all the above objects mentioned,but still from all those i am able to get a clear picture for oracle forms but not for custom form libraries ,reports and workflows.
Also,this post will provide a low level,practical picture of the steps for those who are in line with this.
Links i have read for all these in our forum are:
For Custom Forms,
Re: Planning to upgrade from 11i to R12
Re: Custom forms: After upgrading 11i to R12
ofcourse,'n' number of links exists providing metalink notes also.
Hussain,Helios and some others also has given many updates regd this.
For custom workflow upgradation,
Upgrade Workflow 11i to R12
Workflow Upgrade
Workflow Upgrade
For reports,links mentioned the below metalink notes:
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.
Thanks,
Ganesh
[email protected]

Per my understanding, after searching in many threads,i am here by summarising the practical low level steps for custom forms migration
Please correct me,if i am wrong.
1) Download the Forms(.fmb's) and all PLL's(all the PLL from resource folder in AU_TOP) into a Local Machine Folder
2) Open the forms using Forms Developer 10G and connect to DB
3) Compile by clicking compilein Forms Developer and then save it.
4) Upload the Saved Forms(.fmb's) into the new R12 server(system) in the respective custom paths(paths similar to 11i Server)
5) Compile all the forms using the command like below(example command is shown below or f60 gen commands or frmcmp.sh utility) in the respective custom form paths,
this will generate the .fmx's.
frmcmp_batch module=FORMNAME.fmb userid=apps/apps output_file=FORMNAME.fmx compile_all=yes
Link for compiling forms: https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=359210362972527&type=DOCUMENT&id=1085928.1&displayIndex=3&_afrWindowMode=0&_adf.ctrl-state=c348xvwbg_98
6) Open the form and check in R12 instance
As per my understanding for custom form libraries,we can just copy paste the PLL's from 11i server to R12 server (Please correct me,if i am wrong)You are right, and the steps mentioned above should be sufficient.
Can anyone please help me out in custom reports and custom workflows.Sorry that,i could not get a practical and clear picture for reports and also for workflow even after referring many threads and metalink notes mentioned.
As for reports,some says that Developer Suite 10g can be used and .rdf can be used in R12.
Some says that reports should be converted to XML published as reports does not exists in R12.
So,i am not clear on this.You can still use RDF files in R12, and just follow the approach you mentioned above, and you do not have to migrate them to XML publisher (though it is recommended, but this can be done after the upgrade as an enhancement task).
For custom workflow, you need also to do the same thing, open them using workflow builder and make sure they work in R12 (correct the code if required and save them again in R12 once they work properly).
Thanks,
Hussein

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Inventory Module Upgrade from 11i to R12 - How to Copy Inventory Orgs.

Hi All,
We are working on R12 Upgrade project for Item Conversion.
Requirement is to upgrade and bring all the Item setup and data from 11i to R12.
As part of setup requirement, there are around 1900 Inventory Orgs in 11i instance. Please let me know what is the best approach / strategy to copy and bring over the 1900 Inventory Orgs.including the Master Org from 11i to R12.
Your inputs will be highly appreciated.
Thanks in Advance !
Regards,
Nityanand.

Reporting Set of Books (MRC) in 11i is called as Alternate Currency Ledgers (ALC Ledger) in R12.
After 11i upgrade, the reporting SOBs (MRCs) will be automatically changed to ALCs in R12.
Some are primary and some are used as reportingI hope you are talking about MRCs.
When we upgrade from 11i to r12, all the SOBs would be created as primary ledgers (as per oracle)If they are not MRCs and it is getting upgraded as primay ledger, you may create new ALC for your requirement.
In that case you may need a datafix from Oracle to fix the old data.
By
Vamsi

Upgrade from 11i to r12 application servers with Discoverer 10g

Hello, one and all.
I have recently upgraded from 11i to r12 Oracle financial application server, after much patching and testing we finally came to the Discoverer application server.
Most workbooks open fine, however it seems that some of them (about 3%) reference columns that no longer exist in r12, for example, SET_Of_BOOKS_ID has become LEDGER_ID in r12 on the gl.gl_je_lines table.
This causes any workbook that references that business area to return an error 'Database Error - ORA-00904: " O974567"."SET_OF_BOOKS_ID": invalid identifier.
Well and good; I think that that's caused by the EUL not being refreshed after the upgrade, so I go to the Discoverer administrator and refresh the general ledger Business area. This unfortunately renames several objects inside the business area, including SET_OF_BOOKS_ID to LEDGER_ID, so instead of that error, we now get several 'Missing item or condition' errors until the workbook will not open at all with an 'Item dependency "" not found in the EUL.' error. This i assume is because the workbooks still reference the old items.
I'm guessing that several Business areas and objects therein have been renamed since nearly none of the workbooks will open now. I have restored the EUL from a backup (imported all the *.eex files) however I was wondering if anyone had faced this issue.
I apologize as I have very little understanding of Discoverer and this might be a simple fix, but I'm at this point willing to try anything for help.
Thanks!

user8612301 wrote:
Hi Srini
Srini,
To understand your above reply,
You say that
1) If they are based on 11i Discoverer EUL and Folders then export EUL And WorkBooks and Import them
into R12 Discoverer Environment..Refresh the EUL..So ORACLE will take care of the changes like 11i SOB vs R12 Ledegrs??Pl open a SR with Support on what to do with seeded EUL as part of this upgrade - I suspect you will need to import the R12 EUL as part of this upgrade.
>
2) If they are Custom SQL reports from 11i then just RECREATE them from SCRATCH..Correct - after you verify that they are changed to reflect the R12 data model
>
Am I right?
thanks
kp
Edited by: user8612301 on Apr 20, 2011 8:57 AMSrini

Migrating from 11i to R12 - setup reports and diagnostics

Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.

983173 wrote:
Hi,
we are looking at migrating(not upgrading) from 11i to R12 and looking for setup scripts and diagnostics which can tell what org structure has been followed in 11i. Is anybody aware of such scripts and/or diagnostic programs provided by Oracle. We also want to find out the the volume of data etc in various primary tables. Do we have some kind of report for this too ? Any help would be highly appreciated.Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Upgrade from 11i to R12 - Custom Forms,Reports and Workflows
Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
EBS Seed Data Comparison Reports Now Available
https://blogs.oracle.com/stevenChan/entry/ebs_seed_data_comparison_reports
eTRM
http://etrm.oracle.com
Thanks,
Hussein

Customizations when we upgrade from R11 to R12

what needs to be done with OA Framework jdeveloper customizations when we upgrade from R11 to R12.DO THEY NEED TO BE RECOMPILED USING THE NEW JDEVELOPER VERSION ????

what needs to be done with OA Framework jdeveloper customizations when we upgrade from R11 to R12.DO THEY NEED TO BE RECOMPILED USING THE NEW JDEVELOPER VERSION ????Please see these docs/links.
Upgrading Form Personalizations and OA Framework Personalizations from Oracle E-Business Suite Release 11i to 12.1 [ID 1292611.1]
New Whitepaper: Upgrading EBS 11i Forms + OA Framework Personalizations to EBS 12
http://blogs.oracle.com/stevenChan/entry/personalization_upgrades_whitepaper
Thanks,
Hussein

Hello - I upgraded from photoshop cc to cc 2014 and lost my plug ins. How can I move them into cc 2014? Thanks

Hello - I upgraded from photoshop cc to cc 2014 and lost my plug ins. How can I move them into cc 2014? Thanks

The install of 2014 doesn't move or copy anything from a previous version, with the exception of settings. You can go into your Photoshop CC installation folder, navigate to your plugins folder and then just copy all the plugins you've installed from that folder and into the Photoshop CC 2014 plugins folder. The plugins should then be available in 2014 the next time you launch Photoshop.
The only thing that may prevent this from working is if you're using the 32bit version of Photoshop CC. Photoshop CC 2014 is 64bit only so 32bit plugins don't work. If this is the case for you, check out the manufacturer of the plugins and see if they have 64bit versions available.

I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

http://support.apple.com/kb/TS2755

HT3228 I upgraded from iPhone 4 to a 5 and my emails have duplicated. Those I received and read on my Mac this morning have come in again and show unread so I have 2 of all of them. Any idea what setting is causing this?

I upgraded from iPhone 4 to a 5 and my emails have duplicated. Those I received and read on my Mac this morning have come in again and show unread so I have 2 of all of them. Any idea what setting is causing this? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics have pixelated (either white or black) patterns on them. But it turns out fine when i open up the affected files/folders/pics. And this phenomenon persists after updating software.

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics in my disk drive have 'dotted' (either white or black) patterns on them. But it turns out fine when I open up the affected files/folders/pics. And this phenomenon persisted even after updating to the latest software. I proceeded to upgrade to 10.8 and updated the latest software thinking that this might resolve the problem but still stays the same way as it was. Could it be the Adobe flash player that is causing this problem? Please help.

this posting shows how to migrate wiki. http://discussions.apple.com/thread.jspa?threadID=2205892
I did it and it worked.

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Exclamation mark appears instead of photo. Recently upgraded from i mac to Macbook air and all was transferred over. I have run all the repair and rebuild functions in iphoto. Any other solution?

Since iPLM failed to help try the following:
Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.
OT

Can I buy a Lightroom upgrade (from LR3) with a perpetual licence and a student discount? If so, which page do I need? Thanks.

I am trying to buy a Lightroom upgrade (from LR3) with a perpetual licence and with a student discount.
If I go the student discount route on the web U get taken to the 'cloud' options which I don't want.
Any help would be appreciated.
Thanks.
PS Is the upgrade worth it in any case??

I believe there are NO upgrades for Student and Teacher editions but you can see here: Products
If the price is the same as an ordinary upgrade you are probably better off buying that because it can be upgraded in the future.

Recently upgraded from 7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\ !!!

I recently upgraded from LV7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\. I tried to copy my DAQmx library over from LV7.1.1\vi.lib and did a mass compile of that directory but the compiled files have a bunch of screwed up connector sinks showing as "void".
Anyone have any suggestions how I can acheive a proper DAQmx library within LV2009? Does LV2009 not come with DAQmx support??!!??
Solved!
Go to Solution.

After you install LabVIEW (any version), you need to run the DAQmx installer to install support for it with LabVIEW. Even if you already had DAQmx installed, you still need to re-run the installer to install LabVIEW support.
Jarrod S.
National Instruments

Upgraded from 11 to R12 -- GL,AP and FA modules

Similar Messages

Maybe you are looking for