Upgraded iMac hard drive: forgot to transfer EMI foam to new drive

Hi all,
Last night I managed to rip out the 1TB hard drive from my time capsule which died some time ago from the notorious Apple power supply problem, and transferred it into my old Intel iMac whose 320GB drive had died. Machine is booting fine now, but I realised I forgot to rip off the small cube of EMI foam from the old drive and transfer it onto the new drive.
Can anyone tell me if this is likely to be a problem? What does this bit of foam do?? Should I pull it all apart once more to stick the tiny bit of foam onto the drive??

Try using WinClone.
(47166)

Similar Messages

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed.

I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
Anyway, any help is appreciated. Thanks.

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

Please help RE retrieval/transfer of imac hard drive to imac Part 2

Absolutely any assistance would be gratefully appreciated thank you. I am computer illiterate and I need assistance retrieving data from a imac hard drive (rest of computer isn't working) to a newer imac. Previously had received help from the forum and found out I needed an external casing (thank you again to all those that helped), but no shops near me sell them, sales person told me Sata HDD Docking (OTB) would be able to do a similar thing. I really suck with technology, so I humbly ask if any patient persons more intelligent than me could help me with some basic questions to help me retrieve/transfer data. Let me know if I need to give details. Any links to guides or tutorials welcome as well, but I tend to second guess myself and fail at basic terms often, there are probably 6 year olds with better computer skills and knowledge than me, so yeah, pity welcome, help even more so. Oh first question am I still suppose to use Migration Assistent or do I just turn on computer with old HD in dock connected?

Okay, I apologize for throwing you the following curveball - it appears the shop assistent I was talking to may not have been as knowledgeable as I had hoped, because I don't think my imac is compatible with USB 3.0? I tried putting it into the dock but nothing happened - it gave me four options, transfer from another Mac, transfer from a PC, transfer from a Time Machine (and something else) and forth option was not to transfer now.
I attempted to transfer from Mac and Time Machine options, but with both the loading dial spun for 10 mins with each with no change. So I decided to try and set up the computer anyway. The internet set up part came up but at the time I didn't know how to set it up, and now with retrospect I assume I have to set that up before I "register this computer" as no hard drive is showing onmy computer at the moment? Sorry for the sudden and strange switch in problems but now that I have set up the internet - could you or anyone else please tell me how I can register the computer details (or why the hard drive icon is not appearing assuming those things are connected - when I did fill those details out before it told me it couldn't send them now and would have to be done later?)
Sorry for being so clueless - any help appreciated.
I am looking up my imacs specs now to see if it actually can access this dock. (thank you once again)

What is the most efficient (in terms of cost) way to transfer 35 mm slides to my iMac hard drive?

What is the most cost efficient way to transfer 35mm slide images to my iMac hard drive?

This gives you the basics
http://www.tech-faq.com/how-to-copy-slides-to-disk.htm
The first option, the professional one, isn't the cheapest - but the results should be good.
The second option is very appealing. Some printers come with brackets that can be used to scan film or slides.
The third option is a slide scanner. I haven't used this option, but there's a significant startup cost of under $100.
In short, a scanner is the cheapest and most efficient option.

Can I upgrade my hard-drive in my iMac 7,1

Hello, I have the mid 2007 released intel based imac. I am about to change my 1GB memory to 4GB memory per the info I found on the Apple support site (upgrading memory on mid 2007 imacs or later). I also want to upgrade my hard-drive to 1TB as I need more storage and already using 2 1-TB externals for pics and other misc files that take up too much space. My husband says he doesnt think it can be done and I might as well suck it up and buy a new imac already with the specs I want. I am considering this but am so attached to my current imac (my first ever) that I would prefer to upgrade if possible before just jumping into a new one. My 2 questions are...
1) can my harddrive be upgraded to 1 or 2TB? If so, should I pay someone to do this, meaning is it difficult?
2) Does Apple do this and how much would this typically cost me? Do you think it is smarter to just trade this old one in for a new one?
Thanks,
Lani
2)

Yes, they are upgradable, and it isn't nearly as hard as the other posters will have you believe.
If you have the aptitude to do surgery on computers than yes this might be correct, however if you don't I think it would be difficult and not recommended.
Here is one site that shows how to do it, if you feel comfortable doing this type of work there you go. Oh one last thing if you have any AppleCare remaining this would certainly void it.

HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X.

Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?

Has Apple ever fixed the fan issue that results from upgrading the hard drives on 2009-2010 iMacs?
My CPU fan defaults to 3000RPM. I can rev the fan higher with 3rd party Fan controllers, but no lower than 3K.

OR you can short out the original temp sensor, to make the fans rev at quieter speeds.
You can also install an optical temp sensor in place of the old one, it will still read temps and adjust the fans accordingly, just not as good as an internal sensor.
Use something like this:http://www.ebay.com/itm/New-922-9229-Cable-Temp-Sensor-Optical-iMac-27-inch-Late -2009-2010-/111106349896
Another fan speed control app you may be interested in: http://exirion.net/ssdfanctrl/
Good Luck!

I upgraded my hard drive and my ipod no longer recognizes my computer. It will not sync. What should I do?

I upgraded my hard drive and my ipod no longer recognizes my computer. It will not sync. What should I do?

- First get iTunes to see the iPod:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- The transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For non-iTunes purchased music you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPOd to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.

Slow iMac and Time machine won't recognize iMac hard drive

I have an older iMac (2.16GHz Intel) that is upgraded to OSX10.6.7. Recently it has been running very slow (although it did not seem to correlate with any particular install that I know of). I have looked at the Activity Monitor and cannot find anything that is consuming vast amounts of memory (although I can't say that I really know what I'm looking for exactly, just no high numbers). I did a Safe Boot and it is still really slow there (EXAMPLE of slow is taking several minutes to open a program or taking 27 hours to download my pictures (which only took 13 minutes on my MacBook)). I know my iMac could use more memory (1G), but the slow problem is there even if only running one program. I can't find a particular pattern to it, it just hangs up and then comes back most of the time. It did however start shutting itself down recently. I finally got into disk utility (I've been trying to run disk utility and it usually goes into an eternal spin that I can't even force quit - have to hard boot). So from disk utility I ran verify disk in first aid - it says "the volume Macintosh HD appears to be ok." I"m not sure what else I'm supposed to do in here either. So my first question is Does anyone have any other suggestions for the slowness? Second, in the meantime I'm desperately trying to back up my data on the time machine that I stupidly have never set up as a back up. I can manually put files one at a time over there, but if I try to use it as a time capsule (system preferences, time capsule on) my hard drive does not show up as one of the options???? My external drive and the data that is already on the time capsule show up, but not my iMac hard drive. So my second question is How do I get my time machine to see my hard drive or is there another way to get my files to move over there? I realize I'm in trouble, any help would be greatly appreciated. I've tried to provide as much info as possible. Maybe there is something obvious I'm missing.

My own response, or rather an update: I took the computer up to the Genius Bar - my hard drive is bad. They are going to try to rescue my data. For those of you reading this with a similar problem, make an appointment and go to the Apple Store if you can. Mike, my personal "genius" for this encounter, said that stressing the machine when the hard drive is going bad just risks damaging it more. If you potentially have a hardware issue, take it and let them determine what is wrong. They have tools and diagnostics most of us wouldn't know how to use if we read about them here - and they have ways of retrieving data (I hope) that most of us do not have. Please note that disk utility said my hard drive was ok, but the diagnostics they did showed that in fact my hard drive was much less than ok, but it was still "mounting" hence the disk utility reporting it was ok. It is over an hour drive for me to get to the Apple store, and I only wish I had gone sooner.

I need to replace my late 2006 20" imac hard drive

here's what i have
VIN,IMAC (20-INCH LATE 2006)
running leopard 10.5.8
Hardware Overview:
Model Name: iMac
Model Identifier:    iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed:    667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version (system): 1.9f4
Serial Number (system): W8******VUV
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model:    WDC WD2500JS-40TGB0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
Volumes: Macintosh HD:
Capacity: 232.57 GB
Available: 106.04 GB
Writable: Yes
File System: Journaled HFS+
BSD Name:    disk0s2
disk utility shows this:
my mac is still running like a champ but as the pictures above show it's time
i've found a lot of people with the same question i have on this site with answers but most links that people suggest are broken or 2 of the hard drives they've recommended are discontiued
i've got a frys electronics and best buy near by or internet if that's the best way to go about it
what exactly do i need to look for when i'm at a store or online?
what size hard drive, any? 250GB, 500GB, 750GB, 1TB
3.5" SATA
7200RPM
does cache matter?
anything else?
people's responses to: Need to replace my late 2006 imac hard drive - what should i be looking for to replace it?
1. You can use any 3.5" Sata drive, WD or Seagate would be good choices.
2. Do not use "green" drives like the WD Blue series. WD Black are fine as are Seagates.
3. The 2T green will work fine in the Intel iMac's. I always suggest using the quieter and cooler running Blue's or Green's in the iMac's.
4. Personally I have upgraded the Hard Drive in several Early Core Duo's using both 320GB and 500GB WD Cavair Blue's.
5. WD Caviar Blue or WD Caviar Green, they run cooler and quieter than the WD Black or Seagate's.
6. I'm very happy with the WD Caviar Blue that replaced my factory installed 160GB Seagate HD a few months ago.
i've found some good DIY tutorials for install
http://www.youtube.com/watch?v=ShY8zuT-wPg&feature=player_embedded
http://www.ifixit.com/Guide/iMac+Intel+20-Inch+EMC+2105+and+2118+Hard+Drive+Repl acement/1092/1
any help will be appreciated,
sean k
<Edited by Host>

thanks for the quick reply kappy,
i plan to purchase a new imac when they are actually shipped, in stores, and i know all my handicap assisted devises will work on it
you say "Do not buy a drive designed for SATA 3 6 Gb/s interfaces as some may not work on the controller in your iMac"
at frys it breaks the groups like this:
Interface (32)
SATA/300 (17)
SATA/600 (9)
PATA/100 (6)
could you take a look at this link to frys and recommend a hard drive
http://www.frys.com/search?cat=-69564&pType=pDisplay&fq=100413%203.5-100415%2072 00
or bestbuy internal hard drives
like you said it's got a limited life and just need something to get by till the new imacs arrive

Upgrade my hard drive

I have a Macbook that I need to upgrade my hard drive to the maximun size and speed possible. Is it something that I can do or only Apple? And if so, how difficult is it.

Putting in a new hard drive is easy. For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here are video instructions on replacing the hard drive on the Aluminum Unibody http://eshop.macsales.com/installvideos/macbookpro_13_unibody_hd/
Here are video instructions on replacing the hard drive on the White Unibody http://eshop.macsales.com/installvideos/macbook_13_09_unibody_hd/
To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then partition and format the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon. http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=sr_1_1?ie=UTF8&qid=1332118549&sr=8-1
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

IMac hard drive failing; external TM will restore but won't then back up

It appears my early 2009 (OS X 10.9.5) hard drive is failing as it crashed 6 months ago, in November and again this week. SMART Utility says it has re-allocated 6 bad sectors and there has been 1 re-allocated event. Each Time I have successfully restored from an external hard drive with TM on it. Prior to the November fail, CCC reported an odd (unknown to me system file) corrupt file but, instead of replacing the file as perhaps I should, I decided to re-boot which it wouldn't do and hence the November TM restore.
However, despite restoring successfully the external TM will no longer make back ups. I have tried repairing it but it is greyed out and Verify says 'unable to complete.' Eventually I did get the greyed out button to work but Repair reported:
Verifying volume “Time Machine”
Checking file system
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Keys out of order
Invalid extent entry
Incorrect block count for file iNode785919y8
(It should be 13 instead of 4194317)Invalid extent entry
Missing thread record (id = 82)
Incorrect size for file iNode78591999
(It should be 4096 instead of 274877907467)
Invalid extent entry
File record has hard link chain flag (id = 78591999)
File has incorrect number of links (id = 78591999)
(It should be 1 instead of 17)
Missing thread record (id = 18)
Invalid extent entry
Invalid extent entry
Invalid extent entry
Incorrect block count for file iNo$e78592002
(It should be 4194317 instead of 13)
Missing thread record (id = 82)
Invalid extent entry
Incorrect size for file iN/de7x592003
(It should be 4096 instead of 274877907467)
Invalid extent entry
File record has hard link chain flag (id = 78592067)
File has incorrect number of links (id = 78592067)
(It should be 1 instead of 17)
Missing thread record (id = 4194322)
Invalid extent entry
Invalid extent entry
File record has hard link chain flag (id = 78592004)
File has incorrect number of links (id = 78592004)
(It should be 1 instead of 17)
Missing thread record (id = 18)
Incorrect size for file iNode78592005
(It should be 0 instead of 64)I
nvalid extent entry
Invalid extent entryIncorrect size for file iNode78592006
(It should be 0 instead of 4194304)
Invalid extent entry
Invalid extent entry
Missing thread record (id = 4194322)
Invalid extent entry
Invalid extent entry
File record has hard link chain flag (id = 82786312)
File has incorrect number of links (id = 82786312)
(It should be 1 instead of 17)
Missing thread record (id = 18)
Incorrect block count for file )Nod%78592009
(It should be 65 instead of 1)
Invalid extent entry
Invalid extent entry
Incorrect block count for file iNode78592010
(It should be 0 instead of 4194304)
Invalid extent entry
Incorrect size for file iNode78592011
(It should be 0 instead of 274877906944)
Invalid catalog record type
The volume Time Machine could not be verified completely.
Error: This disk needs to be repaired. Click Repair Disk.
Whilst pondering this, the hard drive crashed again this week. Bizarrely I was able to restore from the very same external TM that will not let me do further back ups nor be repaired.
I wonder if there are any further checks I can do to establish if my iMac hard drive is failing? I will then decide whether to replace the hard drive - I see I can fit a WD 6TB with the jumpers set to reduce the speed to 3GB/s - or buy a new iMac.
I wonder also whether there is anything I can do to preserve my TM back ups. I realise I am being guided to re-format this external drive, but can I do that and then add back the actual existing back ups (which I would transfer to another disk before re-formatting) rather than start again from no history newly formatted?

Omdineen wrote:
It boots up to where its just my background and the Finder bar but then crashes, so I can't click anything. Anything from here or am I just screwed?
There are a few remaining options.
If you have another Mac with a FireWire port, try FireWire Target Disk Mode: http://support.apple.com/kb/HT1661
You need a FireWire cable to connect the two Macs. This will allow you to mount your failing HD on a working Mac and copy files that way.
Try Safe Mode - read about it first:
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components.
Starting up in Safe Mode
This assumes the Finder is crashing due to a third party system extension or optional system component that Safe Mode will prevent from loading. You should still be able to copy files directly to an external device, but file sharing will be disabled.
Lastly boot from the DVD again, repair the disk again, reinstall OS X, and keep your fingers crossed. You're squeezing the last drops of life from the thing.

Upgraded iMac hard drive: forgot to transfer EMI foam to new drive

Similar Messages

Maybe you are looking for