Upgraded iMac-Printers not being recognized

I just upgraded from a 20 in iMac to a 27in- Mac OS X Version 10.6.7 & had all my data transferred at Apple store. My printers were not recognizing this computer, so inadvertently deleted them all. I am trying to re-install my HP Photosmart D7360, but nothing is happening. I have opened Printers in System Preferences,and clicked Add + to set up printer, but nothing shows up under Printer Name. I'm sure it's something simple. .... PLS Help.

You have to tell us how the printer is connected to the computer, USB, Wi-fi, ethernet, etc...
It could be as simply as plugging in via USB then click Print & Fax Preference, if the printer isn't seen in the left window click the + sign in the bottom of the window, then following the prompts.

Similar Messages

Upgraded hard drive not being recognized

I've upgraded the hard drive in my new Unibody 15" macbook pro to a 7200 rpm Hitatchi Travelstar 7k320 from the original 5400 rpm drive. When I boot from the installer CD, one of the following occurs:
•I am able to open disk utility, see the drive, and reformat/re-partition it. However, the installer fails to copy files to the drive and stops after about 1%.
•Disk Utility fails to erase/re-partition the drive, and the installer unmounts the disk
•Disk Utility does not list the drive as an option at all.
Does anyone have a possible solution? Applecare wouldn't help me out being that the drive is third-party.

Prep the new drive as follows:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

External LaCie HD not being recognized after 10.5.6 upgrade?

My LaCie HD used for Super Duper backup is not being recognized by OSX. I also use a WD HD for Time Machine backup.
Before I upgraded to 10.5.6 i repaired permissions and backedup to the LaCie. Now when I turn on the drive, OSX does not see the drive.
I now see an icon in Super Duper in both the Source and Target areas called disk image. I have never seen this before. I do not see anything on my imac HD called disk image.
Any ideas?

Just to let everybody know that P-RAM reset resolved this problem.

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?

My external HD of 1TB is not being recognized by the iMac and when after a long waiting period it does, the whole computer becomes extremely slow. Do I need any particular add-on to make it workable?
Before I updated to OS X Mavericks I was using another external disk that was getting disconnected ocasionally so I bought a new ADATA HD710 portable 1TB Drive and moved the files to it. This new drive which is supposed to be OS X Mavericks compatible takes minutes to show the files especially when opening second and third level folders which has made mu iMac unusable
What should I do?

Your Mac should be able to recognize many different types of drives (including Windows-formatted drives) immediately for Reading, provided they are in good working condition and not damaged. There should be no need to transfer to a different type of drive.
If there is no recognition of this drive, see if it can be seen in Disk Utility.
If your aim is to transfer the data on it DO NOT use ERASE or PARTITION as these will completely erase all the information on the Drive.
If the drive is present while the Mac sleeps, it is likely to drop out and not be seen any longer, especially if it is a USB-powered drive.

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help?

My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?

Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

My iPad is not being recognized by the computer, therefore, cannot sync. It charges when plugged to the wall, but not when pugged to iMac.

Most common culprits include the cable. Try swapping it out for a different one.. or not having the most recent version of itunes. I once even solved this problem by shutting down the computer for 2 minutes. (the longer the better), with the ipad plugged in. starting it up... then itunes recognizes it, launches, and syncs.
Apple has a troubleshooting assistant on this topic:
http://www.apple.com/support/ipad/assistant/itunes/
It will advise you to reboot. I recommend shutting down instead.
--Sam
P.S The ipad should charge when asleep and plugged into your Mac. The charging behavior is normal. There isn't enough power out the USB ports to charge the ipad while it is on on some older Macs and nearly all PCs.

Registrations for certain software are not being recognized by my Imac.

Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8
Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store.
This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
Thanks for any help.
Michael

I can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
MT

I have just upgraded my itunes to 11.1 and now my iphone is not being recognized

Hello, I have itunes 11.1 installed on my PC, with windows 8, just upgraded today and now my iphone is not being recognized. Am I doing anything wrong? What can be done? I've seen that lots of people have the same issue using a MAC computer but I am using a laptop PC with Windows 8.... please help!!! Thanks...

most likely you will have to reinstall itunes but try the step before in the article http://support.apple.com/kb/ts1538

Entourage 2008 not being recognized as installed after migration to new iMac Mountain Lion.

Hello Everyone!
I;ve been browsing for answers to my problems for 2 days now. Office 2008 is not being recognized as installed on my machine. i have 2011 but i prefer Entourage as my defailt email client.
What happens: when i try to access Entourage i get a getting started window asking me to either register my product or learn more. when i try installing the update 12.3.6 for Office 2008 it tells me it cannot be installed because the software componenet necessary for installation is not found on the disc. from this I gather the actual Office is not being recognized as installed.
What I tried so far: I did all that was suggested on forums, such as checking to see if the MS office 2008 is in Applications, nothing was changed like the name of software or location of any of its components, tried getting the latest updates for the MS office 2008, tried installing on another user, none of these worked.
I am still to try reinstalling but the disc i have is an upgrade from 2004 which will prob not work in this case, since anyway I understand that .dmg is not supported anymore.
What can I do? anything that doesn't require me to use 2011, i do not like the Outlook in 2011. is there a way to activate my install of 2008 and use that? i really like Entourage, Outlook doesn't satisfy me.
please help

Reference your first post - I download and use dmg files, so either I'm lucky or they are supported.
I would try the disk reinstall since at this point there doesn't seem to be many options.
Do you have a backup? You could restore the Microsoft Office 2008 folder.

Scanner is not being recognized since I upgraded to OS X 10.9

My scanner on my Konica Minolta Magicolor 1690MF is not being recognized via image capture since I upgraded to OS X 10.9 - anyone have a fix for that? If I knew this was going to be the case I would never have upgraded!

Follow the directions in this Apple Advice Letter:
http://support.apple.com/kb/PH11143
and see if that works. If not then please be as descriptive as you can when posting your issue. If you are getting error messages it may be helpful to note what they say or even better take a screen shot and incorporate into your post.

21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

21"imac 45 days old - 2tb drive has started not being recognized; receiving a "drive not disconnected properly", though the drive was never disconnected

That sounds like a hardware problem.
Backup your data and contact Apple Support or your local AASP to make a service appointment.
Apple - Support - Contact Apple Support
Apple - Find Locations

IPhone not being recognized by iTunes

My iPhone is not being recognized by iTunes. I have iPhone original version with the latest software OS update. The phone was reset because of unrelated problems, and I need to connect to iTunes for it be operational! iTunes 9.1 on my computer... my iPad syncs with no problem but the iPhone is not even showing up as a device on the iMac or MacBook!
I have followed the steps on the Apple Support website, but the problem persists. What to do next?
thanks

Your computer detail provided indicates you have a Mac and the link you provided is for Windows - at least for the software conflicts portion the link went directly to, although some of the troubleshooting steps are similar.
Here is the link for OS X.
http://support.apple.com/kb/TS2050

10.7 update and now my iphones/ipod is not being recognized.

10.7 update and now my iphones/ipod is not being recognized in windows 7 service pack 1. I have 2 iphones and an ipod 3G. I have to go into services and stop the apple mobile device and start it up again to get my devices recognized. Anyone else having the same issue? One of the iphones is not upgraded to the new iOS, the other phone and the ipod are updated.

Hi,
You probably need to update to Snow Leopard10.6.8
Click Apple icon top left and click Software Update and keep doing that until it says software is up to date.
That should bring your itunes to the correct version.
Hope this helps,
Alan

Canon G9 not being recognized by MacBook Pro

I'm having some issues with a Canon G9 not being recognized by the particular MacBook i have to use. When i connect the G9 via USB (obviously with a good cable and camera switched on) neither Image Capture nor iPhoto recognize it. I have tried connecting the camera to a bunch of other macs (Powerbooks, latest MacBook, same model of Macbook and system as the one I'm using), they all didn't have any trouble recognizing the camera. My MaProxy-Connection: keep-alive
Cache-Control: max-age=0
ook can see any other camera I have tried without trouble... I'm using 10.5.6...
The System Profiler does actually see something being connected via USB, but it only shows up as "Composite-Device/0x04a9(Canon Inc.)".
Any ideas what might cause the issue?
Message was edited

Updated information ... these card do get read on an older iMac, circa 2010 or so, also running 10.8.4. For some reason, they're not being read by the internal SD reader on the macbook pro. Odd.

Upgraded iMac-Printers not being recognized

Similar Messages

Maybe you are looking for