Upgraded iMac to 10.8.5 but no longer detects any WiFi networks!
I have a 2009 27" iMac and a 24" 2007 iMac with 2 Airport Extreme routers (2013 The latest.
Everything was working perfectly till I upgraded to 10.8.5.
I lost my internet and both routers. Could not use the Internet and Wi-Fi on my iPhone 5.
Reverted to a backup with 10.8.4 and everything is working perfectly as it did before the upgrade.
Does this mean that I will not be able to upgrade to 10.8.5 or 10.9 ???
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Similar Messages
-
Upgraded MacBook Pro to 10.8.5 but no longer detects any WiFi networks!
Was working just fine prior to today's upgrade from 10.8.4 to OS X 10.8.5 (12F37) - Serial W8*******71C
Wi-Fi: Looking for networks... does not look up any availanble networks home or usual suspects around me.
Software Versions:
CoreWLAN: 3.4 (340.18)
CoreWLANKit: 2.0.2 (202.11)
Menu Extra: 8.1 (810.11)
configd plug-in: 8.5 (850.252)
System Information: 8.3 (830.5)
IO80211 Family: 5.3 (530.5)
Diagnostics: 2.1 (210.25)
AirPort Utility: 6.3.1 (631.4)
Interfaces:
en1:
Card Type: AirPort Extreme (0x14E4, 0x8D)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.100.17)
MAC Address: xxx
Locale: FCC
Country Code: X0
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
AirDrop: Supported
Status: Off
<Edited by Host>Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi Everyone. My MBP 7,1 didn't have any wifi issues not until 2 weeks ago. The laptop's battery got empty and when I tried to turned it on, the computer just froze. So I tried to reset it. However, I noticed that the wifi or airport can no longer detect any wifi signal. There were instances that it wouldn't turn on when I shut it off but now, it seems okey. I tried the zapping of PRAM and deleting all the things needed as I saw in different threads but it still not working. The ethernet works fine but I still need the wifi. Its been 2 weeks already. I don't have an Apple Store near me coz I am in southern part of Philippines. Can someone shed light on this? Thank you so much.
Hi!! To add more to the issue, the other day, my airport card is nowhere to be found. It now says no airport card installed which is really crazy. I also noticed that my MBP freezes during start up and I had to zap the PRAM so it would open up. Anyone there who experienced the same thing? I'd really appreciate your suggestions. Thanks!
-
My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.
One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having -
IPad connects to free WiFi Hotspots, but NOT on my home WiFi network
First, let me say that I have my iMac and a PC laptop working on my home WiFi network with no problems. My iPad connected to my home WiFi network for several months until about a week ago or so, somewhere around the time that I updated my iPad to OS 4.3.3.
In the General settings section I have reset the NETWORK setting several times to no avail. I changed my network SSID twice, and changed my WAP2 password 3 times. My iMac and PC laptop worked like a charm for each change. But, like I said, my iPad has no issues connecting to free WiFi hotspots like at coffee shops, but "cannot join my Clearwire WiFi network" at home.
My guess is that I have an OS issue, but if anybody knows anything better, please let me know.
Thank you.I think the OS issue is with the password because free WiFi hotspots don't require passwords. So, all of my RF circuits are fine. My password is correct because when I changed it in the Clearwire WiMax modem\router, I was able to connect with the new password on my iMac and PC laptop with no problems.
I have a 3 month old Clearwire 4G modem\router. My iPad worked great from the day I installed it. It stopped working around the time that I updated my iPad OS to 4.3.3.
I am hoping that there is an OS fix because I had Clearwire on the phone for over an hour and we re-booted the modem\router several times and reset it to its default values. Again, I have no problems connecting with my iMac or PC laptop. They work like a charm, just like my iPad used to. -
Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?
I sometimes experience the same issue. But not only in 6.1 but also in previous versions
-
Imac failing to see any wifi network
I have an Imac which is just over 6 months old (purchased December 2011) running LION, it has been connected to our wifi network since we set it up and there have been no problems, the mac has also been able to see other wifi nextworks available in our area.
A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all.
I have rebooted the machine and the router etc to no avail and all other Macs, phones and ipdas etc are able to see and use the wifi network successfully?
Has anyone had this problem? is there anything more I can do before I box it up and take it into the Mac Store to see an expert?
I assume its a hardware failure?
PS I have connected the mac with an ethernet cable and that works fine, its just not able to see any wifi networks.
Regards
DaveHi!
I bought my imac 21,5 before 2 months after all lies from people dont understanding computers.
Yes, I have exact same problem. I am using safari then suddenly the wifi is off. And it scans for wifi networks but it cant find any networks. I am using my old pc now and writing this post. If I restart the imac the wifi gets normal and i can see my network and other networks.
I have applecare too, 3 years. But i dont know what to do. If you ask apple they will told you "the problem is unusual, or they will told you its not usual that people get problem with mac. If you ask mac users, they will told you "you never get problem with mac" BUT THEY ALL LYING!
(i have other problems too with my imac. sometimes when the screen enter sleep mode I cant turn it on with the magic mouse or keyboard. I can only turn it on with screen-powerbutton then after maybe 10 sec the login-screen turns black. then I start the screen again with screen-powerbutton the screen turns black again.etc.)
Of course it is hardware issue (I am expert user of pc) but the problem is Apple dont want to belive that a mac can get problem. And people using mac are afraid of the word virus or computer problem therefore they buy from Apple. -
IMAC can not see any wifi networks at all?
IMAC can not find any wifi network at all. A few days ago the Imac suddenly had no wifi and on turning the WIFI on and off it became apparent that when it scans for wifi it can see no wifi networks at all. I have several other computers and they all see the wifi networks fine. I assume it is a hardware issue but the hardware test I preformed comes up with no errors. Anyone got any ideas?
Hello Sage10,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Best of luck,
Mario -
why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network
I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
make sure you are close to the wifi signal away from any other wifi devices. -
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network? -
After upgrading iOS 7 on my iPhone 5, the wifi is not working . It cannot detect any wifi nor am I able to enable wifi under settings. Is there a way for me to fix this?
Hi samer almasri,
If you are having issues with enabling Wifi on your iPhone you may want to try a couple of things to troubleshoot. First of all I would quit all open applications on the phone and try again. See this previous thread for how -
How do I close apps on my iPhone with iOS 7?
https://discussions.apple.com/thread/5581063
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
Thanks for using Apple Support Communities.
Best,
Brett L -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
My ipod touch will not detect any wifi signals but others devices such as my laptops; do connect without a problem. I restored my ipod and updated it and still no wifi signals are being detected.
Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again. After that it shou,d save your device
-
My imac has suddenly stopped connecting to the internet through my wifi network if I restart the machine it finds the network for a minute or 2 and then stops working and cant find any wifi networks, other devices are connecting with no problems. Any suggestions please
Try posting in the iMac forum. This is the iPod touch forum.
Maybe you are looking for
-
How can I disable a method from a direved class
I am extended TreeSet for an assigment with some new functionality. This new class is rbTree. I need to disable all of the old functions so that if a user creates a new rbTree he will only be able to use the methods defined in rbTree. rbTree uses som
-
Transaction rolled back......soa 11g
I have a bpel process 1 which calls bpel process 2. Bpel process 2 is a file write. In my instance bpel process 2 is called and the file is written successfully. but bpel process 1 gets errored out with no errors being displayed. The bpel process 1 h
-
SWF file opens in safari / firefox but not IE
Hi. I was wondering if someone could help me. I'm working on a flash project that people can download from the internet and use or just use on the internet. I'm have a problem with one of the links however. Its a button that is to link to a excel
-
Hi, I have a question regarding FCP 6, Xsan/Xserver & project sharing. Is it possible? I've read some things that say people used to be able to with FCP 5 but not 6. Permissions issue and all that. I come from several years of working on avid and sha
-
Perfomance Research CF MX7 and SQL
I have been doing some testing with CF MX7, IIS and Microsoft SQL Express. Everything is on my development Win XP PRO computer. 2G RAM installed and 3Ghz Pentium CPU. The testing was done against a 160,000 record table. I used the following query for