Upgraded iPad 3 to IOS 7 how to make wallpaper photo fit properly?

Since upgrading my wallpaper photo is enlarged, cutting off most of the photo. How do I resize to fit properly? Thank you.

It's not a perfect fix, but try going into your photos app, selecting your photo and using the 'send' icon to send it to be wallpaper (the little square with an arrow poking out of it).
You'll have a bit more control than you do via the settings app, but not as much as you used to. Also, the higher resolution the image is to begin with the better your results may be.

Similar Messages

  • Upgraded iPad 2 to iOS 7 Keyboard lags make it impossible to type. Advise?

    I upgraded my iPad 2 to iOS 7.  After the upgrade all typing function have a lag so severe that it makes the iPad unusable.  Each letter typed takes about 10-15 seconds to appear.  Typing words or sentences is not practical at all.  Even passwords are laborious to type.
    I doubt this is what Apple had in mind when they said the iPad 2 could use iOS 7.  Are there any solutions for going back to iOS 6?  Anything I can do to repair the current situation?
    My 64 gig iPad 2 is nothing better than a paper weight.  I would appreciate any advise

    I just did a complete restore to factory settings followed by a restore from my iTunes backup.  Performance was dramatically improved.  I can now type normally whereas before I was waiting for each letter to appear with a 10-15 second delay.  While I can't tell you why this worked, it is worth a try.

  • How to make a photo "fit" with the surrounding film clips?

    I am working on a new project in which I have a photo which is "taller" than the other film clips, so consequently, when that clip is playing, one cannot see the top or the bottom because they have been cropped off to match the height of the other film clips.
    What can I do to make that picture "fit"? It is important because this is a photo of a person, not just landscape.
    -L
    Message was edited by: Lorna from Hawaii

    I clicked a button that said Ken Burns!!! I figured it out.
    -L

  • How can I make a photo fit my iPhone 6 as wallpaper?

    I have an iPhone 6, and would like to set a photo as wallpaper, but no matter how I crop and try to resize it, it does not fit and an edge is cut off. 
    Any tips on how to make a photo fit?  I did not have this problem with my previous iPhone 4s.

    The easiest way is to select the photo you want to use.  Then edit it (crop, enlarge, move left/right/up/down) then when you are happy with it - take a screen shot (tap sleep/wake button at same time tapping Home button).  Use this saved image as your wallpaper.

  • After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    After upgrading iPad 2 to iOS 7 , cannot open new tabs in safari . When pushing on " " , Safari close the application .

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • When we can upgrade ipad mini to ios 7 ?

    when we can upgrade ipad mini to ios 7 ?

    The general public will be able to sometime this fall. Apple employees and registered developers can now.
    (84223)

  • Is there a way to upgrade IPad 1 to iOS 6?

    My iPad 1 running on iOS 5.1.1. My applications are frequently crashing. Is there a way to upgrade IPad 1 to iOS 6?

    None of us are going to argue with you, but hardware changes, and more rapidly these days. The original iPhone doesn't run very much at all, and of course it can't even run 3G. But some people are happy with it. Non-Intel Macs can't run the latest OSX.
    Apple needs to be competitive by making the fastest and most modern tablet it can, and that means within 3 or so years what I have now could be antiquated. That also means Apple has to make a decision about whether to try to force the operating system to continue to be backwards compatible which may have speed issues, for example, for those who have current hardware.
    iOS 5.1.1 is very advanced. It's only really missing a few things from iOS 6.1, some of which a LOT of people don't like. Maps is one. The loss of Google Maps is another.
    There is nothing you can do. Most Apps don't let you update if it is incompatible with your current iOS, so you should be all right.

  • HT1766 Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

    Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

    Upgraded iPad 2 w/IOS 7. Battery drains to 0% even with iPad in sleep mode.  Called Apple-they had me clear it.  Battery charge held that night.  Restored from iCloud. Charge not holding again.  Any similar events?  What to do?

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

  • How to make a photo STAY in the assets panel for future use for In browser editing?

    How to make a photo STAY in the assets panel for future use for In browser editing?
    When I delete a photo from a page, it does not stay in the assets panel. My client uses in browser editing daily. Once a week he changes a photo just for a day, then needs the previous photo to replace it. The original photo is not in the asset panel (or folder) for him to choose.
    When you upload a photo, it has an arrow in the asset panel. How do you use this as an asset?

    Sure ... right mouse click on  your page and choose 'Exclude Page from Menus' :-)

  • How to make a picture fit an entire page in a pages

    how to make a picture fit an entire page in a pages

    Hello belluchis,
    Thanks for using Apple Support Communities.
    After inserting your image into your Pages document, follow the instructions in the Pages help section below to learn how to manipulate the object:
    Resize, rotate, and flip an object - Pages Help for Mac
    http://help.apple.com/pages/mac/5.2/#/tan114930688
    Take care,
    Alex H.

  • JavaFX 2.0 : How to make a stage fit into browser view area?

    Invoking a JavaFX 2.0 applet from browser results in white spaces on the right and bottom area of the browser. This happens when the JavaFX stage resolutions is lesser than that of browsing desktop resolution. In a client/server model, usually server components doesn't know about the client resolutions. So how to make a stage fit into browser view area?
    Also I think, setting the primary stage to full screen mode is not what I want to achieve, as this mode overlays the browser window.

    Try typing 100% into the width and height fields. Alternatively, you could use Javascript (no connection to Java in spite of the name) to create an event to resize the applet to the window's size.

  • How to make a photo small so I can send it by e-mail

    want to know how it make a photo small on my desktop so I
    can send it by e-mail, thank you

    I suppose there might be an extension, but you would be better off using a free photo editor.
    I use "IrfanView" (irfanview.com) to work with photographs.
    I use "PicPick" (picpick.org) to work from a screen print ("PrtSc") or capture to crop and annotate.
    *Also see http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows
    *also see http://en.wikipedia.org/wiki/Screenshot
    Something simpler may or may not be:
    :Picnik (picnik.com), online photo editing, fix photos, crop, resize, rotate, artsy effects, fonts, shapes.
    You also have alternatives storing the picture and./or elsewhere and providing a link
    * imageshack.com
    * dropbox.com
    If you have access to the image through Firefox, this extension looks promising
    *ResizR :: Add-ons for Firefox (10 KB)<br>https://addons.mozilla.org/firefox/addon/resizr/
    Saving files to your desktop is not the best place.

  • How to make a photo half black and white with select colours

    Hey,
    Can anyone give me step by step instructions on how to make a photo black and white with abit of colour like the one attached... on CS4?
    Cheers

    Haven't seen you attached file as it takes a long time for attachments to load on this forum.  Try little camera icon instead.
    EASIEST way to have B&W in areas is to add Hue and Saturation adjustment layer.  Use sliders to make B&W.  Next paint on layer MASK, with black, to restore color in areas you want to show color.

  • How to upgrade Ipad 1 to iOS 5.1.1

    When trying to upgrade apps, get message to upgrade to iOS 5.1.1
    How do I do that

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    You can no longer update to iOS 6.x, or down grade the iOS.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
    After canceling the dialog box, iTunes should automatically sync with your iPad.
    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
    From the iPad screen, click on the Update button.
    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

Maybe you are looking for

  • Extracting a Photo and Printing through ABAP Report

    Hi, How to extract a picture of an employee from PA30 or PA20. After extracting the picture how to print it in ABAP report. Waiting for help. Thanks in Advance with Regards.   MAM

  • OIF 10g not working with Artifact mode

    Hi all, I am working on OIF 10g requirement. I am using IDP initiated SSO and successfully implemented SSO using POST profile and I am running into issues with ARTIFACT profile. The only change I made for POST and ARTIFACT is : Login to OIF IDP admin

  • Having active file links to text files in pdf

    Hi, I have a Word doc that has a number of embedded text files that are accessible by double-clicking the text icon. When I convert the Word doc to pdf these will not launch Notepad with the actual text file that is needed. Any suggestions on how to

  • AC3 Codec - for QT and Toast

    Hola, My Toast DVD's made from avi's have no sound. Avi files played in QT have no sound. I assume it's related? Do I need the AC3 codec? Where do I get it, where do I put it? Gracias.

  • Changing the material Group in PO -- the GL assignment doesn't change

    Good morning, we have a material group linked to a valuation class. When we create a service purchase order, we use this material group and the G/L account is automatically updated, but if we change the material group, the G/L account doesn' change.