Upgraded iTunes no longer "sees" my airport express and will not network

Since upgrading to iTunes 8.2, iTunes no longer recognizes or sees my airport express (there is no longer an option box on the lower right area of the iTunes info so I can select computer speaker or additional speakers. The iTunes help says it should recognize the network when it starts, but it doesn't. My Airport is working properly. Sure would like to get those living room speakers back in the game!

I updated Airport Utility to 5.4.2 and even though it ended up telling me I hadn't changed my settings on the AE I use to play iTunes on my stereo, after the update of my Base and Express, the Multiple Speakers box appeared again on iTunes the next time I opened the iTunes window. Also, AU managed to, for the very first time, give me a solid green light on the AE, after a year + of blinking orange. So my advice is to update your Airport Utility and run it.

Similar Messages

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

I have a MacPro with OSX 10.9.4 and I photo 9.5. When opening IPhoto I got a message I needed to upgrade my IPhoto with an upgrade installer. Now IPhoto is just spinning and will not let me quit or Upgrade.

BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN

Hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

hello every one, am having issue with my itunes, for some reason or another my icon in the itunes doesnt change, its stuck on Songs, and will not let me get playlist or anything else. can any one tell me if that can be fixed

http://support.apple.com/kb/TS3694#error-1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

Airport Express and Airtunes not working

Hi all. I have a Digital Audio G4. I've been able to use my G4 with iTunes and my Airport Express for quite a while. All of sudden iTunes no longer sees it. The Airport Admin Utility doesn't see it either. But I can still connect to the internet with it. What makes this even weirder is, I also have a MacBook Pro. The MacBook Pro has no problem seeing the Airport Express in the Airport Admin Utility and in iTunes.
Any Help you can give is much appreciated.

I can't offer any help. I am having the same problem except I have an Airport Extreme with the Airport Express acting as an extender. The only thing that works for me is unplugging the Airport Express and plugging it back in. Sometimes it is fine the entire day. Other times I have to do this multiple times throughout the day. I don't think this is a good, long-term solution. Any help anyone?

HT4587 my itunes no longer connects to airport express. I get unknown error -15000

I have been using airplay for months, then out of the blue my itunes no longer connects to the AE. I can connect and stream music directly from an iphone or touch but not from my laptop. Please help

Well I uninstalled Comodo and turned on Windows firewall. I re-installed iTunes.
I went into firewall settings and iTunes was checked off (allowed) for both home & public networks. Didn't work. I saw Bonjour on there and just 'home' was checked off, so I checked off 'public' to see if it mattered.
It did work. iTunes connected to the remote speakers....but for some reason, only for a very short period, then I get a network error.
This is freaking unbelievable. It was all working fine till I stupidly updtated to 10. Grrrrrrrrr

Airport Express that will not reset, nor can it be controlled by s/w

I have tried to switch an older (white) airport with a new Airport Express. At first it did work, then nothing. Software either the appls/util/airport set-up or configure utilities can't connect or find the Airport Express. It will show up as a gray set of bars but doesn't name my network. The only way to configure this requires going to the utilities which of course cannot find the signal. I'm going crazy I want to network iTunes and my printers with my airport equiped imac, iBook, PowerBook G4, and the new MacBook Pro. I'm spending hours going over this, nothing changes but my level of frustration.
My high speed line is perfect and the old Airport works wonderfully, but won't do the other tasks nor is it portable for use on the road.
Is this a dead Airport Express or can I somehow make it work well. The light will be a steady yellow and show up 4 gray bars on my menu bar. Sometimes it blinks yellow. I haven't seen green since the first and only successful use, for one Internet session. The reset button does nothing.
I have paid Apple a fortune over the years, 27 computers, all the Apple software for all my machines and vidoe use. This is the first total failure. I'm very upset. Help Please
Thanks, Steve otherinfo>Airport Express Mac OS X (10.4.7) used with an iMac, PowerBook, iBooks, and soon to be four MacBook pros, I need it badly for travel

Hi Steven,
Have you tried a Hard Reset?
http://docs.info.apple.com/article.html?artnum=108044
Also, is the computers access this Airport Express have the latest Airport Software?
http://docs.info.apple.com/article.html?artnum=75422
After you get your Airport Express set up using Airport Setup Assistant make sure the Airport Express has the latest Firmware.
http://docs.info.apple.com/article.html?artnum=75422
Here is what the Lights mean on the Airport Express.
http://docs.info.apple.com/article.html?artnum=108045
I understand your frustration. Apple makes great products that don't fail to often, it makes it even more difficult to deal with.
I sure hope this helps..
Message was edited by: scooter

ITunes 10.2 Upgrade fix temporary. Fix to iTunes 10.2.2 by uninstall Apple Mobile Device Support and install AMDS from 10.0. Worked only to fail in 5 days. iTunes back to very slow to open and will not see device (iPhone) connected. Sorry

I was one this site for 20+ Days and found a fix for 10.2.1 when it failed. I Uninstalled all, following other attempts that failed, then installed latest Version from Apple iTunes 10.2.12. I then uninstalled Apple Mobile Device Support (AMDS) and installed AMDS from the older 10.0 version of iTunes. Success it worked. Today, I am now back to old problem, iTnes takes very long time to open and fails to see my device when connected (iPhone). I really only have iTunes for my iPhone no extensive library a few hundred CD's in music location and no podcasts. I have less than 6 moveis and want to update them now. I am willing to lose all in iTunes library if need be just to get computer to see G3 iPhone with iOS 4.2 and let me synch once again. I like security of backup too. It older iTunes may now not support, that too is OK. I still want to get the 3GS (no 4G desires, yet) and do not care if any of it is the latest from Apple as long as it works.

Hi Erik,
Your basic suggestion actually worked for me. But this is what I did for others who are having issues removing/installing etc.
1. Download the latest iTunes 8.2. You should end up with a file iTunesSetup.
2. If you dont already have WinRAR, download free copy from http://www.rarlab.com/ and install.
3. Right click on iTunesSetup and choose "Extract" to somewhere you know. eg C:\itunetemp
4. Open up folder where you extracted iTunesSetup and double-click applemobiledevicesupport.msi
5. It should ask you if you want to repair or remove... choose remove.
6. REBOOT your PC.
7. Go back to where you extracted iTunesSetup and double-click applemobiledevicesupport.msi and go through the install.
8. Plug in your iPhone.
If all is well iTunes should automatically start and start syncing your iPhone.
Goodluck all!
Cheers.

Will I be able to use my printer which is not wireless with the airport express and will it become a wireless printer ?

I have a wired printer and I need to know will the airport express work with this printer and will I be able to print wirelessly from my IPad ?

Can't print from iPad unless it's AirPrint able...
If it isn't you may want to check out Printopia.

Airport express and extreme not recognizing each other

i have an existing airport extreme wireless working.
dsl modem to airport extreme hardwired to mac g4 (with 200 gigs of music) streaming to new dell laptop from work.
just purchased airport express to stream music to home stereo via laptop utilizing the media from the desktop mac.
but i cannot get the 2 airports to see each other. the airport express keeps blinking amber. the manual says to open airport assisstant to add express to existing network but i have no such option listed.
i know there must be an easy solution but for the life of me i cannot figure out what it is.
any suggestions?
thanks,
gord
power mac g4 dual 450, 1 gig ram Mac OS X (10.4.7)

Try the following:
- Perform a "factory default" reset of the AX. (ref: http://docs.info.apple.com/article.html?artnum=108044_
- To facilitate setting up the remote/relay base stations, place them in near proximity of each other during the set up phase.
- Then perform the WDS setup as follows:
Set up the AirPort Extreme Base Station (AEBS) as the WDS Main Base Station, by connecting directly, using an Ethernet cable, to the LAN port of the AEBS, and then use the AirPort Admin Utility, located in /Applications/Utilities, to make the following settings.
WDS Tab
- Enable this base station as a WDS: main base station (checked)
- Enable wireless clients on this base station (optional)
- Click "+" to add Remote/Relay Base Stations.
-- Select the Base Station that you want to be the WDS Remote/Relay.
-- AirPort ID: <verify that this is the correct wireless MAC address for the Base Station you are adding as a Remote/Relay.
-- Auto configure as a WDS remote base station (checked)
-- Click "OK."
- Verify that the Remote/Relay Base Station has been added to the list.
- Click "Update," and then verify the settings for the Remote/Relay.
-- Allow wireless clients on this base station (checked)
-- New network name: <verify that this is the same as the network name for the AEBS>
-- TCP/IP: Configure using DHCP
-- Base Station Password: <the Remote/Relay Base Station password>
-- Confirm: <same as previous step>
-- Click "OK."

Airport Express that will not connect to broadband

We recently moved to China. I have tried everything I know and received some help from Apple telephone service and a local source but the Express will not work correctly with the incoming signal. I can hook my Powerbook G4 up to the incoming signal via ppoe with a password and I got the Express to work through a PC in the room acting as a server and using a hub, sort of. With the server I could get on Yahoo but nothing else will/would load. I tried the DNS server number but this did not help with the Express loading pages while using the PC server and hub. I had tried hard reset onthe Express a few times to no avail, though this was needed for it to work at all. I get a good signal from the Express and I get the green lock light but I do not get a true connection to the web.
Any help would be greatly appreciated as we have two macs and really need the wireless feed for the work we are doing at Jishou University.
John

Lorraine
I'll answer your question here - but if you want to continue this discussion please start a brand new discussion topic of your own. Your problem has very little in common with that of John Amato - just because the symptoms are "it doesn't work!" doesn't mean the problem is the same.
Yes, a Linksys wireless router will work perfectly with Macs equipped with an Airport card.
Since you installed an Airport card into your eMac - does your eMac now have an Airport menu item (the fan shaped icon near the right side of the MacOS menu bar)? If so, click on the Airport menu - and a list of in-range wireless networks will appear. Click on the name of your Linksys router's wireless network to connect to it. If your Linksys router is protected with a wireless security protocol and password, your Mac will now prompt you to enter the password - and to help you any further beyond this point I will need to have you tell us what protocol (WEP or WPA) you are using.
If your eMac:
- doesn't have an Airport card menu, then tell us exactly what model of eMac you are using
- doesn't show your Linksys router's name when you click on the Airport menu, recheck the Airport card installation inside your eMac and make sure you plugged the antenna cable connector into its socket on the Airport card AND you fully inserted that connector (which takes a fair bit of force).

Airport Express (2nd) will not extend existing Wi-Fi network

I am currently trying to extend my home Wi-Fi network (Virgin Super Hub 2) using an Airport Express (2nd generation). It will run on my up-to-date Mac or iOS devices.
I am not able to get the Express to extend the network no matter what I do. I have had this problem really since I had it just under 3 years ago, but only now I really need it to work.
When configuring the Express to extend the network it will either:
1. Stay continually flashing orange after applying update, then say unexpected error.
2. Or just go straight to unexpected error

An AEX will only extend a wireless network created by an Apple Airport Extreme Base Station. If will not extend a non-Apple router unless you run an Ethernet cable from the router to a location from which the AEX can create a new Wi-Fi network that covers the remote location. The AEX is configured to Join the existing network - bridge mode.

My new AirPort Express router will not stop blinking

I just bought a new AirPort Express. With the help of Time Warner, he gave me a new Modem and hooked everything together which included connecting router, modem to my husband's Windows PC. Now, the PC works great. My Apple IMac and Apple IPad work great and get the Wi-Fi very nicely. However, the AirPort Express unit continues to blink amber/orange and I don't think that is right. Should I do something or just leave it alone since everything is working great and I don't want to mess around the wires and cause things to stop working. Any help will be appreciated. Thanks.

Hello Peggy101
Check out the article below for more information about amber blinking lights on an Airport base station. When you use Airport Utility and click on the amber light it will list out what things that need to be corrected. You may not need to correct anything and can ignore certain errors.
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Regards,
-Norm G.

Help! My iTunes is getting stuck on the backup and will not go any further

I have just bought a new iPhone 4S and would like it to have everything that my iPhone 4 had on it but it is proving very difficult. I have tried multiple times to back up my old phone without success - I did think that with the cloud and all the new **** that I wouldn't need to plug my iPhones in ever again but this does not seem to be the case at all. I have managed to back up my old phone on my laptop and have since put my apps, contacts, calendars, messages etc onto my new phone but now I would like my music which is on my PC. This is where the problem is - iTunes on my PC will not back up my old phone and it will now not sync with my new phone either... Is there a way around this or will I have to suffer with having no music on my new phone?? It seems that everytime I upgrade my phone I always have some sort of issue with iTunes - I just thought this time would be different with the new software etc...?
If anyone has any advice on the subject it would be very very greatly appreciated.

Go to iTunes/Edit/Preferences/Devices and delete your latest backup. iTunes has to be able to read your backup in order to replace it, if it can't be read, iTunes will stop at step one, which is backing up the device.
You can copy your purchased items to your computer without syncing. Right click on your phone in the device list and choose
Message was edited by: Ingo2711

Upgraded to V 4; destroyed all my bookmarks and will not reload them? Just goes into 'not respnding' mode.

When I upgraded to beta Version 4.12 (?) the latest available anyway. At first the bookmarks tab would not work; nothing happened when I clicked on it. So could not access bookmarks and could not create new ones.
This seemed to correct itself yesterday; but now have lost all my bookmarks in total. It gives me the option to recover them; but when I try Firefox locks up; mouse turns to circulating circle and message at top of browser is 'not responding'.
This also causes memory resources to 'red line' and makes computer unusable.
CPU resources seem not to be affected.
I am using the 'SAM Find' add on tool bar; it was swamped with links to bookmarks I have never used when I upgraded. They have now been deleted and my tool bar seems to work as it was before I upgraded
I have two computers - Laptop (the focus of this Question) and a Desktop; both configured the same way. I upgraded the desktop to the beta when it was first available; it provides no upgrade path to the latest version without me physically downloading and installing the latest version. That I did yesterday.
Having done that I now have addon's on my laptop like InboxQ that work fine; but on desk top get message 'this version of Firefox does not support...'
While I am aware and understand this is a beta version I a discovering a number of inconsistencies in what I can do one one computer that I am unable on the other, even though I am running the same versions of the beta. To my knowledge both are setup the same and both running in the same environments.
I have to say I am less than happy not being able to access my book marks.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
You should avoid using the same Firefox profile with different Firefox versions.<br />
If you currently do then create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Upgraded iTunes no longer "sees" my airport express and will not network

Similar Messages

Maybe you are looking for